Merge tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Merge "Samsung cleanup for v3.20" from Kukjin Kim:

- remove i2c sys configuration from mach-exynos/
  : all related codes moved into i2c driver
- remove Samsung specific DMA
  : every Samsung stuff uses dmaengine APIs

* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: remove unused DMA infrastructure
  ARM: EXYNOS: Remove i2c sys configuration related code

Signed-off-by: Olof Johansson <olof@lixom.net>

28 files changed, 5 insertions, 3498 deletions

diff --git a/Documentation/arm/Samsung-S3C24XX/DMA.txt b/Documentation/arm/Samsung-S3C24XX/DMA.txt
deleted file mode 100644
index 3ed82383efea..000000000000
--- a/Documentation/arm/Samsung-S3C24XX/DMA.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-			S3C2410 DMA
-			===========
-
-Introduction
-------------
-
-   The kernel provides an interface to manage DMA transfers
-   using the DMA channels in the CPU, so that the central
-   duty of managing channel mappings, and programming the
-   channel generators is in one place.
-
-
-DMA Channel Ordering
---------------------
-
-   Many of the range do not have connections for the DMA
-   channels to all sources, which means that some devices
-   have a restricted number of channels that can be used.
-
-   To allow flexibility for each CPU type and board, the
-   DMA code can be given a DMA ordering structure which
-   allows the order of channel search to be specified, as
-   well as allowing the prohibition of certain claims.
-
-   struct s3c24xx_dma_order has a list of channels, and
-   each channel within has a slot for a list of DMA
-   channel numbers. The slots are searched in order for
-   the presence of a DMA channel number with DMA_CH_VALID
-   or-ed in.
-
-   If the order has the flag DMA_CH_NEVER set, then after
-   checking the channel list, the system will return no
-   found channel, thus denying the request.
-
-   A board support file can call s3c24xx_dma_order_set()
-   to register a complete ordering set. The routine will
-   copy the data, so the original can be discarded with
-   __initdata.
-
-
-Authour
--------
-
-Ben Dooks,
-Copyright (c) 2007 Ben Dooks, Simtec Electronics
-Licensed under the GPL v2
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index c13d0837fa8c..2c844393cc4b 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -27,20 +27,16 @@
 #include <asm/mach/map.h>
 #include <asm/memory.h>
 
+#include <mach/map.h>
+
 #include "common.h"
 #include "mfc.h"
 #include "regs-pmu.h"
-#include "regs-sys.h"
 
 void __iomem *pmu_base_addr;
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_SROMC,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
 		.length		= SZ_4K,
@@ -70,11 +66,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 
 static struct map_desc exynos5_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_SROMC,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
 		.length		= SZ_4K,
@@ -213,32 +204,6 @@ static void __init exynos_init_irq(void)
 
 static void __init exynos_dt_machine_init(void)
 {
-	struct device_node *i2c_np;
-	const char *i2c_compat = "samsung,s3c2440-i2c";
-	unsigned int tmp;
-	int id;
-
-	/*
-	 * Exynos5's legacy i2c controller and new high speed i2c
-	 * controller have muxed interrupt sources. By default the
-	 * interrupts for 4-channel HS-I2C controller are enabled.
-	 * If node for first four channels of legacy i2c controller
-	 * are available then re-configure the interrupts via the
-	 * system register.
-	 */
-	if (soc_is_exynos5()) {
-		for_each_compatible_node(i2c_np, NULL, i2c_compat) {
-			if (of_device_is_available(i2c_np)) {
-				id = of_alias_get_id(i2c_np, "i2c");
-				if (id < 4) {
-					tmp = readl(EXYNOS5_SYS_I2C_CFG);
-					writel(tmp & ~(0x1 << id),
-							EXYNOS5_SYS_I2C_CFG);
-				}
-			}
-		}
-	}
-
 	/*
 	 * This is called from smp_prepare_cpus if we've built for SMP, but
 	 * we still need to set it up for PM and firmware ops if not.
diff --git a/arch/arm/mach-exynos/include/mach/dma.h b/arch/arm/mach-exynos/include/mach/dma.h
deleted file mode 100644
index 201842a3769e..000000000000
--- a/arch/arm/mach-exynos/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 1ad3f496ef56..de3ae59e1cfb 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -24,9 +24,6 @@
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
-#define EXYNOS4_PA_SYSCON		0x10010000
-#define EXYNOS5_PA_SYSCON		0x10050100
-
 #define EXYNOS4_PA_CMU			0x10030000
 #define EXYNOS5_PA_CMU			0x10010000
 
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 86f3ecd88f78..dfc8594e5b1f 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -23,12 +23,13 @@
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
+#include <mach/map.h>
+
 #include <plat/pm-common.h>
 
 #include "common.h"
 #include "exynos-pmu.h"
 #include "regs-pmu.h"
-#include "regs-sys.h"
 
 static inline void __iomem *exynos_boot_vector_addr(void)
 {
diff --git a/arch/arm/mach-exynos/regs-sys.h b/arch/arm/mach-exynos/regs-sys.h
deleted file mode 100644
index 84332b0dd7a6..000000000000
--- a/arch/arm/mach-exynos/regs-sys.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *             http://www.samsung.com
- *
- * EXYNOS - system register definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SYS_H
-#define __ASM_ARCH_REGS_SYS_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SYSREG(x)                          (S3C_VA_SYS + (x))
-
-/* For EXYNOS5 */
-#define EXYNOS5_SYS_I2C_CFG                    S5P_SYSREG(0x0234)
-
-#endif /* __ASM_ARCH_REGS_SYS_H */
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index f8e7dcd17055..342797b9bf3b 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -34,7 +34,6 @@
 
 #include "common.h"
 #include "regs-pmu.h"
-#include "regs-sys.h"
 #include "exynos-pmu.h"
 
 #define S5P_CHECK_SLEEP 0x00000BAD
@@ -53,10 +52,6 @@ struct exynos_wkup_irq {
 	u32 mask;
 };
 
-static struct sleep_save exynos5_sys_save[] = {
-	SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
-};
-
 static struct sleep_save exynos_core_save[] = {
 	/* SROM side */
 	SAVE_ITEM(S5P_SROM_BW),
@@ -497,8 +492,6 @@ static const struct exynos_pm_data exynos5250_pm_data = {
 	.wkup_irq	= exynos5250_wkup_irq,
 	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
 	.release_ret_regs = exynos_release_ret_regs,
-	.extra_save	= exynos5_sys_save,
-	.num_extra_save	= ARRAY_SIZE(exynos5_sys_save),
 	.pm_suspend	= exynos_pm_suspend,
 	.pm_resume	= exynos_pm_resume,
 	.pm_prepare	= exynos_pm_prepare,
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 9eb22297cbe1..79c49ff77f6e 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -29,7 +29,6 @@ config CPU_S3C2410
 	default y
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
-	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
 	help
@@ -40,7 +39,6 @@ config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select CPU_ARM926T
 	select S3C2412_COMMON_CLK
-	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -50,7 +48,6 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select S3C2416_PM if PM
 	select S3C2443_COMMON_CLK
-	select S3C2443_DMA if S3C24XX_DMA
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -59,7 +56,6 @@ config CPU_S3C2440
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
-	select S3C2440_DMA if S3C24XX_DMA
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
@@ -67,7 +63,6 @@ config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
-	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
@@ -80,7 +75,6 @@ config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select CPU_ARM920T
 	select S3C2443_COMMON_CLK
-	select S3C2443_DMA if S3C24XX_DMA
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -114,27 +108,6 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-config S3C24XX_DMA
-	bool "S3C2410 DMA support (deprecated)"
-	select S3C_DMA
-	help
-	  S3C2410 DMA support. This is needed for drivers like sound which
-	  use the S3C2410's DMA system to move data to and from the
-	  peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-	bool "S3C2410 DMA support debug"
-	depends on S3C2410_DMA
-	help
-	  Enable debugging output for the DMA code. This option sends info
-	  to the kernel log, at priority KERN_DEBUG.
-
-config S3C2410_DMA
-	bool
-	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
 config S3C2410_PM
 	bool
 	help
@@ -325,11 +298,6 @@ config CPU_S3C2412_ONLY
 		   !CPU_S3C2442 && !CPU_S3C2443
 	default y
 
