/* * wm8903.c -- WM8903 ALSA SoC Audio driver * * Copyright 2008-12 Wolfson Microelectronics * Copyright 2011-2012 NVIDIA, Inc. * * Author: Mark Brown * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * TODO: * - TDM mode configuration. * - Digital microphone support. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "wm8903.h" /* Register defaults at reset */ static const struct reg_default wm8903_reg_defaults[] = { { 4, 0x0018 }, /* R4 - Bias Control 0 */ { 5, 0x0000 }, /* R5 - VMID Control 0 */ { 6, 0x0000 }, /* R6 - Mic Bias Control 0 */ { 8, 0x0001 }, /* R8 - Analogue DAC 0 */ { 10, 0x0001 }, /* R10 - Analogue ADC 0 */ { 12, 0x0000 }, /* R12 - Power Management 0 */ { 13, 0x0000 }, /* R13 - Power Management 1 */ { 14, 0x0000 }, /* R14 - Power Management 2 */ { 15, 0x0000 }, /* R15 - Power Management 3 */ { 16, 0x0000 }, /* R16 - Power Management 4 */ { 17, 0x0000 }, /* R17 - Power Management 5 */ { 18, 0x0000 }, /* R18 - Power Management 6 */ { 20, 0x0400 }, /* R20 - Clock Rates 0 */ { 21, 0x0D07 }, /* R21 - Clock Rates 1 */ { 22, 0x0000 }, /* R22 - Clock Rates 2 */ { 24, 0x0050 }, /* R24 - Audio Interface 0 */ { 25, 0x0242 }, /* R25 - Audio Interface 1 */ { 26, 0x0008 }, /* R26 - Audio Interface 2 */ { 27, 0x0022 }, /* R27 - Audio Interface 3 */ { 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */ { 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */ { 32, 0x0000 }, /* R32 - DAC Digital 0 */ { 33, 0x0000 }, /* R33 - DAC Digital 1 */ { 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */ { 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */ { 38, 0x0000 }, /* R38 - ADC Digital 0 */ { 39, 0x0073 }, /* R39 - Digital Microphone 0 */ { 40, 0x09BF }, /* R40 - DRC 0 */ { 41, 0x3241 }, /* R41 - DRC 1 */ { 42, 0x0020 }, /* R42 - DRC 2 */ { 43, 0x0000 }, /* R43 - DRC 3 */ { 44, 0x0085 }, /* R44 - Analogue Left Input 0 */ { 45, 0x0085 }, /* R45 - Analogue Right Input 0 */ { 46, 0x0044 }, /* R46 - Analogue Left Input 1 */ { 47, 0x0044 }, /* R47 - Analogue Right Input 1 */ { 50, 0x0008 }, /* R50 - Analogue Left Mix 0 */ { 51, 0x0004 }, /* R51 - Analogue Right Mix 0 */ { 52, 0x0000 }, /* R52 - Analogue Spk Mix Left 0 */ { 53, 0x0000 }, /* R53 - Analogue Spk Mix Left 1 */ { 54, 0x0000 }, /* R54 - Analogue Spk Mix Right 0 */ { 55, 0x0000 }, /* R55 - Analogue Spk Mix Right 1 */ { 57, 0x002D }, /* R57 - Analogue OUT1 Left */ { 58, 0x002D }, /* R58 - Analogue OUT1 Right */ { 59, 0x0039 }, /* R59 - Analogue OUT2 Left */ { 60, 0x0039 }, /* R60 - Analogue OUT2 Right */ { 62, 0x0139 }, /* R62 - Analogue OUT3 Left */ { 63, 0x0139 }, /* R63 - Analogue OUT3 Right */ { 64, 0x0000 }, /* R65 - Analogue SPK Output Control 0 */ { 67, 0x0010 }, /* R67 - DC Servo 0 */ { 69, 0x00A4 }, /* R69 - DC Servo 2 */ { 90, 0x0000 }, /* R90 - Analogue HP 0 */ { 94, 0x0000 }, /* R94 - Analogue Lineout 0 */ { 98, 0x0000 }, /* R98 - Charge Pump 0 */ { 104, 0x0000 }, /* R104 - Class W 0 */ { 108, 0x0000 }, /* R108 - Write Sequencer 0 */ { 109, 0x0000 }, /* R109 - Write Sequencer 1 */ { 110, 0x0000 }, /* R110 - Write Sequencer 2 */ { 111, 0x0000 }, /* R111 - Write Sequencer 3 */ { 112, 0x0000 }, /* R112 - Write Sequencer 4 */ { 114, 0x0000 }, /* R114 - Control Interface */ { 116, 0x00A8 }, /* R116 - GPIO Control 1 */ { 117, 0x00A8 }, /* R117 - GPIO Control 2 */ { 118, 0x00A8 }, /* R118 - GPIO Control 3 */ { 119, 0x0220 }, /* R119 - GPIO Control 4 */ { 120, 0x01A0 }, /* R120 - GPIO Control 5 */ { 122, 0xFFFF }, /* R122 - Interrupt Status 1 Mask */ { 123, 0x0000 }, /* R123 - Interrupt Polarity 1 */ { 126, 0x0000 }, /* R126 - Interrupt Control */ { 129, 0x0000 }, /* R129 - Control Interface Test 1 */ { 149, 0x6810 }, /* R149 - Charge Pump Test 1 */ { 164, 0x0028 }, /* R164 - Clock Rate Test 4 */ { 172, 0x0000 }, /* R172 - Analogue Output Bias 0 */ }; struct wm8903_priv { struct wm8903_platform_data *pdata; struct device *dev; struct regmap *regmap; int sysclk; int irq; struct mutex lock; int fs; int deemph; int dcs_pending; int dcs_cache[4]; /* Reference count */ int class_w_users; struct snd_soc_jack *mic_jack; int mic_det; int mic_short; int mic_last_report; int mic_delay; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio_chip; #endif }; static bool wm8903_readable_register(struct device *dev, unsigned int reg) { switch (reg) { case WM8903_SW_RESET_AND_ID: case WM8903_REVISION_NUMBER: case WM8903_BIAS_CONTROL_0: case WM8903_VMID_CONTROL_0: case WM8903_MIC_BIAS_CONTROL_0: case WM8903_ANALOGUE_DAC_0: case WM8903_ANALOGUE_ADC_0: case WM8903_POWER_MANAGEMENT_0: case WM8903_POWER_MANAGEMENT_1: case WM8903_POWER_MANAGEMENT_2: case WM8903_POWER_MANAGEMENT_3: case WM8903_POWER_MANAGEMENT_4: case WM8903_POWER_MANAGEMENT_5: case WM8903_POWER_MANAGEMENT_6: case WM8903_CLOCK_RATES_0: case WM8903_CLOCK_RATES_1: case WM8903_CLOCK_RATES_2: case WM8903_AUDIO_INTERFACE_0: case WM8903_AUDIO_INTERFACE_1: case WM8903_AUDIO_INTERFACE_2: case WM8903_AUDIO_INTERFACE_3: case WM8903_DAC_DIGITAL_VOLUME_LEFT: case WM8903_DAC_DIGITAL_VOLUME_RIGHT: case WM8903_DAC_DIGITAL_0: case WM8903_DAC_DIGITAL_1: case WM8903_ADC_DIGITAL_VOLUME_LEFT: case WM8903_ADC_DIGITAL_VOLUME_RIGHT: case WM8903_ADC_DIGITAL_0: case WM8903_DIGITAL_MICROPHONE_0: case WM8903_DRC_0: case WM8903_DRC_1: case WM8903_DRC_2: case WM8903_DRC_3: case WM8903_ANALOGUE_LEFT_INPUT_0: case WM8903_ANALOGUE_RIGHT_INPUT_0: case WM8903_ANALOGUE_LEFT_INPUT_1: case WM8903_ANALOGUE_RIGHT_INPUT_1: case WM8903_ANALOGUE_LEFT_MIX_0: case WM8903_ANALOGUE_RIGHT_MIX_0: case WM8903_ANALOGUE_SPK_MIX_LEFT_0: case WM8903_ANALOGUE_SPK_MIX_LEFT_1: case WM8903_ANALOGUE_SPK_MIX_RIGHT_0: case WM8903_ANALOGUE_SPK_MIX_RIGHT_1: case WM8903_ANALOGUE_OUT1_LEFT: case WM8903_ANALOGUE_OUT1_RIGHT: case WM8903_ANALOGUE_OUT2_LEFT: case WM8903_ANALOGUE_OUT2_RIGHT: case WM8903_ANALOGUE_OUT3_LEFT: case WM8903_ANALOGUE_OUT3_RIGHT: case WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0: case WM8903_DC_SERVO_0: case WM8903_DC_SERVO_2: case WM8903_DC_SERVO_READBACK_1: case WM8903_DC_SERVO_READBACK_2: case WM8903_DC_SERVO_READBACK_3: case WM8903_DC_SERVO_READBACK_4: case WM8903_ANALOGUE_HP_0: case WM8903_ANALOGUE_LINEOUT_0: case WM8903_CHARGE_PUMP_0: case WM8903_CLASS_W_0: case WM8903_WRITE_SEQUENCER_0: case WM8903_WRITE_SEQUENCER_1: case WM8903_WRITE_SEQUENCER_2: case WM8903_WRITE_SEQUENCER_3: case WM8903_WRITE_SEQUENCER_4: case WM8903_CONTROL_INTERFACE: case WM8903_GPIO_CONTROL_1: case WM8903_GPIO_CONTROL_2: case WM8903_GPIO_CONTROL_3: case WM8903_GPIO_CONTROL_4: case WM8903_GPIO_CONTROL_5: case WM8903_INTERRUPT_STATUS_1: case WM8903_INTERRUPT_STATUS_1_MASK: case WM8903_INTERRUPT_POLARITY_1: case WM8903_INTERRUPT_CONTROL: case WM8903_CLOCK_RATE_TEST_4: case WM8903_ANALOGUE_OUTPUT_BIAS_0: return true; default: return false; } } static bool wm8903_volatile_register(struct device *dev, unsigned int reg) { switch (reg) { case WM8903_SW_RESET_AND_ID: case WM8903_REVISION_NUMBER: case WM8903_INTERRUPT_STATUS_1: case WM8903_WRITE_SEQUENCER_4: case WM8903_DC_SERVO_READBACK_1: case WM8903_DC_SERVO_READBACK_2: case WM8903_DC_SERVO_READBACK_3: case WM8903_DC_SERVO_READBACK_4: