rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver

This patch adds the Spreadtrum RTC driver, which embedded in the
Spreadtrum SC27xx series PMICs.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

3 files changed, 674 insertions, 0 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 47663e03f9a8..b59a31b079a5 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1187,6 +1187,17 @@ config RTC_DRV_WM8350
 	  This driver can also be built as a module. If so, the module
 	  will be called "rtc-wm8350".
 
+config RTC_DRV_SC27XX
+	tristate "Spreadtrum SC27xx RTC"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	help
+	  If you say Y here you will get support for the RTC subsystem
+	  of the Spreadtrum SC27xx series PMICs. The SC27xx series PMICs
+	  includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-sc27xx.
+
 config RTC_DRV_SPEAR
 	tristate "SPEAR ST RTC"
 	depends on PLAT_SPEAR || COMPILE_TEST
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 0b5acd6b5cc3..5cf6b0a44f01 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
 obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
 obj-$(CONFIG_RTC_DRV_S5M)	+= rtc-s5m.o
 obj-$(CONFIG_RTC_DRV_SA1100)	+= rtc-sa1100.o
+obj-$(CONFIG_RTC_DRV_SC27XX)	+= rtc-sc27xx.o
 obj-$(CONFIG_RTC_DRV_SH)	+= rtc-sh.o
 obj-$(CONFIG_RTC_DRV_SIRFSOC)	+= rtc-sirfsoc.o
 obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
diff --git a/drivers/rtc/rtc-sc27xx.c b/drivers/rtc/rtc-sc27xx.c
new file mode 100644
index 000000000000..d544d5268757
--- /dev/null
+++ b/drivers/rtc/rtc-sc27xx.c
@@ -0,0 +1,662 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define SPRD_RTC_SEC_CNT_VALUE		0x0
+#define SPRD_RTC_MIN_CNT_VALUE		0x4
+#define SPRD_RTC_HOUR_CNT_VALUE		0x8
+#define SPRD_RTC_DAY_CNT_VALUE		0xc
+#define SPRD_RTC_SEC_CNT_UPD		0x10
+#define SPRD_RTC_MIN_CNT_UPD		0x14
+#define SPRD_RTC_HOUR_CNT_UPD		0x18
+#define SPRD_RTC_DAY_CNT_UPD		0x1c
+#define SPRD_RTC_SEC_ALM_UPD		0x20
+#define SPRD_RTC_MIN_ALM_UPD		0x24
+#define SPRD_RTC_HOUR_ALM_UPD		0x28
+#define SPRD_RTC_DAY_ALM_UPD		0x2c
+#define SPRD_RTC_INT_EN			0x30
+#define SPRD_RTC_INT_RAW_STS		0x34
+#define SPRD_RTC_INT_CLR		0x38
+#define SPRD_RTC_INT_MASK_STS		0x3C
+#define SPRD_RTC_SEC_ALM_VALUE		0x40
+#define SPRD_RTC_MIN_ALM_VALUE		0x44
+#define SPRD_RTC_HOUR_ALM_VALUE		0x48
+#define SPRD_RTC_DAY_ALM_VALUE		0x4c
+#define SPRD_RTC_SPG_VALUE		0x50
+#define SPRD_RTC_SPG_UPD		0x54
+#define SPRD_RTC_SEC_AUXALM_UPD		0x60
+#define SPRD_RTC_MIN_AUXALM_UPD		0x64
+#define SPRD_RTC_HOUR_AUXALM_UPD	0x68