-config S3C2412_DMA
-	bool
-	help
-	  Internal config node for S3C2412 DMA support
-
 config S3C2412_PM
 	bool
 	select S3C2412_PM_SLEEP
@@ -438,11 +406,6 @@ endif	# CPU_S3C2416
 
 if CPU_S3C2440
 
-config S3C2440_DMA
-	bool
-	help
-	  Support for S3C2440 specific DMA code5A
-
 config S3C2440_XTAL_12000000
 	bool
 	help
@@ -601,11 +564,6 @@ endif	# CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
-config S3C2443_DMA
-	bool
-	help
-	  Internal config node for S3C2443 DMA support
-
 config S3C2443_SETUP_SPI
 	bool
 	help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index b92071638733..b40a22fe082a 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -12,12 +12,10 @@
 obj-y				+= common.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
@@ -27,7 +25,6 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
@@ -39,15 +36,11 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
-obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
-
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 
-obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
-
 #
 # machine support
 # following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
deleted file mode 100644
index 09aa12da1789..000000000000
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/cpu.h>
-#include <plat/dma-s3c24xx.h>
-
-#include <mach/regs-gpio.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-lcd.h>
-#include <plat/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
-	.select		= s3c2410_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2410_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
-};
-
-static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
-	.channels	= {
-		[DMACH_SDI]	= {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-				[2]	= 0 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_IN]	= {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-	},
-};
-
-static int __init s3c2410_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c2410_dma_init();
-	s3c24xx_dma_order_set(&s3c2410_dma_order);
-	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct subsys_interface s3c2410_dma_interface = {
-	.name		= "s3c2410_dma",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_dma_add,
-};
-
-static int __init s3c2410_dma_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410_dma_interface);
-}
-
-arch_initcall(s3c2410_dma_drvinit);
-
-static struct subsys_interface s3c2410a_dma_interface = {
-	.name		= "s3c2410a_dma",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_dma_add,
-};
-
-static int __init s3c2410a_dma_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410a_dma_interface);
-}
-
-arch_initcall(s3c2410a_dma_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-/* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct subsys_interface s3c2442_dma_interface = {
-	.name		= "s3c2442_dma",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2410_dma_add,
-};
-
-static int __init s3c2442_dma_drvinit(void)
-{
-	return subsys_interface_register(&s3c2442_dma_interface);
-}
-
-arch_initcall(s3c2442_dma_drvinit);
-#endif
-
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
deleted file mode 100644
index 0c0106d1a4d1..000000000000
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <mach/regs-gpio.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-lcd.h>
-#include <plat/regs-spi.h>
-
-#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
-
-static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ0),
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ1),
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
-	},
-	[DMACH_SPI0_RX] = {
-		.name		= "spi0-rx",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI0RX),
-	},
-	[DMACH_SPI0_TX] = {
-		.name		= "spi0-tx",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
-	},
-	[DMACH_SPI1_RX] = {
-		.name		= "spi1-rx",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI1RX),
-	},
-	[DMACH_SPI1_TX] = {
-		.name		= "spi1-tx",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
-	},
-	[DMACH_UART0_SRC2] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
-	},
-	[DMACH_UART1_SRC2] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
-	},
-      	[DMACH_UART2_SRC2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels	= MAP(S3C2412_DMAREQSEL_TIMER),
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP1),
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP2),
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP3),
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP4),
-	},
-};
-
-static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	unsigned long chsel = map->channels[0] & (~DMA_CH_VALID);
-	writel(chsel | S3C2412_DMAREQSEL_HW,
-	       chan->regs + S3C2412_DMA_DMAREQSEL);
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
-	.select		= s3c2412_dma_select,
-	.dcon_mask	= 0,
-	.map		= s3c2412_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
-};
-
-static int __init s3c2412_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c2410_dma_init();
-	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
-}
-
-static struct subsys_interface s3c2412_dma_interface = {
-	.name		= "s3c2412_dma",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_dma_add,
-};
-
-static int __init s3c2412_dma_init(void)
-{
-	return subsys_interface_register(&s3c2412_dma_interface);
-}
-
-arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
deleted file mode 100644
index 2f8e8a3017df..000000000000
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <mach/regs-gpio.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-lcd.h>
-#include <plat/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-	},
-	[DMACH_PCM_IN] = {
-		.name		= "pcm-in",
-		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
-		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
-	},
-	[DMACH_PCM_OUT] = {
-		.name		= "pcm-out",
-		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
-	},
-	[DMACH_MIC_IN] = {
-		.name		= "mic-in",
-		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	= S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
-	.select		= s3c2440_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2440_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
-};
-
-static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
-	.channels	= {
-		[DMACH_SDI]	= {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-				[2]	= 1 | DMA_CH_VALID,
-				[3]	= 0 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_IN]	= {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_OUT]	= {
-			.list	= {
-				[0]	= 2 | DMA_CH_VALID,
-				[1]	= 1 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_PCM_IN] = {
-			.list	= {
-				[0]	= 2 | DMA_CH_VALID,
-				[1]	= 1 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_PCM_OUT] = {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 3 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_MIC_IN] = {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-	},
-};
-
-static int __init s3c2440_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c2410_dma_init();
-	s3c24xx_dma_order_set(&s3c2440_dma_order);
-	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
-}
-
-static struct subsys_interface s3c2440_dma_interface = {
-	.name		= "s3c2440_dma",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_dma_add,
-};
-
-static int __init s3c2440_dma_init(void)
-{
-	return subsys_interface_register(&s3c2440_dma_interface);
-}
-
-arch_initcall(s3c2440_dma_init);
-
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
deleted file mode 100644
index f4096ec0700a..000000000000
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/dma.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <mach/regs-gpio.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-lcd.h>
-#include <plat/regs-spi.h>
-
-#define MAP(x) { \
-		[0]	= (x) | DMA_CH_VALID,	\
-		[1]	= (x) | DMA_CH_VALID,	\
-		[2]	= (x) | DMA_CH_VALID,	\
-		[3]	= (x) | DMA_CH_VALID,	\
-		[4]	= (x) | DMA_CH_VALID,	\
-		[5]     = (x) | DMA_CH_VALID,	\
-	}
-
-static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ0),
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ1),
-	},
-	[DMACH_SDI] = { /* only on S3C2443 */
-		.name		= "sdi",
-		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
-	},
-	[DMACH_SPI0_RX] = {
-		.name		= "spi0-rx",
-		.channels	= MAP(S3C2443_DMAREQSEL_SPI0RX),
-	},
-	[DMACH_SPI0_TX] = {
-		.name		= "spi0-tx",
-		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
-	},
-	[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1-rx",
-		.channels	= MAP(S3C2443_DMAREQSEL_SPI1RX),
-	},
-	[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1-tx",
-		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART0_0),
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART1_0),
-	},
-	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART2_0),
-	},
-	[DMACH_UART3] = {
-		.name		= "uart3",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART3_0),
-	},
-	[DMACH_UART0_SRC2] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART0_1),
-	},
-	[DMACH_UART1_SRC2] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART1_1),
-	},
-	[DMACH_UART2_SRC2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART2_1),
-	},
-	[DMACH_UART3_SRC2] = {
-		.name		= "uart3",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART3_1),
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels	= MAP(S3C2443_DMAREQSEL_TIMER),
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels	= MAP(S3C2443_DMAREQSEL_I2SRX),
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels	= MAP(S3C2443_DMAREQSEL_I2STX),
-	},
-	[DMACH_PCM_IN] = {
-		.name		= "pcm-in",
-		.channels	= MAP(S3C2443_DMAREQSEL_PCMIN),
