Merge tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Add support for "input-schmitt-microvolt" property, as used in the
     Sophgo SoC

  New drivers:

   - Mobileye EyeQ5 pin controller, I think this is an automotive SoC

   - Rockchip rk3576 pin control support

   - Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000

  Improvements:

   - Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
     few other drivers"

* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
  pinctrl: intel: Constify struct intel_pinctrl parameter
  pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
  pinctrl: baytrail: Drop duplicate return statement
  pinctrl: intel: Inline intel_gpio_community_irq_handler()
  dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
  pinctrl: madera: Simplify with dev_err_probe()
  pinctrl: k210: Use devm_clk_get_enabled() helpers
  pinctrl: Join split messages and remove double whitespace
  pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
  pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
  pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
  pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
  pinctrl: sunxi: Use devm_clk_get_enabled() helpers
  pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
  pinctrl: stmfx: Use string_choices API instead of ternary operator
  pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
  pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
  pinctrl: intel: Constify intel_get_community() returned object
  pinctrl: intel: Implement high impedance support
  pinctrl: intel: Add __intel_gpio_get_direction() helper
  ...

16 files changed, 613 insertions, 747 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
deleted file mode 100644
index 5f00604bf48c..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
+++ /dev/null
@@ -1,242 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mobileye EyeQ5 pin controller
-
-description: >
-  The EyeQ5 pin controller handles the two pin banks of the system. It belongs
-  to a system-controller block called OLB.
-
-  Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
-  muxing supports two functions for each pin: first is GPIO, second is
-  pin-dependent.
-
-  Pins and groups are bijective.
-
-maintainers:
-  - Grégory Clement <gregory.clement@bootlin.com>
-  - Théo Lebrun <theo.lebrun@bootlin.com>
-  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
-
-$ref: pinctrl.yaml#
-
-properties:
-  compatible:
-    enum:
-      - mobileye,eyeq5-pinctrl
-
-  reg:
-    maxItems: 1
-
-patternProperties:
-  "-pins?$":
-    type: object
-    description: Pin muxing configuration.
-    $ref: pinmux-node.yaml#
-    additionalProperties: false
-    properties:
-      pins: true
-      function:
-        enum: [gpio,
-               # Bank A
-               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
-               spi1, refclk0,
-               # Bank B
-               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-    required:
-      - pins
-      - function
-    allOf:
-      - if:
-          properties:
-            function:
-              const: gpio
-        then:
-          properties:
-            pins:
-              items: # PA0 - PA28, PB0 - PB22
-                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
-      - if:
-          properties:
-            function:
-              const: timer0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA0, PA1]
-      - if:
-          properties:
-            function:
-              const: timer1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA2, PA3]
-      - if:
-          properties:
-            function:
-              const: timer2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA4, PA5]
-      - if:
-          properties:
-            function:
-              const: timer5
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA6, PA7, PA8, PA9]
-      - if:
-          properties:
-            function:
-              const: uart0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA10, PA11]
-      - if:
-          properties:
-            function:
-              const: uart1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA12, PA13]
-      - if:
-          properties:
-            function:
-              const: can0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA14, PA15]
-      - if:
-          properties:
-            function:
-              const: can1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA16, PA17]
-      - if:
-          properties:
-            function:
-              const: spi0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA18, PA19, PA20, PA21, PA22]
-      - if:
-          properties:
-            function:
-              const: spi1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA23, PA24, PA25, PA26, PA27]
-      - if:
-          properties:
-            function:
-              const: refclk0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA28]
-      - if:
-          properties:
-            function:
-              const: timer3
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB0, PB1]
-      - if:
-          properties:
-            function:
-              const: timer4
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB2, PB3]
-      - if:
-          properties:
-            function:
-              const: timer6
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB4, PB5, PB6, PB7]
-      - if:
-          properties:
-            function:
-              const: uart2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB8, PB9]
-      - if:
-          properties:
-            function:
-              const: can2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB10, PB11]
-      - if:
-          properties:
-            function:
-              const: spi2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB12, PB13, PB14, PB15, PB16]
-      - if:
-          properties:
-            function:
-              const: spi3
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB17, PB18, PB19, PB20, PB21]
-      - if:
-          properties:
-            function:
-              const: mclk0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB22]
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
index 814b9598edd1..8cd1f442240e 100644
--- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -71,51 +71,49 @@ patternProperties:
           One or more groups of pins to mux to a certain function
         items:
           enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
-                  smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
-                  smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
-                  smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
-                  spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
-                  spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
-                  bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
-                  r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
-                  fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
-                  fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
-                  pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
-                  ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
-                  smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
-                  sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
-                  mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
-                  scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
-                  smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
-                  spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
-                  wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
-                  hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
-                  bu4b, bu5, bu5b, bu6, gpo187 ]
+                  smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4b, smb4c, smb15,
+                  smb16, smb17, smb18, smb19, smb20, smb21, smb22, smb23,
+                  smb23b, smb4d, smb14, smb5, smb4, smb3, spi0cs1, spi0cs2,
+                  spi0cs3, spi1cs0, spi1cs1, spi1cs2, spi1cs3, spi1cs23, smb3c,
+                  smb3b, bmcuart0a, uart1, jtag2, bmcuart1, uart2, sg1mdio,
+                  bmcuart0b, r1err, r1md, r1oen, r2oen, rmii3, r3oen, smb3d,
+                  fanin0, fanin1, fanin2, fanin3, fanin4, fanin5, fanin6,
+                  fanin7, fanin8, fanin9, fanin10, fanin11, fanin12, fanin13,
+                  fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, r2, r2err, r2md,
+                  r3rxer, ga20kbc, smb5d, lpc, espi, rg2, ddr, i3c0, i3c1,
+                  i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2, smb2c, smb2b, smb1c,
+                  smb1b, smb8, smb9, smb10, smb11, sd1, sd1pwr, pwm4, pwm5,
+                  pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd,
+                  mmcrst, clkout, serirq, scipme, smi, smb6, smb6b, smb6c,
+                  smb6d, smb7, smb7b, smb7c, smb7d, spi1, faninx, r1, spi3, 
+                  spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c,
+                  smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13,
+                  spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
+                  hgpio5, hgpio6, hgpio7, bu4, bu4b, bu5, bu5b, bu6, gpo187 ]
 
