sh: Shuffle the board directories in to mach groups.

This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 143 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
new file mode 100644
index 000000000000..14bdd531f116
--- /dev/null
+++ b/arch/sh/boards/mach-edosk7705/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the EDOSK7705 specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o
+
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
new file mode 100644
index 000000000000..541cea2a652f
--- /dev/null
+++ b/arch/sh/boards/mach-edosk7705/io.c
@@ -0,0 +1,94 @@
+/*
+ * arch/sh/boards/renesas/edosk7705/io.c
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routines for Hitachi EDOSK7705 board.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/edosk7705/io.h>
+#include <asm/addrspace.h>
+
+#define SMC_IOADDR	0xA2000000
+
+#define maybebadio(name,port) \
+  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
+	 #name, (port), (__u32) __builtin_return_address(0))
+
+/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
+unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
+{
+     if (port >= 0x300 && port < 0x320) {
+	  /* SMC91C96 registers are 4 byte aligned rather than the
+	   * usual 2 byte!
+	   */
+	  return SMC_IOADDR + ( (port - 0x300) * 2);
+     }
+
+     maybebadio(sh_edosk7705_isa_port2addr, port);
+     return port;
+}
+
+/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
+ * registers causes problems. So we bit-shift the value and read / write
+ * in 2 byte chunks. Setting the low byte to 0 does not cause problems
+ * now as odd byte writes are only made on the bit mask / interrupt
+ * register. This may not be the case in future Mar-2003 SJD
+ */
+unsigned char sh_edosk7705_inb(unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320 && port & 0x01) {
+		return (volatile unsigned char)(generic_inw(port -1) >> 8);
+	}
+	return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
+}
+
+unsigned int sh_edosk7705_inl(unsigned long port)
+{
+	return *(volatile unsigned long *)port;
+}
+
+void sh_edosk7705_outb(unsigned char value, unsigned long port)
+{
+	if (port >= 0x300 && port < 0x320 && port & 0x01) {
+		generic_outw(((unsigned short)value << 8), port -1);
+		return;
+	}
+	*(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
+}
+
+void sh_edosk7705_outl(unsigned int value, unsigned long port)
+{
+	*(volatile unsigned long *)port = value;
+}
+
+void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned char *p = addr;
+	while (count--) *p++ = sh_edosk7705_inb(port);
+}
+
+void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned long *p = (unsigned long*)addr;
+	while (count--)
+		*p++ = *(volatile unsigned long *)port;
+}
+
+void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned char *p = (unsigned char*)addr;
+	while (count--) sh_edosk7705_outb(*p++, port);
+}
+
+void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned long *p = (unsigned long*)addr;
+	while (count--) sh_edosk7705_outl(*p++, port);
+}
+
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
new file mode 100644
index 000000000000..f076c45308dd
--- /dev/null
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -0,0 +1,43 @@
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <asm/machvec.h>
+#include <asm/edosk7705/io.h>
+
+static void __init sh_edosk7705_init_irq(void)
+{
+	/* This is the Ethernet interrupt */
+	make_imask_irq(0x09);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+	.mv_name		= "EDOSK7705",
+	.mv_nr_irqs		= 80,
+
+	.mv_inb			= sh_edosk7705_inb,
+	.mv_inl			= sh_edosk7705_inl,
+	.mv_outb		= sh_edosk7705_outb,
+	.mv_outl		= sh_edosk7705_outl,
+
+	.mv_inl_p		= sh_edosk7705_inl,
+	.mv_outl_p		= sh_edosk7705_outl,
+
+	.mv_insb		= sh_edosk7705_insb,
+	.mv_insl		= sh_edosk7705_insl,
+	.mv_outsb		= sh_edosk7705_outsb,
+	.mv_outsl		= sh_edosk7705_outsl,
+
+	.mv_isa_port2addr	= sh_edosk7705_isa_port2addr,
+	.mv_init_irq		= sh_edosk7705_init_irq,
+};