myri_sbus: use request_firmware

Firmware blob looks like this...

        __be16 lanai4_data_size
        unsigned char lanai4_code[]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 30 insertions, 7 deletions

diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 08534c08d30d..9a802adba9a3 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -25,6 +25,7 @@ static char version[] =
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/firmware.h>
 
 #include <net/dst.h>
 #include <net/arp.h>
@@ -43,7 +44,6 @@ static char version[] =
 #include <asm/irq.h>
 
 #include "myri_sbus.h"
-#include "myri_code.h"
 
 /* #define DEBUG_DETECT */
 /* #define DEBUG_IRQ */
@@ -81,6 +81,9 @@ static char version[] =
 #define DHDR(x)
 #endif
 
+/* Firmware name */
+#define FWNAME		"myricom/lanai.bin"
+
 static void myri_reset_off(void __iomem *lp, void __iomem *cregs)
 {
 	/* Clear IRQ mask. */
@@ -171,10 +174,11 @@ static int myri_do_handshake(struct myri_eth *mp)
 
 static int __devinit myri_load_lanai(struct myri_eth *mp)
 {
+	const struct firmware	*fw;
 	struct net_device	*dev = mp->dev;
 	struct myri_shmem __iomem *shmem = mp->shmem;
 	void __iomem		*rptr;
-	int 			i;
+	int 			i, lanai4_data_size;
 
 	myri_disable_irq(mp->lregs, mp->cregs);
 	myri_reset_on(mp->cregs);
@@ -186,13 +190,27 @@ static int __devinit myri_load_lanai(struct myri_eth *mp)
 	if (mp->eeprom.cpuvers >= CPUVERS_3_0)
 		sbus_writel(mp->eeprom.cval, mp->lregs + LANAI_CVAL);
 
+	i = request_firmware(&fw, FWNAME, &mp->myri_op->dev);
+	if (i) {
+		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+		       FWNAME, i);
+		return i;
+	}
+	if (fw->size < 2) {
+		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+		       fw->size, FWNAME);
+		release_firmware(fw);
+		return -EINVAL;
+	}
+	lanai4_data_size = fw->data[0] << 8 | fw->data[1];
+
 	/* Load executable code. */
-	for (i = 0; i < sizeof(lanai4_code); i++)
-		sbus_writeb(lanai4_code[i], rptr + (lanai4_code_off * 2) + i);
+	for (i = 2; i < fw->size; i++)
+		sbus_writeb(fw->data[i], rptr++);
 
 	/* Load data segment. */
-	for (i = 0; i < sizeof(lanai4_data); i++)
-		sbus_writeb(lanai4_data[i], rptr + (lanai4_data_off * 2) + i);
+	for (i = 0; i < lanai4_data_size; i++)
+		sbus_writeb(0, rptr++);
 
 	/* Set device address. */
 	sbus_writeb(0, &shmem->addr[0]);
@@ -228,6 +246,7 @@ static int __devinit myri_load_lanai(struct myri_eth *mp)
 	if (mp->eeprom.cpuvers == CPUVERS_4_0)
 		sbus_writel(0, mp->lregs + LANAI_VERS);
 
+	release_firmware(fw);
 	return i;
 }
 
@@ -1078,7 +1097,10 @@ static int __devinit myri_sbus_probe(struct of_device *op, const struct of_devic
 
 	/* Load code onto the LANai. */
 	DET(("Loading LANAI firmware\n"));
-	myri_load_lanai(mp);
+	if (myri_load_lanai(mp)) {
+		printk(KERN_ERR "MyriCOM: Cannot Load LANAI firmware.\n");
+		goto err_free_irq;
+	}
 
 	if (register_netdev(dev)) {
 		printk("MyriCOM: Cannot register device.\n");
@@ -1159,3 +1181,4 @@ module_init(myri_sbus_init);
 module_exit(myri_sbus_exit);
 
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FWNAME);