x86, olpc: Use pci subarch init for OLPC

Replace the #ifdef'ed OLPC-specific init functions by a conditional
x86_init function.  If the function returns 0 we leave pci_arch_init,
otherwise we continue.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Andres Salomon <dilinger@collabora.co.uk>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318CE89@orsmsx508.amr.corp.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

5 files changed, 13 insertions, 29 deletions

diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
index 3a57385d9fa7..101229b0d8ed 100644
--- a/arch/x86/include/asm/olpc.h
+++ b/arch/x86/include/asm/olpc.h
@@ -13,7 +13,6 @@ struct olpc_platform_t {
 
 #define OLPC_F_PRESENT		0x01
 #define OLPC_F_DCON		0x02
-#define OLPC_F_VSA		0x04
 
 #ifdef CONFIG_OLPC
 
@@ -51,18 +50,6 @@ static inline int olpc_has_dcon(void)
 }
 
 /*
- * The VSA is software from AMD that typical Geode bioses will include.
- * It is used to emulate the PCI bus, VGA, etc.  OLPC's Open Firmware does
- * not include the VSA; instead, PCI is emulated by the kernel.
- *
- * The VSA is described further in arch/x86/pci/olpc.c.
- */
-static inline int olpc_has_vsa(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-}
-
-/*
  * The "Mass Production" version of OLPC's XO is identified as being model
  * C2.  During the prototype phase, the following models (in chronological
  * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
@@ -87,13 +74,10 @@ static inline int olpc_has_dcon(void)
 	return 0;
 }
 
-static inline int olpc_has_vsa(void)
-{
-	return 0;
-}
-
 #endif
 
+extern int pci_olpc_init(void);
+
 /* EC related functions */
 
 extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 6e69edfbf074..36085518badb 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -104,7 +104,6 @@ extern bool port_cf9_safe;
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
-extern int pci_olpc_init(void);
 extern void __init dmi_check_pciprobe(void);
 extern void __init dmi_check_skip_isa_align(void);
 
diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
index 9d1d263f786f..8297160c41b3 100644
--- a/arch/x86/kernel/olpc.c
+++ b/arch/x86/kernel/olpc.c
@@ -17,7 +17,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/string.h>
+
 #include <asm/geode.h>
+#include <asm/setup.h>
 #include <asm/olpc.h>
 
 #ifdef CONFIG_OPEN_FIRMWARE
@@ -243,9 +245,11 @@ static int __init olpc_init(void)
 	olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
 			(unsigned char *) &olpc_platform_info.ecver, 1);
 
-	/* check to see if the VSA exists */
-	if (cs5535_has_vsa2())
-		olpc_platform_info.flags |= OLPC_F_VSA;
+#ifdef CONFIG_PCI_OLPC
+	/* If the VSA exists let it emulate PCI, if not emulate in kernel */
+	if (!cs5535_has_vsa2())
+		x86_init.pci.arch_init = pci_olpc_init;
+#endif
 
 	printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
 			((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index 25a1f8efed4a..adb62aaa7ecd 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -1,6 +1,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <asm/pci_x86.h>
+#include <asm/x86_init.h>
 
 /* arch_initcall has too random ordering, so call the initializers
    in the right sequence from here. */
@@ -15,10 +16,9 @@ static __init int pci_arch_init(void)
 	if (!(pci_probe & PCI_PROBE_NOEARLY))
 		pci_mmcfg_early_init();
 
-#ifdef CONFIG_PCI_OLPC
-	if (!pci_olpc_init())
-		return 0;	/* skip additional checks if it's an XO */
-#endif
+	if (x86_init.pci.arch_init && !x86_init.pci.arch_init())
+		return 0;
+
 #ifdef CONFIG_PCI_BIOS
 	pci_pcbios_init();
 #endif
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index b889d824f7c6..b34815408f58 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -304,9 +304,6 @@ static struct pci_raw_ops pci_olpc_conf = {
 
 int __init pci_olpc_init(void)
 {
-	if (!machine_is_olpc() || olpc_has_vsa())
-		return -ENODEV;
-
 	printk(KERN_INFO "PCI: Using configuration type OLPC\n");
 	raw_pci_ops = &pci_olpc_conf;
 	is_lx = is_geode_lx();