diff options
author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-12-12 23:31:58 +0100 |
---|---|---|
committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-12-12 23:31:58 +0100 |
commit | 3ab7efe8e2cbcca2d401b43cfcc2fa9a7dac2299 (patch) | |
tree | 7ddbb4d5fdae6f61d23ef0ba2a43aaca23bd2195 /drivers/ide/ide-dma.c | |
parent | e11b9035a47da66fcd4bafd3a5f6b14f51ca667e (diff) |
ide: DMA reporting and validity checking fixes (take 3)
* ide_xfer_verbose() fixups:
- beautify returned mode names
- fix PIO5 reporting
- make it return 'const char *'
* Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode().
* Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid
DMA info in identify block.
* Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update().
As a result DMA won't be tuned or will be disabled after tuning if device
reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the
same checks while the IDE device is probed by ide-{cd,disk} device driver).
* Remove no longer needed ide_dma_verbose().
This patch should fix the following problem with out-of-sync IDE messages
reported by Nick Warne:
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd:
skipping word 93 validity check
, UDMA(66)
and later debugged by Mark Lord to be caused by:
ide_dma_verbose()
printk( ... "2048kB Cache");
eighty_ninty_three()
printk(KERN_DEBUG "%s: skipping word 93 validity check\n");
ide_dma_verbose()
printk(", UDMA(66)"
Please note that as a result ide-{cd,disk} device drivers won't report the
DMA speed used but this is intended since now DMA mode being used is always
reported by IDE core code.
v2:
* fixes suggested by Randy:
- use KERN_CONT for printk()-s in ide-{cd,disk}.c
- don't remove argument name from ide_xfer_verbose() declaration
v3:
* Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug()
(spotted by Sergei).
* "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei).
* Fix ide_find_dma_mode() to report the correct mode ('mode' after being
limited by 'req_mode').
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Nick Warne <nick@ukfsn.org>
Cc: Mark Lord <lkml@rtr.ca>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/ide-dma.c')
-rw-r--r-- | drivers/ide/ide-dma.c | 60 |
1 files changed, 15 insertions, 45 deletions
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 0d795a1678c7..6879aaae544d 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -753,10 +753,12 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) mode = XFER_MW_DMA_1; } - printk(KERN_DEBUG "%s: %s mode selected\n", drive->name, + mode = min(mode, req_mode); + + printk(KERN_INFO "%s: %s mode selected\n", drive->name, mode ? ide_xfer_verbose(mode) : "no DMA"); - return min(mode, req_mode); + return mode; } EXPORT_SYMBOL_GPL(ide_find_dma_mode); @@ -772,6 +774,9 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; + if (ide_id_dma_bug(drive)) + return 0; + if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -806,58 +811,23 @@ static int ide_dma_check(ide_drive_t *drive) return vdma ? 0 : -1; } -void ide_dma_verbose(ide_drive_t *drive) +int ide_id_dma_bug(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; - ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; if (id->field_valid & 4) { if ((id->dma_ultra >> 8) && (id->dma_mword >> 8)) - goto bug_dma_off; - if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) { - if (((id->dma_ultra >> 11) & 0x1F) && - eighty_ninty_three(drive)) { - if ((id->dma_ultra >> 15) & 1) { - printk(", UDMA(mode 7)"); - } else if ((id->dma_ultra >> 14) & 1) { - printk(", UDMA(133)"); - } else if ((id->dma_ultra >> 13) & 1) { - printk(", UDMA(100)"); - } else if ((id->dma_ultra >> 12) & 1) { - printk(", UDMA(66)"); - } else if ((id->dma_ultra >> 11) & 1) { - printk(", UDMA(44)"); - } else - goto mode_two; - } else { - mode_two: - if ((id->dma_ultra >> 10) & 1) { - printk(", UDMA(33)"); - } else if ((id->dma_ultra >> 9) & 1) { - printk(", UDMA(25)"); - } else if ((id->dma_ultra >> 8) & 1) { - printk(", UDMA(16)"); - } - } - } else { - printk(", (U)DMA"); /* Can be BIOS-enabled! */ - } + goto err_out; } else if (id->field_valid & 2) { if ((id->dma_mword >> 8) && (id->dma_1word >> 8)) - goto bug_dma_off; - printk(", DMA"); - } else if (id->field_valid & 1) { - goto bug_dma_off; + goto err_out; } - return; -bug_dma_off: - printk(", BUG DMA OFF"); - hwif->dma_off_quietly(drive); - return; + return 0; +err_out: + printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); + return 1; } -EXPORT_SYMBOL(ide_dma_verbose); - int ide_set_dma(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; |