/* * Copyright (c) 2006-2008 Intel Corporation * Copyright (c) 2007 Dave Airlie * * DRM core CRTC related functions * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. * * Authors: * Keith Packard * Eric Anholt * Dave Airlie * Jesse Barnes */ #include #include #include #include #include #include #include #include #include #include #include #include /** * DOC: overview * * The CRTC modeset helper library provides a default set_config implementation * in drm_crtc_helper_set_config(). Plus a few other convenience functions using * the same callbacks which drivers can use to e.g. restore the modeset * configuration on resume with drm_helper_resume_force_mode(). * * Note that this helper library doesn't track the current power state of CRTCs * and encoders. It can callbacks like ->dpms() even though the hardware is * already in the desired state. This deficiency has been fixed in the atomic * helpers. * * The driver callbacks are mostly compatible with the atomic modeset helpers, * except for the handling of the primary plane: Atomic helpers require that the * primary plane is implemented as a real standalone plane and not directly tied * to the CRTC state. For easier transition this library provides functions to * implement the old semantics required by the CRTC helpers using the new plane * and atomic helper callbacks. * * Drivers are strongly urged to convert to the atomic helpers (by way of first * converting to the plane helpers). New drivers must not use these functions * but need to implement the atomic interface instead, potentially using the * atomic helpers for that. * * The these legacy modeset helpers use the same function table structures as * all other modesetting helpers. See the documentation for struct * &drm_crtc_helper_funcs, struct &drm_encoder_helper_funcs and struct * &drm_connector_helper_funcs. */ MODULE_AUTHOR("David Airlie, Jesse Barnes"); MODULE_DESCRIPTION("DRM KMS helper"); MODULE_LICENSE("GPL and additional rights"); /** * drm_helper_move_panel_connectors_to_head() - move panels to the front in the * connector list * @dev: drm device to operate on * * Some userspace presumes that the first connected connector is the main * display, where it's supposed to display e.g. the login screen. For * laptops, this should be the main panel. Use this function to sort all * (eDP/LVDS) panels to the front of the connector list, instead of * painstakingly trying to initialize them in the right order. */ void drm_helper_move_panel_connectors_to_head(struct drm_device *dev) { struct drm_connector *connector, *tmp; struct list_head panel_list; INIT_LIST_HEAD(&panel_list); list_for_each_entry_safe(connector, tmp, &dev->mode_config.connector_list, head) { if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS || connector->connector_type == DRM_MODE_CONNECTOR_eDP) list_move_tail(&connector->head, &panel_list); } list_splice(&panel_list, &dev->mode_config.connector_list); } EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head); /** * drm_helper_encoder_in_use - check if a given encoder is in use * @encoder: encoder to check * * Checks whether @encoder is with the current mode setting output configuration * in use by any connector. This doesn't mean that it is actually enabled since * the DPMS state is tracked separately. * * Returns: * True if @encoder is used, false otherwise. */ bool drm_helper_encoder_in_use(struct drm_encoder *encoder) { struct drm_connector *connector; struct drm_device *dev = encoder->dev; /* * We can expect this mutex to be locked if we are not panicking. * Locking is currently fubar in the panic handler. */ if (!oops_in_progress) { WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); } drm_for_each_connector(connector, dev) if (connector->encoder == encoder) return true; return false; } EXPORT_SYMBOL(drm_helper_encoder_in_use); /** * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config * @crtc: CRTC to check * * Checks whether @crtc is with the current mode setting output configuration * in use by any connector. This doesn't mean that it is actually enabled since * the DPMS state is tracked separately. * * Returns: * True