diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-01-01 12:58:07 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-01-01 12:58:07 -0800 |
commit | eda809aef53426d044b519405d25d9da55319b76 (patch) | |
tree | 31a7fabf4bdd816b1c6aedb70f6f44149a806288 /drivers | |
parent | 8b4805c68ae348b36a24a4c4b5c869c8971ab0c2 (diff) | |
parent | cb5253198f10a4cd79b7523c581e6173c7d49ddb (diff) |
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ide/ide-atapi.c | 1 | ||||
-rw-r--r-- | drivers/ide/ide-io.c | 7 | ||||
-rw-r--r-- | drivers/ide/ide-pm.c | 2 | ||||
-rw-r--r-- | drivers/scsi/cxgbi/cxgb4i/Kconfig | 1 | ||||
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 2 | ||||
-rw-r--r-- | drivers/scsi/scsi_lib.c | 27 | ||||
-rw-r--r-- | drivers/scsi/scsi_transport_spi.c | 27 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufs-mediatek-trace.h | 2 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufs-mediatek.c | 21 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufs-mediatek.h | 1 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufs.h | 2 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufshcd-pci.c | 73 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 45 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufshcd.h | 14 |
14 files changed, 166 insertions, 59 deletions
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 2162bc80f09e..013ad33fbbc8 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -223,7 +223,6 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) sense_rq->rq_disk = rq->rq_disk; sense_rq->cmd_flags = REQ_OP_DRV_IN; ide_req(sense_rq)->type = ATA_PRIV_SENSE; - sense_rq->rq_flags |= RQF_PREEMPT; req->cmd[0] = GPCMD_REQUEST_SENSE; req->cmd[4] = cmd_len; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1a53c7a75224..4867b67b60d6 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -515,15 +515,10 @@ repeat: * above to return us whatever is in the queue. Since we call * ide_do_request() ourselves, we end up taking requests while * the queue is blocked... - * - * We let requests forced at head of queue with ide-preempt - * though. I hope that doesn't happen too much, hopefully not - * unless the subdriver triggers such a thing in its own PM - * state machine. */ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) && ata_pm_request(rq) == 0 && - (rq->rq_flags & RQF_PREEMPT) == 0) { + (rq->rq_flags & RQF_PM) == 0) { /* there should be no pending command at this point */ ide_unlock_port(hwif); goto plug_device; diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 192e6c65d34e..82ab308f1aaf 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -77,7 +77,7 @@ int generic_ide_resume(struct device *dev) } memset(&rqpm, 0, sizeof(rqpm)); - rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PREEMPT); + rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PM); ide_req(rq)->type = ATA_PRIV_PM_RESUME; ide_req(rq)->special = &rqpm; rqpm.pm_step = IDE_PM_START_RESUME; diff --git a/drivers/scsi/cxgbi/cxgb4i/Kconfig b/drivers/scsi/cxgbi/cxgb4i/Kconfig index b206e266b4e7..8b0deece9758 100644 --- a/drivers/scsi/cxgbi/cxgb4i/Kconfig +++ b/drivers/scsi/cxgbi/cxgb4i/Kconfig @@ -4,6 +4,7 @@ config SCSI_CXGB4_ISCSI depends on PCI && INET && (IPV6 || IPV6=n) depends on THERMAL || !THERMAL depends on ETHERNET + depends on TLS || TLS=n select NET_VENDOR_CHELSIO select CHELSIO_T4 select CHELSIO_LIB diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 969baf4cd3f5..6e23dc3209fe 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5034,7 +5034,7 @@ _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) static void _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { - u16 trigger_flags; + int