Merge branch 'master' into for-next

Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.

1 files changed, 174 insertions, 33 deletions

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 1d840aa83782..cdbc7448491e 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -165,10 +165,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_VID_CTRL		0x6A
 
+#define W83795_REG_ALARM_CTRL		0x40
+#define ALARM_CTRL_RTSACS		(1 << 7)
 #define W83795_REG_ALARM(index)		(0x41 + (index))
+#define W83795_REG_CLR_CHASSIS		0x4D
 #define W83795_REG_BEEP(index)		(0x50 + (index))
 
-#define W83795_REG_CLR_CHASSIS		0x4D
+#define W83795_REG_OVT_CFG		0x58
+#define OVT_CFG_SEL			(1 << 7)
 
 
 #define W83795_REG_FCMS1		0x201
@@ -178,6 +182,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_TSS(index)		(0x209 + (index))
 
+#define TSS_MAP_RESERVED		0xff
+static const u8 tss_map[4][6] = {
+	{ 0,  1,  2,  3,  4,  5},
+	{ 6,  7,  8,  9,  0,  1},
+	{10, 11, 12, 13,  2,  3},
+	{ 4,  5,  4,  5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
 #define PWM_OUTPUT			0
 #define PWM_FREQ			1
 #define PWM_START			2
@@ -369,6 +381,7 @@ struct w83795_data {
 	u8 setup_pwm[3];	/* Register value */
 
 	u8 alarms[6];		/* Register value */
+	u8 enable_beep;
 	u8 beeps[6];		/* Register value */
 
 	char valid;
@@ -499,8 +512,11 @@ static void w83795_update_limits(struct i2c_client *client)
 	}
 
 	/* Read beep settings */
-	for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
-		data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+			data->beeps[i] =
+				w83795_read(client, W83795_REG_BEEP(i));
+	}
 
 	data->valid_limits = 1;
 }
@@ -577,6 +593,7 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83795_data *data = i2c_get_clientdata(client);
 	u16 tmp;
+	u8 intrusion;
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -648,9 +665,24 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
 	}
 
-	/* update alarm */
+	/* Update intrusion and alarms
+	 * It is important to read intrusion first, because reading from
+	 * register SMI STS6 clears the interrupt status temporarily. */
+	tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+	/* Switch to interrupt status for intrusion if needed */
+	if (tmp & ALARM_CTRL_RTSACS)
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
+	intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+	/* Switch to real-time alarms */
+	w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
 	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
 		data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+	data->alarms[5] |= intrusion;
+	/* Restore original configuration if needed */
+	if (!(tmp & ALARM_CTRL_RTSACS))
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
 
 	data->last_updated = jiffies;
 	data->valid = 1;
@@ -730,6 +762,10 @@ store_chassis_clear(struct device *dev,
 	val = w83795_read(client, W83795_REG_CLR_CHASSIS);
 	val |= 0x80;
 	w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+	/* Clear status and force cache refresh */
+	w83795_read(client, W83795_REG_ALARM(5));
+	data->valid = 0;
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -857,20 +893,20 @@ show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
 	int index = sensor_attr->index;
 	u8 tmp;
 
-	if (1 == (data->pwm_fcms[0] & (1 << index))) {
+	/* Speed cruise mode */
+	if (data->pwm_fcms[0] & (1 << index)) {
 		tmp = 2;
 		goto out;
 	}
+	/* Thermal cruise or SmartFan IV mode */
 	for (tmp = 0; tmp < 6; tmp++) {
 		if (data->pwm_tfmr[tmp] & (1 << index)) {
 			tmp = 3;
 			goto out;
 		}
 	}
-	if (data->pwm_fomc & (1 << index))
-		tmp = 0;
-	else
-		tmp = 1;
+	/* Manual mode */
+	tmp = 1;
 
 out:
 	return sprintf(buf, "%u\n", tmp);
@@ -890,23 +926,21 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 
 	if (strict_strtoul(buf, 10, &val) < 0)
 		return -EINVAL;
-	if (val > 2)
+	if (val < 1 || val > 2)
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	switch (val) {
-	case 0:
 	case 1:
+		/* Clear speed cruise mode bits */
 		data->pwm_fcms[0] &= ~(1 << index);
 		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		/* Clear thermal cruise mode bits */
 		for (i = 0; i < 6; i++) {
 			data->pwm_tfmr[i] &= ~(1 << index);
 			w83795_write(client, W83795_REG_TFMR(i),
 				data->pwm_tfmr[i]);
 		}
-		data->pwm_fomc |= 1 << index;
-		data->pwm_fomc ^= val << index;
-		w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
 		break;
 	case 2:
 		data->pwm_fcms[0] |= (1 << index);
@@ -918,23 +952,60 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = to_sensor_dev_attr_2(attr)->index;
+	unsigned int mode;
+
+	if (data->pwm_fomc & (1 << index))
+		mode = 0;	/* DC */
+	else
+		mode = 1;	/* PWM */
+
+	return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+	int useful = 0, i;
+
+	for (i = 0; i < 4; i++) {
+		if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+			continue;
+		if (tss_map[i][tsrc] < 6)	/* Analog */
+			useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+		else				/* Digital */
+			useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+	}
+
+	return useful;
+}
+
+static ssize_t
 show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	struct w83795_data *data = w83795_update_pwm_config(dev);
 	int index = sensor_attr->index;
-	u8 val = index / 2;
-	u8 tmp = data->temp_src[val];
+	u8 tmp = data->temp_src[index / 2];
 
 	if (index & 1)
-		val = 4;
+		tmp >>= 4;	/* Pick high nibble */
 	else
-		val = 0;
-	tmp >>= val;
-	tmp &= 0x0f;
+		tmp &= 0x0f;	/* Pick low nibble */
 