       function:
         description:
           The function that a group of pins is muxed to
-        enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
-                smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
-                smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
-                smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
-                spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
-                spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
-                bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
-                r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
-                fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
+        enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, smb5b,
+                smb5c, lkgpo0, pspi, jm1, jm2, smb4b, smb4c, smb15, smb16,
+                smb17, smb18, smb19, smb20, smb21, smb22, smb23, smb23b, smb4d,
+                smb14, smb5, smb4, smb3, spi0cs1, spi0cs2, spi0cs3, spi1cs0,
+                spi1cs1, spi1cs2, spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a,
+                uart1, jtag2, bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md,
+                r1oen, r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2,
+                fanin3, fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
                 fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
                 pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
                 ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
                 smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
                 sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
-                mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
-                scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
-                smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
-                spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
-                wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
-                hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
-                bu4b, bu5, bu5b, bu6, gpo187 ]
+                mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, scipme, smi,
+                smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c, smb7d, spi1,
+                faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi,
+                smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2,
+                smb12, smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2,
+                hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4, bu4b, bu5, bu5b,
+                bu6, gpo187 ]
 
     dependencies:
       groups: [ function ]
diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
index d0af21a564b4..cbfcf215e571 100644
--- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -96,6 +96,9 @@ properties:
     type: boolean
     description: disable schmitt-trigger mode
 