+#define SPRD_RTC_DAY_AUXALM_UPD		0x6c
+
+/* BIT & MASK definition for SPRD_RTC_INT_* registers */
+#define SPRD_RTC_SEC_EN			BIT(0)
+#define SPRD_RTC_MIN_EN			BIT(1)
+#define SPRD_RTC_HOUR_EN		BIT(2)
+#define SPRD_RTC_DAY_EN			BIT(3)
+#define SPRD_RTC_ALARM_EN		BIT(4)
+#define SPRD_RTC_HRS_FORMAT_EN		BIT(5)
+#define SPRD_RTC_AUXALM_EN		BIT(6)
+#define SPRD_RTC_SPG_UPD_EN		BIT(7)
+#define SPRD_RTC_SEC_UPD_EN		BIT(8)
+#define SPRD_RTC_MIN_UPD_EN		BIT(9)
+#define SPRD_RTC_HOUR_UPD_EN		BIT(10)
+#define SPRD_RTC_DAY_UPD_EN		BIT(11)
+#define SPRD_RTC_ALMSEC_UPD_EN		BIT(12)
+#define SPRD_RTC_ALMMIN_UPD_EN		BIT(13)
+#define SPRD_RTC_ALMHOUR_UPD_EN		BIT(14)
+#define SPRD_RTC_ALMDAY_UPD_EN		BIT(15)
+#define SPRD_RTC_INT_MASK		GENMASK(15, 0)
+
+#define SPRD_RTC_TIME_INT_MASK				\
+	(SPRD_RTC_SEC_UPD_EN | SPRD_RTC_MIN_UPD_EN |	\
+	 SPRD_RTC_HOUR_UPD_EN | SPRD_RTC_DAY_UPD_EN)
+
+#define SPRD_RTC_ALMTIME_INT_MASK				\
+	(SPRD_RTC_ALMSEC_UPD_EN | SPRD_RTC_ALMMIN_UPD_EN |	\
+	 SPRD_RTC_ALMHOUR_UPD_EN | SPRD_RTC_ALMDAY_UPD_EN)
+
+#define SPRD_RTC_ALM_INT_MASK			\
+	(SPRD_RTC_SEC_EN | SPRD_RTC_MIN_EN |	\
+	 SPRD_RTC_HOUR_EN | SPRD_RTC_DAY_EN |	\
+	 SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN)
+
+/* second/minute/hour/day values mask definition */
+#define SPRD_RTC_SEC_MASK		GENMASK(5, 0)
+#define SPRD_RTC_MIN_MASK		GENMASK(5, 0)
+#define SPRD_RTC_HOUR_MASK		GENMASK(4, 0)
+#define SPRD_RTC_DAY_MASK		GENMASK(15, 0)
+
+/* alarm lock definition for SPRD_RTC_SPG_UPD register */
+#define SPRD_RTC_ALMLOCK_MASK		GENMASK(7, 0)
+#define SPRD_RTC_ALM_UNLOCK		0xa5
+#define SPRD_RTC_ALM_LOCK		(~SPRD_RTC_ALM_UNLOCK &	\
+					 SPRD_RTC_ALMLOCK_MASK)
+
+/* SPG values definition for SPRD_RTC_SPG_UPD register */
+#define SPRD_RTC_POWEROFF_ALM_FLAG	BIT(8)
+#define SPRD_RTC_POWER_RESET_FLAG	BIT(9)
+
+/* timeout of synchronizing time and alarm registers (us) */
+#define SPRD_RTC_POLL_TIMEOUT		200000
+#define SPRD_RTC_POLL_DELAY_US		20000
+
+struct sprd_rtc {
+	struct rtc_device	*rtc;
+	struct regmap		*regmap;
+	struct device		*dev;
+	u32			base;
+	int			irq;
+	bool			valid;
+};
+
+/*
+ * The Spreadtrum RTC controller has 3 groups registers, including time, normal
+ * alarm and auxiliary alarm. The time group registers are used to set RTC time,
+ * the normal alarm registers are used to set normal alarm, and the auxiliary
+ * alarm registers are used to set auxiliary alarm. Both alarm event and
+ * auxiliary alarm event can wake up system from deep sleep, but only alarm
+ * event can power up system from power down status.