-	return sprintf(buf, "%u\n", tmp);
+	/* Look-up the actual temperature channel number */
+	if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+		return -EINVAL;		/* Shouldn't happen */
+
+	return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
 }
 
 static ssize_t
@@ -946,12 +1017,21 @@ store_temp_src(struct device *dev, struct device_attribute *attr,
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	int index = sensor_attr->index;
-	unsigned long tmp;
+	int tmp;
+	unsigned long channel;
 	u8 val = index / 2;
 
-	if (strict_strtoul(buf, 10, &tmp) < 0)
+	if (strict_strtoul(buf, 10, &channel) < 0 ||
+	    channel < 1 || channel > 14)
+		return -EINVAL;
+
+	/* Check if request can be fulfilled */
+	for (tmp = 0; tmp < 4; tmp++) {
+		if (tss_map[tmp][index] == channel - 1)
+			break;
+	}
+	if (tmp == 4)	/* No match */
 		return -EINVAL;
-	tmp = SENSORS_LIMIT(tmp, 0, 15);
 
 	mutex_lock(&data->update_lock);
 	if (index & 1) {
@@ -1515,7 +1595,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 
 #define NOT_USED			-1
 
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
  * somewhere else in the code */
 #define SENSOR_ATTR_IN(index) {						\
 	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
@@ -1530,6 +1610,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + ((index > 14) ? 1 : 0)) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_FAN(index) {					\
 	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
 		NULL, FAN_INPUT, index - 1), \
@@ -1553,9 +1635,13 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_pwm, store_pwm, PWM_FREQ, index - 1),	 \
 	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
 		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
+		show_pwm_mode, NULL, NOT_USED, index - 1),		\
 	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
 		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_DTS(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
 		show_dts_mode, NULL, NOT_USED, index - 7),	\
@@ -1574,6 +1660,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_TEMP(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
@@ -1593,8 +1681,6 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + (index > 4 ? 11 : 17)),				\
-	SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO,	\
-		show_temp_src, store_temp_src, NOT_USED, index - 1),	\
 	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
 		show_temp_pwm_enable, store_temp_pwm_enable,		\
 		TEMP_PWM_ENABLE, index - 1),				\
@@ -1680,7 +1766,7 @@ static const struct sensor_device_attribute_2 w83795_fan[][4] = {
 	SENSOR_ATTR_FAN(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
 	SENSOR_ATTR_TEMP(1),
 	SENSOR_ATTR_TEMP(2),
 	SENSOR_ATTR_TEMP(3),
@@ -1700,7 +1786,7 @@ static const struct sensor_device_attribute_2 w83795_dts[][8] = {
 	SENSOR_ATTR_DTS(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
 	SENSOR_ATTR_PWM(1),
 	SENSOR_ATTR_PWM(2),
 	SENSOR_ATTR_PWM(3),
@@ -1711,13 +1797,24 @@ static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
 	SENSOR_ATTR_PWM(8),
 };
 
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+	SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 0),
+	SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 1),
+	SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 2),
+	SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 3),
+	SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 4),
+	SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
 static const struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 46),
-	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 46),
-	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 47),
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
 		store_fanin, FANIN_TOL, NOT_USED),
@@ -1730,6 +1827,13 @@ static const struct sensor_device_attribute_2 sda_single_files[] = {
 #endif
 };
 
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 46),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 47),
+};
+
 /*
  * Driver interface
  */
@@ -1859,6 +1963,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_in & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+			if (j == 4 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_in[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1869,18 +1975,37 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_fan & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+			if (j == 3 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_fan[i][j].dev_attr);
 			if (err)
 				return err;
 		}
 	}
 
+	for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+		j = w83795_tss_useful(data, i);
+		if (!j)
+			continue;
+		err = fn(dev, &w83795_tss[i].dev_attr);
+		if (err)
+			return err;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
 		err = fn(dev, &sda_single_files[i].dev_attr);
 		if (err)
 			return err;
 	}
 
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+			err = fn(dev, &sda_beep_files[i].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	for (i = 0; i < data->has_pwm; i++) {
 		for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
@@ -1899,6 +2024,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 #else
 		for (j = 0; j < 8; j++) {
 #endif
+			if (j == 7 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_temp[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1910,6 +2037,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 			if (!(data->has_dts & (1 << i)))
 				continue;
 			for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+				if (j == 7 && !data->enable_beep)
+					continue;
 				err = fn(dev, &w83795_dts[i][j].dev_attr);
 				if (err)
 					return err;
@@ -2049,6 +2178,18 @@ static int w83795_probe(struct i2c_client *client,
 	else
 		data->has_pwm = 2;
 
+	/* Check if BEEP pin is available */
+	if (data->chip_type == w83795g) {
+		/* The W83795G has a dedicated BEEP pin */
+		data->enable_beep = 1;
+	} else {
+		/* The W83795ADG has a shared pin for OVT# and BEEP, so you
+		 * can't have both */
+		tmp = w83795_read(client, W83795_REG_OVT_CFG);
+		if ((tmp & OVT_CFG_SEL) == 0)
+			data->enable_beep = 1;
+	}
+
 	err = w83795_handle_files(dev, device_create_file);
 	if (err)
 		goto exit_remove;