summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorRafael J. Wysocki <rafael.j.wysocki@intel.com>2016-01-12 01:08:47 +0100
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2016-01-12 01:08:47 +0100
commit1e3f28a552c7acf6dd8acfe505beb4990e8cbd55 (patch)
treec501d538faa010b2a503ab79aba104bf12e76a12 /drivers
parent989652871b06f1fb173bc5e8e2ea03bec8f8eeeb (diff)
parentd35818a9153e7f230fd65dc935e001a1b9bc08ff (diff)
Merge branch 'acpi-soc'
* acpi-soc: PM / clk: don't leave clocks enabled when driver not bound i2c: dw: Add APM X-Gene ACPI I2C device support ACPI / APD: Add APM X-Gene ACPI I2C device support ACPI / LPSS: change 'does not have' to 'has' in comment Revert "dmaengine: dw: platform: provide platform data for Intel" dmaengine: dw: return immediately from IRQ when DMA isn't in use dmaengine: dw: platform: power on device on shutdown ACPI / LPSS: override power state for LPSS DMA device ACPI / LPSS: power on when probe() and otherwise when remove() ACPI / LPSS: do delay for all LPSS devices when D3->D0 ACPI / LPSS: allow to use specific PM domain during ->probe() Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()" device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification x86/platform/iosf_mbi: Remove duplicate definitions Conflicts: drivers/i2c/busses/i2c-designware-platdrv.c
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpi_apd.c16
-rw-r--r--drivers/acpi/acpi_lpss.c213
-rw-r--r--drivers/base/dd.c10
-rw-r--r--drivers/base/power/clock_ops.c1
-rw-r--r--drivers/dma/dw/core.c9
-rw-r--r--drivers/dma/dw/platform.c29
-rw-r--r--drivers/i2c/busses/i2c-designware-baytrail.c17
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c1
-rw-r--r--drivers/powercap/intel_rapl.c10
-rw-r--r--drivers/thermal/intel_quark_dts_thermal.c61
-rw-r--r--drivers/thermal/intel_soc_dts_iosf.c43
11 files changed, 305 insertions, 105 deletions
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index a450e7af877c..d507cf6deda0 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -51,7 +51,7 @@ struct apd_private_data {
const struct apd_device_desc *dev_desc;
};
-#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
+#if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
#define APD_ADDR(desc) ((unsigned long)&desc)
static int acpi_apd_setup(struct apd_private_data *pdata)
@@ -71,6 +71,7 @@ static int acpi_apd_setup(struct apd_private_data *pdata)
return 0;
}
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
static struct apd_device_desc cz_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 133000000,
@@ -80,6 +81,14 @@ static struct apd_device_desc cz_uart_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 48000000,
};
+#endif
+
+#ifdef CONFIG_ARM64
+static struct apd_device_desc xgene_i2c_desc = {
+ .setup = acpi_apd_setup,
+ .fixed_clk_rate = 100000000,
+};
+#endif
#else
@@ -132,9 +141,14 @@ static int acpi_apd_create_device(struct acpi_device *adev,
static const struct acpi_device_id acpi_apd_device_ids[] = {
/* Generic apd devices */
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
{ "AMD0010", APD_ADDR(cz_i2c_desc) },
{ "AMD0020", APD_ADDR(cz_uart_desc) },
{ "AMD0030", },
+#endif
+#ifdef CONFIG_ARM64
+ { "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
+#endif
{ }
};
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index f9e0d09f7c66..047281a6ae11 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -15,6 +15,7 @@
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/platform_data/clk-lpss.h>
#include <linux/pm_runtime.h>
@@ -26,6 +27,10 @@ ACPI_MODULE_NAME("acpi_lpss");
#ifdef CONFIG_X86_INTEL_LPSS
+#include <asm/cpu_device_id.h>
+#include <asm/iosf_mbi.h>
+#include <asm/pmc_atom.h>
+
#define LPSS_ADDR(desc) ((unsigned long)&desc)
#define LPSS_CLK_SIZE 0x04
@@ -71,7 +76,7 @@ struct lpss_device_desc {
void (*setup)(struct lpss_private_data *pdata);
};
-static struct lpss_device_desc lpss_dma_desc = {
+static const struct lpss_device_desc lpss_dma_desc = {
.flags = LPSS_CLK,
};
@@ -84,6 +89,23 @@ struct lpss_private_data {
u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
};
+/* LPSS run time quirks */
+static unsigned int lpss_quirks;
+
+/*
+ * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
+ *
+ * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
+ * it can be powered off automatically whenever the last LPSS device goes down.
