diff options
| author | Wolfram Sang <wsa+renesas@sang-engineering.com> | 2023-03-07 17:30:38 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-03-09 15:30:16 +0100 |
| commit | 87b383f82e4ea8f7fb8e6d6c4d42d0e4a213dd7b (patch) | |
| tree | a714f6aca31dd31126e736a2299d97371da6e778 /drivers/usb/host/xhci-rcar.c | |
| parent | 5d67f4861884762ebc2bddb5d667444e45f25782 (diff) | |
usb: host: xhci-rcar: remove R-Car H3 ES1.* handling
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230307163041.3815-11-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/xhci-rcar.c')
| -rw-r--r-- | drivers/usb/host/xhci-rcar.c | 31 |
1 files changed, 2 insertions, 29 deletions
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 567b096a24e9..c4925f8d6b06 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -12,26 +12,22 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/usb/phy.h> -#include <linux/sys_soc.h> #include "xhci.h" #include "xhci-plat.h" #include "xhci-rzv2m.h" #define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem" -#define XHCI_RCAR_FIRMWARE_NAME_V2 "r8a779x_usb3_v2.dlmem" #define XHCI_RCAR_FIRMWARE_NAME_V3 "r8a779x_usb3_v3.dlmem" /* -* - The V3 firmware is for almost all R-Car Gen3 (except r8a7795 ES1.x) -* - The V2 firmware is for r8a7795 ES1.x. +* - The V3 firmware is for all R-Car Gen3 * - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes * performance degradation. So, this driver continues to use the V1 if R-Car * Gen2. * - The V1 firmware is impossible to use on R-Car Gen3. */ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1); -MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2); MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); /*** Register Offset ***/ @@ -78,17 +74,6 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); #define RCAR_USB3_RX_POL_VAL BIT(21) #define RCAR_USB3_TX_POL_VAL BIT(4) -/* For soc_device_attribute */ -#define RCAR_XHCI_FIRMWARE_V2 BIT(0) /* FIRMWARE V2 */ - -static const struct soc_device_attribute rcar_quirks_match[] = { - { - .soc_id = "r8a7795", .revision = "ES1.*", - .data = (void *)RCAR_XHCI_FIRMWARE_V2, - }, - { /* sentinel */ } -}; - static void xhci_rcar_start_gen2(struct usb_hcd *hcd) { /* LCLK Select */ @@ -134,9 +119,6 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) const struct firmware *fw; int retval, index, j; u32 data, val, temp; - u32 quirks = 0; - const struct soc_device_attribute *attr; - const char *firmware_name; /* * According to the datasheet, "Upon the completion of FW Download, @@ -145,17 +127,8 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS) return 0; - attr = soc_device_match(rcar_quirks_match); - if (attr) - quirks = (uintptr_t)attr->data; - - if (quirks & RCAR_XHCI_FIRMWARE_V2) - firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2; - else - firmware_name = priv->firmware_name; - /* request R-Car USB3.0 firmware */ - retval = request_firmware(&fw, firmware_name, dev); + retval = request_firmware(&fw, priv->firmware_name, dev); if (retval) return retval; |