Merge tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The majority of the changes are driver updates and new device support.
  The core framework is mostly unchanged this time around, with only a
  couple patches to expose a clk provider API and make getting clk
  parent names from DT more robust.

  Driver updates:

   - Support for clock controllers found on Broadcom Northstar SoCs and
     bcm2835 SoC

   - Support for Allwinner audio clocks

   - A few cleanup patches for Tegra drivers and support for the highest
     DFLL frequencies on Tegra124

   - Samsung exynos7 fixes and improvements

   - i.Mx SoC updates to add a few missing clocks and keep debug uart
     clocks on during kernel intialization

   - Some mediatek cleanups and support for more subsystem clocks

   - Support for msm8916 gpu/audio clocks and qcom's GDSC power domain
     controllers

   - A new driver for the Silabs si514 clock chip"

* tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (143 commits)
  clk: qcom: msm8960: Fix dsi1/2 halt bits
  clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks
  clk: lpc18xx-ccu: fix potential system hang when disabling unused clocks
  clk: Add clk_hw_is_enabled() for use by clk providers
  clk: Add stubs for of_clk_*() APIs when CONFIG_OF=n
  clk: versatile-icst: fix memory leak
  clk: Remove clk_{register,unregister}_multiplier()
  clk: iproc: define Broadcom NS2 iProc clock binding
  clk: iproc: define Broadcom NSP iProc clock binding
  clk: ns2: add clock support for Broadcom Northstar 2 SoC
  clk: iproc: Separate status and control variables
  clk: iproc: Split off dig_filter
  clk: iproc: Add PLL base write function
  clk: nsp: add clock support for Broadcom Northstar Plus SoC
  clk: iproc: Add PWRCTRL support
  clk: cygnus: Convert all macros to all caps
  ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled
  clk: imx31: add missing of_node_put
  clk: imx27: add missing of_node_put
  clk: si5351: add missing of_node_put
  ...

1 files changed, 35 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 5ba6450693b9..181bc8ac4e3a 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -77,6 +77,9 @@ Required properties:
 	"atmel,sama5d4-clk-h32mx":
 		at91 h32mx clock
 
+	"atmel,sama5d2-clk-generated":
+		at91 generated clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -461,3 +464,35 @@ For example:
 		compatible = "atmel,sama5d4-clk-h32mx";
 		clocks = <&mck>;
 	};
+
+Required properties for generated clocks:
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- clocks : shall be the generated clock source phandles.
+	e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
+- name: device tree node describing a specific generated clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* reg: peripheral id. See Atmel's datasheets to get a full
+	  list of peripheral ids.
+	* atmel,clk-output-range : minimum and maximum clock frequency
+	  (two u32 fields).
+
+For example:
+	gck {
+		compatible = "atmel,sama5d2-clk-generated";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
+
+		tcb0_gclk: tcb0_gclk {
+			#clock-cells = <0>;
+			reg = <35>;
+			atmel,clk-output-range = <0 83000000>;
+		};
+
+		pwm_gclk: pwm_gclk {
+			#clock-cells = <0>;
+			reg = <38>;
+			atmel,clk-output-range = <0 83000000>;
+		};
+	};