summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-11-17 14:06:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2022-11-17 14:06:25 -0800
commit84368d882b9688bfac77ce48d33b1e20a4e4a787 (patch)
tree2b522860c6a9ee8956630757c9628af62930e756 /arch
parentae75334011d3c9f8b859ecb5f63e17e72023051e (diff)
parent0d6a10dc2b971cc3a192b47721ee8270afc2d104 (diff)
Merge tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann: "Another set of devicetree and code changes for SoC platforms, notably: - DT schema warning fixes for i.MX - Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP - MAINTAINERS updates for Hisilicon and RISC-V, documenting which RISC-V SoC specific patches will now get merged through the SoC tree in the future. - A code fix for at91 suspend, to work around broken hardware - A devicetree fix for lan966x/pcb8291 LED support - Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems like incorrect register sizes and schema warnings. One fix makes the UFS controller work on sc8280xp, and six fixes address the same regulator problem in a variety of platforms" * tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) MAINTAINERS: repair Microchip corei2c driver entry MAINTAINERS: add an entry for StarFive devicetrees MAINTAINERS: generify the Microchip RISC-V entry name MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees MAINTAINERS: git://github.com -> https://github.com for HiSilicon soc: imx8m: Enable OCOTP clock before reading the register arm64: dts: imx93-pinfunc: drop execution permission arm64: dts: imx8mn: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR ARM: at91: pm: avoid soft resetting AC DLL ARM: dts: lan966x: Enable sgpio on pcb8291 arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state ARM: dts: at91: sama7g5: fix signal name of pin PB2 arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280 arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi4
-rw-r--r--arch/arm/boot/dts/lan966x-pcb8291.dts20
-rw-r--r--arch/arm/boot/dts/sama7g5-pinfunc.h2
-rw-r--r--arch/arm/mach-at91/pm_suspend.S7
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts32
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm.dtsi4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn.dtsi2
-rw-r--r--[-rwxr-xr-x]arch/arm64/boot/dts/freescale/imx93-pinfunc.h0
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/sa8155p-adp.dts13
-rw-r--r--arch/arm64/boot/dts/qcom/sa8295p-adp.dts12
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280.dtsi3
-rw-r--r--arch/arm64/boot/dts/qcom/sc8280xp-crd.dts6
-rw-r--r--arch/arm64/boot/dts/qcom/sc8280xp.dtsi36
-rw-r--r--arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi6
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi6
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350-hdk.dts12
19 files changed, 125 insertions, 45 deletions
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 0fc9e6b8b05d..03d2e8544a4e 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1270,10 +1270,10 @@
clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
};
- gpmi: nand-controller@33002000{
+ gpmi: nand-controller@33002000 {
compatible = "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index f4f054cdf2a8..3a3d76af8612 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -69,6 +69,12 @@
pins = "GPIO_35", "GPIO_36";
function = "can0_b";
};
+
+ sgpio_a_pins: sgpio-a-pins {
+ /* SCK, D0, D1, LD */
+ pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+ function = "sgpio_a";
+ };
};
&can0 {
@@ -118,6 +124,20 @@
status = "okay";
};
+&sgpio {
+ pinctrl-0 = <&sgpio_a_pins>;
+ pinctrl-names = "default";
+ microchip,sgpio-port-ranges = <0 3>, <8 11>;
+ status = "okay";
+
+ gpio@0 {
+ ngpios = <64>;
+ };
+ gpio@1 {
+ ngpios = <64>;
+ };
+};
+
&switch {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h
index 4eb30445d205..6e87f0d4b8fc 100644
--- a/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -261,7 +261,7 @@
#define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1)
#define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1)
#define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB2, 6, 3)
#define PIN_PB3 35
#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0)
#define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1)
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index ffed4d949042..e4904faf1753 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -169,10 +169,15 @@ sr_ena_2:
cmp tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
bne sr_ena_2
- /* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+ /* Disable DX DLLs for non-backup modes. */
cmp r7, #AT91_PM_BACKUP
beq sr_ena_3
+ /* Do not soft reset the AC DLL. */
+ ldr tmp1, [r3, DDR3PHY_ACDLLCR]
+ bic tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+ str tmp1, [r3, DDR3PHY_ACDLLCR]
+
/* Disable DX DLLs. */
ldr tmp1, [r3, #DDR3PHY_DX0DLLCR]
orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 7e0aeb2db305..a0aeac619929 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -34,11 +34,25 @@
off-on-delay-us = <12000>;
};
- extcon_usbotg1: extcon-usbotg1 {
- compatible = "linux,extcon-usb-gpio";
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ label = "X19";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1_extcon>;
- id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pinctrl_usb1_connector>;
+ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+ };
};
};
@@ -105,13 +119,19 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1>;
dr_mode = "otg";
- extcon = <&extcon_usbotg1>;
srp-disable;
hnp-disable;
adp-disable;
power-active-high;
over-current-active-low;
+ usb-role-switch;
status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
+ };
};
&usbotg2 {
@@ -231,7 +251,7 @@
<MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>;
};
- pinctrl_usb1_extcon: usb1-extcongrp {
+ pinctrl_usb1_connector: usb1-connectorgrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index dabd94dc30c4..50ef92915c67 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1244,10 +1244,10 @@
clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
};
- gpmi: nand-controller@33002000{
+ gpmi: nand-controller@33002000 {
compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ad0b99adf691..67b554ba690c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1102,7 +1102,7 @@
gpmi: nand-controller@33002000 {
compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
index 4298a145f8a9..4298a145f8a9 100755..100644
--- a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a47acf9bdf24..a721cdd80489 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -668,7 +668,7 @@
apcs_glb: mailbox@b111000 {
compatible = "qcom,ipq8074-apcs-apps-global";
- reg = <0x0b111000 0x6000>;
+ reg = <0x0b111000 0x1000>;
#clock-cells = <1>;
#mbox-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c0a2baffa49d..aba717644391 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3504,7 +3504,7 @@
};
saw3: syscon@9a10000 {
- compatible = "qcom,tcsr-msm8996", "syscon";
+ compatible = "syscon";
reg = <0x09a10000 0x1000>;
};
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 87ab0e1ecd16..4dee790f1049 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -43,7 +43,6 @@
regulator-always-on;
regulator-boot-on;
- regulator-allow-set-load;
vin-supply = <&vreg_3p3>;
};
@@ -137,6 +136,9 @@
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
@@ -152,6 +154,9 @@
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_0p8: ldo11 {
@@ -258,6 +263,9 @@
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_1p8: ldo7 {
@@ -273,6 +281,9 @@
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index b608b82dff03..2c62ba6a49c5 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -83,6 +83,9 @@
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
@@ -98,6 +101,9 @@
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
@@ -113,6 +119,9 @@
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17c: ldo17 {
@@ -121,6 +130,9 @@
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 212580316d3e..4cdc88d33944 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2296,7 +2296,8 @@
lpass_audiocc: clock-controller@3300000 {
compatible = "qcom,sc7280-lpassaudiocc";
- reg = <0 0x03300000 0 0x30000>;
+ reg = <0 0x03300000 0 0x30000>,
+ <0 0x032a9000 0 0x1000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index fea7d8273ccd..5e30349efd20 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -124,6 +124,9 @@
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c: ldo13 {
@@ -146,6 +149,9 @@
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4d: ldo4 {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index c32bcded2aef..212d63d5cbf2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -885,13 +885,13 @@
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sc8280xp-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0xe10>;
+ reg = <0 0x01d87000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clock-names = "ref",
"ref_aux";
- clocks = <&rpmhcc RPMH_CXO_CLK>,
+ clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
resets = <&ufs_mem_hc 0>;
@@ -953,13 +953,13 @@
ufs_card_phy: phy@1da7000 {
compatible = "qcom,sc8280xp-qmp-ufs-phy";
- reg = <0 0x01da7000 0 0xe10>;
+ reg = <0 0x01da7000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clock-names = "ref",
"ref_aux";
- clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
+ clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
<&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
resets = <&ufs_card_hc 0>;
@@ -1181,26 +1181,16 @@
usb_0_ssphy: usb3-phy@88eb400 {
reg = <0 0x088eb400 0 0x100>,
<0 0x088eb600 0 0x3ec>,
- <0 0x088ec400 0 0x1f0>,
+ <0 0x088ec400 0 0x364>,
<0 0x088eba00 0 0x100>,
<0 0x088ebc00 0 0x3ec>,
- <0 0x088ec700 0 0x64>;
+ <0 0x088ec200 0 0x18>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb0_phy_pipe_clk_src";
};
-
- usb_0_dpphy: dp-phy@88ed200 {
- reg = <0 0x088ed200 0 0x200>,
- <0 0x088ed400 0 0x200>,
- <0 0x088eda00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
};
usb_1_hsphy: phy@8902000 {
@@ -1242,8 +1232,8 @@
usb_1_ssphy: usb3-phy@8903400 {
reg = <0 0x08903400 0 0x100>,
- <0 0x08903c00 0 0x3ec>,
- <0 0x08904400 0 0x1f0>,
+ <0 0x08903600 0 0x3ec>,
+ <0 0x08904400 0 0x364>,
<0 0x08903a00 0 0x100>,
<0 0x08903c00 0 0x3ec>,
<0 0x08904200 0 0x18>;
@@ -1253,16 +1243,6 @@
clock-names = "pipe0";
clock-output-names = "usb1_phy_pipe_clk_src";
};
-
- usb_1_dpphy: dp-phy@8904200 {
- reg = <0 0x08904200 0 0x200>,
- <0 0x08904400 0 0x200>,
- <0 0x08904a00 0 0x200>,
- <0 0x08904600 0 0x200>,
- <0 0x08904800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
};
system-cache-controller@9200000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index 014fe3a31548..fb6e5a140c9f 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,6 +348,9 @@
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
@@ -367,6 +370,9 @@
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 549e0a2aa9fe..5428aab3058d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,6 +317,9 @@
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_2p85: ldo7 {
@@ -339,6 +342,9 @@
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a5b62cadb129..e276eed1f8e2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -334,6 +334,7 @@
exit-latency-us = <6562>;
min-residency-us = <9987>;
local-timer-stop;
+ status = "disabled";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 0fcf5bd88fc7..69ae6503c2f6 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -107,6 +107,9 @@
regulator-max-microvolt = <888000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p2: ldo6 {
@@ -115,6 +118,9 @@
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p96: ldo7 {
@@ -123,6 +129,9 @@
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
@@ -131,6 +140,9 @@
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
+ regulator-allowed-modes =
+ <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
};