trigger_flags; /* * Default setting of master trigger. diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 4848ae3c7b56..b3f14f05340a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -249,7 +249,8 @@ int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, req = blk_get_request(sdev->request_queue, data_direction == DMA_TO_DEVICE ? - REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, BLK_MQ_REQ_PREEMPT); + REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, + rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0); if (IS_ERR(req)) return ret; rq = scsi_req(req); @@ -1206,6 +1207,8 @@ static blk_status_t scsi_device_state_check(struct scsi_device *sdev, struct request *req) { switch (sdev->sdev_state) { + case SDEV_CREATED: + return BLK_STS_OK; case SDEV_OFFLINE: case SDEV_TRANSPORT_OFFLINE: /* @@ -1232,18 +1235,18 @@ scsi_device_state_check(struct scsi_device *sdev, struct request *req) return BLK_STS_RESOURCE; case SDEV_QUIESCE: /* - * If the devices is blocked we defer normal commands. + * If the device is blocked we only accept power management + * commands. */ - if (req && !(req->rq_flags & RQF_PREEMPT)) + if (req && WARN_ON_ONCE(!(req->rq_flags & RQF_PM))) return BLK_STS_RESOURCE; return BLK_STS_OK; default: /* * For any other not fully online state we only allow - * special commands. In particular any user initiated - * command is not allowed. + * power management commands. */ - if (req && !(req->rq_flags & RQF_PREEMPT)) + if (req && !(req->rq_flags & RQF_PM)) return BLK_STS_IOERR; return BLK_STS_OK; } @@ -2516,15 +2519,13 @@ void sdev_evt_send_simple(struct scsi_device *sdev, EXPORT_SYMBOL_GPL(sdev_evt_send_simple); /** - * scsi_device_quiesce - Block user issued commands. + * scsi_device_quiesce - Block all commands except power management. * @sdev: scsi device to quiesce. * * This works by trying to transition to the SDEV_QUIESCE state * (which must be a legal transition). When the device is in this - * state, only special requests will be accepted, all others will - * be deferred. Since special requests may also be requeued requests, - * a successful return doesn't guarantee the device will be - * totally quiescent. + * state, only power management requests will be accepted, all others will + * be deferred. * * Must be called with user context, may sleep. * @@ -2586,12 +2587,12 @@ void scsi_device_resume(struct scsi_device *sdev) * device deleted during suspend) */ mutex_lock(&sdev->state_mutex); + if (sdev->sdev_state == SDEV_QUIESCE) + scsi_device_set_state(sdev, SDEV_RUNNING); if (sdev->quiesced_by) { sdev->quiesced_by = NULL; blk_clear_pm_only(sdev->request_queue); } - if (sdev->sdev_state == SDEV_QUIESCE) - scsi_device_set_state(sdev, SDEV_RUNNING); mutex_unlock(&sdev->state_mutex); } EXPORT_SYMBOL(scsi_device_resume); diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index f3d5b1bbd5aa..c37dd15d16d2 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -117,12 +117,16 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd, sshdr = &sshdr_tmp; for(i = 0; i < DV_RETRIES; i++) { + /* + * The purpose of the RQF_PM flag below is to bypass the + * SDEV_QUIESCE state. + */ result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense, sshdr, DV_TIMEOUT, /* retries */ 1, REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER, - 0, NULL); + RQF_PM, NULL); if (driver_byte(result) != DRIVER_SENSE || sshdr->sense_key != UNIT_ATTENTION) break; @@ -1005,23 +1009,26 @@ spi_dv_device(struct scsi_device *sdev) */ lock_system_sleep(); + if (scsi_autopm_get_device(sdev)) + goto unlock_system_sleep; + if (unlikely(spi_dv_in_progress(starget))) - goto unlock; + goto put_autopm; if (unlikely(scsi_device_get(sdev))) - goto