isdn: whitespace coding style cleanup

isdn source code uses a not-current coding style.

Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.

Done with emacs and some scripts and some typing.

Built x86 allyesconfig.
No detected change in objdump -d or size.

Signed-off-by: Joe Perches <joe@perches.com>

1 files changed, 11 insertions, 11 deletions

diff --git a/drivers/isdn/hardware/mISDN/speedfax.c b/drivers/isdn/hardware/mISDN/speedfax.c
index 4d0d41ea1228..04689935148b 100644
--- a/drivers/isdn/hardware/mISDN/speedfax.c
+++ b/drivers/isdn/hardware/mISDN/speedfax.c
@@ -147,10 +147,10 @@ Start_ISAR:
 		goto Start_ISAR;
 	if (cnt < irqloops)
 		pr_debug("%s: %d irqloops cpu%d\n", sf->name,
-			irqloops - cnt, smp_processor_id());
+			 irqloops - cnt, smp_processor_id());
 	if (irqloops && !cnt)
 		pr_notice("%s: %d IRQ LOOP cpu%d\n", sf->name,
-			irqloops, smp_processor_id());
+			  irqloops, smp_processor_id());
 	spin_unlock(&sf->lock);
 	return IRQ_HANDLED;
 }
@@ -266,7 +266,7 @@ sfax_dctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
 		break;
 	case CLOSE_CHANNEL:
 		pr_debug("%s: dev(%d) close from %p\n", sf->name,
-			dch->dev.id, __builtin_return_address(0));
+			 dch->dev.id, __builtin_return_address(0));
 		module_put(THIS_MODULE);
 		break;
 	case CONTROL_CHANNEL:
@@ -306,10 +306,10 @@ init_card(struct sfax_hw *sf)
 		msleep_interruptible(10);
 		if (debug & DEBUG_HW)
 			pr_notice("%s: IRQ %d count %d\n", sf->name,
-				sf->irq, sf->irqcnt);
+				  sf->irq, sf->irqcnt);
 		if (!sf->irqcnt) {
 			pr_info("%s: IRQ(%d) got no requests during init %d\n",
-			       sf->name, sf->irq, 3 - cnt);
+				sf->name, sf->irq, 3 - cnt);
 		} else
 			return 0;
 	}
@@ -325,7 +325,7 @@ setup_speedfax(struct sfax_hw *sf)
 
 	if (!request_region(sf->cfg, 256, sf->name)) {
 		pr_info("mISDN: %s config port %x-%x already in use\n",
-		       sf->name, sf->cfg, sf->cfg + 255);
+			sf->name, sf->cfg, sf->cfg + 255);
 		return -EIO;
 	}
 	outb(0xff, sf->cfg);
@@ -396,7 +396,7 @@ setup_instance(struct sfax_hw *card)
 	}
 	if (debug & DEBUG_HW)
 		pr_notice("%s: got firmware %zu bytes\n",
-			card->name, firmware->size);
+			  card->name, firmware->size);
 
 	mISDNisac_init(&card->isac, card);
 
@@ -406,7 +406,7 @@ setup_instance(struct sfax_hw *card)
 	for (i = 0; i < 2; i++) {
 		set_channelmap(i + 1, card->isac.dch.dev.channelmap);
 		list_add(&card->isar.ch[i].bch.ch.list,
-			&card->isac.dch.dev.bchannels);
+			 &card->isac.dch.dev.bchannels);
 	}
 
 	err = setup_speedfax(card);
@@ -416,7 +416,7 @@ setup_instance(struct sfax_hw *card)
 	if (err)
 		goto error;
 	err = mISDN_register_device(&card->isac.dch.dev,
-		&card->pdev->dev, card->name);
+				    &card->pdev->dev, card->name);
 	if (err)
 		goto error;
 	err = init_card(card);
@@ -466,7 +466,7 @@ sfaxpci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	pr_notice("mISDN: Speedfax found adapter %s at %s\n",
-		(char *)ent->driver_data, pci_name(pdev));
+		  (char *)ent->driver_data, pci_name(pdev));
 
 	card->cfg = pci_resource_start(pdev, 0);
 	card->irq = pdev->irq;
@@ -514,7 +514,7 @@ Speedfax_init(void)
 	int err;
 
 	pr_notice("Sedlbauer Speedfax+ Driver Rev. %s\n",
-		SPEEDFAX_REV);
+		  SPEEDFAX_REV);
 	err = pci_register_driver(&sfaxpci_driver);
 	return err;
 }