Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-fixes-for-linus

12 files changed, 486 insertions, 219 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9bec8699b8a3..23f0d5e99f35 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -14,6 +14,13 @@ config LEDS_CLASS
 	  This option enables the led sysfs class in /sys/class/leds.  You'll
 	  need this to do anything useful with LEDs.  If unsure, say N.
 
+config LEDS_GPIO_REGISTER
+	bool
+	help
+	  This option provides the function gpio_led_register_device.
+	  As this function is used by arch code it must not be compiled as a
+	  module.
+
 if NEW_LEDS
 
 comment "LED drivers"
@@ -115,13 +122,6 @@ config LEDS_ALIX2
 	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
 	  You have to set leds-alix2.force=1 for boards with Award BIOS.
 
-config LEDS_H1940
-	tristate "LED Support for iPAQ H1940 device"
-	depends on LEDS_CLASS
-	depends on ARCH_H1940
-	help
-	  This option enables support for the LEDs on the h1940.
-
 config LEDS_COBALT_QUBE
 	tristate "LED Support for the Cobalt Qube series front LED"
 	depends on LEDS_CLASS
@@ -162,6 +162,16 @@ config LEDS_PCA9532
 	  LED controller. It is generally only useful
 	  as a platform driver
 
+config LEDS_PCA9532_GPIO
+	bool "Enable GPIO support for PCA9532"
+	depends on LEDS_PCA9532
+	depends on GPIOLIB
+	help
+	  Allow unused pins on PCA9532 to be used as gpio.
+
+	  To use a pin as gpio pca9532_type in pca9532_platform data needs to
+	  set to PCA9532_TYPE_GPIO.
+
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
 	depends on LEDS_CLASS
@@ -379,6 +389,16 @@ config LEDS_NETXBIG
 	  and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
 	  controlled through a GPIO extension bus.
 
+config LEDS_ASIC3
+	bool "LED support for the HTC ASIC3"
+	depends on MFD_ASIC3
+	default y
+	help
+	  This option enables support for the LEDs on the HTC ASIC3. The HTC
+	  ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
+	  cannot be used. This driver supports hardware blinking with an on+off
+	  period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 39c80fca84d2..bbfd2e367dc0 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -17,11 +17,11 @@ obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
 obj-$(CONFIG_LEDS_NET5501)		+= leds-net5501.o
 obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
 obj-$(CONFIG_LEDS_ALIX2)		+= leds-alix2.o
-obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
 obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
 obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
+obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
@@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
 obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
+obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index d5a4ade88991..dc3d3d83191a 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -131,7 +131,8 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 	if (!led_cdev->blink_brightness)
 		led_cdev->blink_brightness = led_cdev->max_brightness;
 
-	if (delay_on == led_cdev->blink_delay_on &&
+	if (led_get_trigger_data(led_cdev) &&
+	    delay_on == led_cdev->blink_delay_on &&
 	    delay_off == led_cdev->blink_delay_off)
 		return;
 
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 416def84d045..0d4c16678ace 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -17,7 +17,6 @@
 #include <linux/leds.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <linux/mfd/core.h>
 #include <linux/mfd/88pm860x.h>
 
 #define LED_PWM_SHIFT		(3)
@@ -171,7 +170,6 @@ static int pm860x_led_probe(struct platform_device *pdev)
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct pm860x_led_pdata *pdata;
 	struct pm860x_led *data;
-	struct mfd_cell *cell;
 	struct resource *res;
 	int ret;
 