+ */
+enum sprd_rtc_reg_types {
+	SPRD_RTC_TIME,
+	SPRD_RTC_ALARM,
+	SPRD_RTC_AUX_ALARM,
+};
+
+static int sprd_rtc_clear_alarm_ints(struct sprd_rtc *rtc)
+{
+	return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
+			    SPRD_RTC_ALM_INT_MASK);
+}
+
+static int sprd_rtc_disable_ints(struct sprd_rtc *rtc)
+{
+	int ret;
+
+	ret = regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN,
+				 SPRD_RTC_INT_MASK, 0);
+	if (ret)
+		return ret;
+
+	return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
+			    SPRD_RTC_INT_MASK);
+}
+
+static int sprd_rtc_lock_alarm(struct sprd_rtc *rtc, bool lock)
+{
+	int ret;
+	u32 val;
+
+	ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val);
+	if (ret)
+		return ret;
+
+	val &= ~(SPRD_RTC_ALMLOCK_MASK | SPRD_RTC_POWEROFF_ALM_FLAG);
+	if (lock)
+		val |= SPRD_RTC_ALM_LOCK;
+	else
+		val |= SPRD_RTC_ALM_UNLOCK | SPRD_RTC_POWEROFF_ALM_FLAG;
+
+	ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_SPG_UPD, val);
+	if (ret)
+		return ret;
+
+	/* wait until the SPG value is updated successfully */
+	ret = regmap_read_poll_timeout(rtc->regmap,
+				       rtc->base + SPRD_RTC_INT_RAW_STS, val,
+				       (val & SPRD_RTC_SPG_UPD_EN),
+				       SPRD_RTC_POLL_DELAY_US,
+				       SPRD_RTC_POLL_TIMEOUT);
+	if (ret) {
+		dev_err(rtc->dev, "failed to update SPG value:%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sprd_rtc_get_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type,
+			     time64_t *secs)
+{
+	u32 sec_reg, min_reg, hour_reg, day_reg;
+	u32 val, sec, min, hour, day;
+	int ret;
+
+	switch (type) {
+	case SPRD_RTC_TIME:
+		sec_reg = SPRD_RTC_SEC_CNT_VALUE;
+		min_reg = SPRD_RTC_MIN_CNT_VALUE;
+		hour_reg = SPRD_RTC_HOUR_CNT_VALUE;
+		day_reg = SPRD_RTC_DAY_CNT_VALUE;
+		break;
+	case SPRD_RTC_ALARM:
+		sec_reg = SPRD_RTC_SEC_ALM_VALUE;
+		min_reg = SPRD_RTC_MIN_ALM_VALUE;
+		hour_reg = SPRD_RTC_HOUR_ALM_VALUE;
+		day_reg = SPRD_RTC_DAY_ALM_VALUE;
+		break;
+	case SPRD_RTC_AUX_ALARM:
+		sec_reg = SPRD_RTC_SEC_AUXALM_UPD;
+		min_reg = SPRD_RTC_MIN_AUXALM_UPD;
+		hour_reg = SPRD_RTC_HOUR_AUXALM_UPD;
+		day_reg = SPRD_RTC_DAY_AUXALM_UPD;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_read(rtc->regmap, rtc->base + sec_reg, &val);
+	if (ret)
+		return ret;
+
+	sec = val & SPRD_RTC_SEC_MASK;
+
+	ret = regmap_read(rtc->regmap, rtc->base + min_reg, &val);
+	if (ret)
+		return ret;
+
+	min = val & SPRD_RTC_MIN_MASK;
+
+	ret = regmap_read(rtc->regmap, rtc->base + hour_reg, &val);
+	if (ret)
+		return ret;
+
+	hour = val & SPRD_RTC_HOUR_MASK;
+
+	ret = regmap_read(rtc->regmap, rtc->base + day_reg, &val);
+	if (ret)
+		return ret;
+
+	day = val & SPRD_RTC_DAY_MASK;
+	*secs = (((time64_t)(day * 24) + hour) * 60 + min) * 60 + sec;
+	return 0;
+}
+
+static int sprd_rtc_set_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type,
+			     time64_t secs)
+{
+	u32 sec_reg, min_reg, hour_reg, day_reg, sts_mask;
+	u32 sec, min, hour, day, val;
+	int ret, rem;
+
+	/* convert seconds to RTC time format */
+	day = div_s64_rem(secs, 86400, &rem);
+	hour = rem / 3600;
+	rem -= hour * 3600;
+	min = rem / 60;
+	sec = rem - min * 60;
+
+	switch (type) {
+	case SPRD_RTC_TIME:
+		sec_reg = SPRD_RTC_SEC_CNT_UPD;
+		min_reg = SPRD_RTC_MIN_CNT_UPD;
+		hour_reg = SPRD_RTC_HOUR_CNT_UPD;
+		day_reg = SPRD_RTC_DAY_CNT_UPD;
+		sts_mask = SPRD_RTC_TIME_INT_MASK;
+		break;
+	case SPRD_RTC_ALARM:
+		sec_reg = SPRD_RTC_SEC_ALM_UPD;
+		min_reg = SPRD_RTC_MIN_ALM_UPD;
+		hour_reg = SPRD_RTC_HOUR_ALM_UPD;
