diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-28 20:59:45 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-28 20:59:45 -0700 |
commit | b5174fa3a7f4f8f150bfa3b917c92608953dfa0f (patch) | |
tree | 5efd32dd52fe55f760094e78f18acd3ff869751d /drivers/mmc/card | |
parent | afb9bd704c7116076879352a2cc2c43aa12c1e14 (diff) | |
parent | 135111cc5595c6a24dd826d503e2d2bae92da1c4 (diff) |
Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
Core:
* Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
that support Data Tag will provide increased throughput for metadata.
* Faster detection of card removal on I/O errors.
Drivers:
* dw_mmc now supports eMMC Power Off Notify, has PCI support, and
implements pre_req and post_req for asynchronous requests.
* omap_hsmmc now supports device tree.
* esdhc now has power management support.
* sdhci-tegra now supports Tegra30 devices.
* sdhci-spear now supports hibernation.
* tmio_mmc now supports using a GPIO for card detection.
* Intel PCH now supports 8-bit bus transfers.
* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
mmc: sh_mmcif: simplify bitmask macros
mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
mmc: sh_mobile_sdhi: add a callback for board specific init code
mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
mmc: sh_mobile_sdhi: do not manage PM clocks manually
mmc: tmio_mmc: remove unused sdio_irq_enabled flag
mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
mmc: tmio: calculate the native hotplug condition only once
mmc: simplify mmc_cd_gpio_request() by removing two parameters
mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
mmc: sdhci: check interrupt flags in ISR again
mmc: sdhci-pci: Add MSI support
mmc: core: warn when card doesn't support HPI
mmc: davinci: Poll status for small size transfers
mmc: davinci: Eliminate spurious interrupts
mmc: omap_hsmmc: Avoid a regulator voltage change with dt
mmc: omap_hsmmc: Convert hsmmc driver to use device tree
mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
...
Diffstat (limited to 'drivers/mmc/card')
-rw-r--r-- | drivers/mmc/card/block.c | 21 |
1 files changed, 16 insertions, 5 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 4c3b2847e47c..eed213a5c8cb 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1079,6 +1079,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_blk_request *brq = &mqrq->brq; struct request *req = mqrq->req; struct mmc_blk_data *md = mq->data; + bool do_data_tag; /* * Reliable writes are used to implement Forced Unit Access and @@ -1155,6 +1156,16 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, mmc_apply_rel_rw(brq, card, req); /* + * Data tag is used only during writing meta data to speed + * up write and any subsequent read of this meta data + */ + do_data_tag = (card->ext_csd.data_tag_unit_size) && + (req->cmd_flags & REQ_META) && + (rq_data_dir(req) == WRITE) && + ((brq->data.blocks * brq->data.blksz) >= + card->ext_csd.data_tag_unit_size); + + /* * Pre-defined multi-block transfers are preferable to * open ended-ones (and necessary for reliable writes). * However, it is not sufficient to just send CMD23, @@ -1172,13 +1183,13 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, * We'll avoid using CMD23-bounded multiblock writes for * these, while retaining features like reliable writes. */ - - if ((md->flags & MMC_BLK_CMD23) && - mmc_op_multi(brq->cmd.opcode) && - (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) { + if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && + (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || + do_data_tag)) { brq->sbc.opcode = MMC_SET_BLOCK_COUNT; brq->sbc.arg = brq->data.blocks | - (do_rel_wr ? (1 << 31) : 0); + (do_rel_wr ? (1 << 31) : 0) | + (do_data_tag ? (1 << 29) : 0); brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; brq->mrq.sbc = &brq->sbc; } |