net/usb: new driver for RTL8152

Add new driver for supporting Realtek RTL8152 Based USB 2.0 Ethernet Adapters

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 1789 insertions, 0 deletions

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 7c769d8e25ad..287cc624b90b 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -93,6 +93,17 @@ config USB_RTL8150
 	  To compile this driver as a module, choose M here: the
 	  module will be called rtl8150.
 
+config USB_RTL8152
+	tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
+	select NET_CORE
+	select MII
+	help
+	  This option adds support for Realtek RTL8152 based USB 2.0
+	  10/100 Ethernet adapters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called r8152.
+
 config USB_USBNET
 	tristate "Multi-purpose USB Networking Framework"
 	select NET_CORE
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index 119b06c9aa16..9ab5c9d4b45a 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_USB_CATC)		+= catc.o
 obj-$(CONFIG_USB_KAWETH)	+= kaweth.o
 obj-$(CONFIG_USB_PEGASUS)	+= pegasus.o
 obj-$(CONFIG_USB_RTL8150)	+= rtl8150.o
+obj-$(CONFIG_USB_RTL8152)	+= r8152.o
 obj-$(CONFIG_USB_HSO)		+= hso.o
 obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
 asix-y := asix_devices.o asix_common.o ax88172a.o
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 4ff71d619cd8..24fbec27a22a 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -479,6 +479,7 @@ static const struct driver_info wwan_info = {
 #define NOVATEL_VENDOR_ID	0x1410
 #define ZTE_VENDOR_ID		0x19D2
 #define DELL_VENDOR_ID		0x413C
+#define REALTEK_VENDOR_ID	0x0bda
 
 static const struct usb_device_id	products [] = {
 /*
@@ -619,6 +620,15 @@ static const struct usb_device_id	products [] = {
 	.driver_info = 0,
 },
 
+/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
+#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)
+{
+	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+#endif
+
 /*
  * WHITELIST!!!
  *
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
new file mode 100644
index 000000000000..14e519888631
--- /dev/null
+++ b/drivers/net/usb/r8152.c
@@ -0,0 +1,1767 @@
+/*
+ *  Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/uaccess.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v1.0.0 (2013/05/03)"
+#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
+#define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
+#define MODULENAME "r8152"
+
+#define R8152_PHY_ID		32
+
+#define PLA_IDR			0xc000
+#define PLA_RCR			0xc010
+#define PLA_RMS			0xc016
+#define PLA_RXFIFO_CTRL0	0xc0a0
+#define PLA_RXFIFO_CTRL1	0xc0a4
+#define PLA_RXFIFO_CTRL2	0xc0a8
+#define PLA_FMC			0xc0b4
+#define PLA_CFG_WOL		0xc0b6
+#define PLA_MAR			0xcd00
+#define PAL_BDC_CR		0xd1a0
+#define PLA_LEDSEL		0xdd90
+#define PLA_LED_FEATURE		0xdd92
+#define PLA_PHYAR		0xde00
+#define PLA_GPHY_INTR_IMR	0xe022
+#define PLA_EEE_CR		0xe040
+#define PLA_EEEP_CR		0xe080
+#define PLA_MAC_PWR_CTRL	0xe0c0
+#define PLA_TCR0		0xe610
+#define PLA_TCR1		0xe612
+#define PLA_TXFIFO_CTRL		0xe618
+#define PLA_RSTTELLY		0xe800
+#define PLA_CR			0xe813
+#define PLA_CRWECR		0xe81c
+#define PLA_CONFIG5		0xe822
+#define PLA_PHY_PWR		0xe84c
+#define PLA_OOB_CTRL		0xe84f
+#define PLA_CPCR		0xe854
+#define PLA_MISC_0		0xe858
+#define PLA_MISC_1		0xe85a
+#define PLA_OCP_GPHY_BASE	0xe86c
+#define PLA_TELLYCNT		0xe890
+#define PLA_SFF_STS_7		0xe8de
+#define PLA_PHYSTATUS		0xe908
+#define PLA_BP_BA		0xfc26
+#define PLA_BP_0		0xfc28
+#define PLA_BP_1		0xfc2a
+#define PLA_BP_2		0xfc2c
+#define PLA_BP_3		0xfc2e
+#define PLA_BP_4		0xfc30
+#define PLA_BP_5		0xfc32
+#define PLA_BP_6		0xfc34
+#define PLA_BP_7		0xfc36
+
+#define USB_DEV_STAT		0xb808
+#define USB_USB_CTRL		0xd406
+#define USB_PHY_CTRL		0xd408
+#define USB_TX_AGG		0xd40a
+#define USB_RX_BUF_TH		0xd40c
+#define USB_USB_TIMER		0xd428
+#define USB_PM_CTRL_STATUS	0xd432
+#define USB_TX_DMA		0xd434
+#define USB_UPS_CTRL		0xd800
+#define USB_BP_BA		0xfc26
+#define USB_BP_0		0xfc28
+#define USB_BP_1		0xfc2a
+#define USB_BP_2		0xfc2c
+#define USB_BP_3		0xfc2e
+#define USB_BP_4		0xfc30
+#define USB_BP_5		0xfc32
+#define USB_BP_6		0xfc34
+#define USB_BP_7		0xfc36
+
+/* OCP Registers */
+#define OCP_ALDPS_CONFIG	0x2010
+#define OCP_EEE_CONFIG1		0x2080
+#define OCP_EEE_CONFIG2		0x2092
+#define OCP_EEE_CONFIG3		0x2094
+#define OCP_EEE_AR		0xa41a
+#define OCP_EEE_DATA		0xa41c
+
+/* PLA_RCR */
+#define RCR_AAP			0x00000001
+#define RCR_APM			0x00000002
+#define RCR_AM			0x00000004
+#define RCR_AB			0x00000008
+#define RCR_ACPT_ALL		(RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
+
+/* PLA_RXFIFO_CTRL0 */
+#define RXFIFO_THR1_NORMAL	0x00080002