+		day_reg = SPRD_RTC_DAY_ALM_UPD;
+		sts_mask = SPRD_RTC_ALMTIME_INT_MASK;
+		break;
+	case SPRD_RTC_AUX_ALARM:
+		sec_reg = SPRD_RTC_SEC_AUXALM_UPD;
+		min_reg = SPRD_RTC_MIN_AUXALM_UPD;
+		hour_reg = SPRD_RTC_HOUR_AUXALM_UPD;
+		day_reg = SPRD_RTC_DAY_AUXALM_UPD;
+		sts_mask = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_write(rtc->regmap, rtc->base + sec_reg, sec);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(rtc->regmap, rtc->base + min_reg, min);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(rtc->regmap, rtc->base + hour_reg, hour);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(rtc->regmap, rtc->base + day_reg, day);
+	if (ret)
+		return ret;
+
+	if (type == SPRD_RTC_AUX_ALARM)
+		return 0;
+
+	/*
+	 * Since the time and normal alarm registers are put in always-power-on
+	 * region supplied by VDDRTC, then these registers changing time will
+	 * be very long, about 125ms. Thus here we should wait until all
+	 * values are updated successfully.
+	 */
+	ret = regmap_read_poll_timeout(rtc->regmap,
+				       rtc->base + SPRD_RTC_INT_RAW_STS, val,
+				       ((val & sts_mask) == sts_mask),
+				       SPRD_RTC_POLL_DELAY_US,
+				       SPRD_RTC_POLL_TIMEOUT);
+	if (ret < 0) {
+		dev_err(rtc->dev, "set time/alarm values timeout\n");
+		return ret;
+	}
+
+	return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
+			    sts_mask);
+}
+
+static int sprd_rtc_read_aux_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct sprd_rtc *rtc = dev_get_drvdata(dev);
+	time64_t secs;
+	u32 val;
+	int ret;
+
+	ret = sprd_rtc_get_secs(rtc, SPRD_RTC_AUX_ALARM, &secs);
+	if (ret)
+		return ret;
+
+	rtc_time64_to_tm(secs, &alrm->time);
+
+	ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, &val);
+	if (ret)
+		return ret;
+
+	alrm->enabled = !!(val & SPRD_RTC_AUXALM_EN);
+
+	ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_RAW_STS, &val);
+	if (ret)
+		return ret;
+
+	alrm->pending = !!(val & SPRD_RTC_AUXALM_EN);
+	return 0;
+}
+
+static int sprd_rtc_set_aux_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct sprd_rtc *rtc = dev_get_drvdata(dev);
+	time64_t secs = rtc_tm_to_time64(&alrm->time);
+	int ret;
+
+	/* clear the auxiliary alarm interrupt status */
+	ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
+			   SPRD_RTC_AUXALM_EN);
+	if (ret)
+		return ret;
+
+	ret = sprd_rtc_set_secs(rtc, SPRD_RTC_AUX_ALARM, secs);
+	if (ret)
+		return ret;
+
+	if (alrm->enabled) {
+		ret = regmap_update_bits(rtc->regmap,
+					 rtc->base + SPRD_RTC_INT_EN,
+					 SPRD_RTC_AUXALM_EN,
+					 SPRD_RTC_AUXALM_EN);
+	} else {
+		ret = regmap_update_bits(rtc->regmap,
+					 rtc->base + SPRD_RTC_INT_EN,
+					 SPRD_RTC_AUXALM_EN, 0);
+	}
+
+	return ret;
+}
+
+static int sprd_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct sprd_rtc *rtc = dev_get_drvdata(dev);
+	time64_t secs;
+	int ret;
+
+	if (!rtc->valid) {
+		dev_warn(dev, "RTC values are invalid\n");
+		return -EINVAL;
+	}
+
+	ret = sprd_rtc_get_secs(rtc, SPRD_RTC_TIME, &secs);
+	if (ret)
+		return ret;
+
+	rtc_time64_to_tm(secs, tm);
+	return rtc_valid_tm(tm);
+}
+
+static int sprd_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct sprd_rtc *rtc = dev_get_drvdata(dev);
+	time64_t secs = rtc_tm_to_time64(tm);
+	u32 val;
+	int ret;
+
+	ret = sprd_rtc_set_secs(rtc, SPRD_RTC_TIME, secs);
+	if (ret)
+		return ret;
+
+	if (!rtc->valid) {
+		/*
+		 * Set SPRD_RTC_POWER_RESET_FLAG to indicate now RTC has valid
+		 * time values.
