Merge tag 'mips_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:
 "Just cleanups and fixes"

* tag 'mips_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: vpe-mt: drop physical_memsize
  mips: fix syscall_get_nr
  MIPS: SMP-CPS: fix build error when HOTPLUG_CPU not set
  MIPS: DTS: jz4780: add #clock-cells to rtc_dev
  MIPS: dts: Boston: Fix dtc 'pci_device_reg' warning
  mips: dts: ralink: mt7621: add port@5 as CPU port
  mips: dts: align LED node names with dtschema
  MIPS: ralink: Use devm_platform_get_and_ioremap_resource()
  MIPS: pci-mt7620: Use devm_platform_get_and_ioremap_resource()
  MIPS: pci: lantiq: Use devm_platform_get_and_ioremap_resource()
  MIPS: lantiq: xway: Use devm_platform_get_and_ioremap_resource()
  MIPS: BCM47XX: Add support for Linksys E2500 V3
  mips: ralink: make SOC_MT7621 select PINCTRL_MT7621 and fix help section
  MIPS: DTS: CI20: fix otg power gpio
  MIPS: dts: lantiq: Remove bogus interrupt-parent; line
  MIPS: Fix a compilation issue
  MIPS: remove CONFIG_MIPS_LD_CAN_LINK_VDSO
  mips: Realtek RTL: select NO_EXCEPT_FILL
  MIPS: OCTEON: octeon-usb: Consolidate error messages

35 files changed, 136 insertions, 144 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 15cb692b0a09..37072e15b263 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -445,6 +445,7 @@ config LANTIQ
 	select IRQ_MIPS_CPU
 	select CEVT_R4K
 	select CSRC_R4K
+	select NO_EXCEPT_FILL
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index 8ef002471b9c..90fb48b046c0 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -130,6 +130,7 @@ struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
 	{{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
 	{{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
 	{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E2500V3, "Linksys E2500 V3"}, "E2500", "1.0"},
 	/* like WRT610N v2.0 */
 	{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
index 38e4a9cbcf4e..437a737c01dd 100644
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -223,6 +223,12 @@ bcm47xx_buttons_linksys_e2000v1[] __initconst = {
 };
 
 static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e2500v3[] __initconst = {
+	BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(10, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
 bcm47xx_buttons_linksys_e3000v1[] __initconst = {
 	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
@@ -617,6 +623,9 @@ int __init bcm47xx_buttons_register(void)
 	case BCM47XX_BOARD_LINKSYS_E2000V1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1);
 		break;
+	case BCM47XX_BOARD_LINKSYS_E2500V3:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2500v3);
+		break;
 	case BCM47XX_BOARD_LINKSYS_E3000V1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1);
 		break;
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
index 2fdb4baad19c..cb460eaf8835 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -20,27 +20,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb1 {
+		led-usb1 {
 			label = "usb1";
 			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "usb2";
 			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			label = "wps";
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "5g";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless2 {
+		led-wireless2 {
 			label = "2.4g";
 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
index e04237281b41..c55845fd84ca 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
@@ -21,15 +21,15 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "2.4g";
 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
index 84328afa3a55..72f7605d2e31 100644
--- a/arch/mips/boot/dts/img/boston.dts
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -125,7 +125,7 @@
 			#interrupt-cells = <1>;
 		};
 
-		pci2_root@0,0,0 {
+		pci2_root@0,0 {
 			compatible = "pci10ee,7021";
 			reg = <0x00000000 0 0 0 0>;
 
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index f38c39572a9e..239c4537484d 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -42,25 +42,25 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led0 {
+		led-0 {
 			label = "ci20:red:led0";
 			gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
-		led1 {
+		led-1 {
 			label = "ci20:red:led1";
 			gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		led2 {
+		led-2 {
 			label = "ci20:red:led2";
 			gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu1";
 		};
 