+ * In case of no power any access to the DMA controller will hang the system.
+ * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
+ * well as on ASuS T100TA transformer.
+ *
+ * This quirk overrides power state of entire LPSS island to keep DMA powered
+ * on whenever we have at least one other device in use.
+ */
+#define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0)
+
/* UART Component Parameter Register */
#define LPSS_UART_CPR 0xF4
#define LPSS_UART_CPR_AFCE BIT(4)
@@ -196,13 +218,21 @@ static const struct lpss_device_desc bsw_i2c_dev_desc = {
.setup = byt_i2c_setup,
};
-static struct lpss_device_desc bsw_spi_dev_desc = {
+static const struct lpss_device_desc bsw_spi_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
| LPSS_NO_D3_DELAY,
.prv_offset = 0x400,
.setup = lpss_deassert_reset,
};
+#define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
+
+static const struct x86_cpu_id lpss_cpu_ids[] = {
+ ICPU(0x37), /* Valleyview, Bay Trail */
+ ICPU(0x4c), /* Braswell, Cherry Trail */
+ {}
+};
+
#else
#define LPSS_ADDR(desc) (0UL)
@@ -574,6 +604,17 @@ static void acpi_lpss_restore_ctx(struct device *dev,
{
unsigned int i;
+ for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
+ unsigned long offset = i * sizeof(u32);
+
+ __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
+ dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
+ pdata->prv_reg_ctx[i], offset);
+ }
+}
+
+static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
+{
/*
* The following delay is needed or the subsequent write operations may
* fail. The LPSS devices are actually PCI devices and the PCI spec
@@ -586,14 +627,34 @@ static void acpi_lpss_restore_ctx(struct device *dev,
delay = 0;
msleep(delay);
+}
- for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
- unsigned long offset = i * sizeof(u32);
+static int acpi_lpss_activate(struct device *dev)
+{
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
- __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
- dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
- pdata->prv_reg_ctx[i], offset);
- }
+ ret = acpi_dev_runtime_resume(dev);
+ if (ret)
+ return ret;
+
+ acpi_lpss_d3_to_d0_delay(pdata);
+
+ /*
+ * This is called only on ->probe() stage where a device is either in
+ * known state defined by BIOS or most likely powered off. Due to this
+ * we have to deassert reset line to be sure that ->probe() will
+ * recognize the device.
+ */
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ lpss_deassert_reset(pdata);
+
+ return 0;
+}
+
+static void acpi_lpss_dismiss(struct device *dev)
+{
+ acpi_dev_runtime_suspend(dev);
}
#ifdef CONFIG_PM_SLEEP
@@ -621,6 +682,8 @@ static int acpi_lpss_resume_early(struct device *dev)
if (ret)
return ret;
+ acpi_lpss_d3_to_d0_delay(pdata);
+
if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
acpi_lpss_restore_ctx(dev, pdata);
@@ -628,6 +691,89 @@ static int acpi_lpss_resume_early(struct device *dev)
}
#endif /* CONFIG_PM_SLEEP */
+/* IOSF SB for LPSS island */
+#define LPSS_IOSF_UNIT_LPIOEP 0xA0
+#define LPSS_IOSF_UNIT_LPIO1 0xAB
+#define LPSS_IOSF_UNIT_LPIO2 0xAC
+
+#define LPSS_IOSF_PMCSR 0x84
+#define LPSS_PMCSR_D0 0
+#define LPSS_PMCSR_D3hot 3
+#define LPSS_PMCSR_Dx_MASK GENMASK(1, 0)
+
+#define LPSS_IOSF_GPIODEF0 0x154
+#define LPSS_GPIODEF0_DMA1_D3 BIT(2)
+#define LPSS_GPIODEF0_DMA2_D3 BIT(3)
+#define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2)
+
+static DEFINE_MUTEX(lpss_iosf_mutex);
+
+static void lpss_iosf_enter_d3_state(void)
+{
+ u32 value1 = 0;
+ u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK;
+ u32 value2 = LPSS_PMCSR_D3hot;
+ u32 mask2 = LPSS_PMCSR_Dx_MASK;
+ /*
+ * PMC provides an information about actual status of the LPSS devices.