+  input-schmitt-microvolt:
+    description: threshold strength for schmitt-trigger
+
   input-debounce:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Takes the debounce time in usec as argument or 0 to disable
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
deleted file mode 100644
index 4e90ddd77784..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Qualcomm APQ8064 TLMM block
-
-Required properties:
-- compatible: "qcom,apq8064-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-                The first cell is the gpio pin number and the
-                second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Qualcomm's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
- output-low, output-high.
-
-Non-empty subnodes must specify the 'pins' property.
-
-Valid values for pins are:
-  gpio0-gpio89
-
-Valid values for function are:
-  cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a, gp_clk_0b, gp_clk_1a,
-  gp_clk_1b, gp_clk_2a, gp_clk_2b, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
-  gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
-  gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
-  gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
-  riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic, ps_hold
-
-Example:
-
-	msmgpio: pinctrl@800000 {
-		compatible = "qcom,apq8064-pinctrl";
-		reg = <0x800000 0x4000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 16 0x4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gsbi5_uart_default>;
-		gpio-ranges = <&msmgpio 0 0 90>;
-
-		gsbi5_uart_default: gsbi5_uart_default {
-			mux {
-				pins = "gpio51", "gpio52";
-				function = "gsbi5";
-			};
-
-			tx {
-				pins = "gpio51";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio52";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.yaml
new file mode 100644
index 000000000000..f251dcd4bb7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,apq8064-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. APQ8064 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm APQ8064 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,apq8064-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-apq8064-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-apq8064-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-apq8064-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-8][0-9])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd, sdc3_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a,
+                gp_clk_0b, gp_clk_1a, gp_clk_1b, gp_clk_2a, gp_clk_2b,
+                gpio, gsbi1, gsbi2, gsbi3, gsbi4, gsbi4_cam_i2c,
+                gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3,
+                gsbi6, gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3,
+                gsbi7, gsbi7_spi_cs1, gsbi7_spi_cs2, gsbi7_spi_cs3,
+                gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm, riva_wlan,
+                sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic,
+                ps_hold ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@800000 {
+        compatible = "qcom,apq8064-pinctrl";
+        reg = <0x800000 0x4000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 90>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-state {
+            rx-pins {
+                pins = "gpio52";
+                function = "gsbi5";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio51";
+                function = "gsbi5";
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
deleted file mode 100644
index c9782397ff14..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
+++ /dev/null
@@ -1,188 +0,0 @@
-Qualcomm APQ8084 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-MSM8960 platform.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,apq8084-pinctrl"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of the TLMM register space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
-	Usage: required
-	Value type: <none>
-	Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 2. Specifying the pin number and flags, as defined
-		    in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
-	Usage: required
-	Definition:  see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
-	Usage: optional
-	Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
-	Usage: required
-	Value type: <string-array>
-	Definition: List of gpio pins affected by the properties specified in
-		    this subnode.  Valid pins are:
-		    gpio0-gpio146,
-		    sdc1_clk,
-		    sdc1_cmd,
-		    sdc1_data
-		    sdc2_clk,
-		    sdc2_cmd,
-		    sdc2_data
-
-- function:
-	Usage: required
-	Value type: <string>
-	Definition: Specify the alternative function to be configured for the
-		    specified pins. Functions are only valid for gpio pins.
-		    Valid values are:
-		    adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
-		    blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
-		    blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
-		    blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
-		    blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
-		    blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3,
-		    blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8,
-		    blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
-		    blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
-		    blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
-		    blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
-		    cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
-		    cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-		    edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i
-		    gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio,
-		    hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic,
-		    ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst,
-		    pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
-		    qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
-		    sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
-		    spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1,
-		    tsif2, uim, uim_batt_alarm
-
-- bias-disable:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as no pull.
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull down.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins should be configured as pull up.
-
-- output-high:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    high.
-		    Not valid for sdc pins.
-
-- output-low:
-	Usage: optional
-	Value type: <none>
-	Definition: The specified pins are configured in output mode, driven
-		    low.
-		    Not valid for sdc pins.
-
-- drive-strength:
-	Usage: optional
-	Value type: <u32>
-	Definition: Selects the drive strength for the specified pins, in mA.
-		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
-	tlmm: pinctrl@fd510000 {
-		compatible = "qcom,apq8084-pinctrl";
-		reg = <0xfd510000 0x4000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 147>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 208 0>;
-
-		uart2: uart2-default {
-			mux {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-			};
-
-			tx {
-				pins = "gpio4";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio5";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml
new file mode 100644
index 000000000000..38877d8b97ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,apq8084-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. APQ8084 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm APQ8084 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,apq8084-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-apq8084-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-apq8084-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-apq8084-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+                blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+                blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
+                blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+                blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+                blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
