Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6

* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits)
  module_param: make bool parameters really bool (drivers/video/i810)
  Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual."
  OMAPDSS: HDMI: Disable DDC internal pull up
  OMAPDSS: HDMI: Move duplicate code from boardfile
  OMAPDSS: add OrtusTech COM43H4M10XTC display support
  OMAP: DSS2: Support for UMSH-8173MD TFT panel
  ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver
  OMAPDSS: HDMI: Create function to enable HDMI audio
  ASoC: OMAP: HDMI: Correct signature of ASoC functions
  ASoC: OMAP: HDMI: Introduce driver data for audio codec
  grvga: fix section mismatch warnings
  video: s3c-fb: Don't keep device runtime active when open
  video: s3c-fb: Hold runtime PM references when touching registers
  video: s3c-fb: Take a runtime PM reference when unblanked
  video: s3c-fb: Disable runtime PM in error paths from probe
  video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer
  video: s3c-fb: Make runtime PM functional again
  drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory()
  drivers/video: fsl-diu-fb: add default platform ops functions
  drivers/video: fsl-diu-fb: remove broken reference count enabling the display
  ...

13 files changed, 134 insertions, 52 deletions

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 2ceb75d21eb2..39fba9df17fb 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -602,20 +602,6 @@ static void __init omap_sfh7741prox_init(void)
 			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 }
 
-static void sdp4430_hdmi_mux_init(void)
-{
-	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
 static struct gpio sdp4430_hdmi_gpios[] = {
 	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_hpd"   },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_ls_oe" },
@@ -833,9 +819,16 @@ static void omap_4430sdp_display_init(void)
 		pr_err("%s: Could not get display_sel GPIO\n", __func__);
 
 	sdp4430_lcd_init();
-	sdp4430_hdmi_mux_init();
 	sdp4430_picodlp_init();
 	omap_display_init(&sdp4430_dss_data);
+	/*
+	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+	 * later have external pull up on the HDMI I2C lines
+	 */
+	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+	else
+		omap_hdmi_init(0);
 }
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e96a2e7ad36f..30ad40db2cf3 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -412,21 +412,6 @@ int __init omap4_panda_dvi_init(void)
 	return r;
 }
 
-
-static void omap4_panda_hdmi_mux_init(void)
-{
-	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
 static struct gpio panda_hdmi_gpios[] = {
 	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd"   },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -478,8 +463,16 @@ void omap4_panda_display_init(void)
 	if (r)
 		pr_err("error initializing panda DVI\n");
 
-	omap4_panda_hdmi_mux_init();
 	omap_display_init(&omap4_panda_dss_data);
+
+	/*
+	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+	 * later have external pull up on the HDMI I2C lines
+	 */
+	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+	else
+		omap_hdmi_init(0);
 }
 
 static void __init omap4_panda_init(void)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index bc6cf863a563..3c446d1a1781 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -30,6 +30,7 @@
 #include <plat/omap-pm.h>
 #include "common.h"
 
+#include "mux.h"
 #include "control.h"
 #include "display.h"
 
@@ -97,6 +98,36 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
+{
+	u32 reg;
+	u16 control_i2c_1;
+
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+
+	/*
+	 * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
+	 * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
+	 * internal pull up resistor.
+	 */
+	if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
+		control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
+		reg = omap4_ctrl_pad_readl(control_i2c_1);
+		reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
+			OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
+			omap4_ctrl_pad_writel(reg, control_i2c_1);
+	}
+}
+
 static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 {
 	u32 enable_mask, enable_shift;
@@ -130,6 +161,14 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	return 0;
 }
 
+int omap_hdmi_init(enum omap_hdmi_flags flags)
+{
+	if (cpu_is_omap44xx())
+		omap4_hdmi_mux_pads(flags);
+
+	return 0;
+}
+
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
 	if (cpu_is_omap44xx())
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index a4e6ca04e319..eff8a96c75ee 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -271,7 +271,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 		.flags = LCDC_FLAGS_DWPOL,
 		.lcd_size_cfg.width = 44,
 		.lcd_size_cfg.height = 79,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.lcd_cfg = lcdc0_modes,
 		.num_cfg = ARRAY_SIZE(lcdc0_modes),
 		.board_cfg = {
@@ -321,12 +321,46 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
+#define DSI0PHYCR	0xe615006c
+static int sh_mipi_set_dot_clock(struct platform_device *pdev,
+				 void __iomem *base,
+				 int enable)
+{
+	struct clk *pck;
+	int ret;
+
+	pck = clk_get(&pdev->dev, "dsip_clk");
+	if (IS_ERR(pck)) {
+		ret = PTR_ERR(pck);
+		goto sh_mipi_set_dot_clock_pck_err;
+	}
+
+	if (enable) {
+		clk_set_rate(pck, clk_round_rate(pck,  24000000));
+		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_enable(pck);
+	} else {
+		clk_disable(pck);
+	}
+
+	ret = 0;
+
+	clk_put(pck);
+
+sh_mipi_set_dot_clock_pck_err:
+	return ret;
+}
+
 static struct sh_mipi_dsi_info mipidsi0_info = {
 	.data_format	= MIPI_RGB888,
 	.lcd_chan	= &lcdc0_info.ch[0],
+	.lane		= 2,
 	.vsynw_offset	= 20,
 	.clksrc		= 1,
-	.flags		= SH_MIPI_DSI_HSABM,
+	.flags		= SH_MIPI_DSI_HSABM		|
+			  SH_MIPI_DSI_SYNC_PULSES_MODE	|
+			  SH_MIPI_DSI_HSbyteCLK,
+	.set_dot_clock	= sh_mipi_set_dot_clock,
 };
 
