Merge LKMM and RCU commits

12 files changed, 191 insertions, 89 deletions

diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html
index 18f179807563..c30c1957c7e6 100644
--- a/Documentation/RCU/Design/Data-Structures/Data-Structures.html
+++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html
@@ -155,8 +155,7 @@ keeping lock contention under control at all tree levels regardless
 of the level of loading on the system.
 
 </p><p>RCU updaters wait for normal grace periods by registering
-RCU callbacks, either directly via <tt>call_rcu()</tt> and
-friends (namely <tt>call_rcu_bh()</tt> and <tt>call_rcu_sched()</tt>),
+RCU callbacks, either directly via <tt>call_rcu()</tt>
 or indirectly via <tt>synchronize_rcu()</tt> and friends.
 RCU callbacks are represented by <tt>rcu_head</tt> structures,
 which are queued on <tt>rcu_data</tt> structures while they are
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html
index 19e7a5fb6b73..57300db4b5ff 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html
@@ -56,6 +56,7 @@ sections.
 RCU-preempt Expedited Grace Periods</a></h2>
 
 <p>
+<tt>CONFIG_PREEMPT=y</tt> kernels implement RCU-preempt.
 The overall flow of the handling of a given CPU by an RCU-preempt
 expedited grace period is shown in the following diagram:
 
@@ -139,6 +140,7 @@ or offline, among other things.
 RCU-sched Expedited Grace Periods</a></h2>
 
 <p>
+<tt>CONFIG_PREEMPT=n</tt> kernels implement RCU-sched.
 The overall flow of the handling of a given CPU by an RCU-sched
 expedited grace period is shown in the following diagram:
 
@@ -146,7 +148,7 @@ expedited grace period is shown in the following diagram:
 
 <p>
 As with RCU-preempt, RCU-sched's
-<tt>synchronize_sched_expedited()</tt> ignores offline and
+<tt>synchronize_rcu_expedited()</tt> ignores offline and
 idle CPUs, again because they are in remotely detectable
 quiescent states.
 However, because the
diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html
index 8d21af02b1f0..c64f8d26609f 100644
--- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html
+++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html
@@ -34,12 +34,11 @@ Similarly, any code that happens before the beginning of a given RCU grace
 period is guaranteed to see the effects of all accesses following the end
 of that grace period that are within RCU read-side critical sections.
 
-<p>This guarantee is particularly pervasive for <tt>synchronize_sched()</tt>,
-for which RCU-sched read-side critical sections include any region
+<p>Note well that RCU-sched read-side critical sections include any region
 of code for which preemption is disabled.
 Given that each individual machine instruction can be thought of as
 an extremely small region of preemption-disabled code, one can think of
-<tt>synchronize_sched()</tt> as <tt>smp_mb()</tt> on steroids.
+<tt>synchronize_rcu()</tt> as <tt>smp_mb()</tt> on steroids.
 
 <p>RCU updaters use this guarantee by splitting their updates into
 two phases, one of which is executed before the grace period and
diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt
index 687777f83b23..881353fd5bff 100644
--- a/Documentation/RCU/NMI-RCU.txt
+++ b/Documentation/RCU/NMI-RCU.txt
@@ -81,18 +81,19 @@ currently executing on some other CPU.  We therefore cannot free
 up any data structures used by the old NMI handler until execution
 of it completes on all other CPUs.
 
-One way to accomplish this is via synchronize_sched(), perhaps as
+One way to accomplish this is via synchronize_rcu(), perhaps as
 follows:
 
 	unset_nmi_callback();
-	synchronize_sched();
+	synchronize_rcu();
 	kfree(my_nmi_data);
 
-This works because synchronize_sched() blocks until all CPUs complete
-any preemption-disabled segments of code that they were executing.
-Since NMI handlers disable preemption, synchronize_sched() is guaranteed
+This works because (as of v4.20) synchronize_rcu() blocks until all
+CPUs complete any preemption-disabled segments of code that they were
+executing.
+Since NMI handlers disable preemption, synchronize_rcu() is guaranteed
 not to return until all ongoing NMI handlers exit.  It is therefore safe
-to free up the handler's data as soon as synchronize_sched() returns.
+to free up the handler's data as soon as synchronize_rcu() returns.
 