-		led3 {
+		led-3 {
 			label = "ci20:red:led3";
 			gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
@@ -113,7 +113,7 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
-		gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
+		gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
 };
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index c182a656d63b..18affff85ce3 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -155,6 +155,8 @@
 
 		clocks = <&cgu JZ4780_CLK_RTCLK>;
 		clock-names = "rtc";
+
+		#clock-cells = <0>;
 	};
 
 	pinctrl: pin-controller@10010000 {
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 510be63c8bdf..7a7ba66aa534 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -40,7 +40,6 @@
 		eiu0: eiu@101000 {
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			compatible = "lantiq,eiu-xway";
 			reg = <0x101000 0x1000>;
 		};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
index ab70637bbec5..b1c5ffdb33fc 100644
--- a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -28,19 +28,19 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
 
-		led@1 {
+		led-1 {
 			label = "pic32mzda_sk:red:led1";
 			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		led@2 {
+		led-2 {
 			label = "pic32mzda_sk:yellow:led2";
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 
-		led@3 {
+		led-3 {
 			label = "pic32mzda_sk:green:led3";
 			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index f3dff4009ab5..f894fe17816b 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -41,23 +41,23 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led-0 {
 			label = "tp-link:green:usb";
 			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 		};
 
-		led@1 {
+		led-1 {
 			label = "tp-link:green:system";
 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		led@2 {
+		led-2 {
 			label = "tp-link:green:qss";
 			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		led@3 {
+		led-3 {
 			label = "tp-link:green:wlan";
 			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
index 40e4c5da0e65..7affa58d4fa6 100644
--- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -22,25 +22,25 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wlan {
+		led-wlan {
 			label = "dragino2:red:wlan";
 			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		lan {
+		led-lan {
 			label = "dragino2:red:lan";
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		wan {
+		led-wan {
 			label = "dragino2:red:wan";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		system {
+		led-system {
 			label = "dragino2:red:system";
 			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
index ed184d861d5f..8904aa917a6e 100644
--- a/arch/mips/boot/dts/qca/ar9331_omega.dts
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -22,7 +22,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		system {
+		led-system {
 			label = "onion:amber:system";
 			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
index 5f424c2cd781..10b9759228b7 100644
--- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -22,25 +22,25 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wlan {
+		led-wlan {
 			label = "tp-link:green:wlan";
 			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		lan {
+		led-lan {
 			label = "tp-link:green:lan";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		wps {
+		led-wps {
 			label = "tp-link:green:wps";
 			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led3g {
+		led-led3g {
 			label = "tp-link:green:3g";
 			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index 179558161f85..18107ca0a06b 100644
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -47,67 +47,67 @@
 		 * (see below). So we can't include it in this LED node.
 		 */
 
-		power_blue {
+		led-power-blue {
 			label = "smartgw:power:blue";
 			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		power_green {
+		led-power-green {
 			label = "smartgw:power:green";
 			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		power_red {
+		led-power-red {
 			label = "smartgw:power:red";
 			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_blue {
+		led-radio-blue {
 			label = "smartgw:radio:blue";
 			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_green {
+		led-radio-green {
 			label = "smartgw:radio:green";
 			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_red {
+		led-radio-red {
 			label = "smartgw:radio:red";
 			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_blue {
+		led-internet-blue {
 			label = "smartgw:internet:blue";
 			gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_green {
+		led-internet-green {
 			label = "smartgw:internet:green";
 			gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_red {
+		led-internet-red {
 			label = "smartgw:internet:red";
 			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		ethernet_link {
+		led-ethernet-link {
 			label = "smartgw:eth:link";
 			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "netdev";
 		};
 
-		ethernet_activity {
+		led-ethernet-activity {
 			label = "smartgw:eth:act";
 			gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "netdev";
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 0128bd8fa7ed..129b6710b699 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -33,13 +33,13 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "green:power";
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		system {
+		led-system {
 			label = "green:system";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "disk-activity";
@@ -91,22 +91,16 @@
 	status = "okay";
 };
 