return 1; default: return 0; } } static int wm8903_cp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { WARN_ON(event != SND_SOC_DAPM_POST_PMU); mdelay(4); return 0; } static int wm8903_dcs_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); switch (event) { case SND_SOC_DAPM_POST_PMU: wm8903->dcs_pending |= 1 << w->shift; break; case SND_SOC_DAPM_PRE_PMD: snd_soc_update_bits(codec, WM8903_DC_SERVO_0, 1 << w->shift, 0); break; } return 0; } #define WM8903_DCS_MODE_WRITE_STOP 0 #define WM8903_DCS_MODE_START_STOP 2 static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm, enum snd_soc_dapm_type event, int subseq) { struct snd_soc_codec *codec = snd_soc_dapm_to_codec(dapm); struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int dcs_mode = WM8903_DCS_MODE_WRITE_STOP; int i, val; /* Complete any pending DC servo starts */ if (wm8903->dcs_pending) { dev_dbg(codec->dev, "Starting DC servo for %x\n", wm8903->dcs_pending); /* If we've no cached values then we need to do startup */ for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { if (!(wm8903->dcs_pending & (1 << i))) continue; if (wm8903->dcs_cache[i]) { dev_dbg(codec->dev, "Restore DC servo %d value %x\n", 3 - i, wm8903->dcs_cache[i]); snd_soc_write(codec, WM8903_DC_SERVO_4 + i, wm8903->dcs_cache[i] & 0xff); } else { dev_dbg(codec->dev, "Calibrate DC servo %d\n", 3 - i); dcs_mode = WM8903_DCS_MODE_START_STOP; } } /* Don't trust the cache for analogue */ if (wm8903->class_w_users) dcs_mode = WM8903_DCS_MODE_START_STOP; snd_soc_update_bits(codec, WM8903_DC_SERVO_2, WM8903_DCS_MODE_MASK, dcs_mode); snd_soc_update_bits(codec, WM8903_DC_SERVO_0, WM8903_DCS_ENA_MASK, wm8903->dcs_pending); switch (dcs_mode) { case WM8903_DCS_MODE_WRITE_STOP: break; case WM8903_DCS_MODE_START_STOP: msleep(270); /* Cache the measured offsets for digital */ if (wm8903->class_w_users) break; for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { if (!(wm8903->dcs_pending & (1 << i))) continue; val = snd_soc_read(codec, WM8903_DC_SERVO_READBACK_1 + i); dev_dbg(codec->dev, "DC servo %d: %x\n", 3 - i, val); wm8903->dcs_cache[i] = val; } break; default: pr_warn("DCS mode %d delay not set\n", dcs_mode); break; } wm8903->dcs_pending = 0; } } /* * When used with DAC outputs only the WM8903 charge pump supports * operation in class W mode, providing very low power consumption * when used with digital sources. Enable and disable this mode * automatically depending on the mixer configuration. * * All the relevant controls are simple switches. */ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_soc_dapm_kcontrol_codec(kcontrol); struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); u16 reg; int ret; reg = snd_soc_read(codec, WM8903_CLASS_W_0); /* Turn it off if we're about to enable bypass */ if (ucontrol->value.integer.value[0]) { if (wm8903->class_w_users == 0) { dev_dbg(codec->dev, "Disabling Class W\n"); snd_soc_write(codec, WM8903_CLASS_W_0, reg & ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V)); } wm8903->class_w_users++; } /* Implement the change */ ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol); /* If we've just disabled the last bypass path turn Class W on */ if (!ucontrol->value.integer.value[0]) { if (wm8903->class_w_users == 1) { dev_dbg(codec->dev, "Enabling Class W\n"); snd_soc_write(codec, WM8903_CLASS_W_0, reg | WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); } wm8903->class_w_users--; } dev_dbg(codec->dev, "Bypass use count now %d\n", wm8903->class_w_users); return ret; } #define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \ SOC_SINGLE_EXT(xname, reg, shift, max, invert, \ snd_soc_dapm_get_volsw, wm8903_class_w_put) static int wm8903_deemph[] = { 0, 32000, 44100, 48000 }; static int wm8903_set_deemph(struct snd_soc_codec *codec) { struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int val, i, best; /* If we're using deemphasis select the nearest available sample * rate. */ if (wm8903->deemph) { best = 1; for (i = 2; i < ARRAY_SIZE(wm8903_deemph); i++) { if (abs(wm8903_deemph[i] - wm8903->fs) < abs(wm8903_deemph[best] - wm8903->fs)) best = i; } val = best << WM8903_DEEMPH_SHIFT; } else { best = 0; val = 0; } dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n", best, wm8903_deemph[best]); return snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1, WM8903_DEEMPH_MASK, val); } static int wm8903_get_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); ucontrol->value.integer.value[0] = wm8903->deemph; return 0; } static int wm8903_put_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int deemph = ucontrol->value.integer.value[0]; int ret = 0; if (deemph > 1) return -EINVAL; mutex_lock(&wm8903->lock); if (wm8903->deemph != deemph) { wm8903->deemph = deemph; wm8903_set_deemph(codec); ret = 1; } mutex_unlock(&wm8903->lock); return ret; } /* ALSA can only do steps of .01dB */ static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0); static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0); static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0); static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0); static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0); static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0); static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0); static const char *hpf_mode_text[] = { "Hi-fi", "Voice 1", "Voice 2", "Voice 3" }; static SOC_ENUM_SINGLE_DECL(hpf_mode, WM8903_ADC_DIGITAL_0, 5, hpf_mode_text); static const char *osr_text[] = { "Low power", "High performance" }; static SOC_ENUM_SINGLE_DECL(adc_osr, WM8903_ANALOGUE_ADC_0, 0, osr_text); static SOC_ENUM_SINGLE_DECL(dac_osr, WM8903_DAC_DIGITAL_1, 0, osr_text); static const char *drc_slope_text[] = { "1", "1/2", "1/4", "1/8", "1/16", "0" }; static SOC_ENUM_SINGLE_DECL(drc_slope_r0, WM8903_DRC_2, 3, drc_slope_text); static SOC_ENUM_SINGLE_DECL(drc_slope_r1, WM8903_DRC_2, 0, drc_slope_text); static const char *drc_attack_text[] = { "instantaneous", "363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms", "46.4ms", "92.8ms", "185.6ms" }; static SOC_ENUM_SINGLE_DECL(drc_attack, WM8903_DRC_1, 12, drc_attack_text); static const char *drc_decay_text[] = { "186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s", "23.87s", "47.56s" }; static SOC_ENUM_SINGLE_DECL(drc_decay, WM8903_DRC_1, 8, drc_decay_text); static const char *drc_ff_delay_text[] = { "5 samples", "9 samples" }; static SOC_ENUM_SINGLE_DECL(drc_ff_delay, WM8903_DRC_0, 5, drc_ff_delay_text); static const char *drc_qr_decay_text[] = { "0.725ms", "1.45ms", "5.8ms" }; static SOC_ENUM_SINGLE_DECL(drc_qr_decay, WM8903_DRC_1, 4, drc_qr_decay_text); static const char *drc_smoothing_text[] = { "Low", "Medium", "High" }; static SOC_ENUM_SINGLE_DECL(drc_smoothing, WM8903_DRC_0, 11, drc_smoothing_text); static const char *soft_mute_text[] = { "Fast (fs/2)", "Slow (fs/32)" }; static SOC_ENUM_SINGLE_DECL(soft_mute, WM8903_DAC_DIGITAL_1, 10, soft_mute_text); static const char *mute_mode_text[] = { "Hard", "Soft" }; static SOC_ENUM_SINGLE_DECL(mute_mode, WM8903_DAC_DIGITAL_1, 