Merge tag 'omap-cleanup-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren <tony@atomide.com>

Here is some more omap clean-up. The biggest changes are
hwmod, clock, and System Control Module cleanup, and the removal
of the last instance of omap_read/write usage for omap2+ with
the removal of unused USB OHCI Full Speed driver support. The
removed OHCI is only currently used for omap1 as the actively
used omap2+ boards have either MUSB or another instance of
OHCI+EHCI that's more usable.

* tag 'omap-cleanup-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: hwmod: remove prm_clkdm, cm_clkdm; allow hwmods to have no clockdomain
  ARM: OMAP3: Move McBSP fck clock alias to hwmod data
  ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2430
  ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2420
  ARM: OMAP: dsp: interface to control module functions
  ARM: OMAP2+: control: new APIs to configure boot address and mode
  ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data
  ARM: OMAP2+: hwmod: use init-time function pointer for _init_clkdm
  ARM: OMAP2+: hwmod: use init-time function pointer for hardreset
  ARM: OMAP2+: hwmod: use init-time function pointer for wait_target_ready
  ARM: OMAP4: hwmod: drop extra cpu_is check from _wait_target_disable()
  ARM: OMAP2+: hwmod: use init-time function ptrs for enable/disable module
  ARM: OMAP4: hwmod: rename _enable_module to _omap4_enable_module()
  ARM: OMAP: Make FS USB omap1 only
  ARM: OMAP2: Remove legacy USB FS support
  ARM: OMAP3: There is no FS USB controller on omap3
  ARM: OMAP: dma: Clear status registers on enable/disable irq

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 9 insertions, 7 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bddc8fd9a7be..271ca161d7ef 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -185,7 +185,7 @@ config USB_FUSB300
 
 config USB_OMAP
 	tristate "OMAP USB Device Controller"
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP1
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
 	select USB_OTG_UTILS if ARCH_OMAP
 	help
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index a460e8c204f4..89cbd2b22ab0 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,8 @@
 #include <asm/mach-types.h>
 
 #include <plat/dma.h>
-#include <plat/usb.h>
+
+#include <mach/usb.h>
 
 #include "omap_udc.h"
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 83e58df29fe3..dcfaaa91a3fb 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -308,7 +308,7 @@ config USB_OHCI_HCD
 
 config USB_OHCI_HCD_OMAP1
 	bool "OHCI support for OMAP1/2 chips"
-	depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
+	depends on USB_OHCI_HCD && ARCH_OMAP1
 	default y
 	---help---
 	  Enables support for the OHCI controller on OMAP1/2 chips.
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 9ce35d0d9d5d..b02c344e2cc9 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -20,14 +20,15 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
 #include <plat/mux.h>
-#include <mach/irqs.h>
 #include <plat/fpga.h>
-#include <plat/usb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/usb.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 70cf5d7bca48..e0558dfcfafc 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -36,9 +36,9 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/usb.h>
 #include <plat/mux.h>
 
+#include <mach/usb.h>
 
 #ifndef	DEBUG
 #undef	VERBOSE