-&gmac1 {
-	status = "okay";
-	phy-handle = <&ethphy4>;
-};
-
-&mdio {
-	ethphy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
 &switch0 {
 	ports {
 		port@0 {
 			status = "okay";
 			label = "ethblack";
 		};
+
+		port@4 {
+			status = "okay";
+			label = "ethblue";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index e31417569e09..f810cd10f4f4 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -33,33 +33,33 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		ethblack-green {
+		led-ethblack-green {
 			label = "green:ethblack";
 			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 		};
 
-		ethblue-green {
+		led-ethblue-green {
 			label = "green:ethblue";
 			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 		};
 
-		ethyellow-green {
+		led-ethyellow-green {
 			label = "green:ethyellow";
 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 		};
 
-		ethyellow-orange {
+		led-ethyellow-orange {
 			label = "orange:ethyellow";
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "green:power";
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		system {
+		led-system {
 			label = "green:system";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "disk-activity";
@@ -112,9 +112,12 @@
 };
 
 &gmac1 {
-	status = "okay";
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy5>;
+
+	fixed-link {
+		status = "disabled";
+	};
 };
 
 &mdio {
@@ -134,5 +137,9 @@
 			status = "okay";
 			label = "ethblue";
 		};
+
+		port@5 {
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index aec85c779359..290d47fbcfbb 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -332,8 +332,13 @@
 		gmac1: mac@1 {
 			compatible = "mediatek,eth-mac";
 			reg = <1>;
-			status = "disabled";
 			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
 		};
 
 		mdio: mdio-bus {
@@ -384,6 +389,18 @@
 						label = "swp4";
 					};
 
+					port@5 {
+						reg = <5>;
+						ethernet = <&gmac1>;
+						phy-mode = "rgmii";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							pause;
+						};
+					};
+
 					port@6 {
 						reg = <6>;
 						ethernet = <&gmac0>;
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 5cffe1ed2447..28677c615175 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -245,7 +245,7 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base)
 			power_active_low = 0;
 			gpio = gpio_pwr[1];
 		} else {
-			dev_err(dev, "dwc3 controller clock init failure.\n");
+			dev_err(dev, "invalid power configuration\n");
 			return -EINVAL;
 		}
 		if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
@@ -278,7 +278,7 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base)
 		uctl_host_cfg.s.ppc_en = 0;
 		uctl_host_cfg.s.ppc_active_high_en = 0;
 		cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
-		dev_warn(dev, "dwc3 controller clock init failure.\n");
+		dev_info(dev, "power control disabled\n");
 	}
 	return 0;
 }
@@ -301,19 +301,19 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
 		i = of_property_read_u32(dev->of_node,
 					 "refclk-frequency", &clock_rate);
 		if (i) {
-			pr_err("No UCTL \"refclk-frequency\"\n");
+			dev_err(dev, "No UCTL \"refclk-frequency\"\n");
 			return -EINVAL;
 		}
 		i = of_property_read_string(dev->of_node,
 					    "refclk-type-ss", &ss_clock_type);
 		if (i) {
-			pr_err("No UCTL \"refclk-type-ss\"\n");
+			dev_err(dev, "No UCTL \"refclk-type-ss\"\n");
 			return -EINVAL;
 		}
 		i = of_property_read_string(dev->of_node,
 					    "refclk-type-hs", &hs_clock_type);
 		if (i) {
-			pr_err("No UCTL \"refclk-type-hs\"\n");
+			dev_err(dev, "No UCTL \"refclk-type-hs\"\n");
 			return -EINVAL;
 		}
 		if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
@@ -322,29 +322,29 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
 			else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
 				ref_clk_sel = 2;
 			else
-				pr_err("Invalid HS clock type %s, using  pll_ref_clk instead\n",
-				       hs_clock_type);
+				dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
+					 hs_clock_type);
 		} else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
 			if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
 				ref_clk_sel = 1;
 			else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
 				ref_clk_sel = 3;
 			else {
-				pr_err("Invalid HS clock type %s, using  pll_ref_clk instead\n",
-				       hs_clock_type);
+				dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
+					 hs_clock_type);
 				ref_clk_sel = 3;
 			}
 		} else
-			pr_err("Invalid SS clock type %s, using  dlmc_ref_clk0 instead\n",
-			       ss_clock_type);
+			dev_warn(dev, "Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
+				 ss_clock_type);
 
 		if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
-				  (clock_rate != 100000000))
-			pr_err("Invalid UCTL clock rate of %u, using 100000000 instead\n",
-			       clock_rate);
+		    (clock_rate != 100000000))
+			dev_warn(dev, "Invalid UCTL clock rate of %u, using 100000000 instead\n",
+				 clock_rate);
 