if @crtc is used, false otherwise. */ bool drm_helper_crtc_in_use(struct drm_crtc *crtc) { struct drm_encoder *encoder; struct drm_device *dev = crtc->dev; /* * We can expect this mutex to be locked if we are not panicking. * Locking is currently fubar in the panic handler. */ if (!oops_in_progress) WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); drm_for_each_encoder(encoder, dev) if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder)) return true; return false; } EXPORT_SYMBOL(drm_helper_crtc_in_use); static void drm_encoder_disable(struct drm_encoder *encoder) { const struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; drm_bridge_disable(encoder->bridge); if (encoder_funcs->disable) (*encoder_funcs->disable)(encoder); else (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); drm_bridge_post_disable(encoder->bridge); } static void __drm_helper_disable_unused_functions(struct drm_device *dev) { struct drm_encoder *encoder; struct drm_crtc *crtc; drm_warn_on_modeset_not_all_locked(dev); drm_for_each_encoder(encoder, dev) { if (!drm_helper_encoder_in_use(encoder)) { drm_encoder_disable(encoder); /* disconnect encoder from any connector */ encoder->crtc = NULL; } } drm_for_each_crtc(crtc, dev) { const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; crtc->enabled = drm_helper_crtc_in_use(crtc); if (!crtc->enabled) { if (crtc_funcs->disable) (*crtc_funcs->disable)(crtc); else (*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF); crtc->primary->fb = NULL; } } } /** * drm_helper_disable_unused_functions - disable unused objects * @dev: DRM device * * This function walks through the entire mode setting configuration of @dev. It * will remove any crtc links of unused encoders and encoder links of * disconnected connectors. Then it will disable all unused encoders and crtcs * either by calling their disable callback if available or by calling their * dpms callback with DRM_MODE_DPMS_OFF. */ void drm_helper_disable_unused_functions(struct drm_device *dev) { drm_modeset_lock_all(dev); __drm_helper_disable_unused_functions(dev); drm_modeset_unlock_all(dev); } EXPORT_SYMBOL(drm_helper_disable_unused_functions); /* * Check the CRTC we're going to map each output to vs. its current * CRTC. If they don't match, we have to disable the output and the CRTC * since the driver will have to re-route things. */ static void drm_crtc_prepare_encoders(struct drm_device *dev) { const struct drm_encoder_helper_funcs *encoder_funcs; struct drm_encoder *encoder; drm_for_each_encoder(encoder, dev) { encoder_funcs = encoder->helper_private; /* Disable unused encoders */ if (encoder->crtc == NULL) drm_encoder_disable(encoder); /* Disable encoders whose CRTC is about to change */ if (encoder_funcs->get_crtc && encoder->crtc != (*encoder_funcs->get_crtc)(encoder)) drm_encoder_disable(encoder); } } /** * drm_crtc_helper_set_mode - internal helper to set a mode * @crtc: CRTC to program * @mode: mode to use * @x: horizontal offset into the surface * @y: vertical offset into the surface * @old_fb: old framebuffer, for cleanup * * Try to set @mode on @crtc. Give @crtc and its associated connectors a chance * to fixup or reject the mode prior to trying to set it. This is an internal * helper that drivers could e.g. use to update properties that require the * entire output pipe to be disabled and re-enabled in a new configuration. For * example for changing whether audio is enabled on a hdmi link or for changing * panel fitter or dither attributes. It is also called by the * drm_crtc_helper_set_config() helper function to drive the mode setting * sequence. * * Returns: * True if the mode was set successfully, false otherwise. */ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode; const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; const struct drm_encoder_helper_funcs *encoder_funcs; int saved_x, saved_y; bool saved_enabled; struct drm_encoder *encoder; bool ret = true; drm_warn_on_modeset_not_all_locked(dev); saved_enabled = crtc->enabled; crtc->enabled = drm_helper_crtc_in_use(crtc); if (!crtc->enabled) return true; adjusted_mode = drm_mode_duplicate(dev, mode); if (!adjusted_mode) { crtc->enabled = saved_enabled; return false; } saved_mode = crtc->mode; saved_hwmode = crtc->hwmode; saved_x = crtc->x; saved_y = crtc->y; /* Update crtc values up front so the driver can rely on them for mode * setting. */ crtc->mode = *mode; crtc->x = x; crtc->y = y; /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. */ drm_for_each_encoder(encoder, dev) { if (encoder->crtc != crtc) continue; ret = drm_bridge_mode_fixup(encoder->bridge, mode, adjusted_mode); if (!ret) { DRM_DEBUG_KMS("Bridge fixup failed\n"); goto done; } encoder_funcs = encoder->helper_private; if (!