@@ -181,10 +179,7 @@ static int pm860x_led_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	cell = pdev->dev.platform_data;
-	if (cell == NULL)
-		return -ENODEV;
-	pdata = cell->mfd_data;
+	pdata = pdev->dev.platform_data;
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "No platform data!\n");
 		return -EINVAL;
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
new file mode 100644
index 000000000000..22f847c890c9
--- /dev/null
+++ b/drivers/leds/leds-asic3.c
@@ -0,0 +1,165 @@
+/*
+ *  Copyright (C) 2011 Paul Parsons <lost.distance@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/asic3.h>
+#include <linux/mfd/core.h>
+
+/*
+ *	The HTC ASIC3 LED GPIOs are inputs, not outputs.
+ *	Hence we turn the LEDs on/off via the TimeBase register.
+ */
+
+/*
+ *	When TimeBase is 4 the clock resolution is about 32Hz.
+ *	This driver supports hardware blinking with an on+off
+ *	period from 62ms (2 clocks) to 125s (4000 clocks).
+ */
+#define MS_TO_CLK(ms)	DIV_ROUND_CLOSEST(((ms)*1024), 32000)
+#define CLK_TO_MS(clk)	(((clk)*32000)/1024)
+#define MAX_CLK		4000            /* Fits into 12-bit Time registers */
+#define MAX_MS		CLK_TO_MS(MAX_CLK)
+
+static const unsigned int led_n_base[ASIC3_NUM_LEDS] = {
+	[0] = ASIC3_LED_0_Base,
+	[1] = ASIC3_LED_1_Base,
+	[2] = ASIC3_LED_2_Base,
+};
+
+static void brightness_set(struct led_classdev *cdev,
+	enum led_brightness value)
+{
+	struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+	u32 timebase;
+	unsigned int base;
+
+	timebase = (value == LED_OFF) ? 0 : (LED_EN|0x4);
+
+	base = led_n_base[cell->id];
+	asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), 32);
+	asic3_write_register(asic, (base + ASIC3_LED_DutyTime), 32);
+	asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
+	asic3_write_register(asic, (base + ASIC3_LED_TimeBase), timebase);
+}
+
+static int blink_set(struct led_classdev *cdev,
+	unsigned long *delay_on,
+	unsigned long *delay_off)
+{
+	struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+	u32 on;
+	u32 off;
+	unsigned int base;
+
+	if (*delay_on > MAX_MS || *delay_off > MAX_MS)
+		return -EINVAL;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+		/* If both are zero then a sensible default should be chosen */
+		on = MS_TO_CLK(500);
+		off = MS_TO_CLK(500);
+	} else {
+		on = MS_TO_CLK(*delay_on);
+		off = MS_TO_CLK(*delay_off);
+		if ((on + off) > MAX_CLK)
+			return -EINVAL;
+	}
+
+	base = led_n_base[cell->id];
+	asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), (on + off));
+	asic3_write_register(asic, (base + ASIC3_LED_DutyTime), on);
+	asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
+	asic3_write_register(asic, (base + ASIC3_LED_TimeBase), (LED_EN|0x4));
+
+	*delay_on = CLK_TO_MS(on);
+	*delay_off = CLK_TO_MS(off);
+
+	return 0;
+}
+
+static int __devinit asic3_led_probe(struct platform_device *pdev)
+{
+	struct asic3_led *led = pdev->dev.platform_data;
+	int ret;
+
+	ret = mfd_cell_enable(pdev);
+	if (ret < 0)
+		goto ret0;
+
+	led->cdev = kzalloc(sizeof(struct led_classdev), GFP_KERNEL);
+	if (!led->cdev) {
+		ret = -ENOMEM;
+		goto ret1;
+	}
+
+	led->cdev->name = led->name;
+	led->cdev->default_trigger = led->default_trigger;
+	led->cdev->brightness_set = brightness_set;
+	led->cdev->blink_set = blink_set;
+
+	ret = led_classdev_register(&pdev->dev, led->cdev);
+	if (ret < 0)
+		goto ret2;
+
+	return 0;
+
+ret2:
+	kfree(led->cdev);
+ret1:
+	(void) mfd_cell_disable(pdev);
+ret0:
+	return ret;
+}
+
+static int __devexit asic3_led_remove(struct platform_device *pdev)
+{
+	struct asic3_led *led = pdev->dev.platform_data;
+
+	led_classdev_unregister(led->cdev);
+
+	kfree(led->cdev);
+
+	return mfd_cell_disable(pdev);
+}
+
+static struct platform_driver asic3_led_driver = {
+	.probe		= asic3_led_probe,
+	.remove		= __devexit_p(asic3_led_remove),
+	.driver		= {
+		.name	= "leds-asic3",
+		.owner	= THIS_MODULE,
+	},
+};
+
+MODULE_ALIAS("platform:leds-asic3");
+
+static int __init asic3_led_init(void)
+{
+	return platform_driver_register(&asic3_led_driver);
+}
+
+static void __exit asic3_led_exit(void)
+{
+	platform_driver_unregister(&asic3_led_driver);
+}
+
+module_init(asic3_led_init);
+module_exit(asic3_led_exit);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("HTC ASIC3 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-gpio-register.c b/drivers/leds/leds-gpio-register.c
new file mode 100644
index 000000000000..1c4ed5510f35
--- /dev/null
+++ b/drivers/leds/leds-gpio-register.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+/**
+ * gpio_led_register_device - register a gpio-led device
+ * @pdata: the platform data used for the new device
+ *
+ * Makes a copy of pdata and pdata->leds and registers a new leds-gpio device