+ * Here we read the values related to LPSS power island, i.e. LPSS
+ * devices, excluding both LPSS DMA controllers, along with SCC domain.
+ */
+ u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
+ int ret;
+
+ ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
+ if (ret)
+ return;
+
+ mutex_lock(&lpss_iosf_mutex);
+
+ ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
+ if (ret)
+ goto exit;
+
+ /*
+ * Get the status of entire LPSS power island per device basis.
+ * Shutdown both LPSS DMA controllers if and only if all other devices
+ * are already in D3hot.
+ */
+ pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
+ if (pmc_status)
+ goto exit;
+
+ iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
+ LPSS_IOSF_PMCSR, value2, mask2);
+
+ iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
+ LPSS_IOSF_PMCSR, value2, mask2);
+
+ iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
+ LPSS_IOSF_GPIODEF0, value1, mask1);
+exit:
+ mutex_unlock(&lpss_iosf_mutex);
+}
+
+static void lpss_iosf_exit_d3_state(void)
+{
+ u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3;
+ u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK;
+ u32 value2 = LPSS_PMCSR_D0;
+ u32 mask2 = LPSS_PMCSR_Dx_MASK;
+
+ mutex_lock(&lpss_iosf_mutex);
+
+ iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
+ LPSS_IOSF_GPIODEF0, value1, mask1);
+
+ iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
+ LPSS_IOSF_PMCSR, value2, mask2);
+
+ iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
+ LPSS_IOSF_PMCSR, value2, mask2);
+
+ mutex_unlock(&lpss_iosf_mutex);
+}
+
static int acpi_lpss_runtime_suspend(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
@@ -640,7 +786,17 @@ static int acpi_lpss_runtime_suspend(struct device *dev)
if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
acpi_lpss_save_ctx(dev, pdata);
- return acpi_dev_runtime_suspend(dev);
+ ret = acpi_dev_runtime_suspend(dev);
+
+ /*
+ * This call must be last in the sequence, otherwise PMC will return
+ * wrong status for devices being about to be powered off. See
+ * lpss_iosf_enter_d3_state() for further information.
+ */
+ if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
+ lpss_iosf_enter_d3_state();
+
+ return ret;
}
static int acpi_lpss_runtime_resume(struct device *dev)
@@ -648,10 +804,19 @@ static int acpi_lpss_runtime_resume(struct device *dev)
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
int ret;
+ /*
+ * This call is kept first to be in symmetry with
+ * acpi_lpss_runtime_suspend() one.