-	},
-	[DMACH_PCM_OUT] = {
-		.name		= "pcm-out",
-		.channels	= MAP(S3C2443_DMAREQSEL_PCMOUT),
-	},
-	[DMACH_MIC_IN] = {
-		.name		= "mic-in",
-		.channels	= MAP(S3C2443_DMAREQSEL_MICIN),
-	},
-};
-
-static void s3c2443_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	unsigned long chsel = map->channels[0] & (~DMA_CH_VALID);
-	writel(chsel | S3C2443_DMAREQSEL_HW,
-	       chan->regs + S3C2443_DMA_DMAREQSEL);
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
-	.select		= s3c2443_dma_select,
-	.dcon_mask	= 0,
-	.map		= s3c2443_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2443_dma_mappings),
-};
-
-static int __init s3c2443_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
-	return s3c24xx_dma_init_map(&s3c2443_dma_sel);
-}
-
-#ifdef CONFIG_CPU_S3C2416
-/* S3C2416 DMA contains the same selection table as the S3C2443 */
-static struct subsys_interface s3c2416_dma_interface = {
-	.name		= "s3c2416_dma",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2443_dma_add,
-};
-
-static int __init s3c2416_dma_init(void)
-{
-	return subsys_interface_register(&s3c2416_dma_interface);
-}
-
-arch_initcall(s3c2416_dma_init);
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct subsys_interface s3c2443_dma_interface = {
-	.name		= "s3c2443_dma",
-	.subsys		= &s3c2443_subsys,
-	.add_dev	= s3c2443_dma_add,
-};
-
-static int __init s3c2443_dma_init(void)
-{
-	return subsys_interface_register(&s3c2443_dma_interface);
-}
-
-arch_initcall(s3c2443_dma_init);
-#endif
diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c
deleted file mode 100644
index a8dafc174fe3..000000000000
--- a/arch/arm/mach-s3c24xx/dma.c
+++ /dev/null
@@ -1,1465 +0,0 @@
-/*
- * Copyright 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA core
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/syscore_ops.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/map.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/regs-dma.h>
-
-/* io map for dma */
-static void __iomem *dma_base;
-static struct kmem_cache *dma_kmem;
-
-static int dma_channels;
-
-static struct s3c24xx_dma_selection dma_sel;
-
-
-/* debugging functions */
-
-#define BUF_MAGIC (0xcafebabe)
-
-#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
-
-#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
-
-#if 1
-#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
-#else
-static inline void
-dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
-{
-	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
-	writel(val, dma_regaddr(chan, reg));
-}
-#endif
-
-#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
-
-/* captured register state for debug */
-
-struct s3c2410_dma_regstate {
-	unsigned long         dcsrc;
-	unsigned long         disrc;
-	unsigned long         dstat;
-	unsigned long         dcon;
-	unsigned long         dmsktrig;
-};
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-
-/* dmadbg_showregs
- *
- * simple debug routine to print the current state of the dma registers
-*/
-
-static void
-dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
-{
-	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
-	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
-	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
-	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-}
-
-static void
-dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
-		 struct s3c2410_dma_regstate *regs)
-{
-	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
-	       chan->number, fname, line,
-	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
-	       regs->dcon);
-}
-
-static void
-dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-
-	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
-	       chan->number, fname, line, chan->load_state,
-	       chan->curr, chan->next, chan->end);
-
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-static void
-dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan))
-#else
-#define dbg_showregs(chan) do { } while(0)
-#define dbg_showchan(chan) do { } while(0)
-#endif /* CONFIG_S3C2410_DMA_DEBUG */
-
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
-{
-	if (stats == NULL)
-		return;
-
-	if (val > stats->timeout_longest)
-		stats->timeout_longest = val;
-	if (val < stats->timeout_shortest)
-		stats->timeout_shortest = val;
-
-	stats->timeout_avg += val;
-}
-
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
-	int timeout = chan->load_timeout;
-	int took;
-
-	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
-		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
-		return 0;
-	}
-
-	if (chan->stats != NULL)
-		chan->stats->loads++;
-
-	while (--timeout > 0) {
-		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
-			took = chan->load_timeout - timeout;
-
-			s3c2410_dma_stats_timeout(chan->stats, took);
-
-			switch (chan->load_state) {
-			case S3C2410_DMALOAD_1LOADED:
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				break;
-
-			default:
-				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
-			}
-
-			return 1;
-		}
-	}
-
-	if (chan->stats != NULL) {
-		chan->stats->timeout_failed++;
-	}
-
-	return 0;
-}
-
-/* s3c2410_dma_loadbuffer
- *
- * load a buffer, and update the channel state
-*/
-
-static inline int
-s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
-		       struct s3c2410_dma_buf *buf)
-{
-	unsigned long reload;
-
-	if (buf == NULL) {
-		dmawarn("buffer is NULL\n");
-		return -EINVAL;
-	}
-
-	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-		 buf, (unsigned long)buf->data, buf->size);
-
-	/* check the state of the channel before we do anything */
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
-	}
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
-		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
-	}
-
-	/* it would seem sensible if we are the last buffer to not bother
-	 * with the auto-reload bit, so that the DMA engine will not try
-	 * and load another transfer after this one has finished...
-	 */
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		pr_debug("load_state is none, checking for noreload (next=%p)\n",
-			 buf->next);
-		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
-	} else {
-		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
-		reload = S3C2410_DCON_AUTORELOAD;
-	}
-
-	if ((buf->data & 0xf0000000) != 0x30000000) {
-		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
-	}
-
-	writel(buf->data, chan->addr_reg);
-
-	dma_wrreg(chan, S3C2410_DMA_DCON,
-		  chan->dcon | reload | (buf->size/chan->xfer_unit));
-
-	chan->next = buf->next;
-
-	/* update the state of the channel */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_1RUNNING:
-		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
-		break;
-
-	default:
-		dmawarn("dmaload: unknown state %d in loadbuffer\n",
-			chan->load_state);
-		break;
-	}
-
-	return 0;
-}
-
-/* s3c2410_dma_call_op
- *
- * small routine to call the op routine with the given op if it has been
- * registered
-*/
-
-static void
-s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
-{
-	if (chan->op_fn != NULL) {
-		(chan->op_fn)(chan, op);
-	}
-}
-
-/* s3c2410_dma_buffdone
- *
- * small wrapper to check if callback routine needs to be called, and
- * if so, call it
-*/
-
-static inline void
-s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
-		     enum s3c2410_dma_buffresult result)
-{
-#if 0
-	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
-		 chan->callback_fn, buf, buf->id, buf->size, result);
-#endif
-
-	if (chan->callback_fn != NULL) {
-		(chan->callback_fn)(chan, buf->id, buf->size, result);
-	}
-}
-
-/* s3c2410_dma_start
- *
- * start a dma channel going
-*/
-
-static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
-{
-	unsigned long tmp;
-	unsigned long flags;
-
-	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
-
-	local_irq_save(flags);
-
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
-		local_irq_restore(flags);
-		return 0;
-	}
-
-	chan->state = S3C2410_DMA_RUNNING;
-
-	/* check whether there is anything to load, and if not, see
-	 * if we can find anything to load
-	 */
-
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		if (chan->next == NULL) {
-			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
-			       chan->number);
-			chan->state = S3C2410_DMA_IDLE;
-			local_irq_restore(flags);
-			return -EINVAL;
-		}
-
-		s3c2410_dma_loadbuffer(chan, chan->next);
-	}
-
-	dbg_showchan(chan);
-
-	/* enable the channel */
-
-	if (!chan->irq_enabled) {
-		enable_irq(chan->irq);
-		chan->irq_enabled = 1;
-	}
-
-	/* start the channel going */
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp &= ~S3C2410_DMASKTRIG_STOP;
-	tmp |= S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-
-#if 0
-	/* the dma buffer loads should take care of clearing the AUTO
-	 * reloading feature */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp &= ~S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __func__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
-	if (chan->load_state == S3C2410_DMALOAD_NONE ||
-	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
-		return 1;
-
-	return 0;
-}
-
-/* s3c2410_dma_enqueue
- *
- * queue an given buffer for dma transfer.
- *
- * id         the device driver's id information for this buffer
- * data       the physical address of the buffer data
- * size       the size of the buffer in bytes
- *
- * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
- * is checked, and if set, the channel is started. If this flag isn't set,
- * then an error will be returned.
- *
- * It is possible to queue more than one DMA buffer onto a channel at