+#define RXFIFO_THR1_OOB		0x01800003
+
+/* PLA_RXFIFO_CTRL1 */
+#define RXFIFO_THR2_FULL	0x00000060
+#define RXFIFO_THR2_HIGH	0x00000038
+#define RXFIFO_THR2_OOB		0x0000004a
+
+/* PLA_RXFIFO_CTRL2 */
+#define RXFIFO_THR3_FULL	0x00000078
+#define RXFIFO_THR3_HIGH	0x00000048
+#define RXFIFO_THR3_OOB		0x0000005a
+
+/* PLA_TXFIFO_CTRL */
+#define TXFIFO_THR_NORMAL	0x00400008
+
+/* PLA_FMC */
+#define FMC_FCR_MCU_EN		0x0001
+
+/* PLA_EEEP_CR */
+#define EEEP_CR_EEEP_TX		0x0002
+
+/* PLA_TCR0 */
+#define TCR0_TX_EMPTY		0x0800
+#define TCR0_AUTO_FIFO		0x0080
+
+/* PLA_TCR1 */
+#define VERSION_MASK		0x7cf0
+
+/* PLA_CR */
+#define CR_RST			0x10
+#define CR_RE			0x08
+#define CR_TE			0x04
+
+/* PLA_CRWECR */
+#define CRWECR_NORAML		0x00
+#define CRWECR_CONFIG		0xc0
+
+/* PLA_OOB_CTRL */
+#define NOW_IS_OOB		0x80
+#define TXFIFO_EMPTY		0x20
+#define RXFIFO_EMPTY		0x10
+#define LINK_LIST_READY		0x02
+#define DIS_MCU_CLROOB		0x01
+#define FIFO_EMPTY		(TXFIFO_EMPTY | RXFIFO_EMPTY)
+
+/* PLA_MISC_1 */
+#define RXDY_GATED_EN		0x0008
+
+/* PLA_SFF_STS_7 */
+#define RE_INIT_LL		0x8000
+#define MCU_BORW_EN		0x4000
+
+/* PLA_CPCR */
+#define CPCR_RX_VLAN		0x0040
+
+/* PLA_CFG_WOL */
+#define MAGIC_EN		0x0001
+
+/* PAL_BDC_CR */
+#define ALDPS_PROXY_MODE	0x0001
+
+/* PLA_CONFIG5 */
+#define LAN_WAKE_EN		0x0002
+
+/* PLA_LED_FEATURE */
+#define LED_MODE_MASK		0x0700
+
+/* PLA_PHY_PWR */
+#define TX_10M_IDLE_EN		0x0080
+#define PFM_PWM_SWITCH		0x0040
+
+/* PLA_MAC_PWR_CTRL */
+#define D3_CLK_GATED_EN		0x00004000
+#define MCU_CLK_RATIO		0x07010f07
+#define MCU_CLK_RATIO_MASK	0x0f0f0f0f
+
+/* PLA_GPHY_INTR_IMR */
+#define GPHY_STS_MSK		0x0001
+#define SPEED_DOWN_MSK		0x0002
+#define SPDWN_RXDV_MSK		0x0004
+#define SPDWN_LINKCHG_MSK	0x0008
+
+/* PLA_PHYAR */
+#define PHYAR_FLAG		0x80000000
+
+/* PLA_EEE_CR */
+#define EEE_RX_EN		0x0001
+#define EEE_TX_EN		0x0002
+
+/* USB_DEV_STAT */
+#define STAT_SPEED_MASK		0x0006
+#define STAT_SPEED_HIGH		0x0000
+#define STAT_SPEED_FULL		0x0001
+
+/* USB_TX_AGG */
+#define TX_AGG_MAX_THRESHOLD	0x03
+
+/* USB_RX_BUF_TH */
+#define RX_BUF_THR		0x7a120180
+
+/* USB_TX_DMA */
+#define TEST_MODE_DISABLE	0x00000001
+#define TX_SIZE_ADJUST1		0x00000100
+
+/* USB_UPS_CTRL */
+#define POWER_CUT		0x0100
+
+/* USB_PM_CTRL_STATUS */
+#define RWSUME_INDICATE		0x0001
+
+/* USB_USB_CTRL */
+#define RX_AGG_DISABLE		0x0010
+
+/* OCP_ALDPS_CONFIG */
+#define ENPWRSAVE		0x8000
+#define ENPDNPS			0x0200
+#define LINKENA			0x0100
+#define DIS_SDSAVE		0x0010
+
+/* OCP_EEE_CONFIG1 */
+#define RG_TXLPI_MSK_HFDUP	0x8000
+#define RG_MATCLR_EN		0x4000
+#define EEE_10_CAP		0x2000
+#define EEE_NWAY_EN		0x1000
+#define TX_QUIET_EN		0x0200
+#define RX_QUIET_EN		0x0100
+#define SDRISETIME		0x0010	/* bit 4 ~ 6 */
+#define RG_RXLPI_MSK_HFDUP	0x0008
+#define SDFALLTIME		0x0007	/* bit 0 ~ 2 */
+
+/* OCP_EEE_CONFIG2 */
+#define RG_LPIHYS_NUM		0x7000	/* bit 12 ~ 15 */
+#define RG_DACQUIET_EN		0x0400
+#define RG_LDVQUIET_EN		0x0200
+#define RG_CKRSEL		0x0020
+#define RG_EEEPRG_EN		0x0010
+
+/* OCP_EEE_CONFIG3 */
+#define FST_SNR_EYE_R		0x1500	/* bit 7 ~ 15 */
+#define RG_LFS_SEL		0x0060	/* bit 6 ~ 5 */
+#define MSK_PH			0x0006	/* bit 0 ~ 3 */
+
+/* OCP_EEE_AR */
+/* bit[15:14] function */
+#define FUN_ADDR		0x0000
+#define FUN_DATA		0x4000
+/* bit[4:0] device addr */
+#define DEVICE_ADDR		0x0007
+
+/* OCP_EEE_DATA */
+#define EEE_ADDR		0x003C
+#define EEE_DATA		0x0002
+
+enum rtl_register_content {
+	_100bps		= 0x08,
+	_10bps		= 0x04,
+	LINK_STATUS	= 0x02,
+	FULL_DUP	= 0x01,
+};
+
+#define RTL8152_REQT_READ	0xc0
+#define RTL8152_REQT_WRITE	0x40
+#define RTL8152_REQ_GET_REGS	0x05
+#define RTL8152_REQ_SET_REGS	0x05
+
+#define BYTE_EN_DWORD		0xff
+#define BYTE_EN_WORD		0x33
+#define BYTE_EN_BYTE		0x11
+#define BYTE_EN_SIX_BYTES	0x3f
+#define BYTE_EN_START_MASK	0x0f
+#define BYTE_EN_END_MASK	0xf0
+
+#define RTL8152_RMS		(VLAN_ETH_FRAME_LEN + VLAN_HLEN)
+#define RTL8152_TX_TIMEOUT	(HZ)
+
+/* rtl8152 flags */
+enum rtl8152_flags {
+	RTL8152_UNPLUG = 0,
+	RX_URB_FAIL,
+	RTL8152_SET_RX_MODE,
+	WORK_ENABLE
+};
+
+/* Define these values to match your device */
+#define VENDOR_ID_REALTEK		0x0bda
+#define PRODUCT_ID_RTL8152		0x8152
+
+#define MCU_TYPE_PLA			0x0100
+#define MCU_TYPE_USB			0x0000
+
+struct rx_desc {
+	u32 opts1;
+#define RX_LEN_MASK			0x7fff
+	u32 opts2;
+	u32 opts3;
+	u32 opts4;
+	u32 opts5;
+	u32 opts6;
+};
+
+struct tx_desc {
+	u32 opts1;
+#define TX_FS			(1 << 31) /* First segment of a packet */
+#define TX_LS			(1 << 30) /* Final segment of a packet */
+#define TX_LEN_MASK		0xffff
+	u32 opts2;
+};
+
+struct r8152 {
+	unsigned long flags;
+	struct usb_device *udev;