+ * with the result. This allows to have pdata and pdata-leds in .init.rodata
+ * and so saves some bytes compared to a static struct platform_device with
+ * static platform data.
+ *
+ * Returns the registered device or an error pointer.
+ */
+struct platform_device *__init gpio_led_register_device(
+		int id, const struct gpio_led_platform_data *pdata)
+{
+	struct platform_device *ret;
+	struct gpio_led_platform_data _pdata = *pdata;
+
+	_pdata.leds = kmemdup(pdata->leds,
+			pdata->num_leds * sizeof(*pdata->leds), GFP_KERNEL);
+	if (!_pdata.leds)
+		return ERR_PTR(-ENOMEM);
+
+	ret = platform_device_register_resndata(NULL, "leds-gpio", id,
+			NULL, 0, &_pdata, sizeof(_pdata));
+	if (IS_ERR(ret))
+		kfree(_pdata.leds);
+
+	return ret;
+}
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
deleted file mode 100644
index 173d104d9ff2..000000000000
--- a/drivers/leds/leds-h1940.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * drivers/leds/leds-h1940.c
- * Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- *
- * H1940 leds driver
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-
-/*
- * Green led.
- */
-static void h1940_greenled_set(struct led_classdev *led_dev,
-			       enum led_brightness value)
-{
-	switch (value) {
-	case LED_HALF:
-		h1940_latch_control(0, H1940_LATCH_LED_FLASH);
-		s3c2410_gpio_setpin(S3C2410_GPA7, 1);
-		break;
-	case LED_FULL:
-		h1940_latch_control(0, H1940_LATCH_LED_GREEN);
-		s3c2410_gpio_setpin(S3C2410_GPA7, 1);
-		break;
-	default:
-	case LED_OFF:
-		h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
-		h1940_latch_control(H1940_LATCH_LED_GREEN, 0);
-		s3c2410_gpio_setpin(S3C2410_GPA7, 0);
-		break;
-	}
-}
-
-static struct led_classdev h1940_greenled = {
-	.name			= "h1940:green",
-	.brightness_set		= h1940_greenled_set,
-	.default_trigger	= "h1940-charger",
-};
-
-/*
- * Red led.
- */
-static void h1940_redled_set(struct led_classdev *led_dev,
-			     enum led_brightness value)
-{
-	switch (value) {
-	case LED_HALF:
-		h1940_latch_control(0, H1940_LATCH_LED_FLASH);
-		s3c2410_gpio_setpin(S3C2410_GPA1, 1);
-		break;
-	case LED_FULL:
-		h1940_latch_control(0, H1940_LATCH_LED_RED);
-		s3c2410_gpio_setpin(S3C2410_GPA1, 1);
-		break;
-	default:
-	case LED_OFF:
-		h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
-		h1940_latch_control(H1940_LATCH_LED_RED, 0);
-		s3c2410_gpio_setpin(S3C2410_GPA1, 0);
-		break;
-	}
-}
-
-static struct led_classdev h1940_redled = {
-	.name			= "h1940:red",
-	.brightness_set		= h1940_redled_set,
-	.default_trigger	= "h1940-charger",
-};
-
-/*
- * Blue led.
- * (it can only be blue flashing led)
- */
-static void h1940_blueled_set(struct led_classdev *led_dev,
-			      enum led_brightness value)
-{
-	if (value) {
-		/* flashing Blue */
-		h1940_latch_control(0, H1940_LATCH_LED_FLASH);
-		s3c2410_gpio_setpin(S3C2410_GPA3, 1);
-	} else {
-		h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
-		s3c2410_gpio_setpin(S3C2410_GPA3, 0);
-	}
-
-}
-
-static struct led_classdev h1940_blueled = {
-	.name			= "h1940:blue",
-	.brightness_set		= h1940_blueled_set,
-	.default_trigger	= "h1940-bluetooth",
-};
-
-static int __devinit h1940leds_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &h1940_greenled);
-	if (ret)
-		goto err_green;
-
-	ret = led_classdev_register(&pdev->dev, &h1940_redled);
-	if (ret)
-		goto err_red;
-
-	ret = led_classdev_register(&pdev->dev, &h1940_blueled);
-	if (ret)
-		goto err_blue;
-
-	return 0;
-
-err_blue:
-	led_classdev_unregister(&h1940_redled);
-err_red:
-	led_classdev_unregister(&h1940_greenled);
-err_green:
-	return ret;
-}
-
-static int h1940leds_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&h1940_greenled);
-	led_classdev_unregister(&h1940_redled);
-	led_classdev_unregister(&h1940_blueled);
-	return 0;
-}
-
-
-static struct platform_driver h1940leds_driver = {
-	.driver		= {
-		.name	= "h1940-leds",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= h1940leds_probe,
-	.remove		= h1940leds_remove,
-};
-
-
-static int __init h1940leds_init(void)
-{
-	return platform_driver_register(&h1940leds_driver);
-}
-
-static void __exit h1940leds_exit(void)
-{
-	platform_driver_unregister(&h1940leds_driver);
-}
-
-module_init(h1940leds_init);
-module_exit(h1940leds_exit);
-
-MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
-MODULE_DESCRIPTION("LED driver for the iPAQ H1940");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:h1940-leds");
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index b37e6186d0fa..4d7ce7631acf 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -17,6 +17,7 @@
 #include <linux/input.h>
 #include <linux/led-lm3530.h>
 #include <linux/types.h>
+#include <linux/regulator/consumer.h>
 
