Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 610 insertions, 0 deletions

diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
new file mode 100644
index 000000000000..6c84da3efc73
--- /dev/null
+++ b/arch/sh64/kernel/time.c
@@ -0,0 +1,610 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/time.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003  Richard Curnow
+ *
+ *    Original TMU/RTC code taken from sh version.
+ *    Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *      Some code taken from i386 version.
+ *      Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+
+#include <asm/registers.h>	 /* required by inline __asm__ stmt. */
+
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+
+#include <linux/timex.h>
+#include <linux/irq.h>
+#include <asm/hardware.h>
+
+#define TMU_TOCR_INIT	0x00
+#define TMU0_TCR_INIT	0x0020
+#define TMU_TSTR_INIT	1
+#define TMU_TSTR_OFF	0
+
+/* RCR1 Bits */
+#define RCR1_CF		0x80	/* Carry Flag             */
+#define RCR1_CIE	0x10	/* Carry Interrupt Enable */
+#define RCR1_AIE	0x08	/* Alarm Interrupt Enable */
+#define RCR1_AF		0x01	/* Alarm Flag             */
+
+/* RCR2 Bits */
+#define RCR2_PEF	0x80	/* PEriodic interrupt Flag */
+#define RCR2_PESMASK	0x70	/* Periodic interrupt Set  */
+#define RCR2_RTCEN	0x08	/* ENable RTC              */
+#define RCR2_ADJ	0x04	/* ADJustment (30-second)  */
+#define RCR2_RESET	0x02	/* Reset bit               */
+#define RCR2_START	0x01	/* Start bit               */
+
+/* Clock, Power and Reset Controller */
+#define	CPRC_BLOCK_OFF	0x01010000
+#define CPRC_BASE	PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
+
+#define FRQCR		(cprc_base+0x0)
+#define WTCSR		(cprc_base+0x0018)
+#define STBCR		(cprc_base+0x0030)
+
+/* Time Management Unit */
+#define	TMU_BLOCK_OFF	0x01020000
+#define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
+#define TMU0_BASE	tmu_base + 0x8 + (0xc * 0x0)
+#define TMU1_BASE	tmu_base + 0x8 + (0xc * 0x1)
+#define TMU2_BASE	tmu_base + 0x8 + (0xc * 0x2)
+
+#define TMU_TOCR	tmu_base+0x0	/* Byte access */
+#define TMU_TSTR	tmu_base+0x4	/* Byte access */
+
+#define TMU0_TCOR	TMU0_BASE+0x0	/* Long access */
+#define TMU0_TCNT	TMU0_BASE+0x4	/* Long access */
+#define TMU0_TCR	TMU0_BASE+0x8	/* Word access */
+
+/* Real Time Clock */
+#define	RTC_BLOCK_OFF	0x01040000
+#define RTC_BASE	PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
+
+#define R64CNT  	rtc_base+0x00
+#define RSECCNT 	rtc_base+0x04
+#define RMINCNT 	rtc_base+0x08
+#define RHRCNT  	rtc_base+0x0c
+#define RWKCNT  	rtc_base+0x10
+#define RDAYCNT 	rtc_base+0x14
+#define RMONCNT 	rtc_base+0x18
+#define RYRCNT  	rtc_base+0x1c	/* 16bit */
+#define RSECAR  	rtc_base+0x20
+#define RMINAR  	rtc_base+0x24
+#define RHRAR   	rtc_base+0x28
+#define RWKAR   	rtc_base+0x2c
+#define RDAYAR  	rtc_base+0x30
+#define RMONAR  	rtc_base+0x34
+#define RCR1    	rtc_base+0x38
+#define RCR2    	rtc_base+0x3c
+
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern unsigned long wall_jiffies;
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+static unsigned long tmu_base, rtc_base;
+unsigned long cprc_base;
+
+/* Variables to allow interpolation of time of day to resolution better than a
+ * jiffy. */
+
+/* This is effectively protected by xtime_lock */
+static unsigned long ctc_last_interrupt;
+static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
+
+#define CTC_JIFFY_SCALE_SHIFT 40
+
+/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
+static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
+
+/* Estimate number of microseconds that have elapsed since the last timer tick,
+   by scaling the delta that has occured in the CTC register.
+
+   WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
+   the CPU clock rate.  If the CPU sleeps, the CTC stops counting.  Bear this
+   in mind if enabling SLEEP_WORKS in process.c.  In that case, this algorithm
+   probably needs to use TMU.TCNT0 instead.  This will work even if the CPU is
+   sleeping, though will be coarser.