 static struct platform_device mipidsi0_device = {
@@ -472,8 +506,6 @@ static void __init ag5evm_map_io(void)
 	shmobile_setup_console();
 }
 
-#define DSI0PHYCR	0xe615006c
-
 static void __init ag5evm_init(void)
 {
 	sh73a0_pinmux_init();
@@ -554,9 +586,6 @@ static void __init ag5evm_init(void)
 	gpio_direction_output(GPIO_PORT235, 0);
 	lcd_backlight_reset();
 
-	/* MIPI-DSI clock setup */
-	__raw_writel(0x2a809010, DSI0PHYCR);
-
 	/* enable SDHI0 on CN15 [SD I/F] */
 	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d2e7b73aa9b6..aab0a349f759 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -491,7 +491,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 	.meram_dev = &meram_info,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.lcd_cfg = ap4evb_lcdc_modes,
 		.num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
 		.meram_cfg = &lcd_meram_cfg,
@@ -564,6 +564,30 @@ static struct platform_device keysc_device = {
 };
 
 /* MIPI-DSI */
+#define PHYCTRL		0x0070
+static int sh_mipi_set_dot_clock(struct platform_device *pdev,
+				 void __iomem *base,
+				 int enable)
+{
+	struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
+	void __iomem *phy =  base + PHYCTRL;
+
+	if (IS_ERR(pck))
+		return PTR_ERR(pck);
+
+	if (enable) {
+		clk_set_rate(pck, clk_round_rate(pck, 24000000));
+		iowrite32(ioread32(phy) | (0xb << 8), phy);
+		clk_enable(pck);
+	} else {
+		clk_disable(pck);
+	}
+
+	clk_put(pck);
+
+	return 0;
+}
+
 static struct resource mipidsi0_resources[] = {
 	[0] = {
 		.start  = 0xffc60000,
@@ -580,7 +604,11 @@ static struct resource mipidsi0_resources[] = {
 static struct sh_mipi_dsi_info mipidsi0_info = {
 	.data_format	= MIPI_RGB888,
 	.lcd_chan	= &lcdc_info.ch[0],
+	.lane		= 2,
 	.vsynw_offset	= 17,
+	.flags		= SH_MIPI_DSI_SYNC_PULSES_MODE |
+			  SH_MIPI_DSI_HSbyteCLK,
+	.set_dot_clock	= sh_mipi_set_dot_clock,
 };
 
 static struct platform_device mipidsi0_device = {
@@ -798,7 +826,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
 	.meram_dev = &meram_info,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = RGB24,
 		.clock_divider = 1,
 		.flags = LCDC_FLAGS_DWPOL,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index cbc5934ae03f..9b42fbd10f8e 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -388,7 +388,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_BUS,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.lcd_cfg = mackerel_lcdc_modes,
 		.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
 		.interface_type		= RGB24,
@@ -451,7 +451,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = RGB24,
 		.clock_divider = 1,
 		.flags = LCDC_FLAGS_DWPOL,
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index e349c22a0d71..293456d8dcfd 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -612,8 +612,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 34944d01bf1e..afbead6a6e17 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -427,8 +427,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 74d49c01783b..6418e95c2b6b 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -207,7 +207,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = RGB18,
 		.clock_divider = 1,
 		.lcd_cfg = ap325rxa_lcdc_modes,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 9a19fb07276c..033ef2ba621f 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -324,7 +324,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.interface_type = RGB18,
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.lcd_size_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 5c3c71366848..2a18b06abdaf 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -143,7 +143,7 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 	.clock_source = LCDC_CLK_BUS,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = SYS18,
 		.clock_divider = 6,
 		.flags = LCDC_FLAGS_DWPOL,
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f8f9377d5684..68c3d6f42896 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -241,7 +241,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 	.clock_source = LCDC_CLK_BUS,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = RGB16,
 		.clock_divider = 2,
 		.lcd_cfg = migor_lcd_modes,
@@ -255,7 +255,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 	.clock_source = LCDC_CLK_PERIPHERAL,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = SYS16A,
 		.clock_divider = 10,
 		.lcd_cfg = migor_lcd_modes,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 2585733e9bce..036fe1adaef1 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -179,7 +179,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
-		.bpp = 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.clock_divider = 1,
 		.lcd_size_cfg = { /* 7.0 inch */
 			.width = 152,