+	struct tasklet_struct tl;
+	struct net_device *netdev;
+	struct urb *rx_urb, *tx_urb;
+	struct sk_buff *tx_skb, *rx_skb;
+	struct delayed_work schedule;
+	struct mii_if_info mii;
+	u32 msg_enable;
+	u16 ocp_base;
+	u8 version;
+	u8 speed;
+};
+
+enum rtl_version {
+	RTL_VER_UNKNOWN = 0,
+	RTL_VER_01,
+	RTL_VER_02
+};
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The RTL chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static const int multicast_filter_limit = 32;
+
+static
+int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	return usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
+			       RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
+			       value, index, data, size, 500);
+}
+
+static
+int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	return usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0),
+			       RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
+			       value, index, data, size, 500);
+}
+
+static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
+				void *data, u16 type)
+{
+	u16	limit = 64;
+	int	ret = 0;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	while (size) {
+		if (size > limit) {
+			ret = get_registers(tp, index, type, limit, data);
+			if (ret < 0)
+				break;
+
+			index += limit;
+			data += limit;
+			size -= limit;
+		} else {
+			ret = get_registers(tp, index, type, size, data);
+			if (ret < 0)
+				break;
+
+			index += size;
+			data += size;
+			size = 0;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
+				u16 size, void *data, u16 type)
+{
+	int	ret;
+	u16	byteen_start, byteen_end, byen;
+	u16	limit = 512;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	byteen_start = byteen & BYTE_EN_START_MASK;
+	byteen_end = byteen & BYTE_EN_END_MASK;
+
+	byen = byteen_start | (byteen_start << 4);
+	ret = set_registers(tp, index, type | byen, 4, data);
+	if (ret < 0)
+		goto error1;
+
+	index += 4;
+	data += 4;
+	size -= 4;
+
+	if (size) {
+		size -= 4;
+
+		while (size) {
+			if (size > limit) {
+				ret = set_registers(tp, index,
+					type | BYTE_EN_DWORD,
+					limit, data);
+				if (ret < 0)
+					goto error1;
+
+				index += limit;
+				data += limit;
+				size -= limit;
+			} else {
+				ret = set_registers(tp, index,
+					type | BYTE_EN_DWORD,
+					size, data);
+				if (ret < 0)
+					goto error1;
+
+				index += size;
+				data += size;
+				size = 0;
+				break;
+			}
+		}
+
+		byen = byteen_end | (byteen_end >> 4);
+		ret = set_registers(tp, index, type | byen, 4, data);
+		if (ret < 0)
+			goto error1;
+	}
+
+error1:
+	return ret;
+}
+
+static inline
+int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
+{
+	return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
+{
+	return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB);
+}
+
+static inline
+int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
+}
+
+static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(data), &data);
+	else
+		usb_ocp_read(tp, index, sizeof(data), &data);
+
+	return __le32_to_cpu(data);
+}
+
+static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data);
+	else
+		usb_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data);
+}
+
+static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	u8 shift = index & 2;
+
+	index &= ~3;
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(data), &data);
+	else
+		usb_ocp_read(tp, index, sizeof(data), &data);
+
+	data = __le32_to_cpu(data);
+	data >>= (shift * 8);
+	data &= 0xffff;
+
+	return (u16)data;
+}
+
+static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 tmp, mask = 0xffff;
+	u16 byen = BYTE_EN_WORD;
+	u8 shift = index & 2;
+
+	data &= mask;
+
+	if (index & 2) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(tmp), &tmp);
+	else
+		usb_ocp_read(tp, index, sizeof(tmp), &tmp);
+
+	tmp = __le32_to_cpu(tmp) & ~mask;
+	tmp |= data;
+	tmp = __cpu_to_le32(tmp);
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+	else
+		usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+}
+
+static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	u8 shift = index & 3;
+
+	index &= ~3;
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(data), &data);
+	else
+		usb_ocp_read(tp, index, sizeof(data), &data);
+
+	data = __le32_to_cpu(data);
+	data >>= (shift * 8);
+	data &= 0xff;
+
+	return (u8)data;
+}
+
+static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 tmp, mask = 0xff;
+	u16 byen = BYTE_EN_BYTE;
+	u8 shift = index & 3;
+
+	data &= mask;
+
+	if (index & 3) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_read(tp, index, sizeof(tmp), &tmp);
+	else
+		usb_ocp_read(tp, index, sizeof(tmp), &tmp);