+ */
+ if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
+ lpss_iosf_exit_d3_state();
+
ret = acpi_dev_runtime_resume(dev);
if (ret)
return ret;
+ acpi_lpss_d3_to_d0_delay(pdata);
+
if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
acpi_lpss_restore_ctx(dev, pdata);
@@ -660,6 +825,10 @@ static int acpi_lpss_runtime_resume(struct device *dev)
#endif /* CONFIG_PM */
static struct dev_pm_domain acpi_lpss_pm_domain = {
+#ifdef CONFIG_PM
+ .activate = acpi_lpss_activate,
+ .dismiss = acpi_lpss_dismiss,
+#endif
.ops = {
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
@@ -705,8 +874,14 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
}
switch (action) {
- case BUS_NOTIFY_ADD_DEVICE:
+ case BUS_NOTIFY_BIND_DRIVER:
pdev->dev.pm_domain = &acpi_lpss_pm_domain;
+ break;
+ case BUS_NOTIFY_DRIVER_NOT_BOUND:
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ pdev->dev.pm_domain = NULL;
+ break;
+ case BUS_NOTIFY_ADD_DEVICE:
if (pdata->dev_desc->flags & LPSS_LTR)
return sysfs_create_group(&pdev->dev.kobj,
&lpss_attr_group);
@@ -714,7 +889,6 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
case BUS_NOTIFY_DEL_DEVICE:
if (pdata->dev_desc->flags & LPSS_LTR)
sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
- pdev->dev.pm_domain = NULL;
break;
default:
break;
@@ -754,10 +928,19 @@ static struct acpi_scan_handler lpss_handler = {
void __init acpi_lpss_init(void)
{
- if (!lpt_clk_init()) {
- bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
- acpi_scan_add_handler(&lpss_handler);
- }
+ const struct x86_cpu_id *id;
+ int ret;
+
+ ret = lpt_clk_init();
+ if (ret)
+ return;
+
+ id = x86_match_cpu(lpss_cpu_ids);
+ if (id)
+ lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
+
+ bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
+ acpi_scan_add_handler(&lpss_handler);
}
#else
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index a641cf3ccad6..03697043344a 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -268,6 +268,9 @@ int device_bind_driver(struct device *dev)
ret = driver_sysfs_add(dev);
if (!ret)
driver_bound(dev);
+ else if (dev->bus)
+ blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
+ BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
return ret;
}
EXPORT_SYMBOL_GPL(device_bind_driver);
@@ -290,7 +293,7 @@ static int really_probe(struct device *dev, struct device_driver *drv)
/* If using pinctrl, bind pins now before probing */
ret = pinctrl_bind_pins(dev);
if (ret)
- goto probe_failed;
+ goto pinctrl_bind_failed;
if (driver_sysfs_add(dev)) {
printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
@@ -334,6 +337,10 @@ static int really_probe(struct device *dev, struct device_driver *drv)
goto done;
probe_failed:
+ if (dev->bus)
+ blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
+ BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
+pinctrl_bind_failed:
devres_release_all(dev);
driver_sysfs_remove(dev);
dev->driver = NULL;
@@ -701,7 +708,6 @@ static void __device_release_driver(struct device *dev)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
BUS_NOTIFY_UNBOUND_DRIVER,
dev);
-
}
}
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 60ee5591ee8f..c39b8617280f 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -473,6 +473,7 @@ static int pm_clk_notify(struct notifier_block *nb,
enable_clock(dev, NULL);
}
break;
+ case BUS_NOTIFY_DRIVER_NOT_BOUND:
case BUS_NOTIFY_UNBOUND_DRIVER:
if (clknb->con_ids[0]) {
for (con_id = clknb->con_ids; *con_id; con_id++)
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 7067b6ddc1db..8b20930ade98 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -622,12 +622,17 @@ static void dw_dma_tasklet(unsigned long data)
static irqreturn_t dw_dma_interrupt(int irq, void *dev_id)
{
struct dw_dma *dw = dev_id;
- u32 status = dma_readl(dw, STATUS_INT);
+ u32 status;
+ /* Check if we have any interrupt from the DMAC which is not in use */
+ if (!dw->in_use)
+ return IRQ_NONE;
+
+ status = dma_readl(dw, STATUS_INT);
dev_vdbg(dw->dma.dev, "%s: status=0x%x\n", __func__, status);
/* Check if we have any interrupt from the DMAC */
- if (!status || !dw->in_use)
+ if (!status)
return IRQ_NONE;
/*
diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index 68a4815750b5..127093a0c0e8 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -155,7 +155,6 @@ static int dw_probe(struct platform_device *pdev)
struct dw_dma_chip *chip;
struct device *dev = &pdev->dev;
struct resource *mem;
- const struct acpi_device_id *id;
struct dw_dma_platform_data *pdata;
int err;
@@ -179,11 +178,6 @@ static int dw_probe(struct platform_device *pdev)
pdata = dev_get_platdata(dev);
if (!pdata)
pdata = dw_dma_parse_dt(pdev);
- if (!pdata && has_acpi_companion(dev)) {
- id = acpi_match_device(dev->driver->acpi_match_table, dev);
- if (id)
- pdata = (struct dw_dma_platform_data *)id->driver_data;
- }
chip->dev = dev;
@@ -239,7 +233,19 @@ static void dw_shutdown(struct platform_device *pdev)
{
struct dw_dma_chip *chip = platform_get_drvdata(pdev);
+ /*
+ * We have to call dw_dma_disable() to stop any ongoing transfer. On
+ * some platforms we can't do that since DMA device is powered off.