 Important note: for this to work, the architecture in question must
 invoke nmi_enter() and nmi_exit() on NMI entry and exit, respectively.
diff --git a/Documentation/RCU/UP.txt b/Documentation/RCU/UP.txt
index 90ec5341ee98..53bde717017b 100644
--- a/Documentation/RCU/UP.txt
+++ b/Documentation/RCU/UP.txt
@@ -86,10 +86,8 @@ even on a UP system.  So do not do it!  Even on a UP system, the RCU
 infrastructure -must- respect grace periods, and -must- invoke callbacks
 from a known environment in which no locks are held.
 
-It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return
-immediately on an UP system.  It is also safe for synchronize_rcu()
-to return immediately on UP systems, except when running preemptable
-RCU.
+Note that it -is- safe for synchronize_rcu() to return immediately on
+UP systems, including !PREEMPT SMP builds running on UP systems.
 
 Quick Quiz #3: Why can't synchronize_rcu() return immediately on
 	UP systems running preemptable RCU?
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 6f469864d9f5..e98ff261a438 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -182,16 +182,13 @@ over a rather long period of time, but improvements are always welcome!
 		when publicizing a pointer to a structure that can
 		be traversed by an RCU read-side critical section.
 
-5.	If call_rcu(), or a related primitive such as call_rcu_bh(),
-	call_rcu_sched(), or call_srcu() is used, the callback function
-	will be called from softirq context.  In particular, it cannot
-	block.
+5.	If call_rcu() or call_srcu() is used, the callback function will
+	be called from softirq context.  In particular, it cannot block.
 
-6.	Since synchronize_rcu() can block, it cannot be called from
-	any sort of irq context.  The same rule applies for
-	synchronize_rcu_bh(), synchronize_sched(), synchronize_srcu(),
-	synchronize_rcu_expedited(), synchronize_rcu_bh_expedited(),
-	synchronize_sched_expedite(), and synchronize_srcu_expedited().
+6.	Since synchronize_rcu() can block, it cannot be called
+	from any sort of irq context.  The same rule applies
+	for synchronize_srcu(), synchronize_rcu_expedited(), and
+	synchronize_srcu_expedited().
 
 	The expedited forms of these primitives have the same semantics
 	as the non-expedited forms, but expediting is both expensive and
@@ -212,20 +209,20 @@ over a rather long period of time, but improvements are always welcome!
 	of the system, especially to real-time workloads running on
 	the rest of the system.
 
-7.	If the updater uses call_rcu() or synchronize_rcu(), then the
-	corresponding readers must use rcu_read_lock() and
-	rcu_read_unlock().  If the updater uses call_rcu_bh() or
-	synchronize_rcu_bh(), then the corresponding readers must
-	use rcu_read_lock_bh() and rcu_read_unlock_bh().  If the
-	updater uses call_rcu_sched() or synchronize_sched(), then
-	the corresponding readers must disable preemption, possibly
-	by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
-	If the updater uses synchronize_srcu() or call_srcu(), then
-	the corresponding readers must use srcu_read_lock() and
+7.	As of v4.20, a given kernel implements only one RCU flavor,
+	which is RCU-sched for PREEMPT=n and RCU-preempt for PREEMPT=y.
+	If the updater uses call_rcu() or synchronize_rcu(),
+	then the corresponding readers my use rcu_read_lock() and
+	rcu_read_unlock(), rcu_read_lock_bh() and rcu_read_unlock_bh(),
+	or any pair of primitives that disables and re-enables preemption,
+	for example, rcu_read_lock_sched() and rcu_read_unlock_sched().
+	If the updater uses synchronize_srcu() or call_srcu(),
+	then the corresponding readers must use srcu_read_lock() and
 	srcu_read_unlock(), and with the same srcu_struct.  The rules for
 	the expedited primitives are the same as for their non-expedited
 	counterparts.  Mixing things up will result in confusion and
-	broken kernels.
+	broken kernels, and has even resulted in an exploitable security
+	issue.
 
