diff options
-rw-r--r-- | Documentation/powerpc/00-INDEX | 2 | ||||
-rw-r--r-- | Documentation/powerpc/pmu-ebb.txt | 137 | ||||
-rw-r--r-- | arch/powerpc/include/asm/perf_event_server.h | 6 | ||||
-rw-r--r-- | arch/powerpc/include/asm/processor.h | 3 | ||||
-rw-r--r-- | arch/powerpc/include/asm/reg.h | 8 | ||||
-rw-r--r-- | arch/powerpc/include/asm/switch_to.h | 14 | ||||
-rw-r--r-- | arch/powerpc/kernel/process.c | 4 | ||||
-rw-r--r-- | arch/powerpc/perf/core-book3s.c | 161 |
8 files changed, 321 insertions, 14 deletions
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index dd9e92802ec0..05026ce1875e 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -14,6 +14,8 @@ hvcs.txt - IBM "Hypervisor Virtual Console Server" Installation Guide mpc52xx.txt - Linux 2.6.x on MPC52xx family +pmu-ebb.txt + - Description of the API for using the PMU with Event Based Branches. qe_firmware.txt - describes the layout of firmware binaries for the Freescale QUICC Engine and the code that parses and uploads the microcode therein. diff --git a/Documentation/powerpc/pmu-ebb.txt b/Documentation/powerpc/pmu-ebb.txt new file mode 100644 index 000000000000..73cd163dbfb8 --- /dev/null +++ b/Documentation/powerpc/pmu-ebb.txt @@ -0,0 +1,137 @@ +PMU Event Based Branches +======================== + +Event Based Branches (EBBs) are a feature which allows the hardware to +branch directly to a specified user space address when certain events occur. + +The full specification is available in Power ISA v2.07: + + https://www.power.org/documentation/power-isa-version-2-07/ + +One type of event for which EBBs can be configured is PMU exceptions. This +document describes the API for configuring the Power PMU to generate EBBs, +using the Linux perf_events API. + + +Terminology +----------- + +Throughout this document we will refer to an "EBB event" or "EBB events". This +just refers to a struct perf_event which has set the "EBB" flag in its +attr.config. All events which can be configured on the hardware PMU are +possible "EBB events". + + +Background +---------- + +When a PMU EBB occurs it is delivered to the currently running process. As such +EBBs can only sensibly be used by programs for self-monitoring. + +It is a feature of the perf_events API that events can be created on other +processes, subject to standard permission checks. This is also true of EBB +events, however unless the target process enables EBBs (via mtspr(BESCR)) no +EBBs will ever be delivered. + +This makes it possible for a process to enable EBBs for itself, but not +actually configure any events. At a later time another process can come along +and attach an EBB event to the process, which will then cause EBBs to be +delivered to the first process. It's not clear if this is actually useful. + + +When the PMU is configured for EBBs, all PMU interrupts are delivered to the +user process. This means once an EBB event is scheduled on the PMU, no non-EBB +events can be configured. This means that EBB events can not be run +concurrently with regular 'perf' commands, or any other perf events. + +It is however safe to run 'perf' commands on a process which is using EBBs. The +kernel will in general schedule the EBB event, and perf will be notified that +its events could not run. + +The exclusion between EBB events and regular events is implemented using the +existing "pinned" and "exclusive" attributes of perf_events. This means EBB +events will be given priority over other events, unless they are also pinned. +If an EBB event and a regular event are both pinned, then whichever is enabled +first will be scheduled and the other will be put in error state. See the +section below titled "Enabling an EBB event" for more information. + + +Creating an EBB event +--------------------- + +To request that an event is counted using EBB, the event code should have bit +63 set. + +EBB events must be created with a particular, and restrictive, set of +attributes - this is so that they interoperate correctly with the rest of the +perf_events subsystem. + +An EBB event must be created with the "pinned" and "exclusive" attributes set. +Note that if you are creating a group of EBB events, only the leader can have +these attributes set. + +An EBB event must NOT set any of the "inherit", "sample_period", "freq" or +"enable_on_exec" attributes. + +An EBB event must be attached to a task. This is specified