9, mute_mode_text); static const char *companding_text[] = { "ulaw", "alaw" }; static SOC_ENUM_SINGLE_DECL(dac_companding, WM8903_AUDIO_INTERFACE_0, 0, companding_text); static SOC_ENUM_SINGLE_DECL(adc_companding, WM8903_AUDIO_INTERFACE_0, 2, companding_text); static const char *input_mode_text[] = { "Single-Ended", "Differential Line", "Differential Mic" }; static SOC_ENUM_SINGLE_DECL(linput_mode_enum, WM8903_ANALOGUE_LEFT_INPUT_1, 0, input_mode_text); static SOC_ENUM_SINGLE_DECL(rinput_mode_enum, WM8903_ANALOGUE_RIGHT_INPUT_1, 0, input_mode_text); static const char *linput_mux_text[] = { "IN1L", "IN2L", "IN3L" }; static SOC_ENUM_SINGLE_DECL(linput_enum, WM8903_ANALOGUE_LEFT_INPUT_1, 2, linput_mux_text); static SOC_ENUM_SINGLE_DECL(linput_inv_enum, WM8903_ANALOGUE_LEFT_INPUT_1, 4, linput_mux_text); static const char *rinput_mux_text[] = { "IN1R", "IN2R", "IN3R" }; static SOC_ENUM_SINGLE_DECL(rinput_enum, WM8903_ANALOGUE_RIGHT_INPUT_1, 2, rinput_mux_text); static SOC_ENUM_SINGLE_DECL(rinput_inv_enum, WM8903_ANALOGUE_RIGHT_INPUT_1, 4, rinput_mux_text); static const char *sidetone_text[] = { "None", "Left", "Right" }; static SOC_ENUM_SINGLE_DECL(lsidetone_enum, WM8903_DAC_DIGITAL_0, 2, sidetone_text); static SOC_ENUM_SINGLE_DECL(rsidetone_enum, WM8903_DAC_DIGITAL_0, 0, sidetone_text); static const char *adcinput_text[] = { "ADC", "DMIC" }; static SOC_ENUM_SINGLE_DECL(adcinput_enum, WM8903_CLOCK_RATE_TEST_4, 9, adcinput_text); static const char *aif_text[] = { "Left", "Right" }; static SOC_ENUM_SINGLE_DECL(lcapture_enum, WM8903_AUDIO_INTERFACE_0, 7, aif_text); static SOC_ENUM_SINGLE_DECL(rcapture_enum, WM8903_AUDIO_INTERFACE_0, 6, aif_text); static SOC_ENUM_SINGLE_DECL(lplay_enum, WM8903_AUDIO_INTERFACE_0, 5, aif_text); static SOC_ENUM_SINGLE_DECL(rplay_enum, WM8903_AUDIO_INTERFACE_0, 4, aif_text); static const struct snd_kcontrol_new wm8903_snd_controls[] = { /* Input PGAs - No TLV since the scale depends on PGA mode */ SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0, 7, 1, 1), SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0, 0, 31, 0), SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1, 6, 1, 0), SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0, 7, 1, 1), SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0), SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1, 6, 1, 0), /* ADCs */ SOC_ENUM("ADC OSR", adc_osr), SOC_SINGLE("HPF Switch", WM8903_ADC_DIGITAL_0, 4, 1, 0), SOC_ENUM("HPF Mode", hpf_mode), SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0), SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0), SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1), SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1, drc_tlv_thresh), SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp), SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min), SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max), SOC_ENUM("DRC Attack Rate", drc_attack), SOC_ENUM("DRC Decay Rate", drc_decay), SOC_ENUM("DRC FF Delay", drc_ff_delay), SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0), SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0), SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max), SOC_ENUM("DRC QR Decay Rate", drc_qr_decay), SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0), SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0), SOC_ENUM("DRC Smoothing Threshold", drc_smoothing), SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup), SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), SOC_ENUM("ADC Companding Mode", adc_companding), SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0), SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8, 12, 0, digital_sidetone_tlv), /* DAC */ SOC_ENUM("DAC OSR", dac_osr), SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT, WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), SOC_ENUM("DAC Soft Mute Rate", soft_mute), SOC_ENUM("DAC Mute Mode", mute_mode), SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0), SOC_ENUM("DAC Companding Mode", dac_companding), SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0), SOC_SINGLE_TLV("DAC Boost Volume", WM8903_AUDIO_INTERFACE_0, 9, 3, 0, dac_boost_tlv), SOC_SINGLE_BOOL_EXT("Playback Deemphasis Switch", 0, wm8903_get_deemph, wm8903_put_deemph), /* Headphones */ SOC_DOUBLE_R("Headphone Switch", WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, 8, 1, 1), SOC_DOUBLE_R("Headphone ZC Switch", WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, 6, 1, 0), SOC_DOUBLE_R_TLV("Headphone Volume", WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, 0, 63, 0, out_tlv), /* Line out */ SOC_DOUBLE_R("Line Out Switch", WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, 8, 1, 1), SOC_DOUBLE_R("Line Out ZC Switch", WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, 6, 1, 0), SOC_DOUBLE_R_TLV("Line Out Volume", WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, 0, 63, 0, out_tlv), /* Speaker */ SOC_DOUBLE_R("Speaker Switch", WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1), SOC_DOUBLE_R("Speaker ZC Switch", WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0), SOC_DOUBLE_R_TLV("Speaker Volume", WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 0, 63, 0, out_tlv), }; static const struct snd_kcontrol_new linput_mode_mux = SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum); static const struct snd_kcontrol_new rinput_mode_mux = SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum); static const struct snd_kcontrol_new linput_mux = SOC_DAPM_ENUM("Left Input Mux", linput_enum); static const struct snd_kcontrol_new linput_inv_mux = SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum); static const struct snd_kcontrol_new rinput_mux = SOC_DAPM_ENUM("Right Input Mux", rinput_enum); static const struct snd_kcontrol_new rinput_inv_mux = SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum); static const struct snd_kcontrol_new lsidetone_mux = SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum); static const struct snd_kcontrol_new rsidetone_mux = SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum); static const struct snd_kcontrol_new adcinput_mux = SOC_DAPM_ENUM("ADC Input", adcinput_enum); static const struct snd_kcontrol_new lcapture_mux = SOC_DAPM_ENUM("Left Capture Mux", lcapture_enum); static const struct snd_kcontrol_new rcapture_mux = SOC_DAPM_ENUM("Right Capture Mux", rcapture_enum); static const struct snd_kcontrol_new lplay_mux = SOC_DAPM_ENUM("Left Playback Mux", lplay_enum); static const struct snd_kcontrol_new rplay_mux = SOC_DAPM_ENUM("Right Playback Mux", rplay_enum); static const struct snd_kcontrol_new left_output_mixer[] = { SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0), SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0), SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0), SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0), }; static const struct snd_kcontrol_new