unlock; + goto put_autopm; spi_dv_in_progress(starget) = 1; buffer = kzalloc(len, GFP_KERNEL); if (unlikely(!buffer)) - goto out_put; + goto put_sdev; /* We need to verify that the actual device will quiesce; the * later target quiesce is just a nice to have */ if (unlikely(scsi_device_quiesce(sdev))) - goto out_free; + goto free_buffer; scsi_target_quiesce(starget); @@ -1041,12 +1048,16 @@ spi_dv_device(struct scsi_device *sdev) spi_initial_dv(starget) = 1; - out_free: +free_buffer: kfree(buffer); - out_put: + +put_sdev: spi_dv_in_progress(starget) = 0; scsi_device_put(sdev); -unlock: +put_autopm: + scsi_autopm_put_device(sdev); + +unlock_system_sleep: unlock_system_sleep(); } EXPORT_SYMBOL(spi_dv_device); diff --git a/drivers/scsi/ufs/ufs-mediatek-trace.h b/drivers/scsi/ufs/ufs-mediatek-trace.h index fd6f84c1b4e2..895e82ea6ece 100644 --- a/drivers/scsi/ufs/ufs-mediatek-trace.h +++ b/drivers/scsi/ufs/ufs-mediatek-trace.h @@ -31,6 +31,6 @@ TRACE_EVENT(ufs_mtk_event, #undef TRACE_INCLUDE_PATH #undef TRACE_INCLUDE_FILE -#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_PATH ../../drivers/scsi/ufs/ #define TRACE_INCLUDE_FILE ufs-mediatek-trace #include <trace/define_trace.h> diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c index 3522458db3bb..80618af7c872 100644 --- a/drivers/scsi/ufs/ufs-mediatek.c +++ b/drivers/scsi/ufs/ufs-mediatek.c @@ -70,6 +70,13 @@ static bool ufs_mtk_is_va09_supported(struct ufs_hba *hba) return !!(host->caps & UFS_MTK_CAP_VA09_PWR_CTRL); } +static bool ufs_mtk_is_broken_vcc(struct ufs_hba *hba) +{ + struct ufs_mtk_host *host = ufshcd_get_variant(hba); + + return !!(host->caps & UFS_MTK_CAP_BROKEN_VCC); +} + static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable) { u32 tmp; @@ -514,6 +521,9 @@ static void ufs_mtk_init_host_caps(struct ufs_hba *hba) if (of_property_read_bool(np, "mediatek,ufs-disable-ah8")) host->caps |= UFS_MTK_CAP_DISABLE_AH8; + if (of_property_read_bool(np, "mediatek,ufs-broken-vcc")) + host->caps |= UFS_MTK_CAP_BROKEN_VCC; + dev_info(hba->dev, "caps: 0x%x", host->caps); } @@ -1003,6 +1013,17 @@ static int ufs_mtk_apply_dev_quirks(struct ufs_hba *hba) static void ufs_mtk_fixup_dev_quirks(struct ufs_hba *hba) { ufshcd_fixup_dev_quirks(hba, ufs_mtk_dev_fixups); + + if (ufs_mtk_is_broken_vcc(hba) && hba->vreg_info.vcc && + (hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_AFTER_LPM)) { + hba->vreg_info.vcc->always_on = true; + /* + * VCC will be kept always-on thus we don't + * need any delay during regulator operations + */ + hba->dev_quirks &= ~(UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM | + UFS_DEVICE_QUIRK_DELAY_AFTER_LPM); + } } static void ufs_mtk_event_notify(struct ufs_hba *hba, diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h index 93d35097dfb0..3f0d3bb769e8 100644 --- a/drivers/scsi/ufs/ufs-mediatek.h +++ b/drivers/scsi/ufs/ufs-mediatek.h @@ -81,6 +81,7 @@ enum ufs_mtk_host_caps { UFS_MTK_CAP_BOOST_CRYPT_ENGINE = 1 << 0, UFS_MTK_CAP_VA09_PWR_CTRL = 1 << 1, UFS_MTK_CAP_DISABLE_AH8 = 1 << 2, + UFS_MTK_CAP_BROKEN_VCC = 1 << 3, }; struct ufs_mtk_crypt_cfg { diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index d593edb48767..14dfda735adf 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -330,7 +330,6 @@ enum { UFS_DEV_WRITE_BOOSTER_SUP = BIT(8), }; -#define POWER_DESC_MAX_SIZE 0x62 #define POWER_DESC_MAX_ACTV_ICC_LVLS 16 /* Attribute bActiveICCLevel parameter bit masks definitions */ @@ -513,6 +512,7 @@ struct ufs_query_res { struct ufs_vreg { struct regulator *reg; const char *name; + bool always_on; bool enabled; int min_uV; int max_uV; diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index df3a564c3e33..fadd566025b8 