to perf_event_open() +by passing a pid value, typically 0 indicating the current task. + +All events in a group must agree on whether they want EBB. That is all events +must request EBB, or none may request EBB. + +EBB events must specify the PMC they are to be counted on. This ensures +userspace is able to reliably determine which PMC the event is scheduled on. + + +Enabling an EBB event +--------------------- + +Once an EBB event has been successfully opened, it must be enabled with the +perf_events API. This can be achieved either via the ioctl() interface, or the +prctl() interface. + +However, due to the design of the perf_events API, enabling an event does not +guarantee that it has been scheduled on the PMU. To ensure that the EBB event +has been scheduled on the PMU, you must perform a read() on the event. If the +read() returns EOF, then the event has not been scheduled and EBBs are not +enabled. + +This behaviour occurs because the EBB event is pinned and exclusive. When the +EBB event is enabled it will force all other non-pinned events off the PMU. In +this case the enable will be successful. However if there is already an event +pinned on the PMU then the enable will not be successful. + + +Reading an EBB event +-------------------- + +It is possible to read() from an EBB event. However the results are +meaningless. Because interrupts are being delivered to the user process the +kernel is not able to count the event, and so will return a junk value. + + +Closing an EBB event +-------------------- + +When an EBB event is finished with, you can close it using close() as for any +regular event. If this is the last EBB event the PMU will be deconfigured and +no further PMU EBBs will be delivered. + + +EBB Handler +----------- + +The EBB handler is just regular userspace code, however it must be written in +the style of an interrupt handler. When the handler is entered all registers +are live (possibly) and so must be saved somehow before the handler can invoke +other code. + +It's up to the program how to handle this. For C programs a relatively simple +option is to create an interrupt frame on the stack and save registers there. + +Fork +---- + +EBB events are not inherited across fork. If the child process wishes to use +EBBs it should open a new event for itself. Similarly the EBB state in +BESCR/EBBHR/EBBRR is cleared across fork(). diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index f265049dd7d6..2dd7bfc459be 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -60,6 +60,7 @@ struct power_pmu { #define PPMU_HAS_SSLOT 0x00000020 /* Has sampled slot in MMCRA */ #define PPMU_HAS_SIER 0x00000040 /* Has SIER */ #define PPMU_BHRB 0x00000080 /* has BHRB feature enabled */ +#define PPMU_EBB 0x00000100 /* supports event based branch */ /* * Values for flags to get_alternatives() @@ -68,6 +69,11 @@ struct power_pmu { #define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ #define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ +/* + * We use the event config bit 63 as a flag to request EBB. + */ +#define EVENT_CONFIG_EBB_SHIFT 63 + extern int register_power_pmu(struct power_pmu *); struct pt_regs; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 3f19df3cc7a3..47a35b08b963 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -287,8 +287,9 @@ struct thread_struct { unsigned long siar; unsigned long sdar; unsigned long sier; - unsigned long mmcr0; unsigned long mmcr2; + unsigned mmcr0; + unsigned used_ebb; #endif }; diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 362142b69d5b..5d7d9c2a5473 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -621,6 +621,9 @@ #define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ #define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ #define MMCR0_TBEE 0x00400000UL /* time base exception enable */ +#define MMCR0_EBE 0x00100000UL /* Event based branch enable */ +#define MMCR0_PMCC 0x000c0000UL /* PMC control */ +#define MMCR0_PMCC_U6 0x00080000UL /* PMC1-6 are R/W by user (PR) */ #define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ #define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/ #define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ @@ -674,6 +677,11 @@ #define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */ #define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */ +/* When EBB is enabled, some of