diff options
author | Jan Andersson <jan@gaisler.com> | 2011-05-06 12:00:15 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-05-06 18:24:00 -0700 |
commit | c31a65f869f7b8a7039007411c76d7b6f9a63323 (patch) | |
tree | a22bc058d1b343e8ac0734c905465030166dc821 /drivers/usb | |
parent | e4d235d800c8d75750a46331298e3473c10651b2 (diff) |
USB: UHCI: Move PCI specific functions to uhci-pci.c
This patch is part of a series that extend the UHCI HCD to support
non-PCI controllers.
This patch moves PCI specific functions to uhci-pci.c and includes
this file in uhci-hcd.c. It also renames the function uhci_init to
uhci_pci_init.
uhci_init/uhci_pci_init is modified so that the port-detection logic
is kept in a new separate function uhci_count_ports() in uhci-hcd.c.
Signed-off-by: Jan Andersson <jan@gaisler.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/host/uhci-hcd.c | 326 | ||||
-rw-r--r-- | drivers/usb/host/uhci-pci.c | 301 |
2 files changed, 333 insertions, 294 deletions
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 348174fdfaee..3d2a10563be8 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -48,7 +48,6 @@ #include <asm/system.h> #include "uhci-hcd.h" -#include "pci-quirks.h" /* * Version Information @@ -143,15 +142,6 @@ static void finish_reset(struct uhci_hcd *uhci) } /* - * Make sure the controller is completely inactive, unable to - * generate interrupts or do DMA. - */ -static void uhci_pci_reset_hc(struct uhci_hcd *uhci) -{ - uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr); -} - -/* * Last rites for a defunct/nonfunctional controller * or one we don't want to use any more. */ @@ -167,18 +157,6 @@ static void uhci_hc_died(struct uhci_hcd *uhci) } /* - * Initialize a controller that was newly discovered or has just been - * resumed. In either case we can't be sure of its previous state. - * - * Returns: 1 if the controller was reset, 0 otherwise. - */ -static int uhci_pci_check_and_reset_hc(struct uhci_hcd *uhci) -{ - return uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), - uhci->io_addr); -} - -/* * Initialize a controller that was newly discovered or has lost power * or otherwise been reset while it was suspended. In none of these cases * can we be sure of its previous state. @@ -189,18 +167,6 @@ static void check_and_reset_hc(struct uhci_hcd *uhci) finish_reset(uhci); } -static void uhci_pci_configure_hc(struct uhci_hcd *uhci) -{ - struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); - - /* Enable PIRQ */ - pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT); - - /* Disable platform-specific non-PME# wakeup */ - if (pdev->vendor == PCI_VENDOR_ID_INTEL) - pci_write_config_byte(pdev, USBRES_INTEL, 0); -} - /* * Store the basic register settings needed by the controller. */ @@ -221,38 +187,6 @@ static void configure_hc(struct uhci_hcd *uhci) uhci->configure_hc(uhci); } -static int uhci_pci_resume_detect_interrupts_are_broken(struct uhci_hcd *uhci) -{ - int port; - - switch (to_pci_dev(uhci_dev(uhci))->vendor) { - default: - break; - - case PCI_VENDOR_ID_GENESYS: - /* Genesys Logic's GL880S controllers don't generate - * resume-detect interrupts. - */ - return 1; - - case PCI_VENDOR_ID_INTEL: - /* Some of Intel's USB controllers have a bug that causes - * resume-detect interrupts if any port has an over-current - * condition. To make matters worse, some motherboards - * hardwire unused USB ports' over-current inputs active! - * To prevent problems, we will not enable resume-detect - * interrupts if any ports are OC. - */ - for (port = 0; port < uhci->rh_numports; ++port) { - if (inw(uhci->io_addr + USBPORTSC1 + port * 2) & - USBPORTSC_OC) - return 1; - } - break; - } - return 0; -} - static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci) { /* If we have to ignore overcurrent events then almost by definition @@ -264,28 +198,6 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci) uhci->resume_detect_interrupts_are_broken(uhci) : 0; } -static int uhci_pci_global_suspend_mode_is_broken(struct uhci_hcd *uhci) -{ - int port; - const char *sys_info; - static const char bad_Asus_board[] = "A7V8X"; - - /* One of Asus's motherboards has a bug which causes it to - * wake up immediately from suspend-to-RAM if