+
+   FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
+   is running or if the freq or tick arguments of adjtimex are modified after
+   we have calibrated the scaling factor?  This will result in either a jump at
+   the end of a tick period, or a wrap backwards at the start of the next one,
+   if the application is reading the time of day often enough.  I think we
+   ought to do better than this.  For this reason, usecs_per_jiffy is left
+   separated out in the calculation below.  This allows some future hook into
+   the adjtime-related stuff in kernel/timer.c to remove this hazard.
+
+*/
+
+static unsigned long usecs_since_tick(void)
+{
+	unsigned long long current_ctc;
+	long ctc_ticks_since_interrupt;
+	unsigned long long ull_ctc_ticks_since_interrupt;
+	unsigned long result;
+
+	unsigned long long mul1_out;
+	unsigned long long mul1_out_high;
+	unsigned long long mul2_out_low, mul2_out_high;
+
+	/* Read CTC register */
+	asm ("getcon cr62, %0" : "=r" (current_ctc));
+	/* Note, the CTC counts down on each CPU clock, not up.
+	   Note(2), use long type to get correct wraparound arithmetic when
+	   the counter crosses zero. */
+	ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
+	ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
+
+	/* Inline assembly to do 32x32x32->64 multiplier */
+	asm volatile ("mulu.l %1, %2, %0" :
+	     "=r" (mul1_out) :
+	     "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
+
+	mul1_out_high = mul1_out >> 32;
+
+	asm volatile ("mulu.l %1, %2, %0" :
+	     "=r" (mul2_out_low) :
+	     "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
+
+#if 1
+	asm volatile ("mulu.l %1, %2, %0" :
+	     "=r" (mul2_out_high) :
+	     "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
+#endif
+
+	result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
+
+	return result;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long flags;
+	unsigned long seq;
+	unsigned long usec, sec;
+
+	do {
+		seq = read_seqbegin_irqsave(&xtime_lock, flags);
+		usec = usecs_since_tick();
+		{
+			unsigned long lost = jiffies - wall_jiffies;
+
+			if (lost)
+				usec += lost * (1000000 / HZ);
+		}
+
+		sec = xtime.tv_sec;
+		usec += xtime.tv_nsec / 1000;
+	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+	while (usec >= 1000000) {
+		usec -= 1000000;
+		sec++;
+	}
+
+	tv->tv_sec = sec;
+	tv->tv_usec = usec;
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+	time_t wtm_sec, sec = tv->tv_sec;
+	long wtm_nsec, nsec = tv->tv_nsec;
+
+	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+		return -EINVAL;
+
+	write_seqlock_irq(&xtime_lock);
+	/*
+	 * This is revolting. We need to set "xtime" correctly. However, the
+	 * value in this location is the value at the most recent update of
+	 * wall time.  Discover what correction gettimeofday() would have
+	 * made, and then undo it!
+	 */
+	nsec -= 1000 * (usecs_since_tick() +
+				(jiffies - wall_jiffies) * (1000000 / HZ));
+
+	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+	set_normalized_timespec(&xtime, sec, nsec);
+	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+	time_adjust = 0;		/* stop active adjtime() */
+	time_status |= STA_UNSYNC;
+	time_maxerror = NTP_PHASE_LIMIT;
+	time_esterror = NTP_PHASE_LIMIT;
+	write_sequnlock_irq(&xtime_lock);
+	clock_was_set();
+
+	return 0;
+}
+
+static int set_rtc_time(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+
+	ctrl_outb(RCR2_RESET, RCR2);  /* Reset pre-scaler & stop RTC */
+
+	cmos_minutes = ctrl_inb(RMINCNT);
+	BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;	/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		BIN_TO_BCD(real_seconds);
+		BIN_TO_BCD(real_minutes);
+		ctrl_outb(real_seconds, RSECCNT);
+		ctrl_outb(real_minutes, RMINCNT);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_time: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2);  /* Start RTC */