+ * Moreover we have no possibility to check if the platform is affected
+ * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put()
+ * unconditionally. On the other hand we can't use
+ * pm_runtime_suspended() because runtime PM framework is not fully
+ * used by the driver.
+ */
+ pm_runtime_get_sync(chip->dev);
dw_dma_disable(chip);
+ pm_runtime_put_sync_suspend(chip->dev);
+
clk_disable_unprepare(chip->clk);
}
@@ -252,17 +258,8 @@ MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
#endif
#ifdef CONFIG_ACPI
-static struct dw_dma_platform_data dw_dma_acpi_pdata = {
- .nr_channels = 8,
- .is_private = true,
- .chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
- .chan_priority = CHAN_PRIORITY_ASCENDING,
- .block_size = 4095,
- .nr_masters = 2,
-};
-
static const struct acpi_device_id dw_dma_acpi_id_table[] = {
- { "INTL9C60", (kernel_ulong_t)&dw_dma_acpi_pdata },
+ { "INTL9C60", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table);
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 7d7ae97476e2..e38c2bbba940 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -34,8 +34,7 @@ static int get_sem(struct device *dev, u32 *sem)
u32 data;
int ret;
- ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, PUNIT_SEMAPHORE,
- &data);
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data);
if (ret) {
dev_err(dev, "iosf failed to read punit semaphore\n");
return ret;
@@ -50,21 +49,19 @@ static void reset_semaphore(struct device *dev)
{
u32 data;
- if (iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
- PUNIT_SEMAPHORE, &data)) {
+ if (iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data)) {
dev_err(dev, "iosf failed to reset punit semaphore during read\n");
return;
}
data &= ~PUNIT_SEMAPHORE_BIT;
- if (iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
- PUNIT_SEMAPHORE, data))
+ if (iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, data))
dev_err(dev, "iosf failed to reset punit semaphore during write\n");
}
static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
{
- u32 sem;
+ u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
int ret;
unsigned long start, end;
@@ -77,8 +74,7 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
return 0;
/* host driver writes to side band semaphore register */
- ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
- PUNIT_SEMAPHORE, PUNIT_SEMAPHORE_ACQUIRE);
+ ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, sem);
if (ret) {
dev_err(dev->dev, "iosf punit semaphore request failed\n");
return ret;
@@ -102,8 +98,7 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
dev_err(dev->dev, "punit semaphore timed out, resetting\n");
reset_semaphore(dev->dev);
- ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
- PUNIT_SEMAPHORE, &sem);
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &sem);
if (ret)
dev_err(dev->dev, "iosf failed to read punit semaphore\n");
else
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index cbd663deef38..bf72ae740fc1 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -123,6 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "80860F41", 0 },
{ "808622C1", 0 },
{ "AMD0010", ACCESS_INTR_MASK },
+ { "APMC0D0F", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c
index 48747c28a43d..4099159ffa3d 100644
--- a/drivers/powercap/intel_rapl.c
+++ b/drivers/powercap/intel_rapl.c
@@ -988,16 +988,16 @@ static void set_floor_freq_atom(struct rapl_domain *rd, bool enable)
}
if (!power_ctrl_orig_val)
- iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_PMC_READ,
- rapl_defaults->floor_freq_reg_addr,
- &power_ctrl_orig_val);
+ iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_CR_READ,
+ rapl_defaults->floor_freq_reg_addr,
+ &power_ctrl_orig_val);
mdata = power_ctrl_orig_val;
if (enable) {
mdata &= ~(0x7f << 8);
mdata |= 1 << 8;
}
- iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_PMC_WRITE,
- rapl_defaults->floor_freq_reg_addr, mdata);
+ iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_CR_WRITE,
+ rapl_defaults->floor_freq_reg_addr, mdata);
}
static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
diff --git a/drivers/thermal/intel_quark_dts_thermal.c b/drivers/thermal/intel_quark_dts_thermal.c
index 5ed90e6c8a64..5d33b350da1c 100644
