Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l core: subdev frame interval now supports which field

 - v4l kapi: moves and renames the init_cfg pad op to init_state as an
   internal op.

 - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900

 - new camera driver: STM32 DCMIPP

 - s5p-mfc has gained MFC v12 support

 - new ISP driver added to staging: Starfive

 - new stateful encoder/decoded: Wave5 codec It is found on the J721S2
   SoC, JH7100 SoC, ssd202d SoC. Etc.

 - fwnode gained support for MIPI "DisCo for Imaging"
   (https://www.mipi.org/specifications/mipi-disco-imaging)

 - as usual, lots of cleanups, fixups and driver improvements.

* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
  media: i2c: thp7312: select CONFIG_FW_LOADER
  media: i2c: mt9m114: use fsleep() in place of udelay()
  media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
  media: i2c: thp7312: Store frame interval in subdev state
  media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
  media: docs: uAPI: Expand error documentation for invalid 'which' value
  media: docs: uAPI: Clarify error documentation for invalid 'which' value
  media: v4l2-subdev: Store frame interval in subdev state
  media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
  media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
  media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
  media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
  media: s5p-mfc: Load firmware for each run in MFCv12.
  media: s5p-mfc: Set context for valid case before calling try_run
  media: s5p-mfc: Add support for DMABUF for encoder
  media: s5p-mfc: Add support for UHD encoding.
  media: s5p-mfc: Add support for rate controls in MFCv12
  media: s5p-mfc: Add YV12 and I420 multiplanar format support
  media: s5p-mfc: Add initial support for MFCv12
  media: s5p-mfc: Rename IS_MFCV10 macro
  ...

1 files changed, 12 insertions, 11 deletions

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index b8f3e5ca03ef..ffe5f25f8647 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -2451,9 +2451,8 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
 		if (rx_data[nport].num_streams > 2)
 			return -EPIPE;
 
-		fmt = v4l2_subdev_state_get_stream_format(state,
-							  route->sink_pad,
-							  route->sink_stream);
+		fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
+						   route->sink_stream);
 		if (!fmt)
 			return -EPIPE;
 
@@ -2842,8 +2841,8 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
 			const struct ub960_format_info *ub960_fmt;
 			struct v4l2_mbus_framefmt *fmt;
 
-			fmt = v4l2_subdev_state_get_stream_format(state, pad,
-								  route->source_stream);
+			fmt = v4l2_subdev_state_get_format(state, pad,
+							   route->source_stream);
 
 			if (!fmt) {
 				ret = -EINVAL;
@@ -2891,8 +2890,7 @@ static int ub960_set_fmt(struct v4l2_subdev *sd,
 	if (!ub960_find_format(format->format.code))
 		format->format.code = ub960_formats[0].code;
 
-	fmt = v4l2_subdev_state_get_stream_format(state, format->pad,
-						  format->stream);
+	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
 	if (!fmt)
 		return -EINVAL;
 
@@ -2908,8 +2906,8 @@ static int ub960_set_fmt(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int ub960_init_cfg(struct v4l2_subdev *sd,
-			  struct v4l2_subdev_state *state)
+static int ub960_init_state(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_state *state)
 {
 	struct ub960_data *priv = sd_to_ub960(sd);
 
@@ -2940,8 +2938,6 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
 
 	.get_fmt = v4l2_subdev_get_fmt,
 	.set_fmt = ub960_set_fmt,
-
-	.init_cfg = ub960_init_cfg,
 };
 
 static int ub960_log_status(struct v4l2_subdev *sd)
@@ -3093,6 +3089,10 @@ static const struct v4l2_subdev_core_ops ub960_subdev_core_ops = {
 	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
 };
 
+static const struct v4l2_subdev_internal_ops ub960_internal_ops = {
+	.init_state = ub960_init_state,
+};
+
 static const struct v4l2_subdev_ops ub960_subdev_ops = {
 	.core = &ub960_subdev_core_ops,
 	.pad = &ub960_pad_ops,
@@ -3652,6 +3652,7 @@ static int ub960_create_subdev(struct ub960_data *priv)
 	int ret;
 
 	v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub960_subdev_ops);
+	priv->sd.internal_ops = &ub960_internal_ops;
 
 	v4l2_ctrl_handler_init(&priv->ctrl_handler, 1);
 	priv->sd.ctrl_handler = &priv->ctrl_handler;