Merge tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "Notable changes:
   - new driver for NCT7802Y
   - support for TMP435, LM95233, LM95235, NCT6792D, and NXP LM75B
   - regulator support for PMBus chips, specifically LTX2978
   - support for humidity sensors to iio-hwmon bridge driver

* tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (21 commits)
  hwmon: (tmp401) Detect TMP435 on all addresses it supports
  hwmon: (lm75) Strengthen detect function
  hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans
  hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
  hwmon: (tmp401) Bail out from tmp401_probe() in case of write errors
  hwmon: (tmp401) Add support for TI TMP435
  hwmon: (lm95234) Add support for LM95233
  hwmon: (lm95245) Add support for LM95235
  hwmon: (ina2xx) bail-out from ina2xx_probe() in case of configuration errors
  hwmon: (nct6775) Add blank lines after declarations
  hwmon: (nct6775) Add support for NCT6792D
  hwmon: (nct6775) Documentation updates
  hwmon: (lm75) Add support for the NXP LM75B
  hwmon: Driver for Nuvoton NCT7802Y
  hwmon: (ibmpowernv) Convert to module_platform_driver
  hwmon: (ibmpowernv) Use platform 'id_table' to probe the device
  hwmon: (iio_hwmon) Add support for humidity sensors
  hwmon: (ltc2978) Add regulator support
  hwmon: (pmbus) Add regulator support
  hwmon: (pmbus) add helpers for byte write and read modify write
  ...

7 files changed, 114 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
new file mode 100644
index 000000000000..ed2f09dc2483
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -0,0 +1,39 @@
+ltc2978
+
+Required properties:
+- compatible: should contain one of:
+  * "lltc,ltc2974"
+  * "lltc,ltc2977"
+  * "lltc,ltc2978"
+  * "lltc,ltc3880"
+  * "lltc,ltc3883"
+  * "lltc,ltm4676"
+- reg: I2C slave address
+
+Optional properties:
+- regulators: A node that houses a sub-node for each regulator controlled by
+  the device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+
+Valid names of regulators depend on number of supplies supported per device:
+  * ltc2974 : vout0 - vout3
+  * ltc2977 : vout0 - vout7
+  * ltc2978 : vout0 - vout7
+  * ltc3880 : vout0 - vout1
+  * ltc3883 : vout0
+  * ltm4676 : vout0 - vout1
+
+Example:
+ltc2978@5e {
+	compatible = "lltc,ltc2978";
+	reg = <0x5e>;
+	regulators {
+		vout0 {
+			regulator-name = "FPGA-2.5V";
+		};
+		vout2 {
+			regulator-name = "FPGA-1.5V";
+		};
+	};
+};
diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
index c6a5ff1b4641..67691a0aa41d 100644
--- a/Documentation/hwmon/lm75
+++ b/Documentation/hwmon/lm75
@@ -53,6 +53,11 @@ Supported chips:
                http://www.ti.com/product/tmp75
                http://www.ti.com/product/tmp175
                http://www.ti.com/product/tmp275
+  * NXP LM75B
+    Prefix: 'lm75b'
+    Addresses scanned: none
+    Datasheet: Publicly available at the NXP website
+               http://www.nxp.com/documents/data_sheet/LM75B.pdf
 
 Author: Frodo Looijaard <frodol@dds.nl>
 
diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234
index a0e95ddfd372..32b777ef224c 100644
--- a/Documentation/hwmon/lm95234
+++ b/Documentation/hwmon/lm95234
@@ -2,6 +2,10 @@ Kernel driver lm95234
 =====================
 
 Supported chips:
+  * National Semiconductor / Texas Instruments LM95233
+    Addresses scanned: I2C 0x18, 0x2a, 0x2b
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/product/lm95233
   * National Semiconductor / Texas Instruments LM95234
     Addresses scanned: I2C 0x18, 0x4d, 0x4e
     Datasheet: Publicly available at the Texas Instruments website
@@ -13,11 +17,12 @@ Author: Guenter Roeck <linux@roeck-us.net>
 Description
 -----------
 
-LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management
-Bus (SMBus) interface and TrueTherm technology that can very accurately monitor
-the temperature of four remote diodes as well as its own temperature.
-The four remote diodes can be external devices such as microprocessors,
-graphics processors or diode-connected 2N3904s. The LM95234's TruTherm
+LM95233 and LM95234 are 11-bit digital temperature sensors with a 2-wire
+System Management Bus (SMBus) interface and TrueTherm technology
+that can very accurately monitor the temperature of two (LM95233)
+or four (LM95234) remote diodes as well as its own temperature.
+The remote diodes can be external devices such as microprocessors,
+graphics processors or diode-connected 2N3904s. The chip's TruTherm
 beta compensation technology allows sensing of 90 nm or 65 nm process
 thermal diodes accurately.
 