+
+	tmp = __le32_to_cpu(tmp) & ~mask;
+	tmp |= data;
+	tmp = __cpu_to_le32(tmp);
+
+	if (type == MCU_TYPE_PLA)
+		pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+	else
+		usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp);
+}
+
+static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = PHYAR_FLAG | ((reg_addr & 0x1f) << 16) |
+		   (value & 0xffff);
+
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data);
+
+	for (i = 20; i > 0; i--) {
+		udelay(25);
+		ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR);
+		if (!(ocp_data & PHYAR_FLAG))
+			break;
+	}
+	udelay(20);
+}
+
+static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = (reg_addr & 0x1f) << 16;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data);
+
+	for (i = 20; i > 0; i--) {
+		udelay(25);
+		ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR);
+		if (ocp_data & PHYAR_FLAG)
+			break;
+	}
+	udelay(20);
+
+	if (!(ocp_data & PHYAR_FLAG))
+		return -EAGAIN;
+
+	return (u16)(ocp_data & 0xffff);
+}
+
+static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (phy_id != R8152_PHY_ID)
+		return -EINVAL;
+
+	return r8152_mdio_read(tp, reg);
+}
+
+static
+void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (phy_id != R8152_PHY_ID)
+		return;
+
+	r8152_mdio_write(tp, reg, val);
+}
+
+static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
+{
+	u16 ocp_base, ocp_index;
+
+	ocp_base = addr & 0xf000;
+	if (ocp_base != tp->ocp_base) {
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		tp->ocp_base = ocp_base;
+	}
+
+	ocp_index = (addr & 0x0fff) | 0xb000;
+	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
+}
+
+static inline void set_ethernet_addr(struct r8152 *tp)
+{
+	struct net_device *dev = tp->netdev;
+	u8 *node_id;
+
+	node_id = kmalloc(sizeof(u8) * 8, GFP_KERNEL);
+	if (!node_id) {
+		netif_err(tp, probe, dev, "out of memory");
+		return;
+	}
+
+	if (pla_ocp_read(tp, PLA_IDR, sizeof(u8) * 8, node_id) < 0)
+		netif_notice(tp, probe, dev, "inet addr fail\n");
+	else {
+		memcpy(dev->dev_addr, node_id, dev->addr_len);
+		memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+	}
+	kfree(node_id);
+}
+
+static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+	return 0;
+}
+
+static int alloc_all_urbs(struct r8152 *tp)
+{
+	tp->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tp->rx_urb)
+		return 0;
+	tp->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tp->tx_urb) {
+		usb_free_urb(tp->rx_urb);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void free_all_urbs(struct r8152 *tp)
+{
+	usb_free_urb(tp->rx_urb);
+	usb_free_urb(tp->tx_urb);
+}
+
+static struct net_device_stats *rtl8152_get_stats(struct net_device *dev)
+{
+	return &dev->stats;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	struct r8152 *tp;
+	unsigned pkt_len;
+	struct sk_buff *skb;
+	struct net_device *netdev;
+	struct net_device_stats *stats;
+	int status = urb->status;
+	int result;
+	struct rx_desc *rx_desc;
+
+	tp = urb->context;
+	if (!tp)
+		return;
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+	netdev = tp->netdev;
+	if (!netif_device_present(netdev))
+		return;
+
+	stats = rtl8152_get_stats(netdev);
+	switch (status) {
+	case 0:
+		break;
+	case -ESHUTDOWN:
+		set_bit(RTL8152_UNPLUG, &tp->flags);
+		netif_device_detach(tp->netdev);
+	case -ENOENT:
+		return;	/* the urb is in unlink state */
+	case -ETIME:
+		pr_warn_ratelimited("may be reset is needed?..\n");
+		goto goon;
+	default:
+		pr_warn_ratelimited("Rx status %d\n", status);
+		goto goon;
+	}
+
+	/* protect against short packets (tell me why we got some?!?) */
+	if (urb->actual_length < sizeof(*rx_desc))
+		goto goon;
+
+
+	rx_desc = (struct rx_desc *)urb->transfer_buffer;
+	pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
+	if (urb->actual_length < sizeof(struct rx_desc) + pkt_len)
+		goto goon;
+
+	skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
+	if (!skb)
+		goto goon;
+
+	memcpy(skb->data, tp->rx_skb->data + sizeof(struct rx_desc), pkt_len);
+	skb_put(skb, pkt_len);
+	skb->protocol = eth_type_trans(skb, netdev);
+	netif_rx(skb);
+	stats->rx_packets++;
+	stats->rx_bytes += pkt_len;
+goon:
+	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
+		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc),
+		      (usb_complete_t)read_bulk_callback, tp);
+	result = usb_submit_urb(tp->rx_urb, GFP_ATOMIC);
+	if (result == -ENODEV) {
+		netif_device_detach(tp->netdev);
+	} else if (result) {
+		set_bit(RX_URB_FAIL, &tp->flags);
+		goto resched;
+	} else {
+		clear_bit(RX_URB_FAIL, &tp->flags);
+	}
+
+	return;
+resched:
+	tasklet_schedule(&tp->tl);
+}
+
+static void rx_fixup(unsigned long data)