- * once, and the code will deal with the re-loading of the next buffer
- * when necessary.
-*/
-
-int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	struct s3c2410_dma_buf *buf;
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: id=%p, data=%08x, size=%d\n",
-		 __func__, id, (unsigned int)data, size);
-
-	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
-	if (buf == NULL) {
-		pr_debug("%s: out of memory (%ld alloc)\n",
-			 __func__, (long)sizeof(*buf));
-		return -ENOMEM;
-	}
-
-	//pr_debug("%s: new buffer %p\n", __func__, buf);
-	//dbg_showchan(chan);
-
-	buf->next  = NULL;
-	buf->data  = buf->ptr = data;
-	buf->size  = size;
-	buf->id    = id;
-	buf->magic = BUF_MAGIC;
-
-	local_irq_save(flags);
-
-	if (chan->curr == NULL) {
-		/* we've got nothing loaded... */
-		pr_debug("%s: buffer %p queued onto empty channel\n",
-			 __func__, buf);
-
-		chan->curr = buf;
-		chan->end  = buf;
-		chan->next = NULL;
-	} else {
-		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
-			 chan->number, __func__, buf);
-
-		if (chan->end == NULL) {
-			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
-				 chan->number, __func__, chan);
-		} else {
-			chan->end->next = buf;
-			chan->end = buf;
-		}
-	}
-
-	/* if necessary, update the next buffer field */
-	if (chan->next == NULL)
-		chan->next = buf;
-
-	/* check to see if we can load a buffer */
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				printk(KERN_ERR "dma%d: loadbuffer:"
-				       "timeout loading buffer\n",
-				       chan->number);
-				dbg_showchan(chan);
-				local_irq_restore(flags);
-				return -EINVAL;
-			}
-		}
-
-		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	} else if (chan->state == S3C2410_DMA_IDLE) {
-		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
-			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
-					 S3C2410_DMAOP_START);
-		}
-	}
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-static inline void
-s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
-{
-	int magicok = (buf->magic == BUF_MAGIC);
-
-	buf->magic = -1;
-
-	if (magicok) {
-		kmem_cache_free(dma_kmem, buf);
-	} else {
-		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
-	}
-}
-
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
-	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
-		 chan->number, chan->load_state);
-#endif
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-			       chan->number, __func__);
-			return;
-		}
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* I believe in this case we do not have anything to do
-		 * until the next buffer comes along, and we turn off the
-		 * reload */
-		return;
-
-	default:
-		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
-			 chan->number, chan->load_state);
-		return;
-
-	}
-
-	/* hopefully this'll shut the damned thing up after the transfer... */
-	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
-#define dmadbg2(x...)
-
-static irqreturn_t
-s3c2410_dma_irq(int irq, void *devpw)
-{
-	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
-	struct s3c2410_dma_buf  *buf;
-
-	buf = chan->curr;
-
-	dbg_showchan(chan);
-
-	/* modify the channel state */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_1RUNNING:
-		/* TODO - if we are running only one buffer, we probably
-		 * want to reload here, and then worry about the buffer
-		 * callback */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		/* iirc, we should go back to NONE loaded here, we
-		 * had a buffer, and it was never verified as being
-		 * loaded.
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* we'll worry about checking to see if another buffer is
-		 * ready after we've called back the owner. This should
-		 * ensure we do not wait around too long for the DMA
-		 * engine to start the next transfer
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_NONE:
-		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
-		       chan->number);
-		break;
-
-	default:
-		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
-		       chan->number, chan->load_state);
-		break;
-	}
-
-	if (buf != NULL) {
-		/* update the chain to make sure that if we load any more
-		 * buffers when we call the callback function, things should
-		 * work properly */
-
-		chan->curr = buf->next;
-		buf->next  = NULL;
-
-		if (buf->magic != BUF_MAGIC) {
-			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
-			       chan->number, __func__, buf);
-			return IRQ_HANDLED;
-		}
-
-		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
-
-		/* free resouces */
-		s3c2410_dma_freebuf(buf);
-	} else {
-	}
-
-	/* only reload if the channel is still running... our buffer done
-	 * routine may have altered the state by requesting the dma channel
-	 * to stop or shutdown... */
-
-	/* todo: check that when the channel is shut-down from inside this
-	 * function, we cope with unsetting reload, etc */
-
-	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
-		unsigned long flags;
-
-		switch (chan->load_state) {
-		case S3C2410_DMALOAD_1RUNNING:
-			/* don't need to do anything for this state */
-			break;
-
-		case S3C2410_DMALOAD_NONE:
-			/* can load buffer immediately */
-			break;
-
-		case S3C2410_DMALOAD_1LOADED:
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-				       chan->number, __func__);
-				return IRQ_HANDLED;
-			}
-
-			break;
-
-		case S3C2410_DMALOAD_1LOADED_1RUNNING:
-			goto no_load;
-
-		default:
-			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
-			       chan->number, chan->load_state);
-			return IRQ_HANDLED;
-		}
-
-		local_irq_save(flags);
-		s3c2410_dma_loadbuffer(chan, chan->next);
-		local_irq_restore(flags);
-	} else {
-		s3c2410_dma_lastxfer(chan);
-
-		/* see if we can stop this channel.. */
-		if (chan->load_state == S3C2410_DMALOAD_NONE) {
-			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
-				 chan->number, jiffies);
-			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
-					 S3C2410_DMAOP_STOP);
-		}
-	}
-
- no_load:
-	return IRQ_HANDLED;
-}
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(enum dma_ch channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-	int err;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c2410_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-
-	if (!chan->irq_claimed) {
-		pr_debug("dma%d: %s : requesting irq %d\n",
-			 channel, __func__, chan->irq);
-
-		chan->irq_claimed = 1;
-		local_irq_restore(flags);
-
-		err = request_irq(chan->irq, s3c2410_dma_irq, 0,
-				  client->name, (void *)chan);
-
-		local_irq_save(flags);
-
-		if (err) {
-			chan->in_use = 0;
-			chan->irq_claimed = 0;
-			local_irq_restore(flags);
-
-			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
-			       client->name, chan->irq, chan->number);
-			return err;
-		}
-
-		chan->irq_enabled = 1;
-	}
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
-	return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: need to stop dma channel %p\n",
-		       __func__, chan);
-
-		/* possibly flush the channel */
-		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
-	}
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (chan->irq_claimed)
-		free_irq(chan->irq, (void *)chan);
-
-	chan->irq_claimed = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		s3c_dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-	unsigned long tmp;
-
-	pr_debug("%s:\n", __func__);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp |= S3C2410_DMASKTRIG_STOP;
-	//tmp &= ~S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp |= S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	/* should stop do this, or should we wait for flush? */
-	chan->state      = S3C2410_DMA_IDLE;
-	chan->load_state = S3C2410_DMALOAD_NONE;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
-{
-	unsigned long tmp;
-	unsigned int timeout = 0x10000;
-
-	while (timeout-- > 0) {
-		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
-		if (!(tmp & S3C2410_DMASKTRIG_ON))
-			return;
-	}
-
-	pr_debug("dma%d: failed to stop?\n", chan->number);
-}
-
-
-/* s3c2410_dma_flush
- *
- * stop the channel, and remove all current and pending transfers
-*/
-
-static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_buf *buf, *next;
-	unsigned long flags;
-
-	pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: stopping channel...\n", __func__ );
-		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
-	}
-
-	buf = chan->curr;
-	if (buf == NULL)
-		buf = chan->next;
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	if (buf != NULL) {
-		for ( ; buf != NULL; buf = next) {
-			next = buf->next;
-
-			pr_debug("%s: free buffer %p, next %p\n",
-			       __func__, buf, buf->next);
-
-			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
-			s3c2410_dma_freebuf(buf);
-		}
-	}
-
-	dbg_showregs(chan);
-
-	s3c2410_dma_waitforstop(chan);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	{
-		unsigned long tmp;
-
-		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-		tmp |= S3C2410_DCON_NORELOAD;
-		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-	}
-#endif
-
-	dbg_showregs(chan);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __func__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-
-}
-
-int
-s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c2410_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c2410_dma_dostop(chan);
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-		return -ENOENT;
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c2410_dma_flush(chan);
-
-	case S3C2410_DMAOP_STARTED:
-		return s3c2410_dma_started(chan);
-
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-
-	}
-