+
+	return retval;
+}
+
+/* last time the RTC clock got updated */
+static long last_rtc_update = 0;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned long long current_ctc;
+	asm ("getcon cr62, %0" : "=r" (current_ctc));
+	ctc_last_interrupt = (unsigned long) current_ctc;
+
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	profile_tick(CPU_PROFILING, regs);
+
+#ifdef CONFIG_HEARTBEAT
+	{
+		extern void heartbeat(void);
+
+		heartbeat();
+	}
+#endif
+
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 */
+	if ((time_status & STA_UNSYNC) == 0 &&
+	    xtime.tv_sec > last_rtc_update + 660 &&
+	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+		if (set_rtc_time(xtime.tv_sec) == 0)
+			last_rtc_update = xtime.tv_sec;
+		else
+			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+	}
+}
+
+/*
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned long timer_status;
+
+	/* Clear UNF bit */
+	timer_status = ctrl_inw(TMU0_TCR);
+	timer_status &= ~0x100;
+	ctrl_outw(timer_status, TMU0_TCR);
+
+	/*
+	 * Here we are in the timer irq handler. We just have irqs locally
+	 * disabled but we don't know if the timer_bh is running on the other
+	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+	 * the irq version of write_lock because as just said we have irq
+	 * locally disabled. -arca
+	 */
+	write_lock(&xtime_lock);
+	do_timer_interrupt(irq, NULL, regs);
+	write_unlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned long get_rtc_time(void)
+{
+	unsigned int sec, min, hr, wk, day, mon, yr, yr100;
+
+ again:
+	do {
+		ctrl_outb(0, RCR1);  /* Clear CF-bit */
+		sec = ctrl_inb(RSECCNT);
+		min = ctrl_inb(RMINCNT);
+		hr  = ctrl_inb(RHRCNT);
+		wk  = ctrl_inb(RWKCNT);
+		day = ctrl_inb(RDAYCNT);
+		mon = ctrl_inb(RMONCNT);
+		yr  = ctrl_inw(RYRCNT);
+		yr100 = (yr >> 8);
+		yr &= 0xff;
+	} while ((ctrl_inb(RCR1) & RCR1_CF) != 0);
+
+	BCD_TO_BIN(yr100);
+	BCD_TO_BIN(yr);
+	BCD_TO_BIN(mon);
+	BCD_TO_BIN(day);
+	BCD_TO_BIN(hr);
+	BCD_TO_BIN(min);
+	BCD_TO_BIN(sec);
+
+	if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
+	    hr > 23 || min > 59 || sec > 59) {
+		printk(KERN_ERR
+		       "SH RTC: invalid value, resetting to 1 Jan 2000\n");
+		ctrl_outb(RCR2_RESET, RCR2);  /* Reset & Stop */
+		ctrl_outb(0, RSECCNT);
+		ctrl_outb(0, RMINCNT);
+		ctrl_outb(0, RHRCNT);
+		ctrl_outb(6, RWKCNT);
+		ctrl_outb(1, RDAYCNT);
+		ctrl_outb(1, RMONCNT);
+		ctrl_outw(0x2000, RYRCNT);
+		ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2);  /* Start */
+		goto again;
+	}
+
+	return mktime(yr100 * 100 + yr, mon, day, hr, min, sec);
+}
+
+static __init unsigned int get_cpu_hz(void)
+{
+	unsigned int count;
+	unsigned long __dummy;
+	unsigned long ctc_val_init, ctc_val;
+
+	/*
+	** Regardless the toolchain, force the compiler to use the
+	** arbitrary register r3 as a clock tick counter.
+	** NOTE: r3 must be in accordance with rtc_interrupt()
+	*/
+	register unsigned long long  __rtc_irq_flag __asm__ ("r3");
+
+	local_irq_enable();
+	do {} while (ctrl_inb(R64CNT) != 0);
+	ctrl_outb(RCR1_CIE, RCR1); /* Enable carry interrupt */
+
+	/*
+	 * r3 is arbitrary. CDC does not support "=z".
+	 */
+	ctc_val_init = 0xffffffff;
+	ctc_val = ctc_val_init;
+
+	asm volatile("gettr	tr0, %1\n\t"
+		     "putcon	%0, " __CTC "\n\t"
+		     "and	%2, r63, %2\n\t"
+		     "pta	$+4, tr0\n\t"
+		     "beq/l	%2, r63, tr0\n\t"
+		     "ptabs	%1, tr0\n\t"
+		     "getcon	" __CTC ", %0\n\t"
+		: "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
+		: "0" (0));
+	local_irq_disable();
+	/*
+	 * SH-3:
+	 * CPU clock = 4 stages * loop
+	 * tst    rm,rm      if id ex
+	 * bt/s   1b            if id ex
+	 * add    #1,rd            if id ex
+         *                            (if) pipe line stole
+	 * tst    rm,rm                  if id ex
+         * ....
+	 *
+	 *
+	 * SH-4:
+	 * CPU clock = 6 stages * loop
+	 * I don't know why.
+         * ....