right_output_mixer[] = { SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0), SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0), SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0), SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0), }; static const struct snd_kcontrol_new left_speaker_mixer[] = { SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0), SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0), SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0), SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 0, 1, 0), }; static const struct snd_kcontrol_new right_speaker_mixer[] = { SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0), SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0), SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 1, 1, 0), SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 0, 1, 0), }; static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = { SND_SOC_DAPM_INPUT("IN1L"), SND_SOC_DAPM_INPUT("IN1R"), SND_SOC_DAPM_INPUT("IN2L"), SND_SOC_DAPM_INPUT("IN2R"), SND_SOC_DAPM_INPUT("IN3L"), SND_SOC_DAPM_INPUT("IN3R"), SND_SOC_DAPM_INPUT("DMICDAT"), SND_SOC_DAPM_OUTPUT("HPOUTL"), SND_SOC_DAPM_OUTPUT("HPOUTR"), SND_SOC_DAPM_OUTPUT("LINEOUTL"), SND_SOC_DAPM_OUTPUT("LINEOUTR"), SND_SOC_DAPM_OUTPUT("LOP"), SND_SOC_DAPM_OUTPUT("LON"), SND_SOC_DAPM_OUTPUT("ROP"), SND_SOC_DAPM_OUTPUT("RON"), SND_SOC_DAPM_SUPPLY("MICBIAS", WM8903_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0), SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux), SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0, &linput_inv_mux), SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux), SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux), SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0, &rinput_inv_mux), SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux), SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0), SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), SND_SOC_DAPM_ADC("ADCL", NULL, WM8903_POWER_MANAGEMENT_6, 1, 0), SND_SOC_DAPM_ADC("ADCR", NULL, WM8903_POWER_MANAGEMENT_6, 0, 0), SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lcapture_mux), SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rcapture_mux), SND_SOC_DAPM_AIF_OUT("AIFTXL", "Left HiFi Capture", 0, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_AIF_OUT("AIFTXR", "Right HiFi Capture", 0, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux), SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux), SND_SOC_DAPM_AIF_IN("AIFRXL", "Left Playback", 0, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_AIF_IN("AIFRXR", "Right Playback", 0, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_MUX("Left Playback Mux", SND_SOC_NOPM, 0, 0, &lplay_mux), SND_SOC_DAPM_MUX("Right Playback Mux", SND_SOC_NOPM, 0, 0, &rplay_mux), SND_SOC_DAPM_DAC("DACL", NULL, WM8903_POWER_MANAGEMENT_6, 3, 0), SND_SOC_DAPM_DAC("DACR", NULL, WM8903_POWER_MANAGEMENT_6, 2, 0), SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0, left_output_mixer, ARRAY_SIZE(left_output_mixer)), SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0, right_output_mixer, ARRAY_SIZE(right_output_mixer)), SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0, left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)), SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2, 1, 0, NULL, 0), SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2, 0, 0, NULL, 0), SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0, NULL, 0), SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0, NULL, 0), SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0), SND_SOC_DAPM_PGA_S("HPL_DCS", 3, SND_SOC_NOPM, 3, 0, wm8903_dcs_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_S("HPR_DCS", 3, SND_SOC_NOPM, 2, 0, wm8903_dcs_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, SND_SOC_NOPM, 1, 0, wm8903_dcs_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, SND_SOC_NOPM, 0, 0, wm8903_dcs_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, NULL, 0), SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0, wm8903_cp_event, SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0), }; static const struct snd_soc_dapm_route wm8903_intercon[] = { { "CLK_DSP", NULL, "CLK_SYS" }, { "MICBIAS", NULL, "CLK_SYS" }, { "HPL_DCS", NULL, "CLK_SYS" }, { "HPR_DCS", NULL, "CLK_SYS" }, { "LINEOUTL_DCS", NULL, "CLK_SYS" }, { "LINEOUTR_DCS", NULL, "CLK_SYS" }, { "Left Input Mux", "IN1L", "IN1L" }, { "Left Input Mux", "IN2L", "IN2L" }, { "Left Input Mux", "IN3L", "IN3L" }, { "Left Input Inverting Mux", "IN1L", "IN1L" }, { "Left Input Inverting Mux", "IN2L", "IN2L" }, { "Left Input Inverting Mux", "IN3L", "IN3L" }, { "Right Input Mux", "IN1R", "IN1R" }, { "Right Input Mux", "IN2R", "IN2R" }, { "Right Input Mux", "IN3R", "IN3R" }, { "Right Input Inverting Mux", "IN1R", "IN1R" }, { "Right Input Inverting Mux", "IN2R", "IN2R" }, { "Right Input Inverting Mux", "IN3R", "IN3R" }, { "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" }, { "Left Input Mode Mux", "Differential Line", "Left Input Mux" }, { "Left Input Mode Mux", "Differential Line", "Left Input Inverting Mux" }, { "Left Input Mode Mux", "Differential Mic", "Left Input Mux" }, { "Left Input Mode Mux", "Differential Mic", "Left Input Inverting Mux" }, { "Right Input Mode Mux", "Single-Ended", "Right Input Inverting Mux" }, { "Right Input Mode Mux", "Differential Line", "Right Input Mux" }, { "Right Input Mode Mux", "Differential Line", "Right Input Inverting Mux" }, { "Right Input Mode Mux", "Differential Mic", "Right Input Mux" }, { "Right Input Mode Mux", "Differential Mic", "Right Input Inverting Mux" }, { "Left Input PGA", NULL, "Left Input Mode Mux" }, { "Right Input PGA", NULL, "Right Input Mode Mux" }, { "Left ADC Input", "ADC", "Left Input PGA" }, { "Left ADC Input", "DMIC", "DMICDAT" }, { "Right ADC Input", "ADC", "Right Input PGA" }, { "Right ADC Input", "DMIC", "DMICDAT" }, { "Left Capture Mux", "Left", "ADCL" }, { "Left Capture Mux", "Right", "ADCR" }, { "Right Capture Mux", "Left", "ADCL" }, { "Right Capture Mux", "Right", "ADCR" }, { "AIFTXL", NULL, "Left Capture Mux" }, { "AIFTXR", NULL, "Right Capture Mux" }, { "ADCL", NULL, "Left ADC Input" }, { "ADCL", NULL, "CLK_DSP" }, { "ADCR", NULL, "Right ADC Input" }, { "ADCR", NULL, "CLK_DSP" }, { "Left Playback Mux", "Left", "AIFRXL" }, { "Left Playback Mux", "Right", "AIFRXR" }, { "Right Playback Mux", "Left", "AIFRXL" }, { "Right Playback Mux", "Right", "AIFRXR" }, { "DACL Sidetone", "Left", "ADCL" }, { "DACL Sidetone", "Right", "ADCR" }, { "DACR Sidetone", "Left", "ADCL" }, { "DACR Sidetone", "Right", "ADCR" }, { "DACL", NULL, "Left Playback Mux" }, { "DACL", NULL, "DACL Sidetone" }, { "DACL", NULL, "CLK_DSP" }, { "DACR", NULL, "Right Playback Mux" }, { "DACR", NULL, "DACR Sidetone" }, { "DACR", NULL, "CLK_DSP" }, { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" }, { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" }, { "Left Output Mixer", "DACL Switch", "DACL" }, { "Left Output Mixer", "DACR Switch", "DACR" }, { "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" }, { "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" }, { "Right