+		 */
+		ret = regmap_update_bits(rtc->regmap,
+					 rtc->base + SPRD_RTC_SPG_UPD,
+					 SPRD_RTC_POWER_RESET_FLAG,
+					 SPRD_RTC_POWER_RESET_FLAG);
+		if (ret)
+			return ret;
+
+		ret = regmap_read_poll_timeout(rtc->regmap,
+					       rtc->base + SPRD_RTC_INT_RAW_STS,
+					       val, (val & SPRD_RTC_SPG_UPD_EN),
+					       SPRD_RTC_POLL_DELAY_US,
+					       SPRD_RTC_POLL_TIMEOUT);
+		if (ret) {
+			dev_err(rtc->dev, "failed to update SPG value:%d\n",
+				ret);
+			return ret;
+		}
+
+		rtc->valid = true;
+	}
+
+	return 0;
+}
+
+static int sprd_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct sprd_rtc *rtc = dev_get_drvdata(dev);
+	time64_t secs;
+	int ret;
+	u32 val;
+
+	/*
+	 * If aie_timer is enabled, we should get the normal alarm time.
+	 * Otherwise we should get auxiliary alarm time.
+	 */
+	if (rtc->rtc && rtc->rtc->aie_timer.enabled == 0)
+		return sprd_rtc_read_aux_alarm(dev, alrm);
+
+	ret = sprd_rtc_get_secs(rtc, SPRD_RTC_ALARM, &secs);
+	if (ret)
+		return ret;
+
+	rtc_time64_to_tm(secs, &alrm->time);
+
+	ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, &val);
+	if (ret)
+		return ret;
+
+	alrm->enabled = !!(val & SPRD_RTC_ALARM_EN);
+
+	ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_RAW_STS, &val);
+	if (ret)
+		return ret;
+
+	alrm->pending = !!(val & SPRD_RTC_ALARM_EN);
+	return 0;
+}
+
+static int sprd_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct sprd_rtc *rtc = dev_get_drvdata(dev);
+	time64_t secs = rtc_tm_to_time64(&alrm->time);
+	struct rtc_time aie_time =
+		rtc_ktime_to_tm(rtc->rtc->aie_timer.node.expires);
+	int ret;
+
+	/*
+	 * We have 2 groups alarms: normal alarm and auxiliary alarm. Since
+	 * both normal alarm event and auxiliary alarm event can wake up system
+	 * from deep sleep, but only alarm event can power up system from power
+	 * down status. Moreover we do not need to poll about 125ms when
+	 * updating auxiliary alarm registers. Thus we usually set auxiliary
+	 * alarm when wake up system from deep sleep, and for other scenarios,
+	 * we should set normal alarm with polling status.
+	 *
+	 * So here we check if the alarm time is set by aie_timer, if yes, we
+	 * should set normal alarm, if not, we should set auxiliary alarm which
+	 * means it is just a wake event.