+	 *
+	 * SH-5:
+	 * Use CTC register to count.  This approach returns the right value
+	 * even if the I-cache is disabled (e.g. whilst debugging.)
+	 *
+	 */
+
+	count = ctc_val_init - ctc_val; /* CTC counts down */
+
+#if defined (CONFIG_SH_SIMULATOR)
+	/*
+	 * Let's pretend we are a 5MHz SH-5 to avoid a too
+	 * little timer interval. Also to keep delay
+	 * calibration within a reasonable time.
+	 */
+	return 5000000;
+#else
+	/*
+	 * This really is count by the number of clock cycles
+         * by the ratio between a complete R64CNT
+         * wrap-around (128) and CUI interrupt being raised (64).
+	 */
+	return count*2;
+#endif
+}
+
+static irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	ctrl_outb(0, RCR1);	/* Disable Carry Interrupts */
+	regs->regs[3] = 1;	/* Using r3 */
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq0  = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+static struct irqaction irq1  = { rtc_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "rtc", NULL, NULL};
+
+void __init time_init(void)
+{
+	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+	unsigned long interval;
+	unsigned long frqcr, ifc, pfc;
+	static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
+#define bfc_table ifc_table	/* Same */
+#define pfc_table ifc_table	/* Same */
+
+	tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
+	if (!tmu_base) {
+		panic("Unable to remap TMU\n");
+	}
+
+	rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
+	if (!rtc_base) {
+		panic("Unable to remap RTC\n");
+	}
+
+	cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+	if (!cprc_base) {
+		panic("Unable to remap CPRC\n");
+	}
+
+	xtime.tv_sec = get_rtc_time();
+	xtime.tv_nsec = 0;
+
+	setup_irq(TIMER_IRQ, &irq0);
+	setup_irq(RTC_IRQ, &irq1);
+
+	/* Check how fast it is.. */
+	cpu_clock = get_cpu_hz();
+
+	/* Note careful order of operations to maintain reasonable precision and avoid overflow. */
+	scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
+
+	disable_irq(RTC_IRQ);
+
+	printk("CPU clock: %d.%02dMHz\n",
+	       (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
+	{
+		unsigned short bfc;
+		frqcr = ctrl_inl(FRQCR);
+		ifc  = ifc_table[(frqcr>> 6) & 0x0007];
+		bfc  = bfc_table[(frqcr>> 3) & 0x0007];
+		pfc  = pfc_table[(frqcr>> 12) & 0x0007];
+		master_clock = cpu_clock * ifc;
+		bus_clock = master_clock/bfc;
+	}
+
+	printk("Bus clock: %d.%02dMHz\n",
+	       (bus_clock/1000000), (bus_clock % 1000000)/10000);
+	module_clock = master_clock/pfc;
+	printk("Module clock: %d.%02dMHz\n",
+	       (module_clock/1000000), (module_clock % 1000000)/10000);
+	interval = (module_clock/(HZ*4));
+
+	printk("Interval = %ld\n", interval);
+
+	current_cpu_data.cpu_clock    = cpu_clock;
+	current_cpu_data.master_clock = master_clock;
+	current_cpu_data.bus_clock    = bus_clock;
+	current_cpu_data.module_clock = module_clock;
+
+	/* Start TMU0 */
+	ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
+	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+	ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
+	ctrl_outl(interval, TMU0_TCOR);
+	ctrl_outl(interval, TMU0_TCNT);
+	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+}
+
+void enter_deep_standby(void)
+{
+	/* Disable watchdog timer */
+	ctrl_outl(0xa5000000, WTCSR);
+	/* Configure deep standby on sleep */
+	ctrl_outl(0x03, STBCR);
+
+#ifdef CONFIG_SH_ALPHANUMERIC
+	{
+		extern void mach_alphanum(int position, unsigned char value);
+		extern void mach_alphanum_brightness(int setting);
+		char halted[] = "Halted. ";
+		int i;
+		mach_alphanum_brightness(6); /* dimmest setting above off */
+		for (i=0; i<8; i++) {
+			mach_alphanum(i, halted[i]);
+		}
+		asm __volatile__ ("synco");
+	}
+#endif
+
+	asm __volatile__ ("sleep");
+	asm __volatile__ ("synci");
+	asm __volatile__ ("nop");
+	asm __volatile__ ("nop");
+	asm __volatile__ ("nop");
+	asm __volatile__ ("nop");
+	panic("Unexpected wakeup!\n");
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+	return (unsigned long long)jiffies * (1000000000 / HZ);
+}
+