Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

5 files changed, 11 insertions, 11 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3c1eddd9fcc7..9822afb6313c 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
     or the value stored in the card's EEPROM for cards that have an EEPROM and
     their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
 
     If dma2 is specified and different from dma1, the card will operate in
     full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
     or the value stored in the card's EEPROM for cards that have an EEPROM and
     their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
 
     If dma2 is specified and different from dma1, the card will operate in
     full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -2229,7 +2229,7 @@ Proc interfaces (/proc/asound)
 
 /proc/asound/card#/pcm#[cp]/oss
 -------------------------------
-  String "erase" - erase all additional informations about OSS applications
+  String "erase" - erase all additional information about OSS applications
   String "<app_name> <fragments> <fragment_size> [<options>]"
 
    <app_name> - name of application with (higher priority) or without path
diff --git a/Documentation/sound/alsa/SB-Live-mixer.txt b/Documentation/sound/alsa/SB-Live-mixer.txt
index f5639d40521d..f4b5988f450c 100644
--- a/Documentation/sound/alsa/SB-Live-mixer.txt
+++ b/Documentation/sound/alsa/SB-Live-mixer.txt
@@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
 The result is forwarded to the ADC capture FIFO (thus to the standard capture
 PCM device).
 
-name='Music Playback Volume',index=0
+name='Synth Playback Volume',index=0
 
 This control is used to attenuate samples for left and right MIDI FX-bus
 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
 
-name='Music Capture Volume',index=0
-name='Music Capture Switch',index=0
+name='Synth Capture Volume',index=0
+name='Synth Capture Switch',index=0
 
 These controls are used to attenuate samples for left and right MIDI FX-bus
 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16
index c0f08922993b..e0dc0641b480 100644
--- a/Documentation/sound/oss/AudioExcelDSP16
+++ b/Documentation/sound/oss/AudioExcelDSP16
@@ -1,10 +1,10 @@
 Driver
 ------
 
-Informations about Audio Excel DSP 16 driver can be found in the source
+Information about Audio Excel DSP 16 driver can be found in the source
 file aedsp16.c
 Please, read the head of the source before using it. It contain useful
-informations.
+information.
 
 Configuration
 -------------
@@ -68,7 +68,7 @@ Sound cards supported
 This driver supports the SC-6000 and SC-6600 based Gallant's sound card.
 It don't support the Audio Excel DSP 16 III (try the SC-6600 code).
 I'm working on the III version of the card: if someone have useful
-informations about it, please let me know.
+information about it, please let me know.
 For all the non-supported audio cards, you have to boot MS-DOS (or WIN95)
 activating the audio card with the MS-DOS device driver, then you have to
 <ctrl>-<alt>-<del> and boot Linux.
diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS
index c615debbf08d..4be259428a1c 100644
--- a/Documentation/sound/oss/README.OSS
+++ b/Documentation/sound/oss/README.OSS
@@ -1352,7 +1352,7 @@ OSS-mixer.
 The PCM20 contains a radio tuner, which is also controlled by
 ACI. This radio tuner is supported by the ACI driver together with the
 miropcm20.o module. Also the 7-band equalizer is integrated
-(limited by the OSS-design). Developement has started and maybe
+(limited by the OSS-design). Development has started and maybe
 finished for the RDS decoder on this card, too. You will be able to
 read RadioText, the Programme Service name, Programme TYpe and
 others. Even the v4l radio module benefits from it with a refined
diff --git a/Documentation/sound/oss/README.ymfsb b/Documentation/sound/oss/README.ymfsb
index af8a7d3a4e8e..b6b77906b58d 100644
--- a/Documentation/sound/oss/README.ymfsb
+++ b/Documentation/sound/oss/README.ymfsb
@@ -5,7 +5,7 @@ FIRST OF ALL
 ============
 
   This code references YAMAHA's sample codes and data sheets.
-  I respect and thank for all people they made open the informations
+  I respect and thank for all people they made open the information
   about YMF7xx cards.
 
   And this codes heavily based on Jeff Garzik <jgarzik@pobox.com>'s