(ret = encoder_funcs->mode_fixup(encoder, mode, adjusted_mode))) { DRM_DEBUG_KMS("Encoder fixup failed\n"); goto done; } } if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) { DRM_DEBUG_KMS("CRTC fixup failed\n"); goto done; } DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id); crtc->hwmode = *adjusted_mode; /* Prepare the encoders and CRTCs before setting the mode. */ drm_for_each_encoder(encoder, dev) { if (encoder->crtc != crtc) continue; drm_bridge_disable(encoder->bridge); encoder_funcs = encoder->helper_private; /* Disable the encoders as the first thing we do. */ encoder_funcs->prepare(encoder); drm_bridge_post_disable(encoder->bridge); } drm_crtc_prepare_encoders(dev); crtc_funcs->prepare(crtc); /* Set up the DPLL and any encoders state that needs to adjust or depend * on the DPLL. */ ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); if (!ret) goto done; drm_for_each_encoder(encoder, dev) { if (encoder->crtc != crtc) continue; DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n", encoder->base.id, encoder->name, mode->base.id, mode->name); encoder_funcs = encoder->helper_private; encoder_funcs->mode_set(encoder, mode, adjusted_mode); drm_bridge_mode_set(encoder->bridge, mode, adjusted_mode); } /* Now enable the clocks, plane, pipe, and connectors that we set up. */ crtc_funcs->commit(crtc); drm_for_each_encoder(encoder, dev) { if (encoder->crtc != crtc) continue; drm_bridge_pre_enable(encoder->bridge); encoder_funcs = encoder->helper_private; encoder_funcs->commit(encoder); drm_bridge_enable(encoder->bridge); } /* Calculate and store various constants which * are later needed by vblank and swap-completion * timestamping. They are derived from true hwmode. */ drm_calc_timestamping_constants(crtc, &crtc->hwmode); /* FIXME: add subpixel order */ done: drm_mode_destroy(dev, adjusted_mode); if (!ret) { crtc->enabled = saved_enabled; crtc->mode = saved_mode; crtc->hwmode = saved_hwmode; crtc->x = saved_x; crtc->y = saved_y; } return ret; } EXPORT_SYMBOL(drm_crtc_helper_set_mode); static void drm_crtc_helper_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_connector *connector; struct drm_encoder *encoder; /* Decouple all encoders and their attached connectors from this crtc */ drm_for_each_encoder(encoder, dev) { if (encoder->crtc != crtc) continue; drm_for_each_connector(connector, dev) { if (connector->encoder != encoder) continue; connector->encoder = NULL; /* * drm_helper_disable_unused_functions() ought to be * doing this, but since we've decoupled the encoder * from the connector above, the required connection * between them is henceforth no longer available. */ connector->dpms = DRM_MODE_DPMS_OFF; } } __drm_helper_disable_unused_functions(dev); } /** * drm_crtc_helper_set_config - set a new config from userspace * @set: mode set configuration * * The drm_crtc_helper_set_config() helper function implements the set_config * callback of struct &drm_crtc_funcs for drivers using the legacy CRTC helpers. * * It first tries to locate the best encoder for each connector by calling the * connector best_encoder (struct &drm_connector_helper_funcs) helper operation. * * After locating the appropriate encoders, the helper function will call the * mode_fixup encoder and CRTC helper operations to adjust the requested mode, * or reject it completely in which case an error will be returned to the * application. If the new configuration after mode adjustment is identical to * the current configuration the helper function will return without performing * any other