 	One exception to this rule: rcu_read_lock() and rcu_read_unlock()
 	may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh()
@@ -288,8 +285,7 @@ over a rather long period of time, but improvements are always welcome!
 	d.	Periodically invoke synchronize_rcu(), permitting a limited
 		number of updates per grace period.
 
-	The same cautions apply to call_rcu_bh(), call_rcu_sched(),
-	call_srcu(), and kfree_rcu().
+	The same cautions apply to call_srcu() and kfree_rcu().
 
 	Note that although these primitives do take action to avoid memory
 	exhaustion when any given CPU has too many callbacks, a determined
@@ -322,7 +318,7 @@ over a rather long period of time, but improvements are always welcome!
 
 11.	Any lock acquired by an RCU callback must be acquired elsewhere
 	with softirq disabled, e.g., via spin_lock_irqsave(),
-	spin_lock_bh(), etc.  Failing to disable irq on a given
+	spin_lock_bh(), etc.  Failing to disable softirq on a given
 	acquisition of that lock will result in deadlock as soon as
 	the RCU softirq handler happens to run your RCU callback while
 	interrupting that acquisition's critical section.
@@ -335,13 +331,16 @@ over a rather long period of time, but improvements are always welcome!
 	must use whatever locking or other synchronization is required
 	to safely access and/or modify that data structure.
 
-	RCU callbacks are -usually- executed on the same CPU that executed
-	the corresponding call_rcu(), call_rcu_bh(), or call_rcu_sched(),
-	but are by -no- means guaranteed to be.  For example, if a given
-	CPU goes offline while having an RCU callback pending, then that
-	RCU callback will execute on some surviving CPU.  (If this was
-	not the case, a self-spawning RCU callback would prevent the
-	victim CPU from ever going offline.)
+	Do not assume that RCU callbacks will be executed on the same
+	CPU that executed the corresponding call_rcu() or call_srcu().
+	For example, if a given CPU goes offline while having an RCU
+	callback pending, then that RCU callback will execute on some
+	surviving CPU.	(If this was not the case, a self-spawning RCU
+	callback would prevent the victim CPU from ever going offline.)
+	Furthermore, CPUs designated by rcu_nocbs= might well -always-
+	have their RCU callbacks executed on some other CPUs, in fact,
+	for some  real-time workloads, this is the whole point of using
+	the rcu_nocbs= kernel boot parameter.
 
 13.	Unlike other forms of RCU, it -is- permissible to block in an
 	SRCU read-side critical section (demarked by srcu_read_lock()
@@ -381,11 +380,11 @@ over a rather long period of time, but improvements are always welcome!
 
 	SRCU's expedited primitive (synchronize_srcu_expedited())
 	never sends IPIs to other CPUs, so it is easier on
-	real-time workloads than is synchronize_rcu_expedited(),
-	synchronize_rcu_bh_expedited() or synchronize_sched_expedited().
+	real-time workloads than is synchronize_rcu_expedited().
 
-	Note that rcu_dereference() and rcu_assign_pointer() relate to
-	SRCU just as they do to other forms of RCU.
+	Note that rcu_assign_pointer() relates to SRCU just as it does to
+	other forms of RCU, but instead of rcu_dereference() you should
+	use srcu_dereference() in order to avoid lockdep splats.
 
 14.	The whole point of call_rcu(), synchronize_rcu(), and friends
 	is to wait until all pre-existing readers have finished before
@@ -405,6 +404,9 @@ over a rather long period of time, but improvements are always welcome!
 	read-side critical sections.  It is the responsibility of the
 	RCU update-side primitives to deal with this.
 
+	For SRCU readers, you can use smp_mb__after_srcu_read_unlock()
+	immediately after an srcu_read_unlock() to get a full barrier.
+
 16.	Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
 	__rcu sparse checks to validate your RCU code.	These can help
 	find problems as follows:
@@ -428,22 +430,19 @@ over a rather long period of time, but improvements are always welcome!
 	These debugging aids can help you find problems that are
 	otherwise extremely difficult to spot.
 