 	} else {
-		pr_err("No USB UCTL device node\n");
+		dev_err(dev, "No USB UCTL device node\n");
 		return -EINVAL;
 	}
 
@@ -396,8 +396,8 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
 	uctl_ctl.s.ref_clk_div2 = 0;
 	switch (clock_rate) {
 	default:
-		dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
-			clock_rate);
+		dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n",
+			 clock_rate);
 		fallthrough;
 	case 100000000:
 		mpll_mul = 0x19;
@@ -438,10 +438,8 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
 	udelay(10);
 
 	/* Steo 8c: Setup power-power control. */
-	if (dwc3_octeon_config_power(dev, base)) {
-		dev_err(dev, "Error configuring power.\n");
+	if (dwc3_octeon_config_power(dev, base))
 		return -EINVAL;
-	}
 
 	/* Step 8d: Deassert UAHC reset signal. */
 	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
@@ -529,10 +527,10 @@ static int __init dwc3_octeon_device_init(void)
 			}
 
 			mutex_lock(&dwc3_octeon_clocks_mutex);
-			dwc3_octeon_clocks_start(&pdev->dev, (u64)base);
+			if (dwc3_octeon_clocks_start(&pdev->dev, (u64)base) == 0)
+				dev_info(&pdev->dev, "clocks initialized.\n");
 			dwc3_octeon_set_endian_mode((u64)base);
 			dwc3_octeon_phy_reset((u64)base);
-			dev_info(&pdev->dev, "clocks initialized.\n");
 			mutex_unlock(&dwc3_octeon_clocks_mutex);
 			devm_iounmap(&pdev->dev, base);
 			devm_release_mem_region(&pdev->dev, res->start,
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
index 30f4114ab872..3c401f11655e 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -61,6 +61,7 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_LINKSYS_E1000V21,
 	BCM47XX_BOARD_LINKSYS_E1200V2,
 	BCM47XX_BOARD_LINKSYS_E2000V1,
+	BCM47XX_BOARD_LINKSYS_E2500V3,
 	BCM47XX_BOARD_LINKSYS_E3000V1,
 	BCM47XX_BOARD_LINKSYS_E3200V1,
 	BCM47XX_BOARD_LINKSYS_E4200V1,
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
index 9a6eefd12757..3eb767c8a4ee 100644
--- a/arch/mips/include/asm/mach-rc32434/pci.h
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -374,7 +374,7 @@ struct pci_msu {
 				 PCI_CFG04_STAT_SSE | \
 				 PCI_CFG04_STAT_PE)
 
-#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
+#define KORINA_CNFG1		(KORINA_STAT | KORINA_CMD)
 
 #define KORINA_REVID		0
 #define KORINA_CLASS_CODE	0
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index 25fa651c937d..ebdf4d910af2 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -38,7 +38,7 @@ static inline bool mips_syscall_is_indirect(struct task_struct *task,
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
 {
-	return current_thread_info()->syscall;
+	return task_thread_info(task)->syscall;
 }
 
 static inline void mips_syscall_update_nr(struct task_struct *task,
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
index baa949a744cb..ef7e07829607 100644
--- a/arch/mips/include/asm/vpe.h
+++ b/arch/mips/include/asm/vpe.h
@@ -102,7 +102,6 @@ struct vpe_control {
 	struct list_head tc_list;       /* Thread contexts */
 };
 
-extern unsigned long physical_memsize;
 extern struct vpe_control vpecontrol;
 extern const struct file_operations vpe_fops;
 