--- a/drivers/thermal/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel_quark_dts_thermal.c
@@ -125,8 +125,8 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
struct soc_sensor_entry *aux_entry = tzd->devdata;
int ret;
- ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_ENABLE, &out);
+ ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_ENABLE, &out);
if (ret)
return ret;
@@ -137,8 +137,8 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
if (!aux_entry->locked) {
out |= QRK_DTS_ENABLE_BIT;
- ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
- QRK_DTS_REG_OFFSET_ENABLE, out);
+ ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+ QRK_DTS_REG_OFFSET_ENABLE, out);
if (ret)
return ret;
@@ -158,8 +158,8 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
struct soc_sensor_entry *aux_entry = tzd->devdata;
int ret;
- ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_ENABLE, &out);
+ ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_ENABLE, &out);
if (ret)
return ret;
@@ -170,8 +170,8 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
if (!aux_entry->locked) {
out &= ~QRK_DTS_ENABLE_BIT;
- ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
- QRK_DTS_REG_OFFSET_ENABLE, out);
+ ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+ QRK_DTS_REG_OFFSET_ENABLE, out);
if (ret)
return ret;
@@ -192,8 +192,8 @@ static int _get_trip_temp(int trip, int *temp)
u32 out;
mutex_lock(&dts_update_mutex);
- status = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_PTPS, &out);
+ status = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_PTPS, &out);
mutex_unlock(&dts_update_mutex);
if (status)
@@ -236,8 +236,8 @@ static int update_trip_temp(struct soc_sensor_entry *aux_entry,
goto failed;
}
- ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_PTPS, &store_ptps);
+ ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_PTPS, &store_ptps);
if (ret)
goto failed;
@@ -262,8 +262,8 @@ static int update_trip_temp(struct soc_sensor_entry *aux_entry,
out |= (temp_out & QRK_DTS_MASK_TP_THRES) <<
(trip * QRK_DTS_SHIFT_TP);
- ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
- QRK_DTS_REG_OFFSET_PTPS, out);
+ ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+ QRK_DTS_REG_OFFSET_PTPS, out);
failed:
mutex_unlock(&dts_update_mutex);
@@ -294,8 +294,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
int ret;
mutex_lock(&dts_update_mutex);
- ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_TEMP, &out);
+ ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_TEMP, &out);
mutex_unlock(&dts_update_mutex);
if (ret)
@@ -350,13 +350,13 @@ static void free_soc_dts(struct soc_sensor_entry *aux_entry)
if (aux_entry) {
if (!aux_entry->locked) {
mutex_lock(&dts_update_mutex);
- iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
- QRK_DTS_REG_OFFSET_ENABLE,
- aux_entry->store_dts_enable);
+ iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+ QRK_DTS_REG_OFFSET_ENABLE,
+ aux_entry->store_dts_enable);
- iosf_mbi_write(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_WRITE,
- QRK_DTS_REG_OFFSET_PTPS,
- aux_entry->store_ptps);
+ iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
+ QRK_DTS_REG_OFFSET_PTPS,
+ aux_entry->store_ptps);
mutex_unlock(&dts_update_mutex);
}
thermal_zone_device_unregister(aux_entry->tzone);
@@ -378,9 +378,8 @@ static struct soc_sensor_entry *alloc_soc_dts(void)
}
/* Check if DTS register is locked */
- err = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_LOCK,
- &out);
+ err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_LOCK, &out);
if (err)
goto err_ret;
@@ -395,16 +394,16 @@ static struct soc_sensor_entry *alloc_soc_dts(void)
/* Store DTS default state if DTS registers are not locked */
if (!aux_entry->locked) {
/* Store DTS default enable for restore on exit */
- err = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_ENABLE,
- &aux_entry->store_dts_enable);
+ err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_ENABLE,
+ &aux_entry->store_dts_enable);
if (err)
goto err_ret;
/* Store DTS default PTPS register for restore on exit */
- err = iosf_mbi_read(QRK_MBI_UNIT_RMU, QRK_MBI_RMU_READ,
- QRK_DTS_REG_OFFSET_PTPS,
- &aux_entry->store_ptps);
+ err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