Output Mixer", "DACL Switch", "DACL" }, { "Right Output Mixer", "DACR Switch", "DACR" }, { "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, { "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, { "Left Speaker Mixer", "DACL Switch", "DACL" }, { "Left Speaker Mixer", "DACR Switch", "DACR" }, { "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, { "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, { "Right Speaker Mixer", "DACL Switch", "DACL" }, { "Right Speaker Mixer", "DACR Switch", "DACR" }, { "Left Line Output PGA", NULL, "Left Output Mixer" }, { "Right Line Output PGA", NULL, "Right Output Mixer" }, { "Left Headphone Output PGA", NULL, "Left Output Mixer" }, { "Right Headphone Output PGA", NULL, "Right Output Mixer" }, { "Left Speaker PGA", NULL, "Left Speaker Mixer" }, { "Right Speaker PGA", NULL, "Right Speaker Mixer" }, { "HPL_ENA", NULL, "Left Headphone Output PGA" }, { "HPR_ENA", NULL, "Right Headphone Output PGA" }, { "HPL_ENA_DLY", NULL, "HPL_ENA" }, { "HPR_ENA_DLY", NULL, "HPR_ENA" }, { "LINEOUTL_ENA", NULL, "Left Line Output PGA" }, { "LINEOUTR_ENA", NULL, "Right Line Output PGA" }, { "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" }, { "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" }, { "HPL_DCS", NULL, "DCS Master" }, { "HPR_DCS", NULL, "DCS Master" }, { "LINEOUTL_DCS", NULL, "DCS Master" }, { "LINEOUTR_DCS", NULL, "DCS Master" }, { "HPL_DCS", NULL, "HPL_ENA_DLY" }, { "HPR_DCS", NULL, "HPR_ENA_DLY" }, { "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" }, { "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" }, { "HPL_ENA_OUTP", NULL, "HPL_DCS" }, { "HPR_ENA_OUTP", NULL, "HPR_DCS" }, { "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" }, { "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" }, { "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" }, { "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" }, { "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" }, { "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" }, { "HPOUTL", NULL, "HPL_RMV_SHORT" }, { "HPOUTR", NULL, "HPR_RMV_SHORT" }, { "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" }, { "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" }, { "LOP", NULL, "Left Speaker PGA" }, { "LON", NULL, "Left Speaker PGA" }, { "ROP", NULL, "Right Speaker PGA" }, { "RON", NULL, "Right Speaker PGA" }, { "Charge Pump", NULL, "CLK_DSP" }, { "Left Headphone Output PGA", NULL, "Charge Pump" }, { "Right Headphone Output PGA", NULL, "Charge Pump" }, { "Left Line Output PGA", NULL, "Charge Pump" }, { "Right Line Output PGA", NULL, "Charge Pump" }, }; static int wm8903_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_RES_MASK, WM8903_VMID_RES_50K); break; case SND_SOC_BIAS_STANDBY: if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, WM8903_POBCTRL | WM8903_ISEL_MASK | WM8903_STARTUP_BIAS_ENA | WM8903_BIAS_ENA, WM8903_POBCTRL | (2 << WM8903_ISEL_SHIFT) | WM8903_STARTUP_BIAS_ENA); snd_soc_update_bits(codec, WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0, WM8903_SPK_DISCHARGE, WM8903_SPK_DISCHARGE); msleep(33); snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5, WM8903_SPKL_ENA | WM8903_SPKR_ENA, WM8903_SPKL_ENA | WM8903_SPKR_ENA); snd_soc_update_bits(codec, WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0, WM8903_SPK_DISCHARGE, 0); snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA | WM8903_VMID_IO_ENA | WM8903_VMID_SOFT_MASK | WM8903_VMID_RES_MASK | WM8903_VMID_BUF_ENA, WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA | WM8903_VMID_IO_ENA | (2 << WM8903_VMID_SOFT_SHIFT) | WM8903_VMID_RES_250K | WM8903_VMID_BUF_ENA); msleep(129); snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5, WM8903_SPKL_ENA | WM8903_SPKR_ENA, 0); snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_SOFT_MASK, 0); snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_RES_MASK, WM8903_VMID_RES_50K); snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, WM8903_BIAS_ENA | WM8903_POBCTRL, WM8903_BIAS_ENA); /* By default no bypass paths are enabled so * enable Class W support. */ dev_dbg(codec->dev, "Enabling Class W\n"); snd_soc_update_bits(codec, WM8903_CLASS_W_0, WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V, WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); } snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_RES_MASK, WM8903_VMID_RES_250K); break; case SND_SOC_BIAS_OFF: snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, WM8903_BIAS_ENA, 0); snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_SOFT_MASK, 2 << WM8903_VMID_SOFT_SHIFT); snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_BUF_ENA, 0); msleep(290); snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA | WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK | WM8903_VMID_SOFT_MASK | WM8903_VMID_BUF_ENA, 0); snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, WM8903_STARTUP_BIAS_ENA, 0); break; } return 0; } static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) { struct snd_soc_codec *codec = codec_dai->codec; struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); wm8903->sysclk = freq; return 0; } static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_codec *codec = codec_dai->codec; u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK | WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV); switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: break; case SND_SOC_DAIFMT_CBS_CFM: aif1 |= WM8903_LRCLK_DIR; break; case SND_SOC_DAIFMT_CBM_CFM: aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR; break; case SND_SOC_DAIFMT_CBM_CFS: aif1 |= WM8903_BCLK_DIR; break; default: return -EINVAL; } switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_A: aif1 |= 0x3; break; case SND_SOC_DAIFMT_DSP_B: aif1 |= 0x3 | WM8903_AIF_LRCLK_INV; break; case SND_SOC_DAIFMT_I2S: aif1 |= 0x2; break; case SND_SOC_DAIFMT_RIGHT_J: aif1 |= 0x1; break; case SND_SOC_DAIFMT_LEFT_J: break; default: return -EINVAL; } /* Clock inversion */ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_A: case SND_SOC_DAIFMT_DSP_B: /* frame inversion not valid for DSP modes */ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: break; case SND_SOC_DAIFMT_IB_NF: aif1 |= WM8903_AIF_BCLK_INV; break; default: return -EINVAL; } break; case SND_SOC_DAIFMT_I2S: case SND_SOC_DAIFMT_RIGHT_J: case SND_SOC_DAIFMT_LEFT_J: switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: break; case SND_SOC_DAIFMT_IB_IF: aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV; break; case SND_SOC_DAIFMT_IB_NF: aif1 |= WM8903_AIF_BCLK_INV; break; case SND_SOC_DAIFMT_NB_IF: aif1 |= WM8903_AIF_LRCLK_INV; break; default: return -EINVAL; } break; default: return -EINVAL; } snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); return 0; } static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute) { struct snd_soc_codec *codec = codec_dai->codec; u16 reg; reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); if (mute) reg |= WM8903_DAC_MUTE; else reg &= ~WM8903_DAC_MUTE; snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg); return 0; } /* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended * for optimal performance so we list the lower rates first and match * on the last match we find. */ static struct { int div; int rate; int mode; int mclk_div; } clk_sys_ratios[] = { { 64, 0x0, 0x0, 1 }, { 68, 0x0, 0x1, 1 }, { 125, 0x0, 0x2, 1 }, { 128, 0x1, 0x0, 1 }, { 136, 0x1, 0x1, 1 }, { 192, 0x2, 0x0, 1 }, { 204, 0x2, 0x1, 1 }, { 64, 0x0, 0x0, 2 }, { 68, 0x0, 0x1, 2 }, { 125, 0x0, 0x2, 2 }, { 128, 0x1, 0x0, 2 }, { 136, 0x1, 0x1, 2 }, { 192, 0x2, 0x0, 2 }, { 204, 0x2, 0x1, 2 }, { 250, 0x2, 0x2, 1 }, { 256, 0x3, 0x0, 1 }, { 272, 0x3, 0x1, 1 }, { 384, 0x4, 0x0, 1 }, { 408, 0x4, 0x1, 1 }, { 375, 0x4, 0x2, 1 }, { 512, 0x5, 0x0, 1 }, { 544, 0x5, 0x1, 1 }, { 500, 0x5, 0x2, 1 }, { 768, 0x6, 0x0, 1 }, { 816, 0x6, 0x1, 1 }, { 750, 0x6, 0x2, 1 }, { 1024, 0x7, 0x0, 1 }, { 1088, 0x7, 0x1, 1 }, { 1000, 0x7, 0x2, 1 }, { 1408, 0x8, 0x0, 1 }, { 1496, 0x8, 0x1, 1 }, { 1536, 0x9, 0x0, 1 }, { 1632, 0x9, 0x1, 1 }, { 1500, 0x9, 0x2, 1 }, { 250, 0x2, 0x2, 2 }, { 256, 0x3, 0x0, 2 }, { 272, 0x3, 0x1, 2 }, { 384, 0x4, 0x0, 2 }, { 408, 0x4, 0x1, 2 }, { 375, 0x4, 0x2, 2 }, { 512, 0x5, 0x0, 2 }, { 544, 0x5, 0x1, 2 }, { 500, 0x5, 0x2, 2 }, { 768, 0x6, 0x0, 2 }, { 816, 0x6, 0x1, 2 }, { 750, 0x6, 0x2, 2 }, { 1024, 0x7, 0x0, 2 }, { 1088, 0x7, 0x1, 2 }, { 1000, 0x7, 0x2, 2 }, { 1408, 0x8, 0x0, 2 }, { 1496, 0x8, 0x1, 2 }, { 1536, 0x9, 0x0, 2 }, { 1632, 0x9, 0x1, 2 }, { 1500, 0x9, 0x2, 2 }, }; /* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */ static struct { int ratio; int div; } bclk_divs[] = { { 10, 0 }, { 20, 2 }, { 30, 3 }, { 40, 4 }, { 50, 5 }, { 60, 7 }, { 80, 8 }, { 100, 9 }, { 120, 11 }, { 160, 12 }, { 200, 13 }, { 220, 14 }, { 240, 15 }, { 300, 17 }, { 320, 18 }, { 440, 19 }, { 480, 20 }, }; /* Sample rates for DSP */ static struct { int rate; int value; } sample_rates[] = { { 8000, 0 }, { 11025, 1 }, { 12000, 2 }, { 16000, 3 }, { 22050, 4 }, { 24000, 5 }, { 32000, 6 }, { 44100, 7 }, { 48000, 8 }, { 88200, 9 }, { 96000, 10 }, { 0, 0 }, }; static int wm8903_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_codec *codec = dai->codec; struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int fs = params_rate(params); int bclk; int bclk_div; int i; int dsp_config; int clk_config; int best_val; int cur_val; int clk_sys; u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2); u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3); u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0); u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1); u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); /* Enable sloping stopband filter for low sample rates */ if (fs <= 24000) dac_digital1 |= WM8903_DAC_SB_FILT; else dac_digital1 &= ~WM8903_DAC_SB_FILT; /* Configure sample rate logic for DSP - choose nearest rate */ dsp_config = 0; best_val = abs(sample_rates[dsp_config].rate - fs); for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { cur_val = abs(sample_rates[i].rate - fs); if (cur_val <= best_val) { dsp_config = i; best_val = cur_val; } } dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate); clock1 &= ~WM8903_SAMPLE_RATE_MASK; clock1 |= sample_rates[dsp_config].value; aif1 &= ~WM8903_AIF_WL_MASK; bclk = 2 * fs; switch (params_width(params)) { case 16: bclk *= 16; break; case 20: bclk *= 20; aif1 |= 0x4; break; case 24: bclk *= 24; aif1 |= 0x8; break; case 32: bclk *= 32; aif1 |= 0xc; break; default: return -EINVAL; } dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n", wm8903->sysclk, fs); /* We may not have an MCLK which allows us to generate exactly * the clock we want, particularly with USB derived inputs, so * approximate. */ clk_config = 0; best_val = abs((wm8903->sysclk / (clk_sys_ratios[0].mclk_div * clk_sys_ratios[0].div)) - fs); for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) { cur_val = abs((wm8903->sysclk / (clk_sys_ratios[i].mclk_div * clk_sys_ratios[i].div)) - fs); if (cur_val <= best_val) { clk_config = i; best_val = cur_val; } } if (clk_sys_ratios[clk_config].mclk_div == 2) { clock0 |= WM8903_MCLKDIV2; clk_sys = wm8903->sysclk / 2; } else { clock0 &= ~WM8903_MCLKDIV2; clk_sys = wm8903->sysclk; } clock1 &= ~(WM8903_CLK_SYS_RATE_MASK | WM8903_CLK_SYS_MODE_MASK); clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT; clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT; dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n", clk_sys_ratios[clk_config].rate, clk_sys_ratios[clk_config].mode, clk_sys_ratios[clk_config].div); dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys); /* We may not get quite the right frequency if using * approximate clocks so look for the closest match that is * higher than the target (we need to ensure that there enough * BCLKs to clock out the samples). */ bclk_div = 0; best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk; i = 1; while (i < ARRAY_SIZE(bclk_divs)) { cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk; if (cur_val < 0) /* BCLK table is sorted */ break; bclk_div = i; best_val = cur_val; i++; } aif2 &= ~WM8903_BCLK_DIV_MASK; aif3 &= ~WM8903_LRCLK_RATE_MASK; dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n", bclk_divs[bclk_div].ratio / 10, bclk, (clk_sys * 10) / bclk_divs[bclk_div].ratio); aif2 |= bclk_divs[bclk_div].div; aif3 |= bclk / fs; wm8903->fs = params_rate(params); wm8903_set_deemph(codec); snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0); snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1); snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2); snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3); snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1); return 0; } /** * wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ * * @codec: WM8903 codec * @jack: jack to report detection events on * @det: value to report for presence detection * @shrt: value to report for short detection * * Enable microphone detection via IRQ on the WM8903. If GPIOs are * being used to bring out signals to the processor then only platform * data configuration is needed for WM8903 and processor GPIOs should * be configured using snd_soc_jack_add_gpios() instead. * * The current threasholds for detection should be configured using * micdet_cfg in the platform data. Using this function will force on * the microphone bias for the device. */ int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, int det, int shrt) { struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT; dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n", det, shrt); /* Store the configuration */ wm8903->mic_jack = jack; wm8903->mic_det = det; wm8903->mic_short = shrt; /* Enable interrupts we've got a report configured for */ if (det) irq_mask &= ~WM8903_MICDET_EINT; if (shrt) irq_mask &= ~WM8903_MICSHRT_EINT; snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK, WM8903_MICDET_EINT | WM8903_MICSHRT_EINT, irq_mask); if (det || shrt) { /* Enable mic detection, this may not have been set through * platform data (eg, if the defaults are