Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 - a short branch of OMAP fixes that we didn't merge before the window
   opened.
 - a small cleanup that sorts the rk3288 dts entries properly
 - a build fix due to a reference to a removed DT node on exynos

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos5420: remove disp_pd
  ARM: EXYNOS: Fix suspend/resume sequences
  ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi
  ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c
  ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.
  ARM: OMAP2+: clock: allow omap2_dpll_round_rate() to round to next-lowest rate

6 files changed, 131 insertions, 120 deletions

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 95ec37dff3e8..bfe056d9148c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -525,7 +525,6 @@
 		compatible = "samsung,exynos5410-mipi-dsi";
 		reg = <0x14500000 0x10000>;
 		interrupts = <0 82 0>;
-		samsung,power-domain = <&disp_pd>;
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
 		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index e7cb00873dd4..5950b0a53224 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -195,6 +195,26 @@
 		status = "disabled";
 	};
 
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0xff500000 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
+
+	usb_hsic: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0xff5c0000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HSIC>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
 	i2c0: i2c@ff650000 {
 		compatible = "rockchip,rk3288-i2c";
 		reg = <0xff650000 0x1000>;
@@ -251,26 +271,6 @@
 		status = "disabled";
 	};
 
-	usb_host0_ehci: usb@ff500000 {
-		compatible = "generic-ehci";
-		reg = <0xff500000 0x100>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_USBHOST0>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
-	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
-
-	usb_hsic: usb@ff5c0000 {
-		compatible = "generic-ehci";
-		reg = <0xff5c0000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_HSIC>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
 	gic: interrupt-controller@ffc01000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 18646b7e226b..abefacb45976 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -114,26 +114,6 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
 #define S5P_CHECK_AFTR  0xFCBA0D10
 #define S5P_CHECK_SLEEP 0x00000BAD
 
-/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
-static void exynos_set_wakeupmask(long mask)
-{
-	pmu_raw_writel(mask, S5P_WAKEUP_MASK);
-}
-
-static void exynos_cpu_set_boot_vector(long flags)
-{
-	__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
-	__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
-}
-
-void exynos_enter_aftr(void)
-{
-	exynos_set_wakeupmask(0x0000ff3e);
-	exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
-	/* Set value of power down register for aftr mode */
-	exynos_sys_powerdown_conf(SYS_AFTR);
-}
-
 /* For Cortex-A9 Diagnostic and Power control register */
 static unsigned int save_arm_register[2];
 
@@ -173,6 +153,82 @@ static void exynos_cpu_restore_register(void)
 		      : "cc");
 }
 
+static void exynos_pm_central_suspend(void)
+{
+	unsigned long tmp;
+
+	/* Setting Central Sequence Register for power down mode */
+	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+}
+
+static int exynos_pm_central_resume(void)
+{
+	unsigned long tmp;
+
+	/*
+	 * If PMU failed while entering sleep mode, WFI will be
+	 * ignored by PMU and then exiting cpu_do_idle().
+	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+	 * in this situation.
+	 */
+	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+		tmp |= S5P_CENTRAL_LOWPWR_CFG;
+		pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+		/* clear the wakeup state register */
+		pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
+		/* No need to perform below restore code */
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos_set_wakeupmask(long mask)
+{
+	pmu_raw_writel(mask, S5P_WAKEUP_MASK);
+}
+
+static void exynos_cpu_set_boot_vector(long flags)
+{
+	__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
+	__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
+}
+
+static int exynos_aftr_finisher(unsigned long flags)
+{
+	exynos_set_wakeupmask(0x0000ff3e);
+	exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+	/* Set value of power down register for aftr mode */
+	exynos_sys_powerdown_conf(SYS_AFTR);
+	cpu_do_idle();
+
+	return 1;
+}
+
+void exynos_enter_aftr(void)
+{
+	cpu_pm_enter();
+
+	exynos_pm_central_suspend();
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+		exynos_cpu_save_register();
+
+	cpu_suspend(0, exynos_aftr_finisher);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		scu_enable(S5P_VA_SCU);
+		exynos_cpu_restore_register();
+	}
+
+	exynos_pm_central_resume();
+
+	cpu_pm_exit();
+}
+
 static int exynos_cpu_suspend(unsigned long arg)
 {
 #ifdef CONFIG_CACHE_L2X0
@@ -217,16 +273,6 @@ static void exynos_pm_prepare(void)
 	pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
 }
 
-static void exynos_pm_central_suspend(void)
-{
-	unsigned long tmp;
-
-	/* Setting Central Sequence Register for power down mode */
-	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-}
-
 static int exynos_pm_suspend(void)
 {
 	unsigned long tmp;
@@ -244,29 +290,6 @@ static int exynos_pm_suspend(void)
 	return 0;
 }
 