MMCR0/MMCR2/SIER are user accessible */ +#define MMCR0_USER_MASK (MMCR0_FC | MMCR0_PMXE | MMCR0_PMAO) +#define MMCR2_USER_MASK 0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */ +#define SIER_USER_MASK 0x7fffffUL + #define SPRN_PA6T_MMCR0 795 #define PA6T_MMCR0_EN0 0x0000000000000001UL #define PA6T_MMCR0_EN1 0x0000000000000002UL diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h index 200d763a0a67..49a13e0ef234 100644 --- a/arch/powerpc/include/asm/switch_to.h +++ b/arch/powerpc/include/asm/switch_to.h @@ -67,4 +67,18 @@ static inline void flush_spe_to_thread(struct task_struct *t) } #endif +static inline void clear_task_ebb(struct task_struct *t) +{ +#ifdef CONFIG_PPC_BOOK3S_64 + /* EBB perf events are not inherited, so clear all EBB state. */ + t->thread.bescr = 0; + t->thread.mmcr2 = 0; + t->thread.mmcr0 = 0; + t->thread.siar = 0; + t->thread.sdar = 0; + t->thread.sier = 0; + t->thread.used_ebb = 0; +#endif +} + #endif /* _ASM_POWERPC_SWITCH_TO_H */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index b0f3e3f77e72..f8a76e6207bd 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -916,7 +916,11 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) flush_altivec_to_thread(src); flush_vsx_to_thread(src); flush_spe_to_thread(src); + *dst = *src; + + clear_task_ebb(dst); + return 0; } diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index c91dc43e04de..a3985aee77fe 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -77,6 +77,9 @@ static unsigned int freeze_events_kernel = MMCR0_FCS; #define MMCR0_PMCjCE MMCR0_PMCnCE #define MMCR0_FC56 0 #define MMCR0_PMAO 0 +#define MMCR0_EBE 0 +#define MMCR0_PMCC 0 +#define MMCR0_PMCC_U6 0 #define SPRN_MMCRA SPRN_MMCR2 #define MMCRA_SAMPLE_ENABLE 0 @@ -104,6 +107,15 @@ static inline int siar_valid(struct pt_regs *regs) return 1; } +static bool is_ebb_event(struct perf_event *event) { return false; } +static int ebb_event_check(struct perf_event *event) { return 0; } +static void ebb_event_add(struct perf_event *event) { } +static void ebb_switch_out(unsigned long mmcr0) { } +static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0) +{ + return mmcr0; +} + static inline void power_pmu_bhrb_enable(struct perf_event *event) {} static inline void power_pmu_bhrb_disable(struct perf_event *event) {} void power_pmu_flush_branch_stack(void) {} @@ -464,6 +476,89 @@ void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) return; } +static bool is_ebb_event(struct perf_event *event) +{ + /* + * This could be a per-PMU callback, but we'd rather avoid the cost. We + * check that the PMU supports EBB, meaning those that don't can still + * use bit 63 of the event code for something else if they wish. + */ + return (ppmu->flags & PPMU_EBB) && + ((event->attr.config >> EVENT_CONFIG_EBB_SHIFT) & 1); +} + +static int ebb_event_check(struct perf_event *event) +{ + struct perf_event *leader = event->group_leader; + + /* Event and group leader must agree on EBB */ + if (is_ebb_event(leader) != is_ebb_event(event)) + return -EINVAL; + + if (is_ebb_event(event)) { + if (!(event->attach_state & PERF_ATTACH_TASK)) + return -EINVAL; + + if (!leader->attr.pinned || !leader->attr.exclusive) + return -EINVAL; + + if (event->attr.inherit || event->attr.sample_period || + event->attr.enable_on_exec || event->attr.freq) + return -EINVAL; + } + + return 0; +} + +static void ebb_event_add(struct perf_event *event) +{ + if (!is_ebb_event(event) || current->thread.used_ebb) + return; + + /* + * IFF this is the first time we've added an EBB event, set + * PMXE in the user MMCR0 so we can detect when it's cleared by + * userspace. We need this so that we can context switch while + * userspace is in the EBB handler (where PMXE is 0). + */ + current->thread.used_ebb = 1; + current->thread.mmcr0 |= MMCR0_PMXE; +} + +static void ebb_switch_out(unsigned long mmcr0) +{ + if (!(mmcr0 & MMCR0_EBE)) + return; + + current->thread.siar = mfspr(SPRN_SIAR); + current->thread.sier = mfspr(SPRN_SIER); + current->thread.sdar = mfspr(SPRN_SDAR); + current->thread.mmcr0 = mmcr0 & MMCR0_USER_MASK; + current->thread.mmcr2 = mfspr(SPRN_MMCR2) & MMCR2_USER_MASK; +} + +static unsigned long ebb_switch_in(bool ebb, unsigned long mmcr0) +{ + if (!ebb) + goto out; + + /* Enable EBB and read/write to all 6 PMCs for userspace */ + mmcr0 |= MMCR0_EBE | MMCR0_PMCC_U6; + + /* Add any bits from the user reg, FC or PMAO */ + mmcr0 |= current->thread.mmcr0; + + /* Be careful not to set PMXE if userspace had it cleared */ + if (!