-	return -ENOENT;      /* unknown, don't bother */
-}
-
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* DMA configuration for each channel
- *
- * DISRCC -> source of the DMA (AHB,APB)
- * DISRC  -> source address of the DMA
- * DIDSTC -> destination of the DMA (AHB,APD)
- * DIDST  -> destination address of the DMA
-*/
-
-/* s3c2410_dma_config
- *
- * xfersize:     size of unit in bytes (1,2,4)
-*/
-
-int s3c2410_dma_config(enum dma_ch channel,
-		       int xferunit)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned int dcon;
-
-	pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	dcon = chan->dcon & dma_sel.dcon_mask;
-	pr_debug("%s: dcon is %08x\n", __func__, dcon);
-
-	switch (chan->req_ch) {
-	case DMACH_I2S_IN:
-	case DMACH_I2S_OUT:
-	case DMACH_PCM_IN:
-	case DMACH_PCM_OUT:
-	case DMACH_MIC_IN:
-	default:
-		dcon |= S3C2410_DCON_HANDSHAKE;
-		dcon |= S3C2410_DCON_SYNC_PCLK;
-		break;
-
-	case DMACH_SDI:
-		/* note, ensure if need HANDSHAKE or not */
-		dcon |= S3C2410_DCON_SYNC_PCLK;
-		break;
-
-	case DMACH_XD0:
-	case DMACH_XD1:
-		dcon |= S3C2410_DCON_HANDSHAKE;
-		dcon |= S3C2410_DCON_SYNC_HCLK;
-		break;
-	}
-
-	switch (xferunit) {
-	case 1:
-		dcon |= S3C2410_DCON_BYTE;
-		break;
-
-	case 2:
-		dcon |= S3C2410_DCON_HALFWORD;
-		break;
-
-	case 4:
-		dcon |= S3C2410_DCON_WORD;
-		break;
-
-	default:
-		pr_debug("%s: bad transfer size %d\n", __func__, xferunit);
-		return -EINVAL;
-	}
-
-	dcon |= S3C2410_DCON_HWTRIG;
-	dcon |= S3C2410_DCON_INTREQ;
-
-	pr_debug("%s: dcon now %08x\n", __func__, dcon);
-
-	chan->dcon = dcon;
-	chan->xfer_unit = xferunit;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-
-/* s3c2410_dma_devconfig
- *
- * configure the dma source/destination hardware type and address
- *
- * source:    DMA_FROM_DEVICE: source is hardware
- *            DMA_TO_DEVICE: source is memory
- *
- * devaddr:   physical address of the source
-*/
-
-int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum dma_data_direction source,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned int hwcfg;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: source=%d, devaddr=%08lx\n",
-		 __func__, (int)source, devaddr);
-
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	switch (chan->req_ch) {
-	case DMACH_XD0:
-	case DMACH_XD1:
-		hwcfg = 0; /* AHB */
-		break;
-
-	default:
-		hwcfg = S3C2410_DISRCC_APB;
-	}
-
-	/* always assume our peripheral desintation is a fixed
-	 * address in memory. */
-	 hwcfg |= S3C2410_DISRCC_INC;
-
-	switch (source) {
-	case DMA_FROM_DEVICE:
-		/* source is hardware */
-		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
-			 __func__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
-		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
-		break;
-
-	case DMA_TO_DEVICE:
-		/* source is memory */
-		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
-			 __func__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
-		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
-		break;
-
-	default:
-		printk(KERN_ERR "dma%d: invalid source type (%d)\n",
-		       channel, source);
-
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-/* s3c2410_dma_getposition
- *
- * returns the current transfer points for the dma source and destination
-*/
-
-int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	if (src != NULL)
- 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-
- 	if (dst != NULL)
- 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
-
- 	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* system core operations */
-
-#ifdef CONFIG_PM
-
-static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
-{
-	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
-
-	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
-		/* the dma channel is still working, which is probably
-		 * a bad thing to do over suspend/resume. We stop the
-		 * channel and assume that the client is either going to
-		 * retry after resume, or that it is broken.
-		 */
-
-		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
-		       cp->number);
-
-		s3c2410_dma_dostop(cp);
-	}
-}
-
-static int s3c2410_dma_suspend(void)
-{
-	struct s3c2410_dma_chan *cp = s3c2410_chans;
-	int channel;
-
-	for (channel = 0; channel < dma_channels; cp++, channel++)
-		s3c2410_dma_suspend_chan(cp);
-
-	return 0;
-}
-
-static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
-{
-	unsigned int no = cp->number | DMACH_LOW_LEVEL;
-
-	/* restore channel's hardware configuration */
-
-	if (!cp->in_use)
-		return;
-
-	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
-
-	s3c2410_dma_config(no, cp->xfer_unit);
-	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
-
-	/* re-select the dma source for this channel */
-
-	if (cp->map != NULL)
-		dma_sel.select(cp, cp->map);
-}
-
-static void s3c2410_dma_resume(void)
-{
-	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
-	int channel;
-
-	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
-		s3c2410_dma_resume_chan(cp);
-}
-
-#else
-#define s3c2410_dma_suspend NULL
-#define s3c2410_dma_resume  NULL
-#endif /* CONFIG_PM */
-
-struct syscore_ops dma_syscore_ops = {
-	.suspend	= s3c2410_dma_suspend,
-	.resume		= s3c2410_dma_resume,
-};
-
-/* kmem cache implementation */
-
-static void s3c2410_dma_cache_ctor(void *p)
-{
-	memset(p, 0, sizeof(struct s3c2410_dma_buf));
-}
-
-/* initialisation code */
-
-static int __init s3c24xx_dma_syscore_init(void)
-{
-	register_syscore_ops(&dma_syscore_ops);
-
-	return 0;
-}
-
-late_initcall(s3c24xx_dma_syscore_init);
-
-int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride)
-{
-	struct s3c2410_dma_chan *cp;
-	int channel;
-	int ret;
-
-	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
-
-	dma_channels = channels;
-
-	dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
-	if (dma_base == NULL) {
-		printk(KERN_ERR "dma failed to remap register block\n");
-		return -ENOMEM;
-	}
-
-	dma_kmem = kmem_cache_create("dma_desc",
-				     sizeof(struct s3c2410_dma_buf), 0,
-				     SLAB_HWCACHE_ALIGN,
-				     s3c2410_dma_cache_ctor);
-
-	if (dma_kmem == NULL) {
-		printk(KERN_ERR "dma failed to make kmem cache\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	for (channel = 0; channel < channels;  channel++) {
-		cp = &s3c2410_chans[channel];
-
-		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
-
-		/* dma channel irqs are in order.. */
-		cp->number = channel;
-		cp->irq    = channel + irq;
-		cp->regs   = dma_base + (channel * stride);
-
-		/* point current stats somewhere */
-		cp->stats  = &cp->stats_store;
-		cp->stats_store.timeout_shortest = LONG_MAX;
-
-		/* basic channel configuration */
-
-		cp->load_timeout = 1<<18;
-
-		printk("DMA channel %d at %p, irq %d\n",
-		       cp->number, cp->regs, cp->irq);
-	}
-
-	return 0;
-
- err:
-	kmem_cache_destroy(dma_kmem);
-	iounmap(dma_base);
-	dma_base = NULL;
-	return ret;
-}
-
-int __init s3c2410_dma_init(void)
-{
-	return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
-}
-
-static inline int is_channel_valid(unsigned int channel)
-{
-	return (channel & DMA_CH_VALID);
-}
-
-static struct s3c24xx_dma_order *dma_order;
-
-
-/* s3c2410_dma_map_channel()
- *
- * turn the virtual channel number into a real, and un-used hardware
- * channel.
- *
- * first, try the dma ordering given to us by either the relevant
- * dma code, or the board. Then just find the first usable free
- * channel
-*/
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
-{
-	struct s3c24xx_dma_order_ch *ord = NULL;
-	struct s3c24xx_dma_map *ch_map;
-	struct s3c2410_dma_chan *dmach;
-	int ch;
-
-	if (dma_sel.map == NULL || channel > dma_sel.map_size)
-		return NULL;
-
-	ch_map = dma_sel.map + channel;
-
-	/* first, try the board mapping */
-
-	if (dma_order) {
-		ord = &dma_order->channels[channel];
-
-		for (ch = 0; ch < dma_channels; ch++) {
-			int tmp;
-			if (!is_channel_valid(ord->list[ch]))
-				continue;
-
-			tmp = ord->list[ch] & ~DMA_CH_VALID;
-			if (s3c2410_chans[tmp].in_use == 0) {
-				ch = tmp;
-				goto found;
-			}
-		}
-
-		if (ord->flags & DMA_CH_NEVER)
-			return NULL;
-	}
-
-	/* second, search the channel map for first free */
-
-	for (ch = 0; ch < dma_channels; ch++) {
-		if (!is_channel_valid(ch_map->channels[ch]))
-			continue;
-
-		if (s3c2410_chans[ch].in_use == 0) {
-			printk("mapped channel %d to %d\n", channel, ch);
-			break;
-		}
-	}
-
-	if (ch >= dma_channels)
-		return NULL;
-
-	/* update our channel mapping */
-
- found:
-	dmach = &s3c2410_chans[ch];
-	dmach->map = ch_map;
-	dmach->req_ch = channel;
-	s3c_dma_chan_map[channel] = dmach;
-
-	/* select the channel */
-
-	(dma_sel.select)(dmach, ch_map);
-
-	return dmach;
-}
-
-static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
-{
-	return 0;
-}
-
-int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
-{
-	struct s3c24xx_dma_map *nmap;
-	size_t map_sz = sizeof(*nmap) * sel->map_size;
-	int ptr;
-
-	nmap = kmemdup(sel->map, map_sz, GFP_KERNEL);
-	if (nmap == NULL)
-		return -ENOMEM;
-
-	memcpy(&dma_sel, sel, sizeof(*sel));
-
-	dma_sel.map = nmap;
-
-	for (ptr = 0; ptr < sel->map_size; ptr++)
-		s3c24xx_dma_check_entry(nmap+ptr, ptr);
-
-	return 0;
-}
-
-int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
-{
-	struct s3c24xx_dma_order *nord = dma_order;
-
-	if (nord == NULL)
-		nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
-
-	if (nord == NULL) {
-		printk(KERN_ERR "no memory to store dma channel order\n");
-		return -ENOMEM;
-	}
-
-	dma_order = nord;
-	memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index b55da1d8cd8f..9e8117198e0c 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -15,8 +15,6 @@
 
