diff options
author | Venkat Reddy Talla <vreddytalla@nvidia.com> | 2016-11-17 23:24:35 +0530 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2016-11-23 16:27:24 +0000 |
commit | 383d0fca7035a12f1201277d33e8fc87c9d60c9a (patch) | |
tree | bb12c78d91ab8d69ae18fbbf4033277481b277ad /drivers/regulator/max77620-regulator.c | |
parent | 9a40cb0cb8b55ecfdcd3cec1381bcc46ec488588 (diff) |
regulator: max77620: add support to configure MPOK
Adding support to configure regulator POK mapping bit
to control nRST_IO and GPIO1 POK function.
In tegra based platform which uses MAX20024 pmic, when
some of regulators are configured FPS_NONE(flexible power sequencer)
causes PMIC GPIO1 to go low which lead to various other rails turning off,
to avoid this MPOK bit of those regulators need to be set to 0
so that PMIC GPIO1 will not go low.
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator/max77620-regulator.c')
-rw-r--r-- | drivers/regulator/max77620-regulator.c | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index c39a56b41901..d088a7c79e60 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -80,6 +80,7 @@ struct max77620_regulator_pdata { int suspend_fps_pd_slot; int suspend_fps_pu_slot; int current_mode; + int power_ok; int ramp_rate_setting; }; @@ -350,11 +351,48 @@ static int max77620_set_slew_rate(struct max77620_regulator *pmic, int id, return 0; } +static int max77620_config_power_ok(struct max77620_regulator *pmic, int id) +{ + struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id]; + struct max77620_regulator_info *rinfo = pmic->rinfo[id]; + struct max77620_chip *chip = dev_get_drvdata(pmic->dev->parent); + u8 val, mask; + int ret; + + switch (chip->chip_id) { + case MAX20024: + if (rpdata->power_ok >= 0) { + if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) + mask = MAX20024_SD_CFG1_MPOK_MASK; + else + mask = MAX20024_LDO_CFG2_MPOK_MASK; + + val = rpdata->power_ok ? mask : 0; + + ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr, + mask, val); + if (ret < 0) { + dev_err(pmic->dev, "Reg 0x%02x update failed %d\n", + rinfo->cfg_addr, ret); + return ret; + } + } + break; + + default: + break; + } + + return 0; +} + static int max77620_init_pmic(struct max77620_regulator *pmic, int id) { struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id]; int ret; + max77620_config_power_ok(pmic, id); + /* Update power mode */ ret = max77620_regulator_get_power_mode(pmic, id); if (ret < 0) @@ -594,6 +632,12 @@ static int max77620_of_parse_cb(struct device_node *np, np, "maxim,suspend-fps-power-down-slot", &pval); rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1; + ret = of_property_read_u32(np, "maxim,power-ok-control", &pval); + if (!ret) + rpdata->power_ok = pval; + else + rpdata->power_ok = -1; + ret = of_property_read_u32(np, "maxim,ramp-rate-setting", &pval); rpdata->ramp_rate_setting = (!ret) ? pval : 0; @@ -806,6 +850,8 @@ static int max77620_regulator_resume(struct device *dev) for (id = 0; id < MAX77620_NUM_REGS; id++) { reg_pdata = &pmic->reg_pdata[id]; + max77620_config_power_ok(pmic, id); + max77620_regulator_set_fps_slots(pmic, id, false); if (reg_pdata->active_fps_src < 0) continue; |