-static int exynos_pm_central_resume(void)
-{
-	unsigned long tmp;
-
-	/*
-	 * If PMU failed while entering sleep mode, WFI will be
-	 * ignored by PMU and then exiting cpu_do_idle().
-	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
-	 * in this situation.
-	 */
-	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
-		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-		/* clear the wakeup state register */
-		pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
-		/* No need to perform below restore code */
-		return -1;
-	}
-
-	return 0;
-}
-
 static void exynos_pm_resume(void)
 {
 	if (exynos_pm_central_resume())
@@ -369,44 +392,10 @@ static const struct platform_suspend_ops exynos_suspend_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int exynos_cpu_pm_notifier(struct notifier_block *self,
-				  unsigned long cmd, void *v)
-{
-	int cpu = smp_processor_id();
-
-	switch (cmd) {
-	case CPU_PM_ENTER:
-		if (cpu == 0) {
-			exynos_pm_central_suspend();
-			if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-				exynos_cpu_save_register();
-		}
-		break;
-
-	case CPU_PM_EXIT:
-		if (cpu == 0) {
-			if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
-				scu_enable(S5P_VA_SCU);
-				exynos_cpu_restore_register();
-			}
-			exynos_pm_central_resume();
-		}
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block exynos_cpu_pm_notifier_block = {
-	.notifier_call = exynos_cpu_pm_notifier,
-};
-
 void __init exynos_pm_init(void)
 {
 	u32 tmp;
 
-	cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block);
-
 	/* Platform-specific GIC callback */
 	gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
 
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index b2ff6cd7ca9f..f251a14cbf16 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -285,10 +285,13 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 {
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	int m, n, r, scaled_max_m;
+	int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
 	unsigned long scaled_rt_rp;
 	unsigned long new_rate = 0;
 	struct dpll_data *dd;
 	unsigned long ref_rate;
+	long delta;
+	long prev_min_delta = LONG_MAX;
 	const char *clk_name;
 
 	if (!clk || !clk->dpll_data)
@@ -334,23 +337,34 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 		if (r == DPLL_MULT_UNDERFLOW)
 			continue;
 
+		/* skip rates above our target rate */
+		delta = target_rate - new_rate;
+		if (delta < 0)
+			continue;
+
+		if (delta < prev_min_delta) {
+			prev_min_delta = delta;
+			min_delta_m = m;
+			min_delta_n = n;
+		}
+
 		pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
 			 clk_name, m, n, new_rate);
 
-		if (target_rate == new_rate) {
-			dd->last_rounded_m = m;
-			dd->last_rounded_n = n;
-			dd->last_rounded_rate = target_rate;
+		if (delta == 0)
 			break;
-		}
 	}
 
-	if (target_rate != new_rate) {
+	if (prev_min_delta == LONG_MAX) {
 		pr_debug("clock: %s: cannot round to rate %lu\n",
 			 clk_name, target_rate);
 		return ~0;
 	}
 
-	return target_rate;
+	dd->last_rounded_m = min_delta_m;
+	dd->last_rounded_n = min_delta_n;
+	dd->last_rounded_rate = target_rate - prev_min_delta;
+
+	return dd->last_rounded_rate;
 }
 
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index f4796c002070..da041b4ab29c 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -280,6 +280,7 @@ void omap3_clear_scratchpad_contents(void)
 	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
 	void __iomem *v_addr;
 	u32 offset = 0;
+
 	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
 	if (omap3xxx_prm_clear_global_cold_reset()) {
 		for ( ; offset <= max_offset; offset += 0x4)
@@ -309,7 +310,8 @@ void omap3_save_scratchpad_contents(void)
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(omap3_restore_3630);
 	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
-					omap_rev() != OMAP3430_REV_ES3_1)
+					omap_rev() != OMAP3430_REV_ES3_1 &&
+					omap_rev() != OMAP3430_REV_ES3_1_2)
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(omap3_restore);
 	else
@@ -463,7 +465,6 @@ void omap3_control_save_context(void)
 	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
 	control_context.padconf_sys_nirq =
 		omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
-	return;
 }
 
 void omap3_control_restore_context(void)
@@ -521,7 +522,6 @@ void omap3_control_restore_context(void)
 	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
 	omap_ctrl_writel(control_context.padconf_sys_nirq,
 			 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
-	return;
 }
 
 void omap3630_ctrl_disable_rta(void)
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index cd5f3a0b97bd..ac3d789ac3cd 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -475,6 +475,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	struct clk *new_parent = NULL;
+	unsigned long rrate;
 	u16 freqsel = 0;
 	struct dpll_data *dd;
 	int ret;
@@ -502,8 +503,16 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 		__clk_prepare(dd->clk_ref);
 		clk_enable(dd->clk_ref);
 
-		if (dd->last_rounded_rate != rate)
-			rate = __clk_round_rate(hw->clk, rate);
+		/* XXX this check is probably pointless in the CCF context */
+		if (dd->last_rounded_rate != rate) {
+			rrate = __clk_round_rate(hw->clk, rate);
+			if (rrate != rate) {
+				pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n",
+					__func__, __clk_get_name(hw->clk),
+					rrate, rate);
+				rate = rrate;
+			}
+		}
 
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;