 #include <linux/device.h>
 
-#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
-
 /* We use `virtual` dma channels to hide the fact we have only a limited
  * number of DMA channels, and not of all of them (dependent on the device)
  * can be attached to any DMA source. We therefore let the DMA core handle
@@ -54,161 +52,4 @@ enum dma_ch {
 	DMACH_MAX,		/* the end entry */
 };
 
-static inline bool samsung_dma_has_circular(void)
-{
-	return false;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return false;
-}
-
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
-
-/* we have 4 dma channels */
-#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416)
-#define S3C_DMA_CHANNELS		(4)
-#else
-#define S3C_DMA_CHANNELS		(6)
-#endif
-
-/* types */
-
-enum s3c2410_dma_state {
-	S3C2410_DMA_IDLE,
-	S3C2410_DMA_RUNNING,
-	S3C2410_DMA_PAUSED
-};
-
-/* enum s3c2410_dma_loadst
- *
- * This represents the state of the DMA engine, wrt to the loaded / running
- * transfers. Since we don't have any way of knowing exactly the state of
- * the DMA transfers, we need to know the state to make decisions on whether
- * we can
- *
- * S3C2410_DMA_NONE
- *
- * There are no buffers loaded (the channel should be inactive)
- *
- * S3C2410_DMA_1LOADED
- *
- * There is one buffer loaded, however it has not been confirmed to be
- * loaded by the DMA engine. This may be because the channel is not
- * yet running, or the DMA driver decided that it was too costly to
- * sit and wait for it to happen.
- *
- * S3C2410_DMA_1RUNNING
- *
- * The buffer has been confirmed running, and not finisged
- *
- * S3C2410_DMA_1LOADED_1RUNNING
- *
- * There is a buffer waiting to be loaded by the DMA engine, and one
- * currently running.
-*/
-
-enum s3c2410_dma_loadst {
-	S3C2410_DMALOAD_NONE,
-	S3C2410_DMALOAD_1LOADED,
-	S3C2410_DMALOAD_1RUNNING,
-	S3C2410_DMALOAD_1LOADED_1RUNNING,
-};
-
-
-/* flags */
-
-#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
-					    * waiting for reloads */
-#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
-
-#define S3C2410_DMAF_CIRCULAR	(1 << 2)	/* no circular dma support */
-
-/* dma buffer */
-
-struct s3c2410_dma_buf;
-
-/* s3c2410_dma_buf
- *
- * internally used buffer structure to describe a queued or running
- * buffer.
-*/
-
-struct s3c2410_dma_buf {
-	struct s3c2410_dma_buf	*next;
-	int			 magic;		/* magic */
-	int			 size;		/* buffer size in bytes */
-	dma_addr_t		 data;		/* start of DMA data */
-	dma_addr_t		 ptr;		/* where the DMA got to [1] */
-	void			*id;		/* client's id */
-};
-
-/* [1] is this updated for both recv/send modes? */
-
-struct s3c2410_dma_stats {
-	unsigned long		loads;
-	unsigned long		timeout_longest;
-	unsigned long		timeout_shortest;
-	unsigned long		timeout_avg;
-	unsigned long		timeout_failed;
-};
-
-struct s3c2410_dma_map;
-
-/* struct s3c2410_dma_chan
- *
- * full state information for each DMA channel
-*/
-
-struct s3c2410_dma_chan {
-	/* channel state flags and information */
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 irq_claimed; /* irq claimed for channel */
-	unsigned char		 irq_enabled; /* irq enabled for channel */
-	unsigned char		 xfer_unit;   /* size of an transfer */
-
-	/* channel state */
-
-	enum s3c2410_dma_state	 state;
-	enum s3c2410_dma_loadst	 load_state;
-	struct s3c2410_dma_client *client;
-
-	/* channel configuration */
-	enum dma_data_direction	 source;
-	enum dma_ch		 req_ch;
-	unsigned long		 dev_addr;
-	unsigned long		 load_timeout;
-	unsigned int		 flags;		/* channel flags */
-
-	struct s3c24xx_dma_map	*map;		/* channel hw maps */
-
-	/* channel's hardware position and configuration */
-	void __iomem		*regs;		/* channels registers */
-	void __iomem		*addr_reg;	/* data address register */
-	unsigned int		 irq;		/* channel irq */
-	unsigned long		 dcon;		/* default value of DCON */
-
-	/* driver handles */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* stats gathering */
-	struct s3c2410_dma_stats *stats;
-	struct s3c2410_dma_stats  stats_store;
-
-	/* buffer list and information */
-	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
-	struct s3c2410_dma_buf	*next;		/* next buffer to load */
-	struct s3c2410_dma_buf	*end;		/* end of queue */
-
-	/* system device */
-	struct device	dev;
-};
-
-typedef unsigned long dma_device_t;
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 059b1fc85037..096e14073bd9 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -51,21 +51,6 @@ enum dma_ch {
 	DMACH_MAX = 32
 };
 
-struct s3c2410_dma_client {
-	char	*name;
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return true;
-}
-
 #include <linux/amba/pl08x.h>
-#include <plat/dma-ops.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 9bd2776e7d05..cb8e3d655d1a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -236,13 +236,6 @@ config S3C_SETUP_CAMIF
 	help
 	  Compile in common setup code for S3C CAMIF devices
 
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
 config SAMSUNG_PM_GPIO
 	bool
 	default y if GPIO_SAMSUNG && PM
@@ -250,14 +243,6 @@ config SAMSUNG_PM_GPIO
 	  Include legacy GPIO power management code for platforms not using
 	  pinctrl-samsung driver.
 
