diff options
| author | Antoine Tenart <antoine.tenart@free-electrons.com> | 2014-05-19 19:36:29 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2014-05-23 00:05:00 +0200 |
| commit | 3de68d331c24e8136da147801c2d090c3038eb32 (patch) | |
| tree | c12a4211b62a6db0dbd8a87b602451317fd40762 /drivers/pinctrl/Makefile | |
| parent | 3ff95885ed7c974ecf308c1d4d27baaa218e32dc (diff) | |
pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs
The Marvell Berlin boards have a group based pinmuxing mechanism. This
adds the core driver support. We actually do not need any information
about the pins here and only have the definition of the groups.
Let's take the example of the uart0 pinmuxing on the BG2Q. Balls BK4 and
BH6 are muxed to respectively UART0 RX and TX if the group GSM12 is set
to mode 0:
Group Modes Offset Base Offset LSB Bit Width
GSM12 3 sm_base 0x40 0x10 0x2
Ball Group Mode 0 Mode 1 Mode 2
BK4 GSM12 UART0_RX IrDA0_RX GPIO9
BH6 GSM12 UART0_TX IrDA0_TX GPIO10
So in order to configure BK4 -> UART0_TX and BH6 -> UART0_RX, we need
to set (sm_base + 0x40 + 0x10) &= ff3fffff.
As pin control registers are part of either chip control or system
control registers, that deal with a bunch of other functions we rely
on a regmap instead of exclusively remapping any resources.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/Makefile')
| -rw-r--r-- | drivers/pinctrl/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index c2621438785e..c06432db970f 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o +obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ obj-$(CONFIG_SUPERH) += sh-pfc/ |