operation. * * If the adjusted mode is identical to the current mode but changes to the * frame buffer need to be applied, the drm_crtc_helper_set_config function will * call the CRTC mode_set_base (struct &drm_crtc_helper_funcs) helper operation. * * If the adjusted mode differs from the current mode, or if the mode_set_base * helper operation is not provided, the helper function performs a full mode * set sequence by calling the prepare, mode_set and commit CRTC and encoder * helper operations, in that order. Alternatively it can also use the dpms and * disable helper operations. For details see struct &drm_crtc_helper_funcs and * struct &drm_encoder_helper_funcs. * * This function is deprecated. New drivers must implement atomic modeset * support, for which this function is unsuitable. Instead drivers should use * drm_atomic_helper_set_config(). * * Returns: * Returns 0 on success, negative errno numbers on failure. */ int drm_crtc_helper_set_config(struct drm_mode_set *set) { struct drm_device *dev; struct drm_crtc *new_crtc; struct drm_encoder *save_encoders, *new_encoder, *encoder; bool mode_changed = false; /* if true do a full mode set */ bool fb_changed = false; /* if true and !mode_changed just do a flip */ struct drm_connector *save_connectors, *connector; int count = 0, ro, fail = 0; const struct drm_crtc_helper_funcs *crtc_funcs; struct drm_mode_set save_set; int ret; int i; DRM_DEBUG_KMS("\n"); BUG_ON(!set); BUG_ON(!set->crtc); BUG_ON(!set->crtc->helper_private); /* Enforce sane interface api - has been abused by the fb helper. */ BUG_ON(!set->mode && set->fb); BUG_ON(set->fb && set->num_connectors == 0); crtc_funcs = set->crtc->helper_private; if (!set->mode) set->fb = NULL; if (set->fb) { DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n", set->crtc->base.id, set->fb->base.id, (int)set->num_connectors, set->x, set->y); } else { DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); drm_crtc_helper_disable(set->crtc); return 0; } dev = set->crtc->dev; drm_warn_on_modeset_not_all_locked(dev); /* * Allocate space for the backup of all (non-pointer) encoder and * connector data. */ save_encoders = kzalloc(dev->mode_config.num_encoder * sizeof(struct drm_encoder), GFP_KERNEL); if (!save_encoders) return -ENOMEM; save_connectors = kzalloc(dev->mode_config.num_connector * sizeof(struct drm_connector), GFP_KERNEL); if (!save_connectors) { kfree(save_encoders); return -ENOMEM; } /* * Copy data. Note that driver private data is not affected. * Should anything bad happen only the expected state is * restored, not the drivers personal bookkeeping. */ count = 0; drm_for_each_encoder(encoder, dev) { save_encoders[count++] = *encoder; } count = 0; drm_for_each_connector(connector, dev) { save_connectors[count++] = *connector; } save_set.crtc = set->crtc; save_set.mode = &set->crtc->mode; save_set.x = set->crtc->x; save_set.y = set->crtc->y; save_set.fb = set->crtc->primary->fb; /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ if (set->crtc->primary->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->primary->fb == NULL) { DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); mode_changed = true; } else if (set->fb == NULL) { mode_changed = true; } else if (set->fb->pixel_format != set->crtc->primary->fb->pixel_format) { mode_changed = true; } else fb_changed = true; } if (set->x != set->crtc->x || set->y != set->crtc->y) fb_changed = true; if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { DRM_DEBUG_KMS("modes are different, full mode set\n"); drm_mode_debug_printmodeline(&set->crtc->mode); drm_mode_debug_printmodeline(set->mode); mode_changed = true; } /* a) traverse passed in connector list and get encoders for them */ count = 0; drm_for_each_connector(connector, dev) { const struct drm_connector_helper_funcs *connector_funcs = connector->helper_private; new_encoder = connector->encoder; for (ro = 0; ro < set->num_connectors; ro++) { if (set->connectors[ro] == connector) { new_encoder = connector_funcs->best_encoder(connector); /* if we can't get an encoder for a connector we are setting now - then fail */ if (new_encoder == NULL) /* don't