docs: rename Documentation/vm to Documentation/mm

so it will be consistent with code mm directory and with
Documentation/admin-guide/mm and won't be confused with virtual machines.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Wu XiangCheng <bobwxc@email.cn>

1 files changed, 177 insertions, 0 deletions

diff --git a/Documentation/mm/memory-model.rst b/Documentation/mm/memory-model.rst
new file mode 100644
index 000000000000..3779e562dc76
--- /dev/null
+++ b/Documentation/mm/memory-model.rst
@@ -0,0 +1,177 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _physical_memory_model:
+
+=====================
+Physical Memory Model
+=====================
+
+Physical memory in a system may be addressed in different ways. The
+simplest case is when the physical memory starts at address 0 and
+spans a contiguous range up to the maximal address. It could be,
+however, that this range contains small holes that are not accessible
+for the CPU. Then there could be several contiguous ranges at
+completely distinct addresses. And, don't forget about NUMA, where
+different memory banks are attached to different CPUs.
+
+Linux abstracts this diversity using one of the two memory models:
+FLATMEM and SPARSEMEM. Each architecture defines what
+memory models it supports, what the default memory model is and
+whether it is possible to manually override that default.
+
+All the memory models track the status of physical page frames using
+struct page arranged in one or more arrays.
+
+Regardless of the selected memory model, there exists one-to-one
+mapping between the physical page frame number (PFN) and the
+corresponding `struct page`.
+
+Each memory model defines :c:func:`pfn_to_page` and :c:func:`page_to_pfn`
+helpers that allow the conversion from PFN to `struct page` and vice
+versa.
+
+FLATMEM
+=======
+
+The simplest memory model is FLATMEM. This model is suitable for
+non-NUMA systems with contiguous, or mostly contiguous, physical
+memory.
+
+In the FLATMEM memory model, there is a global `mem_map` array that
+maps the entire physical memory. For most architectures, the holes
+have entries in the `mem_map` array. The `struct page` objects
+corresponding to the holes are never fully initialized.
+
+To allocate the `mem_map` array, architecture specific setup code should
+call :c:func:`free_area_init` function. Yet, the mappings array is not
+usable until the call to :c:func:`memblock_free_all` that hands all the
+memory to the page allocator.
+
+An architecture may free parts of the `mem_map` array that do not cover the
+actual physical pages. In such case, the architecture specific
+:c:func:`pfn_valid` implementation should take the holes in the
+`mem_map` into account.
+
+With FLATMEM, the conversion between a PFN and the `struct page` is
+straightforward: `PFN - ARCH_PFN_OFFSET` is an index to the
+`mem_map` array.
+
+The `ARCH_PFN_OFFSET` defines the first page frame number for
+systems with physical memory starting at address different from 0.
+
+SPARSEMEM
+=========
+
+SPARSEMEM is the most versatile memory model available in Linux and it
+is the only memory model that supports several advanced features such
+as hot-plug and hot-remove of the physical memory, alternative memory
+maps for non-volatile memory devices and deferred initialization of
+the memory map for larger systems.
+
+The SPARSEMEM model presents the physical memory as a collection of
+sections. A section is represented with struct mem_section
+that contains `section_mem_map` that is, logically, a pointer to an
+array of struct pages. However, it is stored with some other magic
+that aids the sections management. The section size and maximal number
+of section is specified using `SECTION_SIZE_BITS` and
+`MAX_PHYSMEM_BITS` constants defined by each architecture that
+supports SPARSEMEM. While `MAX_PHYSMEM_BITS` is an actual width of a
+physical address that an architecture supports, the
+`SECTION_SIZE_BITS` is an arbitrary value.
+
+The maximal number of sections is denoted `NR_MEM_SECTIONS` and
+defined as
+
+.. math::
+
+   NR\_MEM\_SECTIONS = 2 ^ {(MAX\_PHYSMEM\_BITS - SECTION\_SIZE\_BITS)}
+
+The `mem_section` objects are arranged in a two-dimensional array
+called `mem_sections`. The size and placement of this array depend
+on `CONFIG_SPARSEMEM_EXTREME` and the maximal possible number of
+sections:
+
+* When `CONFIG_SPARSEMEM_EXTREME` is disabled, the `mem_sections`