+                blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
+                blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+                blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6,
+                blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10,
+                blsp_uart11, blsp_uart12, blsp_uim1, blsp_uim2,
+                blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7,
+                blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
+                blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+                cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gcc_obt, gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2,
+                gp0_clk, gp1_clk, gpio, hdmi_cec, hdmi_ddc, hdmi_dtest,
+                hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update,
+                mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst, pci_e1,
+                pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
+                qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
+                sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
+                spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s,
+                tsif1, tsif2, uim, uim_batt_alarm ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@fd510000 {
+        compatible = "qcom,apq8084-pinctrl";
+        reg = <0xfd510000 0x4000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 147>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-state {
+            rx-pins {
+                pins = "gpio5";
+                function = "blsp_uart2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio4";
+                function = "blsp_uart2";
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
deleted file mode 100644
index 97858a7c07a2..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Qualcomm Atheros IPQ4019 TLMM block
-
-This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019
-platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities.
-
-Required properties:
-- compatible: "qcom,ipq4019-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-                The first cell is the gpio pin number and the
-                second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
- drive-strength.
-
-Non-empty subnodes must specify the 'pins' property.
-Note that not all properties are valid for all pins.
-
-
-Valid values for qcom,pins are:
-  gpio0-gpio99
-    Supports mux, bias and drive-strength
-
-Valid values for qcom,function are:
-aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0,
-blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
-jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11,
-mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
-smart2, smart3, tm, wifi0, wifi1
-
-Example:
-
-	tlmm: pinctrl@1000000 {
-		compatible = "qcom,ipq4019-pinctrl";
-		reg = <0x1000000 0x300000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&tlmm 0 0 100>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 208 0>;
-
-		serial_pins: serial_pinmux {
-			mux {
-				pins = "gpio60", "gpio61";
-				function = "blsp_uart0";
-				bias-disable;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.yaml
new file mode 100644
index 000000000000..cc5de9f77680
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq4019-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ4019 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ4019 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq4019-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq4019-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq4019-tlmm-state"
+        additionalProperties: false
+
+  "-hog(-[0-9]+)?$":
+    type: object
+    required:
+      - gpio-hog
+
+$defs:
+  qcom-ipq4019-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-9][0-9])$"
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0,
+                blsp_spi1, blsp_uart0, blsp_uart1, chip_rst, gpio,
+                i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
+                jtag, led0, led1, led2, led3, led4, led5, led6, led7,
+                led8, led9, led10, led11, mdc, mdio, pcie, pmu,
+                prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
+                smart2, smart3, tm, wifi0, wifi1 ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq4019-pinctrl";
+        reg = <0x01000000 0x300000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 100>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-state {
+            pins = "gpio16", "gpio17";
+            function = "blsp_uart0";
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
deleted file mode 100644
index a7aaaa7db83b..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-Qualcomm IPQ8064 TLMM block
-
-Required properties:
-- compatible: "qcom,ipq8064-pinctrl"
-- reg: Should be the base address and length of the TLMM block.
-- interrupts: Should be the parent IRQ of the TLMM block.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two.
-                The first cell is the gpio pin number and the
-                second cell is used for optional parameters.
-- gpio-ranges: see ../gpio/gpio.txt
-
-Optional properties:
-
-- gpio-reserved-ranges: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Qualcomm's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
- output-low, output-high.
-
-Non-empty subnodes must specify the 'pins' property.
-
-Valid values for qcom,pins are:
-  gpio0-gpio68
-   Supports mux, bias, and drive-strength
-
-  sdc3_clk, sdc3_cmd, sdc3_data
-   Supports bias and drive-strength
-
-
-Valid values for function are:
-  mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
-  gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
-  spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
-  pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
-  pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
-  pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
-  pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold
-
-Example:
-
-	pinmux: pinctrl@800000 {
-		compatible = "qcom,ipq8064-pinctrl";
-		reg = <0x800000 0x4000>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pinmux 0 0 69>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <0 32 0x4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gsbi5_uart_default>;
-
-		gsbi5_uart_default: gsbi5_uart_default {
-			mux {
-				pins = "gpio18", "gpio19";
-				function = "gsbi5";
-			};
-
-			tx {
-				pins = "gpio18";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio19";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.yaml
new file mode 100644
index 000000000000..58f11e1bdd4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8064-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ8064 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ8064 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq8064-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq8064-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq8064-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq8064-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-8])$"
+            - enum: [ sdc3_clk, sdc3_cmd, sdc3_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
+                gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
+                spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
+                pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
+                pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
+                pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
+                pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@800000 {
+        compatible = "qcom,ipq8064-pinctrl";
+        reg = <0x00800000 0x4000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 69>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-state {
+            rx-pins {
+                pins = "gpio19";
+                function = "gsbi5";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio18";
+                function = "gsbi5";
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 2784d32fdde2..c1b799167d81 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -425,6 +425,7 @@ patternProperties:
         additionalProperties: false
 