 #define LM3530_LED_DEV "lcd-backlight"
 #define LM3530_NAME "lm3530-led"
@@ -96,12 +97,18 @@ static struct lm3530_mode_map mode_map[] = {
  * @client: i2c client
  * @pdata: LM3530 platform data
  * @mode: mode of operation - manual, ALS, PWM
+ * @regulator: regulator
+ * @brighness: previous brightness value
+ * @enable: regulator is enabled
  */
 struct lm3530_data {
 	struct led_classdev led_dev;
 	struct i2c_client *client;
 	struct lm3530_platform_data *pdata;
 	enum lm3530_mode mode;
+	struct regulator *regulator;
+	enum led_brightness brightness;
+	bool enable;
 };
 
 static const u8 lm3530_reg[LM3530_REG_MAX] = {
@@ -172,7 +179,10 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 	brt_ramp = (pltfm->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
 			(pltfm->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
 
-	brightness = pltfm->brt_val;
+	if (drvdata->brightness)
+		brightness = drvdata->brightness;
+	else
+		brightness = drvdata->brightness = pltfm->brt_val;
 
 	reg_val[0] = gen_config;	/* LM3530_GEN_CONFIG */
 	reg_val[1] = als_config;	/* LM3530_ALS_CONFIG */
@@ -190,6 +200,16 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 	reg_val[13] = LM3530_DEF_ZT_3;	/* LM3530_ALS_Z3T_REG */
 	reg_val[14] = LM3530_DEF_ZT_4;	/* LM3530_ALS_Z4T_REG */
 
+	if (!drvdata->enable) {
+		ret = regulator_enable(drvdata->regulator);
+		if (ret) {
+			dev_err(&drvdata->client->dev,
+					"Enable regulator failed\n");
+			return ret;
+		}
+		drvdata->enable = true;
+	}
+
 	for (i = 0; i < LM3530_REG_MAX; i++) {
 		ret = i2c_smbus_write_byte_data(client,
 				lm3530_reg[i], reg_val[i]);
@@ -210,12 +230,31 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev,
 	switch (drvdata->mode) {
 	case LM3530_BL_MODE_MANUAL:
 
