ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 514 deletions

diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
deleted file mode 100644
index 2a812d3207e9..000000000000
--- a/drivers/ide/pci/via82cxxx.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * VIA IDE driver for Linux. Supported southbridges:
- *
- *   vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
- *   vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
- *   vt8235, vt8237, vt8237a
- *
- * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
- *
- * Based on the work of:
- *	Michel Aubry
- *	Jeff Garzik
- *	Andre Hedrick
- *
- * Documentation:
- *	Obsolete device documentation publically available from via.com.tw
- *	Current device documentation available under NDA only
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/dmi.h>
-
-#ifdef CONFIG_PPC_CHRP
-#include <asm/processor.h>
-#endif
-
-#define DRV_NAME "via82cxxx"
-
-#define VIA_IDE_ENABLE		0x40
-#define VIA_IDE_CONFIG		0x41
-#define VIA_FIFO_CONFIG		0x43
-#define VIA_MISC_1		0x44
-#define VIA_MISC_2		0x45
-#define VIA_MISC_3		0x46
-#define VIA_DRIVE_TIMING	0x48
-#define VIA_8BIT_TIMING		0x4e
-#define VIA_ADDRESS_SETUP	0x4c
-#define VIA_UDMA_TIMING		0x50
-
-#define VIA_BAD_PREQ		0x01 /* Crashes if PREQ# till DDACK# set */
-#define VIA_BAD_CLK66		0x02 /* 66 MHz clock doesn't work correctly */
-#define VIA_SET_FIFO		0x04 /* Needs to have FIFO split set */
-#define VIA_NO_UNMASK		0x08 /* Doesn't work with IRQ unmasking on */
-#define VIA_BAD_ID		0x10 /* Has wrong vendor ID (0x1107) */
-#define VIA_BAD_AST		0x20 /* Don't touch Address Setup Timing */
-
-/*
- * VIA SouthBridge chips.
- */
-
-static struct via_isa_bridge {
-	char *name;
-	u16 id;
-	u8 rev_min;
-	u8 rev_max;
-	u8 udma_mask;
-	u8 flags;
-} via_isa_bridges[] = {
-	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt8233c",	PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, ATA_UDMA5, },
-	{ "vt8233",	PCI_DEVICE_ID_VIA_8233_0,   0x00, 0x2f, ATA_UDMA5, },
-	{ "vt8231",	PCI_DEVICE_ID_VIA_8231,     0x00, 0x2f, ATA_UDMA5, },
-	{ "vt82c686b",	PCI_DEVICE_ID_VIA_82C686,   0x40, 0x4f, ATA_UDMA5, },
-	{ "vt82c686a",	PCI_DEVICE_ID_VIA_82C686,   0x10, 0x2f, ATA_UDMA4, },
-	{ "vt82c686",	PCI_DEVICE_ID_VIA_82C686,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
-	{ "vt82c596b",	PCI_DEVICE_ID_VIA_82C596,   0x10, 0x2f, ATA_UDMA4, },
-	{ "vt82c596a",	PCI_DEVICE_ID_VIA_82C596,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
-	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
-	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
-	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
-	{ "vt82c586a",	PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
-	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f,      0x00, VIA_SET_FIFO },
-	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
-	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
-	{ NULL }
-};
-
-static unsigned int via_clock;
-static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
-
-struct via82cxxx_dev
-{
-	struct via_isa_bridge *via_config;
-	unsigned int via_80w;
-};
-
-/**
- *	via_set_speed			-	write timing registers
- *	@dev: PCI device
- *	@dn: device
- *	@timing: IDE timing data to use
- *
- *	via_set_speed writes timing values to the chipset registers
- */
-
-static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct ide_host *host = pci_get_drvdata(dev);
-	struct via82cxxx_dev *vdev = host->host_priv;
-	u8 t;
-
-	if (~vdev->via_config->flags & VIA_BAD_AST) {
-		pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
-		t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
-		pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
-	}
-
-	pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
-		((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
-
-	pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
-		((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
-
-	switch (vdev->via_config->udma_mask) {
-	case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
-	case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
-	case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
-	case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
-	default: return;
-	}
-
-	pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
-}
-
-/**
- *	via_set_drive		-	configure transfer mode
- *	@drive: Drive to set up
- *	@speed: desired speed
- *
- *	via_set_drive() computes timing values configures the chipset to
- *	a desired transfer mode.  It also can be called by upper layers.