+{
+	struct r8152 *tp;
+	int status;
+
+	tp = (struct r8152 *)data;
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	status = usb_submit_urb(tp->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV) {
+		netif_device_detach(tp->netdev);
+	} else if (status) {
+		set_bit(RX_URB_FAIL, &tp->flags);
+		goto tlsched;
+	} else {
+		clear_bit(RX_URB_FAIL, &tp->flags);
+	}
+
+	return;
+tlsched:
+	tasklet_schedule(&tp->tl);
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	struct r8152 *tp;
+	int status = urb->status;
+
+	tp = urb->context;
+	if (!tp)
+		return;
+	dev_kfree_skb_irq(tp->tx_skb);
+	if (!netif_device_present(tp->netdev))
+		return;
+	if (status)
+		dev_info(&urb->dev->dev, "%s: Tx status %d\n",
+			 tp->netdev->name, status);
+	tp->netdev->trans_start = jiffies;
+	netif_wake_queue(tp->netdev);
+}
+
+static void rtl8152_tx_timeout(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct net_device_stats *stats = rtl8152_get_stats(netdev);
+	netif_warn(tp, tx_err, netdev, "Tx timeout.\n");
+	usb_unlink_urb(tp->tx_urb);
+	stats->tx_errors++;
+}
+
+static void rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (tp->speed & LINK_STATUS)
+		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+}
+
+static void _rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	u32 tmp, *mc_filter;	/* Multicast hash filter */
+	u32 ocp_data;
+
+	mc_filter = kmalloc(sizeof(u32) * 2, GFP_KERNEL);
+	if (!mc_filter) {
+		netif_err(tp, link, netdev, "out of memory");
+		return;
+	}
+
+	clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
+	netif_stop_queue(netdev);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_data |= RCR_AB | RCR_APM;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* Unconditionally log net taps. */
+		netif_notice(tp, link, netdev, "Promiscuous mode enabled\n");
+		ocp_data |= RCR_AM | RCR_AAP;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((netdev_mc_count(netdev) > multicast_filter_limit) ||
+		   (netdev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		ocp_data |= RCR_AM;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct netdev_hw_addr *ha;
+
+		mc_filter[1] = mc_filter[0] = 0;
+		netdev_for_each_mc_addr(ha, netdev) {
+			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			ocp_data |= RCR_AM;
+		}
+	}
+
+	tmp = mc_filter[0];
+	mc_filter[0] = __cpu_to_le32(swab32(mc_filter[1]));
+	mc_filter[1] = __cpu_to_le32(swab32(tmp));
+
+	pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(u32) * 2, mc_filter);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	netif_wake_queue(netdev);
+	kfree(mc_filter);
+}
+
+static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
+					    struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct net_device_stats *stats = rtl8152_get_stats(netdev);
+	struct tx_desc *tx_desc;
+	int len, res;
+
+	netif_stop_queue(netdev);
+	len = skb->len;
+	if (skb_header_cloned(skb) || skb_headroom(skb) < sizeof(*tx_desc)) {
+		struct sk_buff *tx_skb;
+
+		tx_skb = skb_copy_expand(skb, sizeof(*tx_desc), 0, GFP_ATOMIC);
+		dev_kfree_skb_any(skb);
+		if (!tx_skb) {
+			stats->tx_dropped++;
+			netif_wake_queue(netdev);
+			return NETDEV_TX_OK;
+		}
+		skb = tx_skb;
+	}
+	tx_desc = (struct tx_desc *)skb_push(skb, sizeof(*tx_desc));
+	memset(tx_desc, 0, sizeof(*tx_desc));
+	tx_desc->opts1 = cpu_to_le32((len & TX_LEN_MASK) | TX_FS | TX_LS);
+	tp->tx_skb = skb;
+	skb_tx_timestamp(skb);
+	usb_fill_bulk_urb(tp->tx_urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
+			  skb->data, skb->len,
+			  (usb_complete_t)write_bulk_callback, tp);
+	res = usb_submit_urb(tp->tx_urb, GFP_ATOMIC);
+	if (res) {
+		/* Can we get/handle EPIPE here? */
+		if (res == -ENODEV) {
+			netif_device_detach(tp->netdev);
+		} else {
+			netif_warn(tp, tx_err, netdev,
+				   "failed tx_urb %d\n", res);
+			stats->tx_errors++;
+			netif_start_queue(netdev);
+		}
+	} else {
+		stats->tx_packets++;
+		stats->tx_bytes += skb->len;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void r8152b_reset_packet_filter(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
+	ocp_data &= ~FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+	ocp_data |= FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+}
+
+static void rtl8152_nic_reset(struct r8152 *tp)
+{
+	int	i;
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
+
+	for (i = 0; i < 1000; i++) {
+		if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
+			break;
+		udelay(100);
+	}
+}
+
+static inline u8 rtl8152_get_speed(struct r8152 *tp)
+{
+	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
+}
+
+static int rtl8152_enable(struct r8152 *tp)