+ QRK_DTS_REG_OFFSET_PTPS,
+ &aux_entry->store_ptps);
if (err)
goto err_ret;
}
diff --git a/drivers/thermal/intel_soc_dts_iosf.c b/drivers/thermal/intel_soc_dts_iosf.c
index 5841d1d72996..f72e1db3216f 100644
--- a/drivers/thermal/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel_soc_dts_iosf.c
@@ -90,7 +90,7 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd, int trip,
dts = tzd->devdata;
sensors = dts->sensors;
mutex_lock(&sensors->dts_update_lock);
- status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_PTPS, &out);
mutex_unlock(&sensors->dts_update_lock);
if (status)
@@ -124,27 +124,27 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
temp_out = (sensors->tj_max - temp) / 1000;
- status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_PTPS, &store_ptps);
if (status)
return status;
out = (store_ptps & ~(0xFF << (thres_index * 8)));
out |= (temp_out & 0xFF) << (thres_index * 8);
- status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTPS, out);
if (status)
return status;
pr_debug("update_trip_temp PTPS = %x\n", out);
- status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_PTMC, &out);
if (status)
goto err_restore_ptps;
store_ptmc = out;
- status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_TE_AUX0 + thres_index,
&te_out);
if (status)
@@ -167,12 +167,12 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
out &= ~SOC_DTS_AUX0_ENABLE_BIT;
te_out &= ~int_enable_bit;
}
- status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTMC, out);
if (status)
goto err_restore_te_out;
- status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_TE_AUX0 + thres_index,
te_out);
if (status)
@@ -182,13 +182,13 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
return 0;
err_restore_te_out:
- iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTMC, store_te_out);
err_restore_ptmc:
- iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTMC, store_ptmc);
err_restore_ptps:
- iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTPS, store_ptps);
/* Nothing we can do if restore fails */
@@ -235,7 +235,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
dts = tzd->devdata;
sensors = dts->sensors;
- status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_TEMP, &out);
if (status)
return status;
@@ -259,14 +259,14 @@ static int soc_dts_enable(int id)
u32 out;
int ret;
- ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_ENABLE, &out);
if (ret)
return ret;
if (!(out & BIT(id))) {
out |= BIT(id);
- ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_ENABLE, out);
if (ret)
return ret;
@@ -278,7 +278,7 @@ static int soc_dts_enable(int id)
static void remove_dts_thermal_zone(struct intel_soc_dts_sensor_entry *dts)
{
if (dts) {
- iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_ENABLE, dts->store_status);
thermal_zone_device_unregister(dts->tzone);
}
@@ -296,9 +296,8 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
int i;
/* Store status to restor on exit */
- ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
- SOC_DTS_OFFSET_ENABLE,
- &dts->store_status);
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+ SOC_DTS_OFFSET_ENABLE, &dts->store_status);
if (ret)
goto err_ret;
@@ -311,7 +310,7 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
}
/* Check if the writable trip we provide is not used by BIOS */
- ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_PTPS, &store_ptps);
if (ret)
trip_mask = 0;
@@ -374,19 +373,19 @@ void intel_soc_dts_iosf_interrupt_handler(struct intel_soc_dts_sensors *sensors)
spin_lock_irqsave(&sensors->intr_notify_lock, flags);
- status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_PTMC, &ptmc_out);
ptmc_out |= SOC_DTS_PTMC_APIC_DEASSERT_BIT;
- status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTMC, ptmc_out);
- status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+ status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
SOC_DTS_OFFSET_PTTSS, &sticky_out);
pr_debug("status %d PTTSS %x\n", status, sticky_out);
if (sticky_out & SOC_DTS_TRIP_MASK) {
int i;
/* reset sticky bit */
- status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+ status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTTSS, sticky_out);
spin_unlock_irqrestore(&sensors->intr_notify_lock, flags);