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -148,6 +148,8 @@ static int ufs_intel_common_init(struct ufs_hba *hba) { struct intel_host *host; + hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND; + host = devm_kzalloc(hba->dev, sizeof(*host), GFP_KERNEL); if (!host) return -ENOMEM; @@ -163,6 +165,41 @@ static void ufs_intel_common_exit(struct ufs_hba *hba) intel_ltr_hide(hba->dev); } +static int ufs_intel_resume(struct ufs_hba *hba, enum ufs_pm_op op) +{ + /* + * To support S4 (suspend-to-disk) with spm_lvl other than 5, the base + * address registers must be restored because the restore kernel can + * have used different addresses. + */ + ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_H); + ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_H); + + if (ufshcd_is_link_hibern8(hba)) { + int ret = ufshcd_uic_hibern8_exit(hba); + + if (!ret) { + ufshcd_set_link_active(hba); + } else { + dev_err(hba->dev, "%s: hibern8 exit failed %d\n", + __func__, ret); + /* + * Force reset and restore. Any other actions can lead + * to an unrecoverable state. + */ + ufshcd_set_link_off(hba); + } + } + + return 0; +} + static int ufs_intel_ehl_init(struct ufs_hba *hba) { hba->quirks |= UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8; @@ -174,6 +211,7 @@ static struct ufs_hba_variant_ops ufs_intel_cnl_hba_vops = { .init = ufs_intel_common_init, .exit = ufs_intel_common_exit, .link_startup_notify = ufs_intel_link_startup_notify, + .resume = ufs_intel_resume, }; static struct ufs_hba_variant_ops ufs_intel_ehl_hba_vops = { @@ -181,6 +219,7 @@ static struct ufs_hba_variant_ops ufs_intel_ehl_hba_vops = { .init = ufs_intel_ehl_init, .exit = ufs_intel_common_exit, .link_startup_notify = ufs_intel_link_startup_notify, + .resume = ufs_intel_resume, }; #ifdef CONFIG_PM_SLEEP @@ -207,6 +246,30 @@ static int ufshcd_pci_resume(struct device *dev) { return ufshcd_system_resume(dev_get_drvdata(dev)); } + +/** + * ufshcd_pci_poweroff - suspend-to-disk poweroff function + * @dev: pointer to PCI device handle + * + * Returns 0 if successful + * Returns non-zero otherwise + */ +static int ufshcd_pci_poweroff(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + int spm_lvl = hba->spm_lvl; + int ret; + + /* + * For poweroff we need to set the UFS device to PowerDown mode. + * Force spm_lvl to ensure that. + */ + hba->spm_lvl = 5; + ret = ufshcd_system_suspend(hba); + hba->spm_lvl = spm_lvl; + return ret; +} + #endif /* !CONFIG_PM_SLEEP */ #ifdef CONFIG_PM @@ -302,8 +365,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) } static const struct dev_pm_ops ufshcd_pci_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(ufshcd_pci_suspend, - ufshcd_pci_resume) +#ifdef CONFIG_PM_SLEEP + .suspend = ufshcd_pci_suspend, + .resume = ufshcd_pci_resume, + .freeze = ufshcd_pci_suspend, + .thaw = ufshcd_pci_resume, + .poweroff = ufshcd_pci_poweroff, + .restore = ufshcd_pci_resume, +#endif SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend, ufshcd_pci_runtime_resume, ufshcd_pci_runtime_idle) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 9902b7e3aa4a..82ad31781bc9 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -225,6 +225,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba); static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); static void ufshcd_hba_exit(struct ufs_hba *hba); +static int ufshcd_clear_ua_wluns(struct ufs_hba *hba); static int ufshcd_probe_hba(struct ufs_hba *hba, bool async); static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); @@ -580,6 +581,23 @@ static void ufshcd_print_pwr_info(struct ufs_hba *hba) hba->pwr_info.hs_rate); } +static void ufshcd_device_reset(struct ufs_hba *hba) +{ + int