+  array is static and has `NR_MEM_SECTIONS` rows. Each row holds a
+  single `mem_section` object.
+* When `CONFIG_SPARSEMEM_EXTREME` is enabled, the `mem_sections`
+  array is dynamically allocated. Each row contains PAGE_SIZE worth of
+  `mem_section` objects and the number of rows is calculated to fit
+  all the memory sections.
+
+The architecture setup code should call sparse_init() to
+initialize the memory sections and the memory maps.
+
+With SPARSEMEM there are two possible ways to convert a PFN to the
+corresponding `struct page` - a "classic sparse" and "sparse
+vmemmap". The selection is made at build time and it is determined by
+the value of `CONFIG_SPARSEMEM_VMEMMAP`.
+
+The classic sparse encodes the section number of a page in page->flags
+and uses high bits of a PFN to access the section that maps that page
+frame. Inside a section, the PFN is the index to the array of pages.
+
+The sparse vmemmap uses a virtually mapped memory map to optimize
+pfn_to_page and page_to_pfn operations. There is a global `struct
+page *vmemmap` pointer that points to a virtually contiguous array of
+`struct page` objects. A PFN is an index to that array and the
+offset of the `struct page` from `vmemmap` is the PFN of that
+page.
+
+To use vmemmap, an architecture has to reserve a range of virtual
+addresses that will map the physical pages containing the memory
+map and make sure that `vmemmap` points to that range. In addition,
+the architecture should implement :c:func:`vmemmap_populate` method
+that will allocate the physical memory and create page tables for the
+virtual memory map. If an architecture does not have any special
+requirements for the vmemmap mappings, it can use default
+:c:func:`vmemmap_populate_basepages` provided by the generic memory
+management.
+
+The virtually mapped memory map allows storing `struct page` objects
+for persistent memory devices in pre-allocated storage on those
+devices. This storage is represented with struct vmem_altmap
+that is eventually passed to vmemmap_populate() through a long chain
+of function calls. The vmemmap_populate() implementation may use the
+`vmem_altmap` along with :c:func:`vmemmap_alloc_block_buf` helper to
+allocate memory map on the persistent memory device.
+
+ZONE_DEVICE
+===========
+The `ZONE_DEVICE` facility builds upon `SPARSEMEM_VMEMMAP` to offer
+`struct page` `mem_map` services for device driver identified physical
+address ranges. The "device" aspect of `ZONE_DEVICE` relates to the fact
+that the page objects for these address ranges are never marked online,
+and that a reference must be taken against the device, not just the page
+to keep the memory pinned for active use. `ZONE_DEVICE`, via
+:c:func:`devm_memremap_pages`, performs just enough memory hotplug to
+turn on :c:func:`pfn_to_page`, :c:func:`page_to_pfn`, and
+:c:func:`get_user_pages` service for the given range of pfns. Since the
+page reference count never drops below 1 the page is never tracked as
+free memory and the page's `struct list_head lru` space is repurposed
+for back referencing to the host device / driver that mapped the memory.
+
+While `SPARSEMEM` presents memory as a collection of sections,
+optionally collected into memory blocks, `ZONE_DEVICE` users have a need
+for smaller granularity of populating the `mem_map`. Given that
+`ZONE_DEVICE` memory is never marked online it is subsequently never
+subject to its memory ranges being exposed through the sysfs memory
+hotplug api on memory block boundaries. The implementation relies on
+this lack of user-api constraint to allow sub-section sized memory
+ranges to be specified to :c:func:`arch_add_memory`, the top-half of
+memory hotplug. Sub-section support allows for 2MB as the cross-arch
+common alignment granularity for :c:func:`devm_memremap_pages`.
+
+The users of `ZONE_DEVICE` are:
+
+* pmem: Map platform persistent memory to be used as a direct-I/O target
+  via DAX mappings.
+
+* hmm: Extend `ZONE_DEVICE` with `->page_fault()` and `->page_free()`
+  event callbacks to allow a device-driver to coordinate memory management
+  events related to device-memory, typically GPU memory. See
+  Documentation/mm/hmm.rst.
+
+* p2pdma: Create `struct page` objects to allow peer devices in a
+  PCI/-E topology to coordinate direct-DMA operations between themselves,
+  i.e. bypass host memory.