   "-hog(-[0-9]+)?$":
+    type: object
     required:
       - gpio-hog
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
index dfe5616b9b85..0f331844608c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -43,6 +43,7 @@ patternProperties:
         additionalProperties: false
 
   "-hog(-[0-9]+)?$":
+    type: object
     required:
       - gpio-hog
 
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
index 5d84364d1358..cfe004573366 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -25,6 +25,7 @@ properties:
       - renesas,pfc-r8a7745     # RZ/G1E
       - renesas,pfc-r8a77470    # RZ/G1C
       - renesas,pfc-r8a774a1    # RZ/G2M
+      - renesas,pfc-r8a774a3    # RZ/G2M v3.0
       - renesas,pfc-r8a774b1    # RZ/G2N
       - renesas,pfc-r8a774c0    # RZ/G2E
       - renesas,pfc-r8a774e1    # RZ/G2H
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
index 20e806dce1ec..6a23d845f1f2 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -45,6 +45,7 @@ properties:
       - rockchip,rk3368-pinctrl
       - rockchip,rk3399-pinctrl
       - rockchip,rk3568-pinctrl
+      - rockchip,rk3576-pinctrl
       - rockchip,rk3588-pinctrl
       - rockchip,rv1108-pinctrl
       - rockchip,rv1126-pinctrl
diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
new file mode 100644
index 000000000000..1e6a55afe26a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Pin Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+  compatible:
+    enum:
+      - sophgo,cv1800b-pinctrl
+      - sophgo,cv1812h-pinctrl
+      - sophgo,sg2000-pinctrl
+      - sophgo,sg2002-pinctrl
+
+  reg:
+    items:
+      - description: pinctrl for system domain
+      - description: pinctrl for rtc domain
+
+  reg-names:
+    items:
+      - const: sys
+      - const: rtc
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  '-cfg$':
+    type: object
+    description:
+      A pinctrl node should contain at least one subnode representing the
+      pinctrl groups available on the machine.
+
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          Each subnode will list the pins it needs, and how they should
+          be configured, with regard to muxer configuration, bias, input
+          enable/disable, input schmitt trigger, slew-rate, drive strength
+          and bus hold state. In addition, all pins in the same subnode
+          should have the same power domain. For configuration detail,
+          refer to https://github.com/sophgo/sophgo-doc/.
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX or GPIOMUX2
+              macro.
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength-microamp:
+            description: typical current when output high level.
+
+          input-schmitt-microvolt:
+            description: typical threshold for schmitt trigger.
+
+          power-source:
+            description: power supplies at X mV.
+            enum: [ 1800, 3300 ]
+
+          slew-rate:
+            description: slew rate for output buffer (0 is fast, 1 is slow)
+            enum: [ 0, 1 ]
+
+          bias-bus-hold: true
+
+        required:
+          - pinmux
+          - power-source
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
+
+    pinctrl@3001000 {
+        compatible = "sophgo,cv1800b-pinctrl";
+        reg = <0x03001000 0x1000>,
+              <0x05027000 0x1000>;
+        reg-names = "sys", "rtc";
+
+        uart0_cfg: uart0-cfg {
+            uart0-pins {
+                pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+                         <PINMUX(PIN_UART0_RX, 0)>;
+                bias-pull-up;
+                drive-strength-microamp = <10800>;
+                input-schmitt-microvolt = <0>;
+                power-source = <3300>;
+                slew-rate = <0>;
+            };
+        };
+    };
+
+...