-config SAMSUNG_DMADEV
-	bool "Use legacy Samsung DMA abstraction"
-	depends on CPU_S5PV210 || ARCH_S3C64XX
-	select DMADEVICES
-	default y
-	help
-	  Use DMA device engine for PL330 DMAC.
-
 endif
 
 config S5P_DEV_MFC
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 87746c37f030..1a29ab1f446d 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -26,12 +26,6 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
 
-# DMA support
-
-obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
-
-obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
-
 # PM support
 
 obj-$(CONFIG_PM_SLEEP)		+= pm-common.o
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
deleted file mode 100644
index 886326ee6f6c..000000000000
--- a/arch/arm/plat-samsung/dma-ops.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/amba/pl330.h>
-#include <linux/scatterlist.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-#if defined(CONFIG_PL330_DMA)
-#define dma_filter pl330_filter
-#elif defined(CONFIG_S3C64XX_PL080)
-#define dma_filter pl08x_filter_id
-#endif
-
-static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
-				struct samsung_dma_req *param,
-				struct device *dev, char *ch_name)
-{
-	dma_cap_mask_t mask;
-
-	dma_cap_zero(mask);
-	dma_cap_set(param->cap, mask);
-
-	if (dev->of_node)
-		return (unsigned)dma_request_slave_channel(dev, ch_name);
-	else
-		return (unsigned)dma_request_channel(mask, dma_filter,
-							(void *)dma_ch);
-}
-
-static int samsung_dmadev_release(unsigned ch, void *param)
-{
-	dma_release_channel((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static int samsung_dmadev_config(unsigned ch,
-				struct samsung_dma_config *param)
-{
-	struct dma_chan *chan = (struct dma_chan *)ch;
-	struct dma_slave_config slave_config;
-
-	if (param->direction == DMA_DEV_TO_MEM) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = param->direction;
-		slave_config.src_addr = param->fifo;
-		slave_config.src_addr_width = param->width;
-		slave_config.src_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	} else if (param->direction == DMA_MEM_TO_DEV) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = param->direction;
-		slave_config.dst_addr = param->fifo;
-		slave_config.dst_addr_width = param->width;
-		slave_config.dst_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	} else {
-		pr_warn("unsupported direction\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int samsung_dmadev_prepare(unsigned ch,
-			struct samsung_dma_prep *param)
-{
-	struct scatterlist sg;
-	struct dma_chan *chan = (struct dma_chan *)ch;
-	struct dma_async_tx_descriptor *desc;
-
-	switch (param->cap) {
-	case DMA_SLAVE:
-		sg_init_table(&sg, 1);
-		sg_dma_len(&sg) = param->len;
-		sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)),
-			    param->len, offset_in_page(param->buf));
-		sg_dma_address(&sg) = param->buf;
-
-		desc = dmaengine_prep_slave_sg(chan,
-			&sg, 1, param->direction, DMA_PREP_INTERRUPT);
-		break;
-	case DMA_CYCLIC:
-		desc = dmaengine_prep_dma_cyclic(chan, param->buf,
-			param->len, param->period, param->direction,
-			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-		break;
-	default:
-		dev_err(&chan->dev->device, "unsupported format\n");
-		return -EFAULT;
-	}
-
-	if (!desc) {
-		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
-		return -EFAULT;
-	}
-
-	desc->callback = param->fp;
-	desc->callback_param = param->fp_param;
-
-	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_trigger(unsigned ch)
-{
-	dma_async_issue_pending((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_flush(unsigned ch)
-{
-	return dmaengine_terminate_all((struct dma_chan *)ch);
-}
-
-static struct samsung_dma_ops dmadev_ops = {
-	.request	= samsung_dmadev_request,
-	.release	= samsung_dmadev_release,
-	.config		= samsung_dmadev_config,
-	.prepare	= samsung_dmadev_prepare,
-	.trigger	= samsung_dmadev_trigger,
-	.started	= NULL,
-	.flush		= samsung_dmadev_flush,
-	.stop		= samsung_dmadev_flush,
-};
-
-void *samsung_dmadev_get_ops(void)
-{
-	return &dmadev_ops;
-}
-EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c
deleted file mode 100644
index 6143aa147688..000000000000
--- a/arch/arm/plat-samsung/dma.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma.c
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c2410_dma_buf;
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
-
-/* s3c_dma_lookup_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return s3c_dma_chan_map[channel];
-}
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	chan->flags = flags;
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-samsung/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h
deleted file mode 100644
index 32ff2a92cb3c..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-core.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung S3C DMA core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
-
-extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
deleted file mode 100644
index ce6d7634b6cb..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma-ops.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_DMA_OPS_H_
-#define __SAMSUNG_DMA_OPS_H_ __FILE__
-
-#include <linux/dmaengine.h>
-#include <mach/dma.h>
-
-struct samsung_dma_req {
-	enum dma_transaction_type cap;
-	struct s3c2410_dma_client *client;
-};
-
-struct samsung_dma_prep {
-	enum dma_transaction_type cap;
-	enum dma_transfer_direction direction;
-	dma_addr_t buf;
-	unsigned long period;
-	unsigned long len;
-	void (*fp)(void *data);
-	void *fp_param;
-};
-
-struct samsung_dma_config {
-	enum dma_transfer_direction direction;
-	enum dma_slave_buswidth width;
-	dma_addr_t fifo;
-};
-
-struct samsung_dma_ops {
-	unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param,
-				struct device *dev, char *ch_name);
-	int (*release)(unsigned ch, void *param);
-	int (*config)(unsigned ch, struct samsung_dma_config *param);
-	int (*prepare)(unsigned ch, struct samsung_dma_prep *param);
-	int (*trigger)(unsigned ch);
-	int (*started)(unsigned ch);
-	int (*flush)(unsigned ch);
-	int (*stop)(unsigned ch);
-};
-
-extern void *samsung_dmadev_get_ops(void);
-extern void *s3c_dma_get_ops(void);
-
-static inline void *__samsung_dma_get_ops(void)
-{
-	if (samsung_dma_is_dmadev())
-		return samsung_dmadev_get_ops();
-	else
-		return s3c_dma_get_ops();
-}
-
-/*
- * samsung_dma_get_ops
- * get the set of samsung dma operations
- */
-#define samsung_dma_get_ops() __samsung_dma_get_ops()
-
-#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
deleted file mode 100644
index abe07fae71db..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DMA_PL330_H_
-#define __DMA_PL330_H_ __FILE__
-
-/*
- * PL330 can assign any channel to communicate with
- * any of the peripherals attched to the DMAC.
- * For the sake of consistency across client drivers,
- * We keep the channel names unchanged and only add
- * missing peripherals are added.
- * Order is not important since DMA PL330 API driver
- * use these just as IDs.
- */
-enum dma_ch {
-	DMACH_UART0_RX = 0,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_UART5_RX,
-	DMACH_UART5_TX,
-	DMACH_USI_RX,
-	DMACH_USI_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_EXTERNAL,
-	DMACH_PWM,
-	DMACH_SPDIF,
-	DMACH_HSI_RX,
-	DMACH_HSI_TX,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_PCM1_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM2_TX,
-	DMACH_PCM2_RX,
-	DMACH_MSM_REQ3,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ0,
-	DMACH_SLIMBUS0_RX,
-	DMACH_SLIMBUS0_TX,
-	DMACH_SLIMBUS0AUX_RX,
-	DMACH_SLIMBUS0AUX_TX,
-	DMACH_SLIMBUS1_RX,
-	DMACH_SLIMBUS1_TX,
-	DMACH_SLIMBUS2_RX,
-	DMACH_SLIMBUS2_TX,
-	DMACH_SLIMBUS3_RX,
-	DMACH_SLIMBUS3_TX,
-	DMACH_SLIMBUS4_RX,
-	DMACH_SLIMBUS4_TX,
-	DMACH_SLIMBUS5_RX,
-	DMACH_SLIMBUS5_TX,
-	DMACH_MIPI_HSI0,
-	DMACH_MIPI_HSI1,