OK). */ snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0, WM8903_WSEQ_ENA, WM8903_WSEQ_ENA); snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0, WM8903_MICDET_ENA, WM8903_MICDET_ENA); } else { snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0, WM8903_MICDET_ENA, 0); } return 0; } EXPORT_SYMBOL_GPL(wm8903_mic_detect); static irqreturn_t wm8903_irq(int irq, void *data) { struct wm8903_priv *wm8903 = data; int mic_report, ret; unsigned int int_val, mask, int_pol; ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1_MASK, &mask); if (ret != 0) { dev_err(wm8903->dev, "Failed to read IRQ mask: %d\n", ret); return IRQ_NONE; } ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1, &int_val); if (ret != 0) { dev_err(wm8903->dev, "Failed to read IRQ status: %d\n", ret); return IRQ_NONE; } int_val &= ~mask; if (int_val & WM8903_WSEQ_BUSY_EINT) { dev_warn(wm8903->dev, "Write sequencer done\n"); } /* * The rest is microphone jack detection. We need to manually * invert the polarity of the interrupt after each event - to * simplify the code keep track of the last state we reported * and just invert the relevant bits in both the report and * the polarity register. */ mic_report = wm8903->mic_last_report; ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1, &int_pol); if (ret != 0) { dev_err(wm8903->dev, "Failed to read interrupt polarity: %d\n", ret); return IRQ_HANDLED; } #ifndef CONFIG_SND_SOC_WM8903_MODULE if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT)) trace_snd_soc_jack_irq(dev_name(wm8903->dev)); #endif if (int_val & WM8903_MICSHRT_EINT) { dev_dbg(wm8903->dev, "Microphone short (pol=%x)\n", int_pol); mic_report ^= wm8903->mic_short; int_pol ^= WM8903_MICSHRT_INV; } if (int_val & WM8903_MICDET_EINT) { dev_dbg(wm8903->dev, "Microphone detect (pol=%x)\n", int_pol); mic_report ^= wm8903->mic_det; int_pol ^= WM8903_MICDET_INV; msleep(wm8903->mic_delay); } regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1, WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol); snd_soc_jack_report(wm8903->mic_jack, mic_report, wm8903->mic_short | wm8903->mic_det); wm8903->mic_last_report = mic_report; return IRQ_HANDLED; } #define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\ SNDRV_PCM_RATE_11025 | \ SNDRV_PCM_RATE_16000 | \ SNDRV_PCM_RATE_22050 | \ SNDRV_PCM_RATE_32000 | \ SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | \ SNDRV_PCM_RATE_88200 | \ SNDRV_PCM_RATE_96000) #define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\ SNDRV_PCM_RATE_11025 | \ SNDRV_PCM_RATE_16000 | \ SNDRV_PCM_RATE_22050 | \ SNDRV_PCM_RATE_32000 | \ SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000) #define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE) static const struct snd_soc_dai_ops wm8903_dai_ops = { .hw_params = wm8903_hw_params, .digital_mute = wm8903_digital_mute, .set_fmt = wm8903_set_dai_fmt, .set_sysclk = wm8903_set_dai_sysclk, }; static struct snd_soc_dai_driver wm8903_dai = { .name = "wm8903-hifi", .playback = { .stream_name = "Playback", .channels_min = 2, .channels_max = 2, .rates = WM8903_PLAYBACK_RATES, .formats = WM8903_FORMATS, }, .capture = { .stream_name = "Capture", .channels_min = 2, .channels_max = 2, .rates = WM8903_CAPTURE_RATES, .formats = WM8903_FORMATS, }, .ops = &wm8903_dai_ops, .symmetric_rates = 1, }; static int wm8903_resume(struct snd_soc_codec *codec) { struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); regcache_sync(wm8903->regmap); return 0; } #ifdef CONFIG_GPIOLIB static inline struct wm8903_priv *gpio_to_wm8903(struct gpio_chip *chip) { return container_of(chip, struct wm8903_priv, gpio_chip); } static int wm8903_gpio_request(struct gpio_chip *chip, unsigned offset) { if (offset >= WM8903_NUM_GPIO) return -EINVAL; return 0; } static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset) { struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); unsigned int mask, val; int ret; mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK; val = (WM8903_GPn_FN_GPIO_INPUT << WM8903_GP1_FN_SHIFT) | WM8903_GP1_DIR; ret = regmap_update_bits(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, mask, val); if (ret < 0) return ret; return 0; } static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset) { struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); unsigned int reg; regmap_read(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, ®); return (reg & WM8903_GP1_LVL_MASK) >> WM8903_GP1_LVL_SHIFT; } static int wm8903_gpio_direction_out(struct gpio_chip *chip, unsigned offset, int value) { struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); unsigned int mask, val; int ret; mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK; val = (WM8903_GPn_FN_GPIO_OUTPUT << WM8903_GP1_FN_SHIFT) | (value << WM8903_GP2_LVL_SHIFT); ret = regmap_update_bits(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, mask, val); if (ret < 0) return ret; return 0; } static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); regmap_update_bits(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, WM8903_GP1_LVL_MASK, !!value << WM8903_GP1_LVL_SHIFT); } static struct gpio_chip wm8903_template_chip = { .label = "wm8903", .owner = THIS_MODULE, .request = wm8903_gpio_request, .direction_input = wm8903_gpio_direction_in, .get = wm8903_gpio_get, .direction_output = wm8903_gpio_direction_out, .set = wm8903_gpio_set, .can_sleep = 1, }; static void wm8903_init_gpio(struct wm8903_priv *wm8903) { struct wm8903_platform_data *pdata = wm8903->pdata; int ret; wm8903->gpio_chip = wm8903_template_chip; wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO; wm8903->gpio_chip.dev = wm8903->dev; if (pdata->gpio_base) wm8903->gpio_chip.base = pdata->gpio_base; else wm8903->gpio_chip.base = -1; ret = gpiochip_add(&wm8903->gpio_chip); if (ret != 0) dev_err(wm8903->dev, "Failed to add GPIOs: %d\n", ret); } static void wm8903_free_gpio(struct wm8903_priv *wm8903) { gpiochip_remove(&wm8903->gpio_chip); } #else static void wm8903_init_gpio(struct wm8903_priv *wm8903) { } static void wm8903_free_gpio(struct wm8903_priv *wm8903) { } #endif static struct snd_soc_codec_driver soc_codec_dev_wm8903 = { .resume = wm8903_resume, .set_bias_level = wm8903_set_bias_level, .seq_notifier = wm8903_seq_notifier, .suspend_bias_off = true, .controls = wm8903_snd_controls, .num_controls = ARRAY_SIZE(wm8903_snd_controls), .dapm_widgets = wm8903_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets), .dapm_routes = wm8903_intercon, .num_dapm_routes = ARRAY_SIZE(wm8903_intercon), }; static const struct regmap_config wm8903_regmap = { .reg_bits = 8, .val_bits = 16, .max_register = WM8903_MAX_REGISTER, .volatile_reg = wm8903_volatile_register, .readable_reg = wm8903_readable_register, .cache_type = REGCACHE_RBTREE, .reg_defaults = wm8903_reg_defaults, .num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults), }; static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c, struct wm8903_platform_data *pdata) { struct irq_data *irq_data = irq_get_irq_data(i2c->irq); if (!irq_data) { dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq); return -EINVAL; } switch (irqd_get_trigger_type(irq_data)) { case IRQ_TYPE_NONE: default: /* * We assume the controller imposes no restrictions, * so we are able to select active-high */ /* Fall-through */ case IRQ_TYPE_LEVEL_HIGH: pdata->irq_active_low = false; break; case IRQ_TYPE_LEVEL_LOW: pdata->irq_active_low = true; break; } return 0; } static int wm8903_set_pdata_from_of(struct i2c_client *i2c, struct wm8903_platform_data *pdata) { const struct device_node *np = i2c->dev.of_node; u32 val32; int i; if (of_property_read_u32(np, "micdet-cfg", &val32) >= 0) pdata->micdet_cfg = val32; if (of_property_read_u32(np, "micdet-delay", &val32) >= 0) pdata->micdet_delay = val32; if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_cfg, ARRAY_SIZE(pdata->gpio_cfg)) >= 0) { /* * In device tree: 0 means "write 0", * 0xffffffff means "don't touch". * * In platform data: 0 means "don't touch", * 0x8000 means "write 0". * * Note: WM8903_GPIO_CONFIG_ZERO == 0x8000. * * Convert from DT to pdata representation here, * so no other code needs to change. */ for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) { if (pdata->gpio_cfg[i] == 0) { pdata->gpio_cfg[i] = WM8903_GPIO_CONFIG_ZERO; } else if (pdata->gpio_cfg[i] == 0xffffffff) { pdata->gpio_cfg[i] = 0; } else if (pdata->gpio_cfg[i] > 0x7fff) { dev_err(&i2c->dev, "Invalid gpio-cfg[%d] %x\n", i, pdata->gpio_cfg[i]); return -EINVAL; } } } return 0; } static int wm8903_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev); struct wm8903_priv *wm8903; int trigger; bool mic_gpio = false; unsigned int val, irq_pol; int ret, i; wm8903 = devm_kzalloc(&i2c->dev, sizeof(struct wm8903_priv), GFP_KERNEL); if (wm8903 == NULL) return -ENOMEM; mutex_init(&wm8903->lock); wm8903->dev = &i2c->dev; wm8903->regmap = devm_regmap_init_i2c(i2c, &wm8903_regmap); if (IS_ERR(wm8903->regmap)) { ret = PTR_ERR(wm8903->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); return ret; } i2c_set_clientdata(i2c, wm8903); /* If no platform data was supplied, create storage for defaults */ if (pdata) { wm8903->pdata = pdata; } else { wm8903->pdata = devm_kzalloc(&i2c->dev, sizeof(struct wm8903_platform_data), GFP_KERNEL); if (wm8903->pdata == NULL) { dev_err(&i2c->dev, "Failed to allocate pdata\n"); return -ENOMEM; } if (i2c->irq) { ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata); if (ret != 0) return ret; } if (i2c->dev.of_node) { ret = wm8903_set_pdata_from_of(i2c, wm8903->pdata); if (ret != 0) return ret; } } pdata = wm8903->pdata; ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val); if (ret != 0) { dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); goto err; } if (val != 0x8903) { dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val); ret = -ENODEV; goto err; } ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val); if (ret != 0) { dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret); goto err; } dev_info(&i2c->dev, "WM8903 revision %c\n", (val & WM8903_CHIP_REV_MASK) + 'A'); /* Reset the device */ regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903); wm8903_init_gpio(wm8903); /* Set up GPIO pin state, detect if any are MIC detect outputs */ for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) { if ((!pdata->gpio_cfg[i]) || (pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO)) continue; regmap_write(wm8903->regmap, WM8903_GPIO_CONTROL_1 + i, pdata->gpio_cfg[i] & 0x7fff); val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK) >> WM8903_GP1_FN_SHIFT; switch (val) { case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT: case WM8903_GPn_FN_MICBIAS_SHORT_DETECT: mic_gpio = true; break; default: break; } } /* Set up microphone detection */ regmap_write(wm8903->regmap, WM8903_MIC_BIAS_CONTROL_0, pdata->micdet_cfg); /* Microphone detection needs the WSEQ clock */ if (pdata->micdet_cfg) regmap_update_bits(wm8903->regmap, WM8903_WRITE_SEQUENCER_0, WM8903_WSEQ_ENA, WM8903_WSEQ_ENA); /* If microphone detection is enabled by pdata but * detected via IRQ then interrupts can be lost before * the machine driver has set up microphone detection * IRQs as the IRQs are clear on read. The detection * will be enabled when the machine driver configures. */ WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA)); wm8903->mic_delay = pdata->micdet_delay; if (i2c->irq) { if (pdata->irq_active_low) { trigger = IRQF_TRIGGER_LOW; irq_pol = WM8903_IRQ_POL; } else { trigger = IRQF_TRIGGER_HIGH; irq_pol = 0; } regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_CONTROL, WM8903_IRQ_POL, irq_pol); ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq, trigger | IRQF_ONESHOT, "wm8903", wm8903); if (ret != 0) { dev_err(wm8903->dev, "Failed to request IRQ: %d\n", ret); return ret; } /* Enable write sequencer interrupts */ regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_STATUS_1_MASK, WM8903_IM_WSEQ_BUSY_EINT, 0); } /* Latch volume update bits */ regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_LEFT, WM8903_ADCVU, WM8903_ADCVU); regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_RIGHT, WM8903_ADCVU, WM8903_ADCVU); regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_LEFT, WM8903_DACVU, WM8903_DACVU); regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_RIGHT, WM8903_DACVU, WM8903_DACVU); regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_LEFT, WM8903_HPOUTVU, WM8903_HPOUTVU); regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_RIGHT, WM8903_HPOUTVU, WM8903_HPOUTVU); regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_LEFT, WM8903_LINEOUTVU, WM8903_LINEOUTVU); regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_RIGHT, WM8903_LINEOUTVU, WM8903_LINEOUTVU); regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_LEFT, WM8903_SPKVU, WM8903_SPKVU); regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_RIGHT, WM8903_SPKVU, WM8903_SPKVU); /* Enable DAC soft mute by default */ regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_1, WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE, WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE); ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8903, &wm8903_dai, 1); if (ret != 0) goto err; return 0; err: return ret; } static int wm8903_i2c_remove(struct i2c_client *client) { struct wm8903_priv *wm8903 = i2c_get_clientdata(client); if (client->irq) free_irq(client->irq, wm8903); wm8903_free_gpio(wm8903); snd_soc_unregister_codec(&client->dev); return 0; } static const struct of_device_id wm8903_of_match[] = { { .compatible = "wlf,wm8903", }, {}, }; MODULE_DEVICE_TABLE(of, wm8903_of_match); static const struct i2c_device_id wm8903_i2c_id[] = { { "wm8903", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id); static struct i2c_driver wm8903_i2c_driver = { .driver = { .name = "wm8903", .owner = THIS_MODULE, .of_match_table = wm8903_of_match, }, .probe = wm8903_i2c_probe, .remove = wm8903_i2c_remove, .id_table = wm8903_i2c_id, }; module_i2c_driver(wm8903_i2c_driver); MODULE_DESCRIPTION("ASoC WM8903 driver"); MODULE_AUTHOR("Mark Brown "); MODULE_LICENSE("GPL");