+		if (!drvdata->enable) {
+			err = lm3530_init_registers(drvdata);
+			if (err) {
+				dev_err(&drvdata->client->dev,
+					"Register Init failed: %d\n", err);
+				break;
+			}
+		}
+
 		/* set the brightness in brightness control register*/
 		err = i2c_smbus_write_byte_data(drvdata->client,
 				LM3530_BRT_CTRL_REG, brt_val / 2);
 		if (err)
 			dev_err(&drvdata->client->dev,
 				"Unable to set brightness: %d\n", err);
+		else
+			drvdata->brightness = brt_val / 2;
+
+		if (brt_val == 0) {
+			err = regulator_disable(drvdata->regulator);
+			if (err)
+				dev_err(&drvdata->client->dev,
+					"Disable regulator failed\n");
+			drvdata->enable = false;
+		}
 		break;
 	case LM3530_BL_MODE_ALS:
 		break;
@@ -297,20 +336,31 @@ static int __devinit lm3530_probe(struct i2c_client *client,
 	drvdata->mode = pdata->mode;
 	drvdata->client = client;
 	drvdata->pdata = pdata;
+	drvdata->brightness = LED_OFF;
+	drvdata->enable = false;
 	drvdata->led_dev.name = LM3530_LED_DEV;
 	drvdata->led_dev.brightness_set = lm3530_brightness_set;
 
 	i2c_set_clientdata(client, drvdata);
 
-	err = lm3530_init_registers(drvdata);
-	if (err < 0) {
-		dev_err(&client->dev, "Register Init failed: %d\n", err);
-		err = -ENODEV;
-		goto err_reg_init;
+	drvdata->regulator = regulator_get(&client->dev, "vin");
+	if (IS_ERR(drvdata->regulator)) {
+		dev_err(&client->dev, "regulator get failed\n");
+		err = PTR_ERR(drvdata->regulator);
+		drvdata->regulator = NULL;
+		goto err_regulator_get;
 	}
 
-	err = led_classdev_register((struct device *)
-				      &client->dev, &drvdata->led_dev);
+	if (drvdata->pdata->brt_val) {
+		err = lm3530_init_registers(drvdata);
+		if (err < 0) {
+			dev_err(&client->dev,
+				"Register Init failed: %d\n", err);
+			err = -ENODEV;
+			goto err_reg_init;
+		}
+	}
+	err = led_classdev_register(&client->dev, &drvdata->led_dev);
 	if (err < 0) {
 		dev_err(&client->dev, "Register led class failed: %d\n", err);
 		err = -ENODEV;
@@ -330,6 +380,9 @@ err_create_file:
 	led_classdev_unregister(&drvdata->led_dev);
 err_class_register:
 err_reg_init:
+	regulator_put(drvdata->regulator);
+err_regulator_get:
+	i2c_set_clientdata(client, NULL);
 	kfree(drvdata);
 err_out:
 	return err;
@@ -340,6 +393,10 @@ static int __devexit lm3530_remove(struct i2c_client *client)
 	struct lm3530_data *drvdata = i2c_get_clientdata(client);
 
 	device_remove_file(drvdata->led_dev.dev, &dev_attr_mode);
+
+	if (drvdata->enable)
+		regulator_disable(drvdata->regulator);
+	regulator_put(drvdata->regulator);
 	led_classdev_unregister(&drvdata->led_dev);
 	kfree(drvdata);
 	return 0;
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index 126ca7955f6e..f369e56d6547 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -22,7 +22,6 @@
 #include <linux/leds.h>
 #include <linux/workqueue.h>
 #include <linux/mfd/mc13783.h>
-#include <linux/mfd/core.h>
 #include <linux/slab.h>
 
 struct mc13783_led {
@@ -184,7 +183,7 @@ static int __devinit mc13783_led_setup(struct mc13783_led *led, int max_current)
 
 static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = mfd_get_data(pdev);
+	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
 	int ret = 0;
 	int reg = 0;
@@ -265,7 +264,7 @@ out:
 
