diff options
author | Viresh Kumar <viresh.kumar@linaro.org> | 2013-08-14 19:38:24 +0530 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2013-10-31 00:11:08 +0100 |
commit | d4019f0a92ab802f385cc9c8ad3ab7b5449712cb (patch) | |
tree | ebd06695585e457ae1bf219653452b111e7508db /drivers/cpufreq/omap-cpufreq.c | |
parent | 7dbf694db6ac7c759599316d50d7050efcbd512a (diff) |
cpufreq: move freq change notifications to cpufreq core
Most of the drivers do following in their ->target_index() routines:
struct cpufreq_freqs freqs;
freqs.old = old freq...
freqs.new = new freq...
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
/* Change rate here */
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.
There are few special cases though, like exynos5440, which doesn't do everything
on the call to ->target_index() routine and call some kind of bottom halves for
doing this work, work/tasklet/etc..
They may continue doing notification from their own code as flag:
CPUFREQ_ASYNC_NOTIFICATION is already set for them.
All drivers are also modified in this patch to avoid breaking 'git bisect', as
double notification would happen otherwise.
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq/omap-cpufreq.c')
-rw-r--r-- | drivers/cpufreq/omap-cpufreq.c | 38 |
1 files changed, 13 insertions, 25 deletions
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index b5512712298f..be6d14307aa8 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -53,15 +53,14 @@ static unsigned int omap_getspeed(unsigned int cpu) static int omap_target(struct cpufreq_policy *policy, unsigned int index) { - int r, ret = 0; - struct cpufreq_freqs freqs; struct dev_pm_opp *opp; unsigned long freq, volt = 0, volt_old = 0, tol = 0; + unsigned int old_freq, new_freq; - freqs.old = omap_getspeed(policy->cpu); - freqs.new = freq_table[index].frequency; + old_freq = omap_getspeed(policy->cpu); + new_freq = freq_table[index].frequency; - freq = freqs.new * 1000; + freq = new_freq * 1000; ret = clk_round_rate(mpu_clk, freq); if (IS_ERR_VALUE(ret)) { dev_warn(mpu_dev, @@ -77,7 +76,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index) if (IS_ERR(opp)) { rcu_read_unlock(); dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", - __func__, freqs.new); + __func__, new_freq); return -EINVAL; } volt = dev_pm_opp_get_voltage(opp); @@ -87,43 +86,32 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index) } dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n", - freqs.old / 1000, volt_old ? volt_old / 1000 : -1, - freqs.new / 1000, volt ? volt / 1000 : -1); - - /* notifiers */ - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + old_freq / 1000, volt_old ? volt_old / 1000 : -1, + new_freq / 1000, volt ? volt / 1000 : -1); /* scaling up? scale voltage before frequency */ - if (mpu_reg && (freqs.new > freqs.old)) { + if (mpu_reg && (new_freq > old_freq)) { r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); if (r < 0) { dev_warn(mpu_dev, "%s: unable to scale voltage up.\n", __func__); - freqs.new = freqs.old; - goto done; + return r; } } - ret = clk_set_rate(mpu_clk, freqs.new * 1000); + ret = clk_set_rate(mpu_clk, new_freq * 1000); /* scaling down? scale voltage after frequency */ - if (mpu_reg && (freqs.new < freqs.old)) { + if (mpu_reg && (new_freq < old_freq)) { r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); if (r < 0) { dev_warn(mpu_dev, "%s: unable to scale voltage down.\n", __func__); - ret = clk_set_rate(mpu_clk, freqs.old * 1000); - freqs.new = freqs.old; - goto done; + clk_set_rate(mpu_clk, old_freq * 1000); + return r; } } - freqs.new = omap_getspeed(policy->cpu); - -done: - /* notifiers */ - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return ret; } |