-17.	If you register a callback using call_rcu(), call_rcu_bh(),
-	call_rcu_sched(), or call_srcu(), and pass in a function defined
-	within a loadable module, then it in necessary to wait for
-	all pending callbacks to be invoked after the last invocation
-	and before unloading that module.  Note that it is absolutely
-	-not- sufficient to wait for a grace period!  The current (say)
-	synchronize_rcu() implementation waits only for all previous
-	callbacks registered on the CPU that synchronize_rcu() is running
-	on, but it is -not- guaranteed to wait for callbacks registered
-	on other CPUs.
+17.	If you register a callback using call_rcu() or call_srcu(), and
+	pass in a function defined within a loadable module, then it in
+	necessary to wait for all pending callbacks to be invoked after
+	the last invocation and before unloading that module.  Note that
+	it is absolutely -not- sufficient to wait for a grace period!
+	The current (say) synchronize_rcu() implementation is -not-
+	guaranteed to wait for callbacks registered on other CPUs.
+	Or even on the current CPU if that CPU recently went offline
+	and came back online.
 
 	You instead need to use one of the barrier functions:
 
 	o	call_rcu() -> rcu_barrier()
-	o	call_rcu_bh() -> rcu_barrier()
-	o	call_rcu_sched() -> rcu_barrier()
 	o	call_srcu() -> srcu_barrier()
 
 	However, these barrier functions are absolutely -not- guaranteed
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index 721b3e426515..c818cf65c5a9 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -52,10 +52,10 @@ o	If I am running on a uniprocessor kernel, which can only do one
 o	How can I see where RCU is currently used in the Linux kernel?
 
 	Search for "rcu_read_lock", "rcu_read_unlock", "call_rcu",
-	"rcu_read_lock_bh", "rcu_read_unlock_bh", "call_rcu_bh",
-	"srcu_read_lock", "srcu_read_unlock", "synchronize_rcu",
-	"synchronize_net", "synchronize_srcu", and the other RCU
-	primitives.  Or grab one of the cscope databases from:
+	"rcu_read_lock_bh", "rcu_read_unlock_bh", "srcu_read_lock",
+	"srcu_read_unlock", "synchronize_rcu", "synchronize_net",
+	"synchronize_srcu", and the other RCU primitives.  Or grab one
+	of the cscope databases from:
 
 	http://www.rdrop.com/users/paulmck/RCU/linuxusage/rculocktab.html
 
diff --git a/Documentation/RCU/rcu_dereference.txt b/Documentation/RCU/rcu_dereference.txt
index ab96227bad42..bf699e8cfc75 100644
--- a/Documentation/RCU/rcu_dereference.txt
+++ b/Documentation/RCU/rcu_dereference.txt
@@ -351,3 +351,106 @@ garbage values.
 