- */
-
-static void via_set_drive(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	ide_drive_t *peer = ide_get_pair_dev(drive);
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct ide_host *host = pci_get_drvdata(dev);
-	struct via82cxxx_dev *vdev = host->host_priv;
-	struct ide_timing t, p;
-	unsigned int T, UT;
-
-	T = 1000000000 / via_clock;
-
-	switch (vdev->via_config->udma_mask) {
-	case ATA_UDMA2: UT = T;   break;
-	case ATA_UDMA4: UT = T/2; break;
-	case ATA_UDMA5: UT = T/3; break;
-	case ATA_UDMA6: UT = T/4; break;
-	default:	UT = T;
-	}
-
-	ide_timing_compute(drive, speed, &t, T, UT);
-
-	if (peer) {
-		ide_timing_compute(peer, peer->current_speed, &p, T, UT);
-		ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
-	}
-
-	via_set_speed(HWIF(drive), drive->dn, &t);
-}
-
-/**
- *	via_set_pio_mode	-	set host controller for PIO mode
- *	@drive: drive
- *	@pio: PIO mode number
- *
- *	A callback from the upper layers for PIO-only tuning.
- */
-
-static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	via_set_drive(drive, XFER_PIO_0 + pio);
-}
-
-static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
-{
-	struct via_isa_bridge *via_config;
-
-	for (via_config = via_isa_bridges; via_config->id; via_config++)
-		if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
-			!!(via_config->flags & VIA_BAD_ID),
-			via_config->id, NULL))) {
-
-			if ((*isa)->revision >= via_config->rev_min &&
-			    (*isa)->revision <= via_config->rev_max)
-				break;
-			pci_dev_put(*isa);
-		}
-
-	return via_config;
-}
-
-/*
- * Check and handle 80-wire cable presence
- */
-static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
-{
-	int i;
-
-	switch (vdev->via_config->udma_mask) {
-		case ATA_UDMA4:
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> (i & 16)) & 8) &&
-				    ((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 2)) {
-					/*
-					 * 2x PCI clock and
-					 * UDMA w/ < 3T/cycle
-					 */
-					vdev->via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-		case ATA_UDMA5:
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> i) & 0x10) ||
-				    (((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 4))) {
-					/* BIOS 80-wire bit or
-					 * UDMA w/ < 60ns/cycle
-					 */
-					vdev->via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-		case ATA_UDMA6:
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> i) & 0x10) ||
-				    (((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 6))) {
-					/* BIOS 80-wire bit or
-					 * UDMA w/ < 60ns/cycle
-					 */
-					vdev->via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-	}
-}
-
-/**
- *	init_chipset_via82cxxx	-	initialization handler
- *	@dev: PCI device
- *
- *	The initialization callback. Here we determine the IDE chip type
- *	and initialize its drive independent registers.
- */
-
-static unsigned int init_chipset_via82cxxx(struct pci_dev *dev)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	struct via82cxxx_dev *vdev = host->host_priv;
-	struct via_isa_bridge *via_config = vdev->via_config;
-	u8 t, v;
-	u32 u;
-
-	/*
-	 * Detect cable and configure Clk66
-	 */
-	pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-
-	via_cable_detect(vdev, u);
-
-	if (via_config->udma_mask == ATA_UDMA4) {
-		/* Enable Clk66 */
-		pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
-	} else if (via_config->flags & VIA_BAD_CLK66) {
-		/* Would cause trouble on 596a and 686 */
-		pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
-	}
-
-	/*
-	 * Check whether interfaces are enabled.
-	 */
-
-	pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
-
-	/*
-	 * Set up FIFO sizes and thresholds.