+{
+	u32	ocp_data;
+	u8 speed;
+
+	speed = rtl8152_get_speed(tp);
+	if (speed & _100bps) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data &= ~EEEP_CR_EEEP_TX;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+	} else {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+		ocp_data |= EEEP_CR_EEEP_TX;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+	}
+
+	r8152b_reset_packet_filter(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
+	ocp_data |= CR_RE | CR_TE;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
+		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc),
+		      (usb_complete_t)read_bulk_callback, tp);
+
+	return usb_submit_urb(tp->rx_urb, GFP_KERNEL);
+}
+
+static void rtl8152_disable(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	usb_kill_urb(tp->tx_urb);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data |= RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
+			break;
+		mdelay(1);
+	}
+
+	for (i = 0; i < 1000; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
+			break;
+		mdelay(1);
+	}
+
+	usb_kill_urb(tp->rx_urb);
+
+	rtl8152_nic_reset(tp);
+}
+
+static void r8152b_exit_oob(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data |= RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	rtl8152_nic_reset(tp);
+
+	/* rx share fifo credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT);
+	ocp_data &= STAT_SPEED_MASK;
+	if (ocp_data == STAT_SPEED_FULL) {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_FULL);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_FULL);
+	} else {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_HIGH);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_HIGH);
+	}
+
+	/* TX share fifo free credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
+
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_BUF_THR);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
+			TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data &= ~CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data |= TCR0_AUTO_FIFO;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+}
+
+static void r8152b_enter_oob(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
+
+	rtl8152_disable(tp);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	for (i = 0; i < 1000; i++) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		mdelay(1);
+	}
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data |= MAGIC_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data |= CPCR_RX_VLAN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
+	ocp_data |= ALDPS_PROXY_MODE;
+	ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+}
+
+static void r8152b_disable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
+	msleep(20);
+}
+
+static inline void r8152b_enable_aldps(struct r8152 *tp)
+{
+	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
+					    LINKENA | DIS_SDSAVE);
+}
+
+static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
+{
+	u16 bmcr, anar;
+	int ret = 0;
+
+	cancel_delayed_work_sync(&tp->schedule);
+	anar = r8152_mdio_read(tp, MII_ADVERTISE);
+	anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
+		  ADVERTISE_100HALF | ADVERTISE_100FULL);
+
+	if (autoneg == AUTONEG_DISABLE) {
+		if (speed == SPEED_10) {
+			bmcr = 0;
+			anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+		} else if (speed == SPEED_100) {
+			bmcr = BMCR_SPEED100;
+			anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (duplex == DUPLEX_FULL)
+			bmcr |= BMCR_FULLDPLX;
+	} else {
+		if (speed == SPEED_10) {
+			if (duplex == DUPLEX_FULL)
+				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+			else
+				anar |= ADVERTISE_10HALF;
+		} else if (speed == SPEED_100) {
+			if (duplex == DUPLEX_FULL) {
+				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+				anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+			} else {
+				anar |= ADVERTISE_10HALF;
+				anar |= ADVERTISE_100HALF;
+			}
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+	}
+
+	r8152_mdio_write(tp, MII_ADVERTISE, anar);
+	r8152_mdio_write(tp, MII_BMCR, bmcr);
+
+out:
+	schedule_delayed_work(&tp->schedule, 5 * HZ);
+
+	return ret;
+}
+
+static void rtl8152_down(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	r8152b_disable_aldps(tp);
+	r8152b_enter_oob(tp);
+	r8152b_enable_aldps(tp);
+}
+
+static void set_carrier(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	u8 speed;
+
+	speed = rtl8152_get_speed(tp);
+
+	if (speed & LINK_STATUS) {
+		if (!(tp->speed & LINK_STATUS)) {
+			rtl8152_enable(tp);
+			set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+			netif_carrier_on(netdev);
+		}
+	} else {