 static int __devinit mc13783_led_probe(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = mfd_get_data(pdev);
+	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct mc13783_led_platform_data *led_cur;
 	struct mc13783_led *led, *led_dat;
 	int ret, i;
@@ -352,7 +351,7 @@ err_free:
 
 static int __devexit mc13783_led_remove(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = mfd_get_data(pdev);
+	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct mc13783_led *led = platform_get_drvdata(pdev);
 	struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
 	int i;
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 5bf63af09ddf..d8d3a1e910a1 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -1,13 +1,14 @@
 /*
  * pca9532.c - 16-bit Led dimmer
  *
+ * Copyright (C) 2011 Jan Weitzel
  * Copyright (C) 2008 Riku Voipio
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
  *
- * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ * Datasheet: http://www.nxp.com/documents/data_sheet/PCA9532.pdf
  *
  */
 
@@ -19,21 +20,32 @@
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 #include <linux/leds-pca9532.h>
+#include <linux/gpio.h>
 
-#define PCA9532_REG_PSC(i) (0x2+(i)*2)
-#define PCA9532_REG_PWM(i) (0x3+(i)*2)
-#define PCA9532_REG_LS0  0x6
-#define LED_REG(led) ((led>>2)+PCA9532_REG_LS0)
-#define LED_NUM(led) (led & 0x3)
+/* m =  num_leds*/
+#define PCA9532_REG_INPUT(i)	((i) >> 3)
+#define PCA9532_REG_OFFSET(m)	((m) >> 4)
+#define PCA9532_REG_PSC(m, i)	(PCA9532_REG_OFFSET(m) + 0x1 + (i) * 2)
+#define PCA9532_REG_PWM(m, i)	(PCA9532_REG_OFFSET(m) + 0x2 + (i) * 2)
+#define LED_REG(m, led)		(PCA9532_REG_OFFSET(m) + 0x5 + (led >> 2))
+#define LED_NUM(led)		(led & 0x3)
 
 #define ldev_to_led(c)       container_of(c, struct pca9532_led, ldev)
 
+struct pca9532_chip_info {
+	u8	num_leds;
+};
+
 struct pca9532_data {
 	struct i2c_client *client;
 	struct pca9532_led leds[16];
 	struct mutex update_lock;
 	struct input_dev *idev;
 	struct work_struct work;
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	struct gpio_chip gpio;
+#endif
+	const struct pca9532_chip_info *chip_info;
 	u8 pwm[2];
 	u8 psc[2];
 };
@@ -42,16 +54,41 @@ static int pca9532_probe(struct i2c_client *client,
 	const struct i2c_device_id *id);
 static int pca9532_remove(struct i2c_client *client);
 
+enum {
+	pca9530,
+	pca9531,
+	pca9532,
+	pca9533,
+};
+
 static const struct i2c_device_id pca9532_id[] = {
-	{ "pca9532", 0 },
+	{ "pca9530", pca9530 },
+	{ "pca9531", pca9531 },
+	{ "pca9532", pca9532 },
+	{ "pca9533", pca9533 },
 	{ }
 };
 
 MODULE_DEVICE_TABLE(i2c, pca9532_id);
 
+static const struct pca9532_chip_info pca9532_chip_info_tbl[] = {
+	[pca9530] = {
+		.num_leds = 2,
+	},
+	[pca9531] = {
+		.num_leds = 8,
+	},
+	[pca9532] = {
+		.num_leds = 16,
+	},
+	[pca9533] = {
+		.num_leds = 4,
+	},
+};
+
 static struct i2c_driver pca9532_driver = {
 	.driver = {
-		.name = "pca9532",
+		.name = "pca953x",
 	},
 	.probe = pca9532_probe,
 	.remove = pca9532_remove,
@@ -68,7 +105,7 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
 {
 	int a = 0, b = 0, i = 0;
 	struct pca9532_data *data = i2c_get_clientdata(client);
-	for (i = 0; i < 16; i++) {
+	for (i = 0; i < data->chip_info->num_leds; i++) {
 		if (data->leds[i].type == PCA9532_TYPE_LED &&
 			data->leds[i].state == PCA9532_PWM0+pwm) {
 				a++;
@@ -92,10 +129,12 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
 static int pca9532_setpwm(struct i2c_client *client, int pwm)
 {
 	struct pca9532_data *data = i2c_get_clientdata(client);
+	u8 maxleds = data->chip_info->num_leds;
+
 	mutex_lock(&data->update_lock);
-	i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, pwm),
 		data->pwm[pwm]);
-	i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, pwm),
 		data->psc[pwm]);
 	mutex_unlock(&data->update_lock);
 	return 0;
@@ -106,15 +145,16 @@ static void pca9532_setled(struct pca9532_led *led)
 {
 	struct i2c_client *client = led->client;
 	struct pca9532_data *data = i2c_get_clientdata(client);
+	u8 maxleds = data->chip_info->num_leds;
 	char reg;
 