-	 */
-
-	pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
-
-	/* Disable PREQ# till DDACK# */
-	if (via_config->flags & VIA_BAD_PREQ) {
-		/* Would crash on 586b rev 41 */
-		t &= 0x7f;
-	}
-
-	/* Fix FIFO split between channels */
-	if (via_config->flags & VIA_SET_FIFO) {
-		t &= (t & 0x9f);
-		switch (v & 3) {
-			case 2: t |= 0x00; break;	/* 16 on primary */
-			case 1: t |= 0x60; break;	/* 16 on secondary */
-			case 3: t |= 0x20; break;	/* 8 pri 8 sec */
-		}
-	}
-
-	pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
-
-	return 0;
-}
-
-/*
- *	Cable special cases
- */
-
-static const struct dmi_system_id cable_dmi_table[] = {
-	{
-		.ident = "Acer Ferrari 3400",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
-			DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
-		},
-	},
-	{ }
-};
-
-static int via_cable_override(struct pci_dev *pdev)
-{
-	/* Systems by DMI */
-	if (dmi_check_system(cable_dmi_table))
-		return 1;
-
-	/* Arima W730-K8/Targa Visionary 811/... */
-	if (pdev->subsystem_vendor == 0x161F &&
-	    pdev->subsystem_device == 0x2032)
-		return 1;
-
-	return 0;
-}
-
-static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	struct ide_host *host = pci_get_drvdata(pdev);
-	struct via82cxxx_dev *vdev = host->host_priv;
-
-	if (via_cable_override(pdev))
-		return ATA_CBL_PATA40_SHORT;
-
-	if ((vdev->via_80w >> hwif->channel) & 1)
-		return ATA_CBL_PATA80;
-	else
-		return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops via_port_ops = {
-	.set_pio_mode		= via_set_pio_mode,
-	.set_dma_mode		= via_set_drive,
-	.cable_detect		= via82cxxx_cable_detect,
-};
-
-static const struct ide_port_info via82cxxx_chipset __devinitdata = {
-	.name		= DRV_NAME,
-	.init_chipset	= init_chipset_via82cxxx,
-	.enablebits	= { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
-	.port_ops	= &via_port_ops,
-	.host_flags	= IDE_HFLAG_PIO_NO_BLACKLIST |
-			  IDE_HFLAG_POST_SET_MODE |
-			  IDE_HFLAG_IO_32BIT,
-	.pio_mask	= ATA_PIO5,
-	.swdma_mask	= ATA_SWDMA2,
-	.mwdma_mask	= ATA_MWDMA2,
-};
-
-static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	struct pci_dev *isa = NULL;
-	struct via_isa_bridge *via_config;
-	struct via82cxxx_dev *vdev;
-	int rc;
-	u8 idx = id->driver_data;
-	struct ide_port_info d;
-
-	d = via82cxxx_chipset;
-
-	/*
-	 * Find the ISA bridge and check we know what it is.
-	 */
-	via_config = via_config_find(&isa);
-	if (!via_config->id) {
-		printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
-			pci_name(dev));
-		return -ENODEV;
-	}
-
-	/*
-	 * Print the boot message.
-	 */
-	printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
-		pci_name(dev), via_config->name, isa->revision,
-		via_config->udma_mask ? "U" : "MW",
-		via_dma[via_config->udma_mask ?
-			(fls(via_config->udma_mask) - 1) : 0]);
-
-	pci_dev_put(isa);
-
-	/*
-	 * Determine system bus clock.
-	 */
-	via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
-	switch (via_clock) {
-	case 33000: via_clock = 33333; break;
-	case 37000: via_clock = 37500; break;
-	case 41000: via_clock = 41666; break;
-	}
-
-	if (via_clock < 20000 || via_clock > 50000) {
-		printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
-			"impossible (%d), using 33 MHz instead.\n", via_clock);
-		printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
-			"to assume 80-wire cable.\n");
-		via_clock = 33333;
-	}
-
-	if (idx == 0)
-		d.host_flags |= IDE_HFLAG_NO_AUTODMA;
-	else
-		d.enablebits[1].reg = d.enablebits[0].reg = 0;
-
-	if ((via_config->flags & VIA_NO_UNMASK) == 0)
-		d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
-
-#ifdef CONFIG_PPC_CHRP
-	if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos)
-		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
-#endif
-
-	d.udma_mask = via_config->udma_mask;
-
-	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
-	if (!vdev) {
-		printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
-			pci_name(dev));
-		return -ENOMEM;
-	}
-
-	vdev->via_config = via_config;
-
-	rc = ide_pci_init_one(dev, &d, vdev);
-	if (rc)
-		kfree(vdev);
-
-	return rc;
-}
-
-static void __devexit via_remove(struct pci_dev *dev)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	struct via82cxxx_dev *vdev = host->host_priv;
-
-	ide_pci_remove(dev);
-	kfree(vdev);
-}
-
-static const struct pci_device_id via_pci_tbl[] = {
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1),  0 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1),  0 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410),      1 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, via_pci_tbl);
-
-static struct pci_driver via_pci_driver = {
-	.name 		= "VIA_IDE",
-	.id_table 	= via_pci_tbl,
-	.probe 		= via_init_one,
-	.remove		= __devexit_p(via_remove),
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init via_ide_init(void)
-{
-	return ide_pci_register_driver(&via_pci_driver);
-}
-
-static void __exit via_ide_exit(void)
-{
-	pci_unregister_driver(&via_pci_driver);
-}
-
-module_init(via_ide_init);
-module_exit(via_ide_exit);
-
-MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for VIA IDE");
-MODULE_LICENSE("GPL");