diff options
author | Sonic Zhang <sonic.zhang@analog.com> | 2012-01-04 14:06:51 +0800 |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2012-01-17 20:49:28 -0500 |
commit | 81b0287d341535ac722de891b19f7c49212ac91c (patch) | |
tree | 72c3b28073c3b021061f87e29aafddaaf9d3650b /drivers/ata | |
parent | 93272b132a72450dfc16f13d32223fe47aaf5061 (diff) |
[libata] pata_bf54x: Support sg list in bmdma transfer.
BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered
in one ATAPI transfer. So, set the max sg_tablesize to 4.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/pata_bf54x.c | 167 |
1 files changed, 88 insertions, 79 deletions
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index d6a4677fdf71..1e65842e2ca7 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -251,6 +251,8 @@ static const u32 udma_tenvmin = 20; static const u32 udma_tackmin = 20; static const u32 udma_tssmin = 50; +#define BFIN_MAX_SG_SEGMENTS 4 + /** * * Function: num_clocks_min @@ -829,79 +831,61 @@ static void bfin_set_devctl(struct ata_port *ap, u8 ctl) static void bfin_bmdma_setup(struct ata_queued_cmd *qc) { - unsigned short config = WDSIZE_16; + struct ata_port *ap = qc->ap; + struct dma_desc_array *dma_desc_cpu = (struct dma_desc_array *)ap->bmdma_prd; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned short config = DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_16 | DMAEN; struct scatterlist *sg; unsigned int si; + unsigned int channel; + unsigned int dir; + unsigned int size = 0; dev_dbg(qc->ap->dev, "in atapi dma setup\n"); /* Program the ATA_CTRL register with dir */ if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* fill the ATAPI DMA controller */ - set_dma_config(CH_ATAPI_TX, config); - set_dma_x_modify(CH_ATAPI_TX, 2); - for_each_sg(qc->sg, sg, qc->n_elem, si) { - set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg)); - set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1); - } + channel = CH_ATAPI_TX; + dir = DMA_TO_DEVICE; } else { + channel = CH_ATAPI_RX; + dir = DMA_FROM_DEVICE; config |= WNR; - /* fill the ATAPI DMA controller */ - set_dma_config(CH_ATAPI_RX, config); - set_dma_x_modify(CH_ATAPI_RX, 2); - for_each_sg(qc->sg, sg, qc->n_elem, si) { - set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg)); - set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1); - } } -} -/** - * bfin_bmdma_start - Start an IDE DMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_start(). - */ + dma_map_sg(ap->dev, qc->sg, qc->n_elem, dir); -static void bfin_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; - struct scatterlist *sg; - unsigned int si; + /* fill the ATAPI DMA controller */ + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_desc_cpu[si].start_addr = sg_dma_address(sg); + dma_desc_cpu[si].cfg = config; + dma_desc_cpu[si].x_count = sg_dma_len(sg) >> 1; + dma_desc_cpu[si].x_modify = 2; + size += sg_dma_len(sg); + } - dev_dbg(qc->ap->dev, "in atapi dma start\n"); - if (!(ap->udma_mask || ap->mwdma_mask)) - return; + /* Set the last descriptor to stop mode */ + dma_desc_cpu[qc->n_elem - 1].cfg &= ~(DMAFLOW | NDSIZE); - /* start ATAPI DMA controller*/ - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* - * On blackfin arch, uncacheable memory is not - * allocated with flag GFP_DMA. DMA buffer from - * common kenel code should be flushed if WB - * data cache is enabled. Otherwise, this loop - * is an empty loop and optimized out. - */ - for_each_sg(qc->sg, sg, qc->n_elem, si) { - flush_dcache_range(sg_dma_address(sg), - sg_dma_address(sg) + sg_dma_len(sg)); - } - enable_dma(CH_ATAPI_TX); - dev_dbg(qc->ap->dev, "enable udma write\n"); + flush_dcache_range((unsigned int)dma_desc_cpu, + (unsigned int)dma_desc_cpu + + qc->n_elem * sizeof(struct dma_desc_array)); - /* Send ATA DMA write command */ - bfin_exec_command(ap, &qc->tf); + /* Enable ATA DMA operation*/ + set_dma_curr_desc_addr(channel, (unsigned long *)ap->bmdma_prd_dma); + set_dma_x_count(channel, 0); + set_dma_x_modify(channel, 0); + set_dma_config(channel, config); + + SSYNC(); + + /* Send ATA DMA command */ + bfin_exec_command(ap, &qc->tf); + if (qc->tf.flags & ATA_TFLAG_WRITE) { /* set ATA DMA write direction */ ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR)); } else { - enable_dma(CH_ATAPI_RX); - dev_dbg(qc->ap->dev, "enable udma read\n"); - - /* Send ATA DMA read command */ - bfin_exec_command(ap, &qc->tf); - /* set ATA DMA read direction */ ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR)); @@ -913,12 +897,28 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) /* Set ATAPI state machine contorl in terminate sequence */ ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM); - /* Set transfer length to buffer len */ - for_each_sg(qc->sg, sg, qc->n_elem, si) { - ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1)); - } + /* Set transfer length to the total size of sg buffers */ + ATAPI_SET_XFER_LEN(base, size >> 1); +} - /* Enable ATA DMA operation*/ +/** + * bfin_bmdma_start - Start an IDE DMA transaction + * @qc: Info associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_start(). + */ + +static void bfin_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + dev_dbg(qc->ap->dev, "in atapi dma start\n"); + + if (!(ap->udma_mask || ap->mwdma_mask)) + return; + + /* start ATAPI transfer*/ if (ap->udma_mask) ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | ULTRA_START); @@ -935,34 +935,23 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) static void bfin_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int si; + unsigned int dir; dev_dbg(qc->ap->dev, "in atapi dma stop\n"); + if (!(ap->udma_mask || ap->mwdma_mask)) return; /* stop ATAPI DMA controller*/ - if (qc->tf.flags & ATA_TFLAG_WRITE) + if (qc->tf.flags & ATA_TFLAG_WRITE) { + dir = DMA_TO_DEVICE; disable_dma(CH_ATAPI_TX); - else { + } else { + dir = DMA_FROM_DEVICE; disable_dma(CH_ATAPI_RX); - if (ap->hsm_task_state & HSM_ST_LAST) { - /* - * On blackfin arch, uncacheable memory is not - * allocated with flag GFP_DMA. DMA buffer from - * common kenel code should be invalidated if - * data cache is enabled. Otherwise, this loop - * is an empty loop and optimized out. - */ - for_each_sg(qc->sg, sg, qc->n_elem, si) { - invalidate_dcache_range( - sg_dma_address(sg), - sg_dma_address(sg) - + sg_dma_len(sg)); - } - } } + + dma_unmap_sg(ap->dev, qc->sg, qc->n_elem, dir); } /** @@ -1260,6 +1249,11 @@ static void bfin_port_stop(struct ata_port *ap) { dev_dbg(ap->dev, "in atapi port stop\n"); if (ap->udma_mask != 0 || ap->mwdma_mask != 0) { + dma_free_coherent(ap->dev, + BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), + ap->bmdma_prd, + ap->bmdma_prd_dma); + free_dma(CH_ATAPI_RX); free_dma(CH_ATAPI_TX); } @@ -1271,14 +1265,29 @@ static int bfin_port_start(struct ata_port *ap) if (!(ap->udma_mask || ap->mwdma_mask)) return 0; + ap->bmdma_prd = dma_alloc_coherent(ap->dev, + BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), + &ap->bmdma_prd_dma, + GFP_KERNEL); + + if (ap->bmdma_prd == NULL) { + dev_info(ap->dev, "Unable to allocate DMA descriptor array.\n"); + goto out; + } + if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) { if (request_dma(CH_ATAPI_TX, "BFIN ATAPI TX DMA") >= 0) return 0; free_dma(CH_ATAPI_RX); + dma_free_coherent(ap->dev, + BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array), + ap->bmdma_prd, + ap->bmdma_prd_dma); } +out: ap->udma_mask = 0; ap->mwdma_mask = 0; dev_err(ap->dev, "Unable to request ATAPI DMA!" @@ -1400,7 +1409,7 @@ static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance) static struct scsi_host_template bfin_sht = { ATA_BASE_SHT(DRV_NAME), - .sg_tablesize = SG_NONE, + .sg_tablesize = BFIN_MAX_SG_SEGMENTS, .dma_boundary = ATA_DMA_BOUNDARY, }; |