 	mutex_lock(&data->update_lock);
-	reg = i2c_smbus_read_byte_data(client, LED_REG(led->id));
+	reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
 	/* zero led bits */
 	reg = reg & ~(0x3<<LED_NUM(led->id)*2);
 	/* set the new value */
 	reg = reg | (led->state << LED_NUM(led->id)*2);
-	i2c_smbus_write_byte_data(client, LED_REG(led->id), reg);
+	i2c_smbus_write_byte_data(client, LED_REG(maxleds, led->id), reg);
 	mutex_unlock(&data->update_lock);
 }
 
@@ -183,10 +223,12 @@ static int pca9532_event(struct input_dev *dev, unsigned int type,
 
 static void pca9532_input_work(struct work_struct *work)
 {
-	struct pca9532_data *data;
-	data = container_of(work, struct pca9532_data, work);
+	struct pca9532_data *data =
+		container_of(work, struct pca9532_data, work);
+	u8 maxleds = data->chip_info->num_leds;
+
 	mutex_lock(&data->update_lock);
-	i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
+	i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(maxleds, 1),
 		data->pwm[1]);
 	mutex_unlock(&data->update_lock);
 }
@@ -200,16 +242,68 @@ static void pca9532_led_work(struct work_struct *work)
 	pca9532_setled(led);
 }
 
-static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
+{
+	struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+	struct pca9532_led *led = &data->leds[offset];
+
+	if (led->type == PCA9532_TYPE_GPIO)
+		return 0;
+
+	return -EBUSY;
+}
+
+static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+	struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+	struct pca9532_led *led = &data->leds[offset];
+
+	if (val)
+		led->state = PCA9532_ON;
+	else
+		led->state = PCA9532_OFF;
+
+	pca9532_setled(led);
+}
+
+static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+	unsigned char reg;
+
+	reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
+
+	return !!(reg & (1 << (offset % 8)));
+}
+
+static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	/* To use as input ensure pin is not driven */
+	pca9532_gpio_set_value(gc, offset, 0);
+
+	return 0;
+}
+
+static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
+{
+	pca9532_gpio_set_value(gc, offset, val);
+
+	return 0;
+}
+#endif /* CONFIG_LEDS_PCA9532_GPIO */
+
+static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
 {
 	int i = n_devs;
 
 	if (!data)
-		return;
+		return -EINVAL;
 
 	while (--i >= 0) {
 		switch (data->leds[i].type) {
 		case PCA9532_TYPE_NONE:
+		case PCA9532_TYPE_GPIO:
 			break;
 		case PCA9532_TYPE_LED:
 			led_classdev_unregister(&data->leds[i].ldev);
@@ -224,23 +318,38 @@ static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
 			break;
 		}
 	}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	if (data->gpio.dev) {
+		int err = gpiochip_remove(&data->gpio);
+		if (err) {
+			dev_err(&data->client->dev, "%s failed, %d\n",
+						"gpiochip_remove()", err);
+			return err;
+		}
+	}
+#endif
+
+	return 0;
 }
 
 static int pca9532_configure(struct i2c_client *client,
 	struct pca9532_data *data, struct pca9532_platform_data *pdata)
 {
 	int i, err = 0;
+	int gpios = 0;
+	u8 maxleds = data->chip_info->num_leds;
 
 	for (i = 0; i < 2; i++)	{
 		data->pwm[i] = pdata->pwm[i];
 		data->psc[i] = pdata->psc[i];
-		i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i),
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, i),
 			data->pwm[i]);
-		i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i),
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, i),
 			data->psc[i]);
 	}
 