(current->thread.mmcr0 & MMCR0_PMXE)) + mmcr0 &= ~MMCR0_PMXE; + + mtspr(SPRN_SIAR, current->thread.siar); + mtspr(SPRN_SIER, current->thread.sier); + mtspr(SPRN_SDAR, current->thread.sdar); + mtspr(SPRN_MMCR2, current->thread.mmcr2); +out: + return mmcr0; +} #endif /* CONFIG_PPC64 */ static void perf_event_interrupt(struct pt_regs *regs); @@ -734,6 +829,13 @@ static void power_pmu_read(struct perf_event *event) if (!event->hw.idx) return; + + if (is_ebb_event(event)) { + val = read_pmc(event->hw.idx); + local64_set(&event->hw.prev_count, val); + return; + } + /* * Performance monitor interrupts come even when interrupts * are soft-disabled, as long as interrupts are hard-enabled. @@ -854,7 +956,7 @@ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0) static void power_pmu_disable(struct pmu *pmu) { struct cpu_hw_events *cpuhw; - unsigned long flags, val; + unsigned long flags, mmcr0, val; if (!ppmu) return; @@ -871,11 +973,11 @@ static void power_pmu_disable(struct pmu *pmu) } /* - * Set the 'freeze counters' bit, clear PMAO/FC56. + * Set the 'freeze counters' bit, clear EBE/PMCC/PMAO/FC56. */ - val = mfspr(SPRN_MMCR0); + val = mmcr0 = mfspr(SPRN_MMCR0); val |= MMCR0_FC; - val &= ~(MMCR0_PMAO | MMCR0_FC56); + val &= ~(MMCR0_EBE | MMCR0_PMCC | MMCR0_PMAO | MMCR0_FC56); /* * The barrier is to make sure the mtspr has been @@ -896,7 +998,10 @@ static void power_pmu_disable(struct pmu *pmu) cpuhw->disabled = 1; cpuhw->n_added = 0; + + ebb_switch_out(mmcr0); } + local_irq_restore(flags); } @@ -911,15 +1016,15 @@ static void power_pmu_enable(struct pmu *pmu) struct cpu_hw_events *cpuhw; unsigned long flags; long i; - unsigned long val; + unsigned long val, mmcr0; s64 left; unsigned int hwc_index[MAX_HWEVENTS]; int n_lim; int idx; + bool ebb; if (!ppmu) return; - local_irq_save(flags); cpuhw = &__get_cpu_var(cpu_hw_events); @@ -934,6 +1039,13 @@ static void power_pmu_enable(struct pmu *pmu) cpuhw->disabled = 0; /* + * EBB requires an exclusive group and all events must have the EBB + * flag set, or not set, so we can just check a single event. Also we + * know we have at least one event. + */ + ebb = is_ebb_event(cpuhw->event[0]); + + /* * If we didn't change anything, or only removed events, * no need to recalculate MMCR* settings and reset the PMCs. * Just reenable the PMU with the current MMCR* settings @@ -1008,25 +1120,34 @@ static void power_pmu_enable(struct pmu *pmu) ++n_lim; continue; } - val = 0; - if (event->hw.sample_period) { - left = local64_read(&event->hw.period_left); - if (left < 0x80000000L) - val = 0x80000000L - left; + + if (ebb) + val = local64_read(&event->hw.prev_count); + else { + val = 0; + if (event->hw.sample_period) { + left = local64_read(&event->hw.period_left); + if (left < 0x80000000L) + val = 0x80000000L - left; + } + local64_set(&event->hw.prev_count, val); } - local64_set(&event->hw.prev_count, val); + event->hw.idx = idx; if (event->hw.state & PERF_HES_STOPPED) val = 0; write_pmc(idx, val); + perf_event_update_userpage(event); } cpuhw->n_limited = n_lim; cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE; out_enable: + mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]); + mb(); - write_mmcr0(cpuhw, cpuhw->mmcr[0]); + write_mmcr0(cpuhw, mmcr0); /* * Enable instruction sampling if necessary @@ -1124,6 +1245,8 @@ static int power_pmu_add(struct perf_event *event, int ef_flags) event->hw.config = cpuhw->events[n0]; nocheck: + ebb_event_add(event); + ++cpuhw->n_events; ++cpuhw->n_added; @@ -1484,6 +1607,11 @@ static int power_pmu_event_init(struct perf_event *event) } } + /* Extra checks for EBB */ + err = ebb_event_check(event); + if (err) + return err; + /* * If this is in a group, check if it can go on with all the * other hardware events in the group. We assume the event @@ -1523,6 +1651,13 @@ static int power_pmu_event_init(struct perf_event *event) local64_set(&event->hw.period_left, event->hw.last_period); /* + * For EBB events we just context switch the PMC value, we don't do any + * of the sample_period logic. We use hw.prev_count for this. + */ + if (is_ebb_event(event)) + local64_set(&event->hw.prev_count, 0); + + /* * See if we need to reserve the PMU. * If no events are currently in use, then we have to take a * mutex to ensure that we don't race with another task doing |