+		if (tp->speed & LINK_STATUS) {
+			netif_carrier_off(netdev);
+			rtl8152_disable(tp);
+		}
+	}
+	tp->speed = speed;
+}
+
+static void rtl_work_func_t(struct work_struct *work)
+{
+	struct r8152 *tp = container_of(work, struct r8152, schedule.work);
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		goto out1;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		goto out1;
+
+	set_carrier(tp);
+
+	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
+		_rtl8152_set_rx_mode(tp->netdev);
+
+	schedule_delayed_work(&tp->schedule, HZ);
+
+out1:
+	return;
+}
+
+static int rtl8152_open(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+	tp->speed = rtl8152_get_speed(tp);
+	if (tp->speed & LINK_STATUS) {
+		res = rtl8152_enable(tp);
+		if (res) {
+			if (res == -ENODEV)
+				netif_device_detach(tp->netdev);
+
+			netif_err(tp, ifup, netdev,
+				  "rtl8152_open failed: %d\n", res);
+			return res;
+		}
+
+		netif_carrier_on(netdev);
+	} else {
+		netif_stop_queue(netdev);
+		netif_carrier_off(netdev);
+	}
+
+	rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+	netif_start_queue(netdev);
+	set_bit(WORK_ENABLE, &tp->flags);
+	schedule_delayed_work(&tp->schedule, 0);
+
+	return res;
+}
+
+static int rtl8152_close(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+	clear_bit(WORK_ENABLE, &tp->flags);
+	cancel_delayed_work_sync(&tp->schedule);
+	netif_stop_queue(netdev);
+	rtl8152_disable(tp);
+
+	return res;
+}
+
+static void rtl_clear_bp(struct r8152 *tp)
+{
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
+	mdelay(3);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
+}
+
+static void r8152b_enable_eee(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data |= EEE_RX_EN | EEE_TX_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN |
+					   EEE_10_CAP | EEE_NWAY_EN |
+					   TX_QUIET_EN | RX_QUIET_EN |
+					   SDRISETIME | RG_RXLPI_MSK_HFDUP |
+					   SDFALLTIME);
+	ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN |
+					   RG_LDVQUIET_EN | RG_CKRSEL |
+					   RG_EEEPRG_EN);
+	ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR);
+	ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA);
+	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+}
+
+static void r8152b_enable_fc(struct r8152 *tp)
+{
+	u16 anar;
+
+	anar = r8152_mdio_read(tp, MII_ADVERTISE);
+	anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+	r8152_mdio_write(tp, MII_ADVERTISE, anar);
+}
+
+static void r8152b_hw_phy_cfg(struct r8152 *tp)
+{
+	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+	r8152b_disable_aldps(tp);
+}
+
+static void r8152b_init(struct r8152 *tp)
+{
+	u32	ocp_data;
+	int	i;
+
+	rtl_clear_bp(tp);
+
+	if (tp->version == RTL_VER_01) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+		ocp_data &= ~LED_MODE_MASK;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+	}
+
+	r8152b_hw_phy_cfg(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RWSUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+
+	r8152b_exit_oob(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
+	ocp_data &= ~MCU_CLK_RATIO_MASK;
+	ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
+	ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
+		   SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
+
+	r8152b_enable_eee(tp);
+	r8152b_enable_aldps(tp);
+	r8152b_enable_fc(tp);
+
+	r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
+				       BMCR_ANRESTART);
+	for (i = 0; i < 100; i++) {
+		udelay(100);
+		if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET))
+			break;
+	}
+
+	/* disable rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data |= RX_AGG_DISABLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+}
+
+static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	netif_device_detach(tp->netdev);
+
+	if (netif_running(tp->netdev)) {
+		clear_bit(WORK_ENABLE, &tp->flags);
+		cancel_delayed_work_sync(&tp->schedule);
+	}
+
+	rtl8152_down(tp);
+
+	return 0;
+}
+
+static int rtl8152_resume(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	r8152b_init(tp);
+	netif_device_attach(tp->netdev);
+	if (netif_running(tp->netdev)) {
+		rtl8152_enable(tp);
+		set_bit(WORK_ENABLE, &tp->flags);
+		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 0);
+	}
+
+	return 0;
+}
+
+static void rtl8152_get_drvinfo(struct net_device *netdev,
+				struct ethtool_drvinfo *info)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	strncpy(info->driver, MODULENAME, ETHTOOL_BUSINFO_LEN);
+	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
+	usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
+}
+
+static
+int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (!tp->mii.mdio_read)