-	for (i = 0; i < 16; i++) {
+	for (i = 0; i < data->chip_info->num_leds; i++) {
 		struct pca9532_led *led = &data->leds[i];
 		struct pca9532_led *pled = &pdata->leds[i];
 		led->client = client;
@@ -249,6 +358,9 @@ static int pca9532_configure(struct i2c_client *client,
 		switch (led->type) {
 		case PCA9532_TYPE_NONE:
 			break;
+		case PCA9532_TYPE_GPIO:
+			gpios++;
+			break;
 		case PCA9532_TYPE_LED:
 			led->state = pled->state;
 			led->name = pled->name;
@@ -297,6 +409,34 @@ static int pca9532_configure(struct i2c_client *client,
 			break;
 		}
 	}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	if (gpios) {
+		data->gpio.label = "gpio-pca9532";
+		data->gpio.direction_input = pca9532_gpio_direction_input;
+		data->gpio.direction_output = pca9532_gpio_direction_output;
+		data->gpio.set = pca9532_gpio_set_value;
+		data->gpio.get = pca9532_gpio_get_value;
+		data->gpio.request = pca9532_gpio_request_pin;
+		data->gpio.can_sleep = 1;
+		data->gpio.base = pdata->gpio_base;
+		data->gpio.ngpio = data->chip_info->num_leds;
+		data->gpio.dev = &client->dev;
+		data->gpio.owner = THIS_MODULE;
+
+		err = gpiochip_add(&data->gpio);
+		if (err) {
+			/* Use data->gpio.dev as a flag for freeing gpiochip */
+			data->gpio.dev = NULL;
+			dev_warn(&client->dev, "could not add gpiochip\n");
+		} else {
+			dev_info(&client->dev, "gpios %i...%i\n",
+				data->gpio.base, data->gpio.base +
+				data->gpio.ngpio - 1);
+		}
+	}
+#endif
+
 	return 0;
 
 exit:
@@ -322,6 +462,8 @@ static int pca9532_probe(struct i2c_client *client,
 	if (!data)
 		return -ENOMEM;
 
+	data->chip_info = &pca9532_chip_info_tbl[id->driver_data];
+
 	dev_info(&client->dev, "setting platform data\n");
 	i2c_set_clientdata(client, data);
 	data->client = client;
@@ -337,7 +479,12 @@ static int pca9532_probe(struct i2c_client *client,
 static int pca9532_remove(struct i2c_client *client)
 {
 	struct pca9532_data *data = i2c_get_clientdata(client);
-	pca9532_destroy_devices(data, 16);
+	int err;
+
+	err = pca9532_destroy_devices(data, data->chip_info->num_leds);
+	if (err)
+		return err;
+
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
index 2dd8ecbfdc31..e77c7f8dcdd4 100644
--- a/drivers/leds/leds.h
+++ b/drivers/leds/leds.h
@@ -40,10 +40,17 @@ void led_trigger_set_default(struct led_classdev *led_cdev);
 void led_trigger_set(struct led_classdev *led_cdev,
 			struct led_trigger *trigger);
 void led_trigger_remove(struct led_classdev *led_cdev);
+
+static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
+{
+	return led_cdev->trigger_data;
+}
+
 #else
 #define led_trigger_set_default(x) do {} while (0)
 #define led_trigger_set(x, y) do {} while (0)
 #define led_trigger_remove(x) do {} while (0)
+#define led_get_trigger_data(x) (NULL)
 #endif
 
 ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index b09bcbeade9c..d87c9d02f786 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -91,6 +91,9 @@ static void timer_trig_activate(struct led_classdev *led_cdev)
 	if (rc)
 		goto err_out_delayon;
 
+	led_blink_set(led_cdev, &led_cdev->blink_delay_on,
+		      &led_cdev->blink_delay_off);
+
 	led_cdev->trigger_data = (void *)1;
 
 	return;