 In short, rcu_dereference() is -not- optional when you are going to
 dereference the resulting pointer.
+
+
+WHICH MEMBER OF THE rcu_dereference() FAMILY SHOULD YOU USE?
+
+First, please avoid using rcu_dereference_raw() and also please avoid
+using rcu_dereference_check() and rcu_dereference_protected() with a
+second argument with a constant value of 1 (or true, for that matter).
+With that caution out of the way, here is some guidance for which
+member of the rcu_dereference() to use in various situations:
+
+1.	If the access needs to be within an RCU read-side critical
+	section, use rcu_dereference().  With the new consolidated
+	RCU flavors, an RCU read-side critical section is entered
+	using rcu_read_lock(), anything that disables bottom halves,
+	anything that disables interrupts, or anything that disables
+	preemption.
+
+2.	If the access might be within an RCU read-side critical section
+	on the one hand, or protected by (say) my_lock on the other,
+	use rcu_dereference_check(), for example:
+
+		p1 = rcu_dereference_check(p->rcu_protected_pointer,
+					   lockdep_is_held(&my_lock));
+
+
+3.	If the access might be within an RCU read-side critical section
+	on the one hand, or protected by either my_lock or your_lock on
+	the other, again use rcu_dereference_check(), for example:
+
+		p1 = rcu_dereference_check(p->rcu_protected_pointer,
+					   lockdep_is_held(&my_lock) ||
+					   lockdep_is_held(&your_lock));
+
+4.	If the access is on the update side, so that it is always protected
+	by my_lock, use rcu_dereference_protected():
+
+		p1 = rcu_dereference_protected(p->rcu_protected_pointer,
+					       lockdep_is_held(&my_lock));
+
+	This can be extended to handle multiple locks as in #3 above,
+	and both can be extended to check other conditions as well.
+
+5.	If the protection is supplied by the caller, and is thus unknown
+	to this code, that is the rare case when rcu_dereference_raw()
+	is appropriate.  In addition, rcu_dereference_raw() might be
+	appropriate when the lockdep expression would be excessively
+	complex, except that a better approach in that case might be to
+	take a long hard look at your synchronization design.  Still,
+	there are data-locking cases where any one of a very large number
+	of locks or reference counters suffices to protect the pointer,
+	so rcu_dereference_raw() does have its place.
+
+	However, its place is probably quite a bit smaller than one
+	might expect given the number of uses in the current kernel.
+	Ditto for its synonym, rcu_dereference_check( ... , 1), and
+	its close relative, rcu_dereference_protected(... , 1).
+
+
+SPARSE CHECKING OF RCU-PROTECTED POINTERS
+
+The sparse static-analysis tool checks for direct access to RCU-protected
+pointers, which can result in "interesting" bugs due to compiler
+optimizations involving invented loads and perhaps also load tearing.
+For example, suppose someone mistakenly does something like this:
+
+	p = q->rcu_protected_pointer;
+	do_something_with(p->a);
+	do_something_else_with(p->b);
+
+If register pressure is high, the compiler might optimize "p" out
+of existence, transforming the code to something like this:
+
+	do_something_with(q->rcu_protected_pointer->a);
+	do_something_else_with(q->rcu_protected_pointer->b);
+
+This could fatally disappoint your code if q->rcu_protected_pointer
+changed in the meantime.  Nor is this a theoretical problem:  Exactly
+this sort of bug cost Paul E. McKenney (and several of his innocent
+colleagues) a three-day weekend back in the early 1990s.
+
+Load tearing could of course result in dereferencing a mashup of a pair
+of pointers, which also might fatally disappoint your code.
+
+These problems could have been avoided simply by making the code instead
+read as follows:
+
+	p = rcu_dereference(q->rcu_protected_pointer);
+	do_something_with(p->a);
+	do_something_else_with(p->b);
+
+Unfortunately, these sorts of bugs can be extremely hard to spot during
+review.  This is where the sparse tool comes into play, along with the
+"__rcu" marker.  If you mark a pointer declaration, whether in a structure
+or as a formal parameter, with "__rcu", which tells sparse to complain if
+this pointer is accessed directly.  It will also cause sparse to complain
+if a pointer not marked with "__rcu" is accessed using rcu_dereference()
+and friends.  For example, ->rcu_protected_pointer might be declared as
+follows:
+
+	struct foo __rcu *rcu_protected_pointer;
+
+Use of "__rcu" is opt-in.  If you choose not to use it, then you should
+ignore the sparse warnings.
diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt
index 5d7759071a3e..a2782df69732 100644
--- a/Documentation/RCU/rcubarrier.txt
+++ b/Documentation/RCU/rcubarrier.txt
@@ -83,16 +83,15 @@ Pseudo-code using rcu_barrier() is as follows:
    2. Execute rcu_barrier().
    3. Allow the module to be unloaded.
 
-There are also rcu_barrier_bh(), rcu_barrier_sched(), and srcu_barrier()
-functions for the other flavors of RCU, and you of course must match
-the flavor of rcu_barrier() with that of call_rcu().  If your module
-uses multiple flavors of call_rcu(), then it must also use multiple
+There is also an srcu_barrier() function for SRCU, and you of course
+must match the flavor of rcu_barrier() with that of call_rcu().  If your
+module uses multiple flavors of call_rcu(), then it must also use multiple
 flavors of rcu_barrier() when unloading that module.  For example, if
-it uses call_rcu_bh(), call_srcu() on srcu_struct_1, and call_srcu() on
+it uses call_rcu(), call_srcu() on srcu_struct_1, and call_srcu() on
 srcu_struct_2(), then the following three lines of code will be required
 when unloading:
 
- 1 rcu_barrier_bh();
+ 1 rcu_barrier();
  2 srcu_barrier(&srcu_struct_1);
  3 srcu_barrier(&srcu_struct_2);
 
@@ -185,12 +184,12 @@ module invokes call_rcu() from timers, you will need to first cancel all
 the timers, and only then invoke rcu_barrier() to wait for any remaining
 RCU callbacks to complete.
 
