Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 21 insertions, 21 deletions

diff --git a/drivers/isdn/capi/capidrv.h b/drivers/isdn/capi/capidrv.h
index 1e698e1e269f..4466b2e0176d 100644
--- a/drivers/isdn/capi/capidrv.h
+++ b/drivers/isdn/capi/capidrv.h
@@ -34,7 +34,7 @@
  * per plci state machine
  */
 #define ST_PLCI_NONE			0	/* P-0 */
-#define ST_PLCI_OUTGOING 		1	/* P-0.1 */
+#define ST_PLCI_OUTGOING		1	/* P-0.1 */
 #define ST_PLCI_ALLOCATED		2	/* P-1 */
 #define ST_PLCI_ACTIVE			3	/* P-ACT */
 #define ST_PLCI_INCOMING		4	/* P-2 */
@@ -47,20 +47,20 @@
 #define ST_PLCI_HELD			11	/* P-HELD */
 
 #define EV_PLCI_CONNECT_REQ		1	/* P-0 -> P-0.1
-                                                 */
+						 */
 #define EV_PLCI_CONNECT_CONF_ERROR	2	/* P-0.1 -> P-0
-                                                 */
+						 */
 #define EV_PLCI_CONNECT_CONF_OK		3	/* P-0.1 -> P-1
-                                                 */
+						 */
 #define EV_PLCI_FACILITY_IND_UP		4	/* P-0 -> P-1
-                                                 */
+						 */
 #define EV_PLCI_CONNECT_IND		5	/* P-0 -> P-2
-                                                 */
+						 */
 #define EV_PLCI_CONNECT_ACTIVE_IND	6	/* P-1 -> P-ACT
-                                                 */
+						 */
 #define EV_PLCI_CONNECT_REJECT		7	/* P-2 -> P-5
 						   P-3 -> P-5
-						 */
+						*/
 #define EV_PLCI_DISCONNECT_REQ		8	/* P-1 -> P-5
 						   P-2 -> P-5
 						   P-3 -> P-5
@@ -68,7 +68,7 @@
 						   P-ACT -> P-5
 						   P-Res -> P-5 (*)
 						   P-HELD -> P-5 (*)
-						   */
+						*/
 #define EV_PLCI_DISCONNECT_IND		9	/* P-1 -> P-6
 						   P-2 -> P-6
 						   P-3 -> P-6
@@ -77,35 +77,35 @@
 						   P-ACT -> P-6
 						   P-Res -> P-6 (*)
 						   P-HELD -> P-6 (*)
-						   */
+						*/
 #define EV_PLCI_FACILITY_IND_DOWN	10	/* P-0.1 -> P-5
 						   P-1 -> P-5
 						   P-ACT -> P-5
 						   P-2 -> P-5
 						   P-3 -> P-5
 						   P-4 -> P-5
-						   */
+						*/
 #define EV_PLCI_DISCONNECT_RESP		11	/* P-6 -> P-0
-                                                   */
+						 */
 #define EV_PLCI_CONNECT_RESP		12	/* P-6 -> P-0
-                                                   */
+						 */
 
 #define EV_PLCI_RESUME_REQ		13	/* P-0 -> P-0.Res
-                                                 */
+						 */
 #define EV_PLCI_RESUME_CONF_OK		14	/* P-0.Res -> P-Res
-                                                 */
+						 */
 #define EV_PLCI_RESUME_CONF_ERROR	15	/* P-0.Res -> P-0
-                                                 */
+						 */
 #define EV_PLCI_RESUME_IND		16	/* P-Res -> P-ACT
-                                                 */
+						 */
 #define EV_PLCI_HOLD_IND		17	/* P-ACT -> P-HELD
-                                                 */
+						 */
 #define EV_PLCI_RETRIEVE_IND		18	/* P-HELD -> P-ACT
-                                                 */
+						 */
 #define EV_PLCI_SUSPEND_IND		19	/* P-ACT -> P-5
-                                                 */
+						 */
 #define EV_PLCI_CD_IND			20	/* P-2 -> P-5
-                                                 */
+						 */
 
 /*
  * per ncci state machine