1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: PCIe RC controller on Intel Gateway SoCs
maintainers:
- Dilip Kota <eswara.kota@linux.intel.com>
properties:
compatible:
items:
- const: intel,lgm-pcie
- const: snps,dw-pcie
device_type:
const: pci
"#address-cells":
const: 3
"#size-cells":
const: 2
reg:
items:
- description: Controller control and status registers.
- description: PCIe configuration registers.
- description: Controller application registers.
reg-names:
items:
- const: dbi
- const: config
- const: app
ranges:
maxItems: 1
resets:
maxItems: 1
clocks:
maxItems: 1
phys:
maxItems: 1
phy-names:
const: pcie
reset-gpios:
maxItems: 1
linux,pci-domain: true
num-lanes:
maximum: 2
description: Number of lanes to use for this port.
'#interrupt-cells':
const: 1
interrupt-map-mask:
description: Standard PCI IRQ mapping properties.
interrupt-map:
description: Standard PCI IRQ mapping properties.
max-link-speed:
description: Specify PCI Gen for link capability.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 1, 2, 3, 4 ]
- default: 1
bus-range:
description: Range of bus numbers associated with this controller.
reset-assert-ms:
description: |
Delay after asserting reset to the PCIe device.
maximum: 500
default: 100
required:
- compatible
- device_type
- "#address-cells"
- "#size-cells"
- reg
- reg-names
- ranges
- resets
- clocks
- phys
- phy-names
- reset-gpios
- '#interrupt-cells'
- interrupt-map
- interrupt-map-mask
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/intel,lgm-clk.h>
pcie10: pcie@d0e00000 {
compatible = "intel,lgm-pcie", "snps,dw-pcie";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
reg = <0xd0e00000 0x1000>,
<0xd2000000 0x800000>,
<0xd0a41000 0x1000>;
reg-names = "dbi", "config", "app";
linux,pci-domain = <0>;
max-link-speed = <4>;
bus-range = <0x00 0x08>;
interrupt-parent = <&ioapic1>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &ioapic1 27 1>,
<0 0 0 2 &ioapic1 28 1>,
<0 0 0 3 &ioapic1 29 1>,
<0 0 0 4 &ioapic1 30 1>;
ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
resets = <&rcu0 0x50 0>;
clocks = <&cgu0 LGM_GCLK_PCIE10>;
phys = <&cb0phy0>;
phy-names = "pcie";
reset-assert-ms = <500>;
reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
num-lanes = <2>;
};
|