break so fail path works correct */ fail = 1; if (connector->dpms != DRM_MODE_DPMS_ON) { DRM_DEBUG_KMS("connector dpms not on, full mode switch\n"); mode_changed = true; } break; } } if (new_encoder != connector->encoder) { DRM_DEBUG_KMS("encoder changed, full mode switch\n"); mode_changed = true; /* If the encoder is reused for another connector, then * the appropriate crtc will be set later. */ if (connector->encoder) connector->encoder->crtc = NULL; connector->encoder = new_encoder; } } if (fail) { ret = -EINVAL; goto fail; } count = 0; drm_for_each_connector(connector, dev) { if (!connector->encoder) continue; if (connector->encoder->crtc == set->crtc) new_crtc = NULL; else new_crtc = connector->encoder->crtc; for (ro = 0; ro < set->num_connectors; ro++) { if (set->connectors[ro] == connector) new_crtc = set->crtc; } /* Make sure the new CRTC will work with the encoder */ if (new_crtc && !drm_encoder_crtc_ok(connector->encoder, new_crtc)) { ret = -EINVAL; goto fail; } if (new_crtc != connector->encoder->crtc) { DRM_DEBUG_KMS("crtc changed, full mode switch\n"); mode_changed = true; connector->encoder->crtc = new_crtc; } if (new_crtc) { DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n", connector->base.id, connector->name, new_crtc->base.id); } else { DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n", connector->base.id, connector->name); } } /* mode_set_base is not a required function */ if (fb_changed && !crtc_funcs->mode_set_base) mode_changed = true; if (mode_changed) { if (drm_helper_crtc_in_use(set->crtc)) { DRM_DEBUG_KMS("attempting to set mode from" " userspace\n"); drm_mode_debug_printmodeline(set->mode); set->crtc->primary->fb = set->fb; if (!drm_crtc_helper_set_mode(set->crtc, set->mode, set->x, set->y, save_set.fb)) { DRM_ERROR("failed to set mode on [CRTC:%d]\n", set->crtc->base.id); set->crtc->primary->fb = save_set.fb; ret = -EINVAL; goto fail; } DRM_DEBUG_KMS("Setting connector DPMS state to on\n"); for (i = 0; i < set->num_connectors; i++) { DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id, set->connectors[i]->name); set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON); } } __drm_helper_disable_unused_functions(dev); } else if (fb_changed) { set->crtc->x = set->x; set->crtc->y = set->y; set->crtc->primary->fb = set->fb; ret = crtc_funcs->mode_set_base(set->crtc, set->x, set->y, save_set.fb); if (ret != 0) { set->crtc->x = save_set.x; set->crtc->y = save_set.y; set->crtc->primary->fb = save_set.fb; goto fail; } } kfree(save_connectors); kfree(save_encoders); return 0; fail: /* Restore all previous data. */ count = 0; drm_for_each_encoder(encoder, dev) { *encoder = save_encoders[count++]; } count = 0; drm_for_each_connector(connector, dev) { *connector = save_connectors[count++]; } /* Try to restore the config */ if (mode_changed && !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x, save_set.y, save_set.fb)) DRM_ERROR("failed to restore config after modeset failure\n"); kfree(save_connectors); kfree(save_encoders); return ret; } EXPORT_SYMBOL(drm_crtc_helper_set_config); static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder) { int dpms = DRM_MODE_DPMS_OFF; struct drm_connector *connector; struct drm_device *dev = encoder->dev; drm_for_each_connector(connector, dev) if (connector->encoder == encoder) if (connector->dpms < dpms) dpms = connector->dpms; return dpms; } /* Helper which handles bridge ordering around encoder dpms */ static void drm_helper_encoder_dpms(struct drm_encoder *encoder, int mode) { struct drm_bridge *bridge = encoder->bridge; const struct drm_encoder_helper_funcs *encoder_funcs; if (mode == DRM_MODE_DPMS_ON) drm_bridge_pre_enable(bridge); else drm_bridge_disable(bridge); encoder_funcs = encoder->helper_private; if (encoder_funcs->dpms) encoder_funcs->dpms(encoder, mode); if (mode == DRM_MODE_DPMS_ON) drm_bridge_enable(bridge); else drm_bridge_post_disable(bridge); } static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc) { int dpms = DRM_MODE_DPMS_OFF; struct drm_connector *connector; struct drm_device *dev = crtc->dev; drm_for_each_connector(connector, dev) if (connector->encoder && connector->encoder->crtc == crtc) if (connector->dpms < dpms) dpms = connector->dpms; return dpms; } /** * drm_helper_connector_dpms() - connector dpms helper implementation * @connector: affected connector * @mode: DPMS mode * * The drm_helper_connector_dpms() helper function implements the dpms * callback of struct &drm_connector_funcs for drivers using the legacy CRTC helpers. * * This is the main helper function provided by the crtc helper framework for * implementing the DPMS connector attribute. It computes the new desired DPMS * state for all encoders and crtcs in the output mesh and calls the ->dpms() * callbacks provided by the driver in struct &drm_crtc_helper_funcs and struct * &drm_encoder_helper_funcs appropriately. * * This function is deprecated. New drivers must implement atomic modeset * support, for which this function is unsuitable. Instead drivers should use * drm_atomic_helper_connector_dpms(). * * Returns: * Always returns 0. */ int drm_helper_connector_dpms(struct drm_connector *connector, int mode) { struct drm_encoder *encoder = connector->encoder; struct drm_crtc *crtc = encoder ? encoder->crtc : NULL; int old_dpms, encoder_dpms = DRM_MODE_DPMS_OFF; if (mode == connector->dpms) return 0; old_dpms = connector->dpms; connector->dpms = mode; if (encoder) encoder_dpms = drm_helper_choose_encoder_dpms(encoder); /* from off to on, do crtc then encoder */ if (mode < old_dpms) { if (crtc) { const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; if (crtc_funcs->dpms) (*crtc_funcs->dpms) (crtc, drm_helper_choose_crtc_dpms(crtc)); } if (encoder) drm_helper_encoder_dpms(encoder, encoder_dpms); } /* from on to off, do encoder then crtc */ if (mode > old_dpms) { if (encoder) drm_helper_encoder_dpms(encoder, encoder_dpms); if (crtc) { const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; if (crtc_funcs->dpms) (*crtc_funcs->dpms) (crtc, drm_helper_choose_crtc_dpms(crtc)); } } return 0; } EXPORT_SYMBOL(drm_helper_connector_dpms); /** * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata * @fb: drm_framebuffer object to fill out * @mode_cmd: metadata from the userspace fb creation request * * This helper can be used in a drivers fb_create callback to pre-fill the fb's * metadata fields. */ void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb, const struct drm_mode_fb_cmd2 *mode_cmd) { int i; fb->width = mode_cmd->width; fb->height = mode_cmd->height; for (i = 0; i < 4; i++) { fb->pitches[i] = mode_cmd->pitches[i]; fb->offsets[i] = mode_cmd->offsets[i]; fb->modifier[i] = mode_cmd->modifier[i]; } drm_fb_get_bpp_depth(mode_cmd->pixel_format, &fb->depth, &fb->bits_per_pixel); fb->pixel_format = mode_cmd->pixel_format; fb->flags = mode_cmd->flags; } EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct); /** * drm_helper_resume_force_mode - force-restore mode setting configuration * @dev: drm_device which should be restored * * Drivers which use the mode setting helpers can use this function to * force-restore the mode setting configuration e.g. on resume or when something * else might have trampled over the hw state (like some overzealous old BIOSen * tended to do). * * This helper doesn't provide a error return value since restoring the old * config should never fail due to resource allocation issues since the driver * has successfully set the restored configuration already. Hence this should * boil down to the equivalent of a few dpms on calls, which also don't provide * an error code. * * Drivers where simply restoring an old configuration again might fail (e.g. * due to slight differences in allocating shared resources when the * configuration is restored in a different order than when userspace set it up) * need to use their own restore logic. * * This function is deprecated. New drivers should implement atomic mode- * setting and use the atomic suspend/resume helpers. * * See also: * drm_atomic_helper_suspend(), drm_atomic_helper_resume() */ void drm_helper_resume_force_mode(struct drm_device *dev) { struct drm_crtc *crtc; struct drm_encoder *encoder; const struct drm_crtc_helper_funcs *crtc_funcs; int encoder_dpms; bool