+		return -EOPNOTSUPP;
+
+	return mii_ethtool_gset(&tp->mii, cmd);
+}
+
+static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+}
+
+static struct ethtool_ops ops = {
+	.get_drvinfo = rtl8152_get_drvinfo,
+	.get_settings = rtl8152_get_settings,
+	.set_settings = rtl8152_set_settings,
+	.get_link = ethtool_op_get_link,
+};
+
+static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(rq);
+	int res = 0;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = R8152_PHY_ID; /* Internal PHY */
+		break;
+
+	case SIOCGMIIREG:
+		data->val_out = r8152_mdio_read(tp, data->reg_num);
+		break;
+
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN)) {
+			res = -EPERM;
+			break;
+		}
+		r8152_mdio_write(tp, data->reg_num, data->val_in);
+		break;
+
+	default:
+		res = -EOPNOTSUPP;
+	}
+
+	return res;
+}
+
+static const struct net_device_ops rtl8152_netdev_ops = {
+	.ndo_open		= rtl8152_open,
+	.ndo_stop		= rtl8152_close,
+	.ndo_do_ioctl		= rtl8152_ioctl,
+	.ndo_start_xmit		= rtl8152_start_xmit,
+	.ndo_tx_timeout		= rtl8152_tx_timeout,
+	.ndo_set_rx_mode	= rtl8152_set_rx_mode,
+	.ndo_set_mac_address	= rtl8152_set_mac_address,
+
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static void r8152b_get_version(struct r8152 *tp)
+{
+	u32	ocp_data;
+	u16	version;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
+	version = (u16)(ocp_data & VERSION_MASK);
+
+	switch (version) {
+	case 0x4c00:
+		tp->version = RTL_VER_01;
+		break;
+	case 0x4c10:
+		tp->version = RTL_VER_02;
+		break;
+	default:
+		netif_info(tp, probe, tp->netdev,
+			   "Unknown version 0x%04x\n", version);
+		break;
+	}
+}
+
+static int rtl8152_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct r8152 *tp;
+	struct net_device *netdev;
+
+	if (udev->actconfig->desc.bConfigurationValue != 1) {
+		usb_driver_set_configuration(udev, 1);
+		return -ENODEV;
+	}
+
+	netdev = alloc_etherdev(sizeof(struct r8152));
+	if (!netdev) {
+		dev_err(&intf->dev, "Out of memory");
+		return -ENOMEM;
+	}
+
+	tp = netdev_priv(netdev);
+	tp->msg_enable = 0x7FFF;
+
+	tasklet_init(&tp->tl, rx_fixup, (unsigned long)tp);
+	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
+
+	tp->udev = udev;
+	tp->netdev = netdev;
+	netdev->netdev_ops = &rtl8152_netdev_ops;
+	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
+	netdev->features &= ~NETIF_F_IP_CSUM;
+	SET_ETHTOOL_OPS(netdev, &ops);
+	tp->speed = 0;
+
+	tp->mii.dev = netdev;
+	tp->mii.mdio_read = read_mii_word;
+	tp->mii.mdio_write = write_mii_word;
+	tp->mii.phy_id_mask = 0x3f;
+	tp->mii.reg_num_mask = 0x1f;
+	tp->mii.phy_id = R8152_PHY_ID;
+	tp->mii.supports_gmii = 0;
+
+	r8152b_get_version(tp);
+	r8152b_init(tp);
+	set_ethernet_addr(tp);
+
+	if (!alloc_all_urbs(tp)) {
+		netif_err(tp, probe, netdev, "out of memory");
+		goto out;
+	}
+
+	tp->rx_skb = netdev_alloc_skb(netdev,
+			RTL8152_RMS + sizeof(struct rx_desc));
+	if (!tp->rx_skb)
+		goto out1;
+
+	usb_set_intfdata(intf, tp);
+	SET_NETDEV_DEV(netdev, &intf->dev);
+
+
+	if (register_netdev(netdev) != 0) {
+		netif_err(tp, probe, netdev, "couldn't register the device");
+		goto out2;
+	}
+
+	netif_info(tp, probe, netdev, "%s", DRIVER_VERSION);
+
+	return 0;
+
+out2:
+	usb_set_intfdata(intf, NULL);
+	dev_kfree_skb(tp->rx_skb);
+out1:
+	free_all_urbs(tp);
+out:
+	free_netdev(netdev);
+	return -EIO;
+}
+
+static void rtl8152_unload(struct r8152 *tp)
+{
+	u32	ocp_data;
+
+	if (tp->version != RTL_VER_01) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+		ocp_data |= POWER_CUT;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RWSUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+}
+
+static void rtl8152_disconnect(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (tp) {
+		set_bit(RTL8152_UNPLUG, &tp->flags);
+		tasklet_kill(&tp->tl);
+		unregister_netdev(tp->netdev);
+		rtl8152_unload(tp);
+		free_all_urbs(tp);
+		if (tp->rx_skb)
+			dev_kfree_skb(tp->rx_skb);
+		free_netdev(tp->netdev);
+	}
+}
+
+/* table of devices that work with this driver */
+static struct usb_device_id rtl8152_table[] = {
+	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8152_table);
+
+static struct usb_driver rtl8152_driver = {
+	.name =		MODULENAME,
+	.probe =	rtl8152_probe,
+	.disconnect =	rtl8152_disconnect,
+	.id_table =	rtl8152_table,
+	.suspend =	rtl8152_suspend,
+	.resume =	rtl8152_resume
+};
+
+static int __init usb_rtl8152_init(void)
+{
+	return usb_register(&rtl8152_driver);
+}
+
+static void __exit usb_rtl8152_exit(void)
+{
+	usb_deregister(&rtl8152_driver);
+}
+
+module_init(usb_rtl8152_init);
+module_exit(usb_rtl8152_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");