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index bcd6a944b839..f2df0cae1b4d 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -424,9 +424,11 @@ static void cps_shutdown_this_cpu(enum cpu_death death)
 			wmb();
 		}
 	} else {
-		pr_debug("Gating power to core %d\n", core);
-		/* Power down the core */
-		cps_pm_enter_state(CPS_PM_POWER_GATED);
+		if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
+			pr_debug("Gating power to core %d\n", core);
+			/* Power down the core */
+			cps_pm_enter_state(CPS_PM_POWER_GATED);
+		}
 	}
 }
 
diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c
index 84a82b551ec3..223d6274f2e5 100644
--- a/arch/mips/kernel/vpe-mt.c
+++ b/arch/mips/kernel/vpe-mt.c
@@ -92,12 +92,11 @@ int vpe_run(struct vpe *v)
 	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
 
 	/*
-	 * The sde-kit passes 'memsize' to __start in $a3, so set something
-	 * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and
-	 * DFLT_HEAP_SIZE when you compile your program
+	 * We don't pass the memsize here, so VPE programs need to be
+	 * compiled with DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined.
 	 */
+	mttgpr(7, 0);
 	mttgpr(6, v->ntcs);
-	mttgpr(7, physical_memsize);
 
 	/* set up VPE1 */
 	/*
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index be4829cc7a3a..a3cf29365858 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -23,12 +23,6 @@ DEFINE_SPINLOCK(ebu_lock);
 EXPORT_SYMBOL_GPL(ebu_lock);
 
 /*
- * This is needed by the VPE loader code, just set it to 0 and assume
- * that the firmware hardcodes this value to something useful.
- */
-unsigned long physical_memsize = 0L;
-
-/*
  * this struct is filled by the soc specific detection code and holds
  * information about the specific soc type, revision and name
  */
diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
index 4960bee0a99d..96199966a350 100644
--- a/arch/mips/lantiq/xway/dcdc.c
+++ b/arch/mips/lantiq/xway/dcdc.c
@@ -22,10 +22,7 @@ static void __iomem *dcdc_membase;
 
 static int dcdc_probe(struct platform_device *pdev)
 {
-	struct resource *res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dcdc_membase = devm_ioremap_resource(&pdev->dev, res);
+	dcdc_membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(dcdc_membase))
 		return PTR_ERR(dcdc_membase);
 
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index f8eedeb15f18..934ac72937e5 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -239,12 +239,10 @@ static int
 ltq_dma_init(struct platform_device *pdev)
 {
 	struct clk *clk;
-	struct resource *res;
 	unsigned int id, nchannels;
 	int i;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ltq_dma_membase = devm_ioremap_resource(&pdev->dev, res);
+	ltq_dma_membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(ltq_dma_membase))
 		panic("Failed to remap dma resource");
 
diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
index 200fe9ff641d..a492b1eb1925 100644
--- a/arch/mips/lantiq/xway/gptu.c
+++ b/arch/mips/lantiq/xway/gptu.c
@@ -136,17 +136,14 @@ static inline void clkdev_add_gptu(struct device *dev, const char *con,
 static int gptu_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
-	struct resource *res;
 
 	if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 6) != 6) {
 		dev_err(&pdev->dev, "Failed to get IRQ list\n");
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
 	/* remap gptu register range */
-	gptu_membase = devm_ioremap_resource(&pdev->dev, res);
+	gptu_membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(gptu_membase))
 		return PTR_ERR(gptu_membase);
 
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 8d16cd021f60..d967e4c0cf24 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -204,17 +204,13 @@ static int ltq_pci_startup(struct platform_device *pdev)
 
 static int ltq_pci_probe(struct platform_device *pdev)
 {
-	struct resource *res_cfg, *res_bridge;
-
 	pci_clear_flags(PCI_PROBE_ONLY);
 
-	res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
+	ltq_pci_membase = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
 	if (IS_ERR(ltq_pci_membase))
 		return PTR_ERR(ltq_pci_membase);
 