+	 */
+	if (!rtc->rtc->aie_timer.enabled || rtc_tm_sub(&aie_time, &alrm->time))
+		return sprd_rtc_set_aux_alarm(dev, alrm);
+
+	/* clear the alarm interrupt status firstly */
+	ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
+			   SPRD_RTC_ALARM_EN);
+	if (ret)
+		return ret;
+
+	ret = sprd_rtc_set_secs(rtc, SPRD_RTC_ALARM, secs);
+	if (ret)
+		return ret;
+
+	if (alrm->enabled) {
+		ret = regmap_update_bits(rtc->regmap,
+					 rtc->base + SPRD_RTC_INT_EN,
+					 SPRD_RTC_ALARM_EN,
+					 SPRD_RTC_ALARM_EN);
+		if (ret)
+			return ret;
+
+		/* unlock the alarm to enable the alarm function. */
+		ret = sprd_rtc_lock_alarm(rtc, false);
+	} else {
+		regmap_update_bits(rtc->regmap,
+				   rtc->base + SPRD_RTC_INT_EN,
+				   SPRD_RTC_ALARM_EN, 0);
+
+		/*
+		 * Lock the alarm function in case fake alarm event will power
+		 * up systems.
+		 */
+		ret = sprd_rtc_lock_alarm(rtc, true);
+	}
+
+	return ret;
+}
+
+static int sprd_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct sprd_rtc *rtc = dev_get_drvdata(dev);
+	int ret;
+
+	if (enabled) {
+		ret = regmap_update_bits(rtc->regmap,
+					 rtc->base + SPRD_RTC_INT_EN,
+					 SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN,
+					 SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN);
+		if (ret)
+			return ret;
+
+		ret = sprd_rtc_lock_alarm(rtc, false);
+	} else {
+		regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN,
+				   SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN, 0);
+
+		ret = sprd_rtc_lock_alarm(rtc, true);
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops sprd_rtc_ops = {
+	.read_time = sprd_rtc_read_time,
+	.set_time = sprd_rtc_set_time,
+	.read_alarm = sprd_rtc_read_alarm,
+	.set_alarm = sprd_rtc_set_alarm,
+	.alarm_irq_enable = sprd_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t sprd_rtc_handler(int irq, void *dev_id)
+{
+	struct sprd_rtc *rtc = dev_id;
+	int ret;
+
+	ret = sprd_rtc_clear_alarm_ints(rtc);
+	if (ret)
+		return IRQ_RETVAL(ret);
+
+	rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF);
+	return IRQ_HANDLED;
+}
+
+static int sprd_rtc_check_power_down(struct sprd_rtc *rtc)
+{
+	u32 val;
+	int ret;
+
+	ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * If the SPRD_RTC_POWER_RESET_FLAG was not set, which means the RTC has
+	 * been powered down, so the RTC time values are invalid.
+	 */
+	rtc->valid = (val & SPRD_RTC_POWER_RESET_FLAG) ? true : false;
+	return 0;
+}
+
+static int sprd_rtc_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct sprd_rtc *rtc;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!rtc->regmap)
+		return -ENODEV;
+
+	ret = of_property_read_u32(node, "reg", &rtc->base);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get RTC base address\n");
+		return ret;
+	}
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0) {
+		dev_err(&pdev->dev, "failed to get RTC irq number\n");
+		return rtc->irq;
+	}
+
+	rtc->dev = &pdev->dev;
+	platform_set_drvdata(pdev, rtc);
+
+	/* clear all RTC interrupts and disable all RTC interrupts */
+	ret = sprd_rtc_disable_ints(rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to disable RTC interrupts\n");
+		return ret;
+	}
+
+	/* check if RTC time values are valid */
+	ret = sprd_rtc_check_power_down(rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to check RTC time values\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+					sprd_rtc_handler,
+					IRQF_ONESHOT | IRQF_EARLY_RESUME,
+					pdev->name, rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request RTC irq\n");
+		return ret;
+	}
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					    &sprd_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc))
+		return PTR_ERR(rtc->rtc);
+
+	device_init_wakeup(&pdev->dev, 1);
+	return 0;
+}
+
+static int sprd_rtc_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+	return 0;
+}
+
+static const struct of_device_id sprd_rtc_of_match[] = {
+	{ .compatible = "sprd,sc2731-rtc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sprd_rtc_of_match);
+
+static struct platform_driver sprd_rtc_driver = {
+	.driver = {
+		.name = "sprd-rtc",
+		.of_match_table = sprd_rtc_of_match,
+	},
+	.probe	= sprd_rtc_probe,
+	.remove = sprd_rtc_remove,
+};
+module_platform_driver(sprd_rtc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Spreadtrum RTC Device Driver");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");