diff --git a/Documentation/hwmon/lm95245 b/Documentation/hwmon/lm95245
index 77eaf2812d25..d755901f58c4 100644
--- a/Documentation/hwmon/lm95245
+++ b/Documentation/hwmon/lm95245
@@ -2,10 +2,14 @@ Kernel driver lm95245
 ==================
 
 Supported chips:
-  * National Semiconductor LM95245
+  * TI LM95235
+    Addresses scanned: I2C 0x18, 0x29, 0x4c
+    Datasheet: Publicly available at the TI website
+               http://www.ti.com/lit/ds/symlink/lm95235.pdf
+  * TI / National Semiconductor LM95245
     Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d
-    Datasheet: Publicly available at the National Semiconductor website
-               http://www.national.com/mpf/LM/LM95245.html
+    Datasheet: Publicly available at the TI website
+               http://www.ti.com/lit/ds/symlink/lm95245.pdf
 
 
 Author: Alexander Stein <alexander.stein@systec-electronic.com>
@@ -13,10 +17,10 @@ Author: Alexander Stein <alexander.stein@systec-electronic.com>
 Description
 -----------
 
-The LM95245 is an 11-bit digital temperature sensor with a 2-wire System
+LM95235 and LM95245 are 11-bit digital temperature sensors with a 2-wire System
 Management Bus (SMBus) interface and TruTherm technology that can monitor
 the temperature of a remote diode as well as its own temperature.
-The LM95245 can be used to very accurately monitor the temperature of
+The chips can be used to very accurately monitor the temperature of
 external devices such as microprocessors.
 
 All temperature values are given in millidegrees Celsius. Local temperature
diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775
index 4e9ef60e8c6c..f0dd3d2fec96 100644
--- a/Documentation/hwmon/nct6775
+++ b/Documentation/hwmon/nct6775
@@ -8,11 +8,15 @@ Kernel driver NCT6775
 =====================
 
 Supported chips:
+  * Nuvoton NCT6102D/NCT6104D/NCT6106D
+    Prefix: 'nct6106'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Available from the Nuvoton web site
   * Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I
     Prefix: 'nct6775'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: Available from Nuvoton upon request
-  * Nuvoton NCT5577D/NCT6776D/NCT6776F
+  * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F
     Prefix: 'nct6776'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: Available from Nuvoton upon request
@@ -20,6 +24,14 @@ Supported chips:
     Prefix: 'nct6779'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: Available from Nuvoton upon request
+  * Nuvoton NCT6791D
+    Prefix: 'nct6791'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Available from Nuvoton upon request
+  * Nuvoton NCT6792D
+    Prefix: 'nct6792'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Available from Nuvoton upon request
 
 Authors:
         Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802
new file mode 100644
index 000000000000..2e00f5e344bc
--- /dev/null
+++ b/Documentation/hwmon/nct7802
@@ -0,0 +1,32 @@
+Kernel driver nct7802
+=====================
+
+Supported chips:
+  * Nuvoton NCT7802Y
+    Prefix: 'nct7802'
+    Addresses scanned: I2C 0x28..0x2f
+    Datasheet: Available from Nuvoton web site
+
+Authors:
+        Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for the Nuvoton NCT7802Y hardware monitoring
+chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
+speed sensors.
+
+The chip also supports intelligent fan speed control. This functionality is
+not currently supported by the driver.
+
+Tested Boards and BIOS Versions
+-------------------------------
+
+The driver has been reported to work with the following boards and
+BIOS versions.
+
+Board			BIOS version
+---------------------------------------------------------------
+Kontron COMe-bSC2	CHR2E934.001.GGO
+Kontron COMe-bIP2	CCR2E212
diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401
index f91e3fa7e5ec..8eb88e974055 100644
--- a/Documentation/hwmon/tmp401
+++ b/Documentation/hwmon/tmp401
@@ -18,6 +18,10 @@ Supported chips:
     Prefix: 'tmp432'
     Addresses scanned: I2C 0x4c, 0x4d
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
+  * Texas Instruments TMP435
+    Prefix: 'tmp435'
+    Addresses scanned: I2C 0x37, 0x48 - 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
 
 Authors:
          Hans de Goede <hdegoede@redhat.com>
@@ -27,8 +31,8 @@ Description
 -----------
 
 This driver implements support for Texas Instruments TMP401, TMP411,
-TMP431, and TMP432 chips. These chips implement one or two remote and
-one local temperature sensors. Temperature is measured in degrees
+TMP431, TMP432 and TMP435 chips. These chips implement one or two remote
+and one local temperature sensors. Temperature is measured in degrees
 Celsius. Resolution of the remote sensor is 0.0625 degree. Local
 sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
 supported by the driver so far, so using the default resolution of 0.5