-	res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
+	ltq_pci_mapped_cfg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(ltq_pci_mapped_cfg))
 		return PTR_ERR(ltq_pci_mapped_cfg);
 
diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
index e032932348d6..2700d75d41c5 100644
--- a/arch/mips/pci/pci-mt7620.c
+++ b/arch/mips/pci/pci-mt7620.c
@@ -282,21 +282,17 @@ static int mt7628_pci_hw_init(struct platform_device *pdev)
 
 static int mt7620_pci_probe(struct platform_device *pdev)
 {
-	struct resource *bridge_res = platform_get_resource(pdev,
-							    IORESOURCE_MEM, 0);
-	struct resource *pcie_res = platform_get_resource(pdev,
-							  IORESOURCE_MEM, 1);
 	u32 val = 0;
 
 	rstpcie0 = devm_reset_control_get_exclusive(&pdev->dev, "pcie0");
 	if (IS_ERR(rstpcie0))
 		return PTR_ERR(rstpcie0);
 
-	bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
+	bridge_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(bridge_base))
 		return PTR_ERR(bridge_base);
 
-	pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
+	pcie_base = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
 	if (IS_ERR(pcie_base))
 		return PTR_ERR(pcie_base);
 
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index f9fe15630abb..06031796c87b 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -54,10 +54,11 @@ choice
 		select HAVE_PCI
 		select PCI_DRIVERS_GENERIC
 		select SOC_BUS
+		select PINCTRL_MT7621
 
 		help
-		  The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU,
-		  a 5-port 10/100/1000 switch/PHY and one RGMII.
+		  The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc
+		  dual-core CPU, a 5-port 10/100/1000 switch/PHY and one RGMII.
 endchoice
 
 choice
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
index 652424d8ed51..fc503679a93d 100644
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -95,7 +95,6 @@ static int rt_timer_enable(struct rt_timer *rt)
 
 static int rt_timer_probe(struct platform_device *pdev)
 {
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct rt_timer *rt;
 	struct clk *clk;
 
@@ -109,7 +108,7 @@ static int rt_timer_probe(struct platform_device *pdev)
 	if (rt->irq < 0)
 		return rt->irq;
 
-	rt->membase = devm_ioremap_resource(&pdev->dev, res);
+	rt->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(rt->membase))
 		return PTR_ERR(rt->membase);
 
diff --git a/arch/mips/vdso/Kconfig b/arch/mips/vdso/Kconfig
index a665f6108cb5..70140248da72 100644
--- a/arch/mips/vdso/Kconfig
+++ b/arch/mips/vdso/Kconfig
@@ -1,18 +1,6 @@
-# For the pre-R6 code in arch/mips/vdso/vdso.h for locating
-# the base address of VDSO, the linker will emit a R_MIPS_PC32
-# relocation in binutils > 2.25 but it will fail with older versions
-# because that relocation is not supported for that symbol. As a result
-# of which we are forced to disable the VDSO symbols when building
-# with < 2.25 binutils on pre-R6 kernels. For more references on why we
-# can't use other methods to get the base address of VDSO please refer to
-# the comments on that file.
-#
 # GCC (at least up to version 9.2) appears to emit function calls that make use
 # of the GOT when targeting microMIPS, which we can't use in the VDSO due to
 # the lack of relocations. As such, we disable the VDSO for microMIPS builds.
 
-config MIPS_LD_CAN_LINK_VDSO
-	def_bool LD_VERSION >= 22500 || LD_IS_LLD
-
 config MIPS_DISABLE_VDSO
-	def_bool CPU_MICROMIPS || (!CPU_MIPSR6 && !MIPS_LD_CAN_LINK_VDSO)
+	def_bool CPU_MICROMIPS
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index 1f7d5c6c10b0..18af9474ed0e 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -52,9 +52,6 @@ endif
 CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE)
 
 ifdef CONFIG_MIPS_DISABLE_VDSO
-  ifndef CONFIG_MIPS_LD_CAN_LINK_VDSO
-    $(warning MIPS VDSO requires binutils >= 2.25)
-  endif
   obj-vdso-y := $(filter-out vgettimeofday.o, $(obj-vdso-y))
 endif