err; + + err = ufshcd_vops_device_reset(hba); + + if (!err) { + ufshcd_set_ufs_dev_active(hba); + if (ufshcd_is_wb_allowed(hba)) { + hba->wb_enabled = false; + hba->wb_buf_flush_enabled = false; + } + } + if (err != -EOPNOTSUPP) + ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err); +} + void ufshcd_delay_us(unsigned long us, unsigned long tolerance) { if (!us) @@ -3665,7 +3683,7 @@ static int ufshcd_dme_enable(struct ufs_hba *hba) ret = ufshcd_send_uic_cmd(hba, &uic_cmd); if (ret) dev_err(hba->dev, - "dme-reset: error code %d\n", ret); + "dme-enable: error code %d\n", ret); return ret; } @@ -3964,7 +3982,7 @@ int ufshcd_link_recovery(struct ufs_hba *hba) spin_unlock_irqrestore(hba->host->host_lock, flags); /* Reset the attached device */ - ufshcd_vops_device_reset(hba); + ufshcd_device_reset(hba); ret = ufshcd_host_reset_and_restore(hba); @@ -6930,7 +6948,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) /* Establish the link again and restore the device */ err = ufshcd_probe_hba(hba, false); - + if (!err) + ufshcd_clear_ua_wluns(hba); out: if (err) dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err); @@ -6968,7 +6987,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba) do { /* Reset the attached device */ - ufshcd_vops_device_reset(hba); + ufshcd_device_reset(hba); err = ufshcd_host_reset_and_restore(hba); } while (err && --retries); @@ -8045,7 +8064,7 @@ static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg) { int ret = 0; - if (!vreg || !vreg->enabled) + if (!vreg || !vreg->enabled || vreg->always_on) goto out; ret = regulator_disable(vreg->reg); @@ -8414,13 +8433,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, * handling context. */ hba->host->eh_noresume = 1; - if (hba->wlun_dev_clr_ua) { - ret = ufshcd_send_request_sense(hba, sdp); - if (ret) - goto out; - /* Unit attention condition is cleared now */ - hba->wlun_dev_clr_ua = false; - } + ufshcd_clear_ua_wluns(hba); cmd[4] = pwr_mode << 4; @@ -8441,7 +8454,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, if (!ret) hba->curr_dev_pwr_mode = pwr_mode; -out: + scsi_device_put(sdp); hba->host->eh_noresume = 0; return ret; @@ -8747,7 +8760,7 @@ set_link_active: * further below. */ if (ufshcd_is_ufs_dev_deepsleep(hba)) { - ufshcd_vops_device_reset(hba); + ufshcd_device_reset(hba); WARN_ON(!ufshcd_is_link_off(hba)); } if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba)) @@ -8757,7 +8770,7 @@ set_link_active: set_dev_active: /* Can also get here needing to exit DeepSleep */ if (ufshcd_is_ufs_dev_deepsleep(hba)) { - ufshcd_vops_device_reset(hba); + ufshcd_device_reset(hba); ufshcd_host_reset_and_restore(hba); } if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) @@ -9353,7 +9366,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) } /* Reset the attached device */ - ufshcd_vops_device_reset(hba); + ufshcd_device_reset(hba); ufshcd_init_crypto(hba); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index f8c2467dc014..aa9ea3552323 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -1218,16 +1218,12 @@ static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba) hba->vops->dbg_register_dump(hba); } -static inline void ufshcd_vops_device_reset(struct ufs_hba *hba) +static inline int ufshcd_vops_device_reset(struct ufs_hba *hba) { - if (hba->vops && hba->vops->device_reset) { - int err = hba->vops->device_reset(hba); - - if (!err) - ufshcd_set_ufs_dev_active(hba); - if (err != -EOPNOTSUPP) - ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err); - } + if (hba->vops && hba->vops->device_reset) + return hba->vops->device_reset(hba); + + return -EOPNOTSUPP; } static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba, |