pcmcia: introduce autoconfiguration feature

Introduce an autoconfiguration feature to set certain values in
pcmcia_loop_config(), instead of copying the same code over and over
in each PCMCIA driver. At first, introduce the following options:

CONF_AUTO_CHECK_VCC	check or matching Vcc entry
CONF_AUTO_SET_VPP	set Vpp
CONF_AUTO_AUDIO		enable the speaker line

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

11 files changed, 18 insertions, 109 deletions

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index f361d2865e34..17f1040e255e 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -287,7 +287,6 @@ static int try_io_port(struct pcmcia_device *link)
 static int axnet_configcheck(struct pcmcia_device *p_dev,
 			     cistpl_cftable_entry_t *cfg,
 			     cistpl_cftable_entry_t *dflt,
-			     unsigned int vcc,
 			     void *priv_data)
 {
 	int i;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index f6865adb126d..c1479e3bfab4 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -322,7 +322,6 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
 static int fmvj18x_ioprobe(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cfg,
 			   cistpl_cftable_entry_t *dflt,
-			   unsigned int vcc,
 			   void *priv_data)
 {
 	return 0; /* strange, but that's what the code did already before... */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 4a3b6a43550f..12b028c6abc9 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -503,7 +503,6 @@ static int try_io_port(struct pcmcia_device *link)
 static int pcnet_confcheck(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cfg,
 			   cistpl_cftable_entry_t *dflt,
-			   unsigned int vcc,
 			   void *priv_data)
 {
 	int *priv = priv_data;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 8c16ba672012..e127d2b546dd 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -420,7 +420,6 @@ static int mhz_3288_power(struct pcmcia_device *link)
 static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cf,
 				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
 				void *priv_data)
 {
 	int k;
@@ -590,7 +589,6 @@ static int mot_setup(struct pcmcia_device *link)
 static int smc_configcheck(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cf,
 			   cistpl_cftable_entry_t *dflt,
-			   unsigned int vcc,
 			   void *priv_data)
 {
 	p_dev->resource[0]->start = cf->io.win[0].base;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 7a4a99b73d17..2bc2eb89c4cd 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -668,7 +668,6 @@ static int
 xirc2ps_config_modem(struct pcmcia_device *p_dev,
 		     cistpl_cftable_entry_t *cf,
 		     cistpl_cftable_entry_t *dflt,
-		     unsigned int vcc,
 		     void *priv_data)
 {
 	unsigned int ioaddr;
@@ -688,7 +687,6 @@ static int
 xirc2ps_config_check(struct pcmcia_device *p_dev,
 		     cistpl_cftable_entry_t *cf,
 		     cistpl_cftable_entry_t *dflt,
-		     unsigned int vcc,
 		     void *priv_data)
 {
 	int *pass = priv_data;
@@ -826,7 +824,8 @@ xirc2ps_config(struct pcmcia_device * link)
 	     * the Mako if (on the first pass) the COR bit 5 is set.
 	     */
 	    for (pass=0; pass < 2; pass++)
-		    if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
+		    if (!pcmcia_loop_config(link, xirc2ps_config_check,
+						    &pass))
 			    goto port_found;
 	    /* if special option:
 	     * try to configure as Ethernet only.
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 5939d0c7a5c8..63bf662e9c7f 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -140,25 +140,11 @@ static void airo_detach(struct pcmcia_device *link)
 static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
 				void *priv_data)
 {
 	if (cfg->index == 0)
 		return -ENODEV;
 
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->config_flags |= CONF_ENABLE_SPKR;
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->config_flags |= CONF_ENABLE_IRQ;
-
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
@@ -193,6 +179,9 @@ static int airo_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "airo_config\n");
 
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_AUDIO;
+
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 080266eba985..812decd3fbe9 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -157,25 +157,11 @@ static int card_present(void *arg)
 static int atmel_config_check(struct pcmcia_device *p_dev,
 			      cistpl_cftable_entry_t *cfg,
 			      cistpl_cftable_entry_t *dflt,
-			      unsigned int vcc,
 			      void *priv_data)
 {
 	if (cfg->index == 0)
 		return -ENODEV;
 
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->config_flags |= CONF_ENABLE_SPKR;
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->config_flags |= CONF_ENABLE_IRQ;
-
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
@@ -207,6 +193,9 @@ static int atmel_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "atmel_config\n");
 
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_AUDIO;
+
 	/*
 	  In this loop, we scan the CIS for configuration table entries,
 	  each of which describes a valid card configuration, including
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 5b0b5828b3cf..d4f19af1757f 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -472,7 +472,6 @@ static void prism2_detach(struct pcmcia_device *link)
 static int prism2_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
 			       void *priv_data)
 {
 	if (cfg->index == 0)
@@ -481,28 +480,6 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
 	       "(default 0x%02X)\n", cfg->index, dflt->index);
 
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->config_flags |= CONF_ENABLE_SPKR;
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
-		    10000 && !ignore_cis_vcc) {
-			PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
-			       " this entry\n");
-			return -ENODEV;
-		}
-	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
-		    10000 && !ignore_cis_vcc) {
-			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
-			       "- skipping this entry\n");
-			return -ENODEV;
-		}
-	}
-
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
@@ -553,6 +530,10 @@ static int prism2_config(struct pcmcia_device *link)
 	}
 
 	/* Look for an appropriate configuration table entry in the CIS */
+	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO |
+		CONF_AUTO_CHECK_VCC;
+	if (ignore_cis_vcc)
+		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
 	ret = pcmcia_loop_config(link, prism2_config_check, NULL);
 	if (ret) {
 		if (!ignore_cis_vcc)
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 6020c19b1bdb..031f3e6da3c9 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -797,7 +797,6 @@ static void if_cs_release(struct pcmcia_device *p_dev)
 static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 			 cistpl_cftable_entry_t *cfg,
 			 cistpl_cftable_entry_t *dflt,
-			 unsigned int vcc,
 			 void *priv_data)
 {
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 00316a1a1092..b92173827b55 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -145,39 +145,11 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 				   cistpl_cftable_entry_t *cfg,
 				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
 				   void *priv_data)
 {
 	if (cfg->index == 0)
 		goto next_entry;
 
-	/* Use power settings for Vcc and Vpp if present */
-	/* Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	}
-
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->vpp =
-			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->vpp =
-			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
 	/* Do we need to allocate an interrupt? */
 	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
@@ -230,6 +202,9 @@ orinoco_cs_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
+	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
+	if (ignore_cis_vcc)
+		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
 	ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
 	if (ret) {
 		if (!ignore_cis_vcc)
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index ca2c6c0c5576..f462c78856e9 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -207,32 +207,11 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
 static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 				    cistpl_cftable_entry_t *cfg,
 				    cistpl_cftable_entry_t *dflt,
-				    unsigned int vcc,
 				    void *priv_data)
 {
 	if (cfg->index == 0)
 		goto next_entry;
 
-	/* Use power settings for Vcc and Vpp if present */
-	/* Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
-			      __func__, vcc,
-			      dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
-			if (!ignore_cis_vcc)
-				goto next_entry;
-		}
-	}
-
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->vpp =
 			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
@@ -292,6 +271,9 @@ spectrum_cs_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
+	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
+	if (ignore_cis_vcc)
+		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
 	ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
 	if (ret) {
 		if (!ignore_cis_vcc)