-Of course, if you module uses call_rcu_bh(), you will need to invoke
-rcu_barrier_bh() before unloading.  Similarly, if your module uses
-call_rcu_sched(), you will need to invoke rcu_barrier_sched() before
-unloading.  If your module uses call_rcu(), call_rcu_bh(), -and-
-call_rcu_sched(), then you will need to invoke each of rcu_barrier(),
-rcu_barrier_bh(), and rcu_barrier_sched().
+Of course, if you module uses call_rcu(), you will need to invoke
+rcu_barrier() before unloading.  Similarly, if your module uses
+call_srcu(), you will need to invoke srcu_barrier() before unloading,
+and on the same srcu_struct structure.  If your module uses call_rcu()
+-and- call_srcu(), then you will need to invoke rcu_barrier() -and-
+srcu_barrier().
 
 
 Implementing rcu_barrier()
@@ -223,8 +222,8 @@ shown below. Note that the final "1" in on_each_cpu()'s argument list
 ensures that all the calls to rcu_barrier_func() will have completed
 before on_each_cpu() returns. Line 9 then waits for the completion.
 
-This code was rewritten in 2008 to support rcu_barrier_bh() and
-rcu_barrier_sched() in addition to the original rcu_barrier().
+This code was rewritten in 2008 and several times thereafter, but this
+still gives the general idea.
 
 The rcu_barrier_func() runs on each CPU, where it invokes call_rcu()
 to post an RCU callback, as follows:
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 1ace20815bb1..981651a8b65d 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -310,7 +310,7 @@ reader, updater, and reclaimer.
 
 
 	    rcu_assign_pointer()
-	    			    +--------+
+	                            +--------+
 	    +---------------------->| reader |---------+
 	    |                       +--------+         |
 	    |                           |              |
@@ -318,12 +318,12 @@ reader, updater, and reclaimer.
 	    |                           |              | rcu_read_lock()
 	    |                           |              | rcu_read_unlock()
 	    |        rcu_dereference()  |              |
-       +---------+                      |              |
-       | updater |<---------------------+              |
-       +---------+                                     V
+	    +---------+                 |              |
+	    | updater |<----------------+              |
+	    +---------+                                V
 	    |                                    +-----------+
 	    +----------------------------------->| reclaimer |
-	    				         +-----------+
+	                                         +-----------+
 	      Defer:
 	      synchronize_rcu() & call_rcu()
 
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 2b8ee90bb644..d377a2166b79 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3623,7 +3623,9 @@
 				see CONFIG_RAS_CEC help text.
 
 	rcu_nocbs=	[KNL]
-			The argument is a cpu list, as described above.
+			The argument is a cpu list, as described above,
+			except that the string "all" can be used to
+			specify every CPU on the system.
 
 			In kernels built with CONFIG_RCU_NOCB_CPU=y, set
 			the specified list of CPUs to be no-callback CPUs.
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 10f4499e677c..ee60e519438a 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -243,10 +243,10 @@ Optimization
 ^^^^^^^^^^^^
 
 The Kprobe-optimizer doesn't insert the jump instruction immediately;
-rather, it calls synchronize_sched() for safety first, because it's
+rather, it calls synchronize_rcu() for safety first, because it's
 possible for a CPU to be interrupted in the middle of executing the
-optimized region [3]_.  As you know, synchronize_sched() can ensure
-that all interruptions that were active when synchronize_sched()
+optimized region [3]_.  As you know, synchronize_rcu() can ensure
+that all interruptions that were active when synchronize_rcu()
 was called are done, but only if CONFIG_PREEMPT=n.  So, this version
 of kprobe optimization supports only kernels with CONFIG_PREEMPT=n [4]_.