-	DMACH_MIPI_HSI2,
-	DMACH_MIPI_HSI3,
-	DMACH_MIPI_HSI4,
-	DMACH_MIPI_HSI5,
-	DMACH_MIPI_HSI6,
-	DMACH_MIPI_HSI7,
-	DMACH_DISP1,
-	DMACH_MTOM_0,
-	DMACH_MTOM_1,
-	DMACH_MTOM_2,
-	DMACH_MTOM_3,
-	DMACH_MTOM_4,
-	DMACH_MTOM_5,
-	DMACH_MTOM_6,
-	DMACH_MTOM_7,
-	/* END Marker, also used to denote a reserved channel */
-	DMACH_MAX,
-};
-
-struct s3c2410_dma_client {
-	char	*name;
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return true;
-}
-
-#include <plat/dma-ops.h>
-
-#endif	/* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
deleted file mode 100644
index bd3a6db14cbb..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support - per SoC functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/dma-core.h>
-
-extern struct bus_type dma_subsys;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-
-	unsigned long		 channels[S3C_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
deleted file mode 100644
index 7b02143ccd9a..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#include <linux/dma-mapping.h>
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-struct s3c2410_dma_chan;
-enum dma_ch;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(enum dma_ch channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(enum dma_ch channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum dma_data_direction source, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(enum dma_ch channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
-
-#include <plat/dma-ops.h>
-
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h
deleted file mode 100644
index a7d622ef16af..000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_REGS_DMA_H
-#define __ASM_PLAT_REGS_DMA_H __FILE__
-
-#define S3C2410_DMA_DISRC		(0x00)
-#define S3C2410_DMA_DISRCC		(0x04)
-#define S3C2410_DMA_DIDST		(0x08)
-#define S3C2410_DMA_DIDSTC		(0x0C)
-#define S3C2410_DMA_DCON		(0x10)
-#define S3C2410_DMA_DSTAT		(0x14)
-#define S3C2410_DMA_DCSRC		(0x18)
-#define S3C2410_DMA_DCDST		(0x1C)
-#define S3C2410_DMA_DMASKTRIG		(0x20)
-#define S3C2412_DMA_DMAREQSEL		(0x24)
-#define S3C2443_DMA_DMAREQSEL		(0x24)
-
-#define S3C2410_DISRCC_INC		(1 << 0)
-#define S3C2410_DISRCC_APB		(1 << 1)
-
-#define S3C2410_DMASKTRIG_STOP		(1 << 2)
-#define S3C2410_DMASKTRIG_ON		(1 << 1)
-#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
-
-#define S3C2410_DCON_DEMAND		(0 << 31)
-#define S3C2410_DCON_HANDSHAKE		(1 << 31)
-#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
-#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
-
-#define S3C2410_DCON_INTREQ		(1 << 29)
-
-#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
-#define S3C2410_DCON_CH0_UART0		(1 << 24)
-#define S3C2410_DCON_CH0_SDI		(2 << 24)
-#define S3C2410_DCON_CH0_TIMER		(3 << 24)
-#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
-
-#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
-#define S3C2410_DCON_CH1_UART1		(1 << 24)
-#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
-#define S3C2410_DCON_CH1_SPI		(3 << 24)
-#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
-
-#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
-#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
-#define S3C2410_DCON_CH2_SDI		(2 << 24)
-#define S3C2410_DCON_CH2_TIMER		(3 << 24)
-#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
-
-#define S3C2410_DCON_CH3_UART2		(0 << 24)
-#define S3C2410_DCON_CH3_SDI		(1 << 24)
-#define S3C2410_DCON_CH3_SPI		(2 << 24)
-#define S3C2410_DCON_CH3_TIMER		(3 << 24)
-#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
-
-#define S3C2410_DCON_SRCSHIFT		(24)
-#define S3C2410_DCON_SRCMASK		(7 << 24)
-
-#define S3C2410_DCON_BYTE		(0 << 20)
-#define S3C2410_DCON_HALFWORD		(1 << 20)
-#define S3C2410_DCON_WORD		(2 << 20)
-
-#define S3C2410_DCON_AUTORELOAD		(0 << 22)
-#define S3C2410_DCON_NORELOAD		(1 << 22)
-#define S3C2410_DCON_HWTRIG		(1 << 23)
-
-#ifdef CONFIG_CPU_S3C2440
-
-#define S3C2440_DIDSTC_CHKINT		(1 << 2)
-
-#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
-#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
-
-#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
-#define S3C2440_DCON_CH1_SDI		(6 << 24)
-
-#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
-#define S3C2440_DCON_CH2_MICIN		(6 << 24)
-
-#define S3C2440_DCON_CH3_MICIN		(5 << 24)
-#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-#endif /* CONFIG_CPU_S3C2412 */
-
-#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443)
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-#endif /* CONFIG_CPU_S3C2443 */
-
-#endif /* __ASM_PLAT_REGS_DMA_H */
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
deleted file mode 100644
index 98b10ba67dc7..000000000000
--- a/arch/arm/plat-samsung/s3c-dma-ops.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung S3C-DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-struct cb_data {
-	void (*fp) (void *);
-	void *fp_param;
-	unsigned ch;
-	struct list_head node;
-};
-
-static LIST_HEAD(dma_list);
-
-static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
-		       int size, enum s3c2410_dma_buffresult res)
-{
-	struct cb_data *data = param;
-
-	data->fp(data->fp_param);
-}
-
-static unsigned s3c_dma_request(enum dma_ch dma_ch,
-				struct samsung_dma_req *param,
-				struct device *dev, char *ch_name)
-{
-	struct cb_data *data;
-
-	if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) {
-		s3c2410_dma_free(dma_ch, param->client);
-		return 0;
-	}
-
-	if (param->cap == DMA_CYCLIC)
-		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
-
-	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
-	data->ch = dma_ch;
-	list_add_tail(&data->node, &dma_list);
-
-	return (unsigned)dma_ch;
-}
-
-static int s3c_dma_release(unsigned ch, void *param)
-{
-	struct cb_data *data;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-	list_del(&data->node);
-
-	s3c2410_dma_free(ch, param);
-	kfree(data);
-
-	return 0;
-}
-
-static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param)
-{
-	s3c2410_dma_devconfig(ch, param->direction, param->fifo);
-	s3c2410_dma_config(ch, param->width);
-
-	return 0;
-}
-
-static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param)
-{
-	struct cb_data *data;
-	dma_addr_t pos = param->buf;
-	dma_addr_t end = param->buf + param->len;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-
-	if (!data->fp) {
-		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
-		data->fp = param->fp;
-		data->fp_param = param->fp_param;
-	}
-
-	if (param->cap != DMA_CYCLIC) {
-		s3c2410_dma_enqueue(ch, (void *)data, param->buf, param->len);
-		return 0;
-	}
-
-	while (pos < end) {
-		s3c2410_dma_enqueue(ch, (void *)data, pos, param->period);
-		pos += param->period;
-	}
-
-	return 0;
-}
-
-static inline int s3c_dma_trigger(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
-}
-
-static inline int s3c_dma_started(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
-}
-
-static inline int s3c_dma_flush(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
-}
-
-static inline int s3c_dma_stop(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
-}
-
-static struct samsung_dma_ops s3c_dma_ops = {
-	.request	= s3c_dma_request,
-	.release	= s3c_dma_release,
-	.config		= s3c_dma_config,
-	.prepare	= s3c_dma_prepare,
-	.trigger	= s3c_dma_trigger,
-	.started	= s3c_dma_started,
-	.flush		= s3c_dma_flush,
-	.stop		= s3c_dma_stop,
-};
-
-void *s3c_dma_get_ops(void)
-{
-	return &s3c_dma_ops;
-}
-EXPORT_SYMBOL(s3c_dma_get_ops);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f2b2c4e87aef..faf30a4e642b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -184,7 +184,7 @@ config TEGRA20_APB_DMA
 
 config S3C24XX_DMAC
 	tristate "Samsung S3C24XX DMA support"
-	depends on ARCH_S3C24XX && !S3C24XX_DMA
+	depends on ARCH_S3C24XX
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help