ret; drm_modeset_lock_all(dev); drm_for_each_crtc(crtc, dev) { if (!crtc->enabled) continue; ret = drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->primary->fb); /* Restoring the old config should never fail! */ if (ret == false) DRM_ERROR("failed to set mode on crtc %p\n", crtc); /* Turn off outputs that were already powered off */ if (drm_helper_choose_crtc_dpms(crtc)) { drm_for_each_encoder(encoder, dev) { if(encoder->crtc != crtc) continue; encoder_dpms = drm_helper_choose_encoder_dpms( encoder); drm_helper_encoder_dpms(encoder, encoder_dpms); } crtc_funcs = crtc->helper_private; if (crtc_funcs->dpms) (*crtc_funcs->dpms) (crtc, drm_helper_choose_crtc_dpms(crtc)); } } /* disable the unused connectors while restoring the modesetting */ __drm_helper_disable_unused_functions(dev); drm_modeset_unlock_all(dev); } EXPORT_SYMBOL(drm_helper_resume_force_mode); /** * drm_helper_crtc_mode_set - mode_set implementation for atomic plane helpers * @crtc: DRM CRTC * @mode: DRM display mode which userspace requested * @adjusted_mode: DRM display mode adjusted by ->mode_fixup callbacks * @x: x offset of the CRTC scanout area on the underlying framebuffer * @y: y offset of the CRTC scanout area on the underlying framebuffer * @old_fb: previous framebuffer * * This function implements a callback useable as the ->mode_set callback * required by the crtc helpers. Besides the atomic plane helper functions for * the primary plane the driver must also provide the ->mode_set_nofb callback * to set up the crtc. * * This is a transitional helper useful for converting drivers to the atomic * interfaces. */ int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_crtc_state *crtc_state; const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; int ret; if (crtc->funcs->atomic_duplicate_state) crtc_state = crtc->funcs->atomic_duplicate_state(crtc); else { if (!crtc->state) drm_atomic_helper_crtc_reset(crtc); crtc_state = drm_atomic_helper_crtc_duplicate_state(crtc); } if (!crtc_state) return -ENOMEM; crtc_state->planes_changed = true; crtc_state->mode_changed = true; ret = drm_atomic_set_mode_for_crtc(crtc_state, mode); if (ret) goto out; drm_mode_copy(&crtc_state->adjusted_mode, adjusted_mode); if (crtc_funcs->atomic_check) { ret = crtc_funcs->atomic_check(crtc, crtc_state); if (ret) goto out; } swap(crtc->state, crtc_state); crtc_funcs->mode_set_nofb(crtc); ret = drm_helper_crtc_mode_set_base(crtc, x, y, old_fb); out: if (crtc_state) { if (crtc->funcs->atomic_destroy_state) crtc->funcs->atomic_destroy_state(crtc, crtc_state); else drm_atomic_helper_crtc_destroy_state(crtc, crtc_state); } return ret; } EXPORT_SYMBOL(drm_helper_crtc_mode_set); /** * drm_helper_crtc_mode_set_base - mode_set_base implementation for atomic plane helpers * @crtc: DRM CRTC * @x: x offset of the CRTC scanout area on the underlying framebuffer * @y: y offset of the CRTC scanout area on the underlying framebuffer * @old_fb: previous framebuffer * * This function implements a callback useable as the ->mode_set_base used * required by the crtc helpers. The driver must provide the atomic plane helper * functions for the primary plane. * * This is a transitional helper useful for converting drivers to the atomic * interfaces. */ int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct drm_plane_state *plane_state; struct drm_plane *plane = crtc->primary; if (plane->funcs->atomic_duplicate_state) plane_state = plane->funcs->atomic_duplicate_state(plane); else if (plane->state) plane_state = drm_atomic_helper_plane_duplicate_state(plane); else plane_state = kzalloc(sizeof(*plane_state), GFP_KERNEL); if (!plane_state) return -ENOMEM; plane_state->plane = plane; plane_state->crtc = crtc; drm_atomic_set_fb_for_plane(plane_state, crtc->primary->fb); plane_state->crtc_x = 0; plane_state->crtc_y = 0; plane_state->crtc_h = crtc->mode.vdisplay; plane_state->crtc_w = crtc->mode.hdisplay; plane_state->src_x = x << 16; plane_state->src_y = y << 16; plane_state->src_h = crtc->mode.vdisplay << 16; plane_state->src_w = crtc->mode.hdisplay << 16; return drm_plane_helper_commit(plane, plane_state, old_fb); } EXPORT_SYMBOL(drm_helper_crtc_mode_set_base);