any of the ports - * are connected. In such cases we will not set EGSM. - */ - sys_info = dmi_get_system_info(DMI_BOARD_NAME); - if (sys_info && !strcmp(sys_info, bad_Asus_board)) { - for (port = 0; port < uhci->rh_numports; ++port) { - if (inw(uhci->io_addr + USBPORTSC1 + port * 2) & - USBPORTSC_CCS) - return 1; - } - } - - return 0; -} - static int global_suspend_mode_is_broken(struct uhci_hcd *uhci) { return uhci->global_suspend_mode_is_broken ? @@ -551,82 +463,6 @@ static void release_uhci(struct uhci_hcd *uhci) uhci->frame, uhci->frame_dma_handle); } -static int uhci_init(struct usb_hcd *hcd) -{ - struct uhci_hcd *uhci = hcd_to_uhci(hcd); - unsigned io_size = (unsigned) hcd->rsrc_len; - int port; - - uhci->io_addr = (unsigned long) hcd->rsrc_start; - - /* The UHCI spec says devices must have 2 ports, and goes on to say - * they may have more but gives no way to determine how many there - * are. However according to the UHCI spec, Bit 7 of the port - * status and control register is always set to 1. So we try to - * use this to our advantage. Another common failure mode when - * a nonexistent register is addressed is to return all ones, so - * we test for that also. - */ - for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) { - unsigned int portstatus; - - portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2)); - if (!(portstatus & 0x0080) || portstatus == 0xffff) - break; - } - if (debug) - dev_info(uhci_dev(uhci), "detected %d ports\n", port); - - /* Anything greater than 7 is weird so we'll ignore it. */ - if (port > UHCI_RH_MAXCHILD) { - dev_info(uhci_dev(uhci), "port count misdetected? " - "forcing to 2 ports\n"); - port = 2; - } - uhci->rh_numports = port; - - /* Intel controllers report the OverCurrent bit active on. - * VIA controllers report it active off, so we'll adjust the - * bit value. (It's not standardized in the UHCI spec.) - */ - if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA) - uhci->oc_low = 1; - - /* HP's server management chip requires a longer port reset delay. */ - if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP) - uhci->wait_for_hp = 1; - - /* Set up pointers to PCI-specific functions */ - uhci->reset_hc = uhci_pci_reset_hc; - uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc; - uhci->configure_hc = uhci_pci_configure_hc; - uhci->resume_detect_interrupts_are_broken = - uhci_pci_resume_detect_interrupts_are_broken; - uhci->global_suspend_mode_is_broken = - uhci_pci_global_suspend_mode_is_broken; - - - /* Kick BIOS off this hardware and reset if the controller - * isn't already safely quiescent. - */ - check_and_reset_hc(uhci); - return 0; -} - -/* Make sure the controller is quiescent and that we're not using it - * any more. This is mainly for the benefit of programs which, like kexec, - * expect the hardware to be idle: not doing DMA or generating IRQs. - * - * This routine may be called in a damaged or failing kernel. Hence we - * do not acquire the spinlock before shutting down the controller. - */ -static void uhci_shutdown(struct pci_dev *pdev) -{ - struct usb_hcd *hcd = pci_get_drvdata(pdev); - - uhci_hc_died(hcd_to_uhci(hcd)); -} - /* * Allocate a frame list, and then setup the skeleton * @@ -843,87 +679,6 @@ static int uhci_rh_resume(struct usb_hcd *hcd) return rc; } -static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) -{ - struct uhci_hcd *uhci = hcd_to_uhci(hcd); - struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); - int rc = 0; - - dev_dbg(uhci_dev(uhci), "%s\n", __func__); - - spin_lock_irq(&uhci->lock); - if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) - goto done_okay; /* Already suspended or dead */ - - if (uhci->rh_state > UHCI_RH_SUSPENDED) { - dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); - rc = -EBUSY; - goto done; - }; - - /* All PCI host controllers are required to disable IRQ generation - * at the source, so we must turn off PIRQ. - */ - pci_write_config_word(pdev, USBLEGSUP, 0); - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - - /* Enable platform-specific non-PME# wakeup */ - if (do_wakeup) { - if (pdev->vendor == PCI_VENDOR_ID_INTEL) - pci_write_config_byte(pdev, USBRES_INTEL, - USBPORT1EN | USBPORT2EN); - } - -done_okay: - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -done: - spin_unlock_irq(&uhci->lock); - return rc; -} - -static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) -{ - struct uhci_hcd *uhci = hcd_to_uhci(hcd); - - dev_dbg(uhci_dev(uhci), "%s\n", __func__); - - /* Since we aren't in D3 any more, it's safe to set this flag - * even if the controller was dead. - */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - spin_lock_irq(&uhci->lock); - - /* Make sure resume from hibernation re-enumerates everything */ - if (hibernated) { - uhci->reset_hc(uhci); - finish_reset(uhci); - } - - /* The firmware may have changed the controller settings during - * a system wakeup. Check it and reconfigure to avoid problems. - */ - else { - check_and_reset_hc(uhci); - } - configure_hc(uhci); - - /* Tell the core if the controller had to be reset */ - if (uhci->rh_state == UHCI_RH_RESET) - usb_root_hub_lost_power(hcd->self.root_hub); - - spin_unlock_irq(&uhci->lock); - - /* If interrupts don't work and remote wakeup is enabled then - * the suspended root hub needs to be polled. - */ - if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) - set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - - /* Does the root hub have a port wakeup pending? */ - usb_hcd_poll_rh_status(hcd); - return 0; -} #endif /* Wait until a particular device/endpoint's QH is idle, and free it */ @@ -966,62 +721,45 @@ static int uhci_hcd_get_frame_number(struct usb_hcd *hcd) return frame_number + delta; } -static const char hcd_name[] = "uhci_hcd"; - -static const struct hc_driver uhci_driver = { - .description = hcd_name, - .product_desc = "UHCI Host Controller", - .hcd_priv_size = sizeof(struct uhci_hcd), - - /* Generic hardware linkage */ - .irq = uhci_irq, - .flags = HCD_USB11, - - /* Basic lifecycle operations */ - .reset = uhci_init, - .start = uhci_start, -#ifdef CONFIG_PM - .pci_suspend = uhci_pci_suspend, - .pci_resume = uhci_pci_resume, - .bus_suspend = uhci_rh_suspend, - .bus_resume = uhci_rh_resume, -#endif - .stop = uhci_stop, - - .urb_enqueue = uhci_urb_enqueue, - .urb_dequeue = uhci_urb_dequeue, +/* Determines number of ports on controller */ +static int uhci_count_ports(struct usb_hcd *hcd) +{ + struct uhci_hcd *uhci = hcd_to_uhci(hcd); + unsigned io_size = (unsigned) hcd->rsrc_len; + int port; - .endpoint_disable = uhci_hcd_endpoint_disable, - .get_frame_number = uhci_hcd_get_frame_number, + /* The UHCI spec says devices must have 2 ports, and goes on to say + * they may have more but gives no way to determine how many there + * are. However according to the UHCI spec, Bit 7 of the port + * status and control register is always set to 1. So we try to + * use this to our advantage. Another common failure mode when + * a nonexistent register is addressed is to return all ones, so + * we test for that also. + */ + for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) { + unsigned int portstatus; - .hub_status_data = uhci_hub_status_data, - .hub_control = uhci_hub_control, -}; + portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2)); + if (!(portstatus & 0x0080) || portstatus == 0xffff) + break; + } + if (debug) + dev_info(uhci_dev(uhci), "detected %d ports\n", port); -static DEFINE_PCI_DEVICE_TABLE(uhci_pci_ids) = { { - /* handle any USB UHCI controller */ - PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0), - .driver_data = (unsigned long) &uhci_driver, - }, { /* end: all zeroes */ } -}; + /* Anything greater than 7 is weird so we'll ignore it. */ + if (port > UHCI_RH_MAXCHILD) { + dev_info(uhci_dev(uhci), "port count misdetected? " + "forcing to 2 ports\n"); + port = 2; + } -MODULE_DEVICE_TABLE(pci, uhci_pci_ids); + return port; +} -static struct pci_driver uhci_pci_driver = { - .name = (char *)hcd_name, - .id_table = uhci_pci_ids, +static const char hcd_name[] = "uhci_hcd"; - .probe = usb_hcd_pci_probe, - .remove = usb_hcd_pci_remove, - .shutdown = uhci_shutdown, +#include "uhci-pci.c" -#ifdef CONFIG_PM_SLEEP - .driver = { - .pm = &usb_hcd_pci_pm_ops - }, -#endif -}; - static int __init uhci_hcd_init(void) { int retval = -ENOMEM; diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c new file mode 100644 index 000000000000..c300bd2f7d1c --- /dev/null +++ b/drivers/usb/host/uhci-pci.c @@ -0,0 +1,301 @@ +/* + * UHCI HCD (Host Controller Driver) PCI Bus Glue. + * + * Extracted from uhci-hcd.c: + * Maintainer: Alan Stern <stern@rowland.harvard.edu> + * + * (C) Copyright 1999 Linus Torvalds + * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com + * (C) Copyright 1999 Randy Dunlap + * (C) Copyright 1999 Georg Acher, acher@in.tum.de + * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de + * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch + * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at + * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface + * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). + * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) + * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu + */ + +#include "pci-quirks.h" + +/* + * Make sure the controller is completely inactive, unable to + * generate interrupts or do DMA. + */ +static void uhci_pci_reset_hc(struct uhci_hcd *uhci) +{ + uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr); +} + +/* + * Initialize a controller that was newly discovered or has just been + * resumed. In either case we can't be sure of its previous state. + * + * Returns: 1 if the controller was reset, 0 otherwise. + */ +static int uhci_pci_check_and_reset_hc(struct uhci_hcd *uhci) +{ + return uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), + uhci->io_addr); +} + +/* + * Store the basic register settings needed by the controller. + * This function is called at the end of configure_hc in uhci-hcd.c. + */ +static void uhci_pci_configure_hc(struct uhci_hcd *uhci) +{ + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); + + /* Enable PIRQ */ + pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT); + + /* Disable platform-specific non-PME# wakeup */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, 0); +} + +static int uhci_pci_resume_detect_interrupts_are_broken(struct uhci_hcd *uhci) +{ + int port; + + switch (to_pci_dev(uhci_dev(uhci))->vendor) { + default: + break; + + case PCI_VENDOR_ID_GENESYS: + /* Genesys Logic's GL880S controllers don't generate + * resume-detect interrupts. + */ + return 1; + + case PCI_VENDOR_ID_INTEL: + /* Some of Intel's USB controllers have a bug that causes + * resume-detect interrupts if any port has an over-current + * condition. To make matters worse, some motherboards + * hardwire unused USB ports' over-current inputs active! + * To prevent problems, we will not enable resume-detect + * interrupts if any ports are OC. + */ + for (port = 0; port < uhci->rh_numports; ++port) { + if (inw(uhci->io_addr + USBPORTSC1 + port * 2) & + USBPORTSC_OC) + return 1; + } + break; + } + return 0; +} + +static int uhci_pci_global_suspend_mode_is_broken(struct uhci_hcd *uhci) +{ + int port; + const char *sys_info; + static const char bad_Asus_board[] = "A7V8X"; + + /* One of Asus's motherboards has a bug which causes it to + * wake up immediately from suspend-to-RAM if any of the ports + * are connected. In such cases we will not set EGSM. + */ + sys_info = dmi_get_system_info(DMI_BOARD_NAME); + if (sys_info && !strcmp(sys_info, bad_Asus_board)) { + for (port = 0; port < uhci->rh_numports; ++port) { + if (inw(uhci->io_addr + USBPORTSC1 + port * 2) & + USBPORTSC_CCS) + return 1; + } + } + + return 0; +} + +static int uhci_pci_init(struct usb_hcd *hcd) +{ + struct uhci_hcd *uhci = hcd_to_uhci(hcd); + + uhci->io_addr = (unsigned long) hcd->rsrc_start; + + uhci->rh_numports = uhci_count_ports(hcd); + + /* Intel controllers report the OverCurrent bit active on. + * VIA controllers report it active off, so we'll adjust the + * bit value. (It's not standardized in the UHCI spec.) + */ + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA) + uhci->oc_low = 1; + + /* HP's server management chip requires a longer port reset delay. */ + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP) + uhci->wait_for_hp = 1; + + /* Set up pointers to PCI-specific functions */ + uhci->reset_hc = uhci_pci_reset_hc; + uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc; + uhci->configure_hc = uhci_pci_configure_hc; + uhci->resume_detect_interrupts_are_broken = + uhci_pci_resume_detect_interrupts_are_broken; + uhci->global_suspend_mode_is_broken = + uhci_pci_global_suspend_mode_is_broken; + + + /* Kick BIOS off this hardware and reset if the controller + * isn't already safely quiescent. + */ + check_and_reset_hc(uhci); + return 0; +} + +/* Make sure the controller is quiescent and that we're not using it + * any more. This is mainly for the benefit of programs which, like kexec, + * expect the hardware to be idle: not doing DMA or generating IRQs. + * + * This routine may be called in a damaged or failing kernel. Hence we + * do not acquire the spinlock before shutting down the controller. + */ +static void uhci_shutdown(struct pci_dev *pdev) +{ + struct usb_hcd *hcd = pci_get_drvdata(pdev); + + uhci_hc_died(hcd_to_uhci(hcd)); +} + +#ifdef CONFIG_PM + +static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) +{ + struct uhci_hcd *uhci = hcd_to_uhci(hcd); + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); + int rc = 0; + + dev_dbg(uhci_dev(uhci), "%s\n", __func__); + + spin_lock_irq(&uhci->lock); + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) + goto done_okay; /* Already suspended or dead */ + + if (uhci->rh_state > UHCI_RH_SUSPENDED) { + dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); + rc = -EBUSY; + goto done; + }; + + /* All PCI host controllers are required to disable IRQ generation + * at the source, so we must turn off PIRQ. + */ + pci_write_config_word(pdev, USBLEGSUP, 0); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Enable platform-specific non-PME# wakeup */ + if (do_wakeup) { + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, + USBPORT1EN | USBPORT2EN); + } + +done_okay: + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); +done: + spin_unlock_irq(&uhci->lock); + return rc; +} + +static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) +{ + struct uhci_hcd *uhci = hcd_to_uhci(hcd); + + dev_dbg(uhci_dev(uhci), "%s\n", __func__); + + /* Since we aren't in D3 any more, it's safe to set this flag + * even if the controller was dead. + */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_lock_irq(&uhci->lock); + + /* Make sure resume from hibernation re-enumerates everything */ + if (hibernated) { + uhci->reset_hc(uhci); + finish_reset(uhci); + } + + /* The firmware may have changed the controller settings during + * a system wakeup. Check it and reconfigure to avoid problems. + */ + else { + check_and_reset_hc(uhci); + } + configure_hc(uhci); + + /* Tell the core if the controller had to be reset */ + if (uhci->rh_state == UHCI_RH_RESET) + usb_root_hub_lost_power(hcd->self.root_hub); + + spin_unlock_irq(&uhci->lock); + + /* If interrupts don't work and remote wakeup is enabled then + * the suspended root hub needs to be polled. + */ + if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Does the root hub have a port wakeup pending? */ + usb_hcd_poll_rh_status(hcd); + return 0; +} + +#endif + +static const struct hc_driver uhci_driver = { + .description = hcd_name, + .product_desc = "UHCI Host Controller", + .hcd_priv_size = sizeof(struct uhci_hcd), + + /* Generic hardware linkage */ + .irq = uhci_irq, + .flags = HCD_USB11, + + /* Basic lifecycle operations */ + .reset = uhci_pci_init, + .start = uhci_start, +#ifdef CONFIG_PM + .pci_suspend = uhci_pci_suspend, + .pci_resume = uhci_pci_resume, + .bus_suspend = uhci_rh_suspend, + .bus_resume = uhci_rh_resume, +#endif + .stop = uhci_stop, + + .urb_enqueue = uhci_urb_enqueue, + .urb_dequeue = uhci_urb_dequeue, + + .endpoint_disable = uhci_hcd_endpoint_disable, + .get_frame_number = uhci_hcd_get_frame_number, + + .hub_status_data = uhci_hub_status_data, + .hub_control = uhci_hub_control, +}; + +static DEFINE_PCI_DEVICE_TABLE(uhci_pci_ids) = { { + /* handle any USB UHCI controller */ + PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0), + .driver_data = (unsigned long) &uhci_driver, + }, { /* end: all zeroes */ } +}; + +MODULE_DEVICE_TABLE(pci, uhci_pci_ids); + +static struct pci_driver uhci_pci_driver = { + .name = (char *)hcd_name, + .id_table = uhci_pci_ids, + + .probe = usb_hcd_pci_probe, + .remove = usb_hcd_pci_remove, + .shutdown = uhci_shutdown, + +#ifdef CONFIG_PM_SLEEP + .driver = { + .pm = &usb_hcd_pci_pm_ops + }, +#endif +}; |