From 7c1e76897492d92b6a1c2d6892494d39ded9680c Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Wed, 3 Sep 2008 21:36:50 +0000 Subject: clockevents: prevent clockevent event_handler ending up handler_noop There is a ordering related problem with clockevents code, due to which clockevents_register_device() called after tickless/highres switch will not work. The new clockevent ends up with clockevents_handle_noop as event handler, resulting in no timer activity. The problematic path seems to be * old device already has hrtimer_interrupt as the event_handler * new clockevent device registers with a higher rating * tick_check_new_device() is called * clockevents_exchange_device() gets called * old->event_handler is set to clockevents_handle_noop * tick_setup_device() is called for the new device * which sets new->event_handler using the old->event_handler which is noop. Change the ordering so that new device inherits the proper handler. This does not have any issue in normal case as most likely all the clockevent devices are setup before the highres switch. But, can potentially be affecting some corner case where HPET force detect happens after the highres switch. This was a problem with HPET in MSI mode code that we have been experimenting with. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Shaohua Li Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/clockevents.c | 3 +-- kernel/time/tick-common.c | 1 + 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'kernel/time') diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 3d1e3e1a1971..1876b526c778 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -177,7 +177,7 @@ void clockevents_register_device(struct clock_event_device *dev) /* * Noop handler when we shut down an event device */ -static void clockevents_handle_noop(struct clock_event_device *dev) +void clockevents_handle_noop(struct clock_event_device *dev) { } @@ -199,7 +199,6 @@ void clockevents_exchange_device(struct clock_event_device *old, * released list and do a notify add later. */ if (old) { - old->event_handler = clockevents_handle_noop; clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED); list_del(&old->list); list_add(&old->list, &clockevents_released); diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 80c4336f4188..c4777193d567 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -161,6 +161,7 @@ static void tick_setup_device(struct tick_device *td, } else { handler = td->evtdev->event_handler; next_event = td->evtdev->next_event; + td->evtdev->event_handler = clockevents_handle_noop; } td->evtdev = newdev; -- cgit v1.2.3 From d4496b39559c6d43f83e4c08b899984f8b8089b5 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:36:57 +0000 Subject: clockevents: prevent endless loop in periodic broadcast handler The reprogramming of the periodic broadcast handler was broken, when the first programming returned -ETIME. The clockevents code stores the new expiry value in the clock events device next_event field only when the programming time has not been elapsed yet. The loop in question calculates the new expiry value from the next_event value and therefor never increases. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'kernel/time') diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 31463d370b94..3044a88357fa 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -175,6 +175,8 @@ static void tick_do_periodic_broadcast(void) */ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) { + ktime_t next; + tick_do_periodic_broadcast(); /* @@ -185,10 +187,13 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) /* * Setup the next period for devices, which do not have - * periodic mode: + * periodic mode. We read dev->next_event first and add to it + * when the event alrady expired. clockevents_program_event() + * sets dev->next_event only when the event is really + * programmed to the device. */ - for (;;) { - ktime_t next = ktime_add(dev->next_event, tick_period); + for (next = dev->next_event; ;) { + next = ktime_add(next, tick_period); if (!clockevents_program_event(dev, next, ktime_get())) return; -- cgit v1.2.3 From 7205656ab48da29a95d7f55e43a81db755d3cb3a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:37:03 +0000 Subject: clockevents: enforce reprogram in oneshot setup In tick_oneshot_setup we program the device to the given next_event, but we do not check the return value. We need to make sure that the device is programmed enforced so the interrupt handler engine starts working. Split out the reprogramming function from tick_program_event() and call it with the device, which was handed in to tick_setup_oneshot(). Set the force argument, so the devices is firing an interrupt. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-oneshot.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'kernel/time') diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c index 450c04935b66..06595c64b0c9 100644 --- a/kernel/time/tick-oneshot.c +++ b/kernel/time/tick-oneshot.c @@ -23,11 +23,11 @@ #include "tick-internal.h" /** - * tick_program_event + * tick_program_event internal worker function */ -int tick_program_event(ktime_t expires, int force) +static int __tick_program_event(struct clock_event_device *dev, + ktime_t expires, int force) { - struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; ktime_t now = ktime_get(); while (1) { @@ -40,6 +40,16 @@ int tick_program_event(ktime_t expires, int force) } } +/** + * tick_program_event + */ +int tick_program_event(ktime_t expires, int force) +{ + struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; + + return __tick_program_event(dev, expires, force); +} + /** * tick_resume_onshot - resume oneshot mode */ @@ -61,7 +71,7 @@ void tick_setup_oneshot(struct clock_event_device *newdev, { newdev->event_handler = handler; clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT); - clockevents_program_event(newdev, next_event, ktime_get()); + __tick_program_event(newdev, next_event, 1); } /** -- cgit v1.2.3 From 9c17bcda991000351cb2373f78be7e4b1c44caa3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:37:08 +0000 Subject: clockevents: prevent multiple init/shutdown While chasing the C1E/HPET bugreports I went through the clock events code inch by inch and found that the broadcast device can be initialized and shutdown multiple times. Multiple shutdowns are not critical, but useless waste of time. Multiple initializations are simply broken. Another CPU might have the device in use already after the first initialization and the second init could just render it unusable again. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'kernel/time') diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 3044a88357fa..5744f40b2697 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -210,7 +210,7 @@ static void tick_do_broadcast_on_off(void *why) struct clock_event_device *bc, *dev; struct tick_device *td; unsigned long flags, *reason = why; - int cpu; + int cpu, bc_stopped; spin_lock_irqsave(&tick_broadcast_lock, flags); @@ -228,6 +228,8 @@ static void tick_do_broadcast_on_off(void *why) if (!tick_device_is_functional(dev)) goto out; + bc_stopped = cpus_empty(tick_broadcast_mask); + switch (*reason) { case CLOCK_EVT_NOTIFY_BROADCAST_ON: case CLOCK_EVT_NOTIFY_BROADCAST_FORCE: @@ -250,9 +252,10 @@ static void tick_do_broadcast_on_off(void *why) break; } - if (cpus_empty(tick_broadcast_mask)) - clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); - else { + if (cpus_empty(tick_broadcast_mask)) { + if (!bc_stopped) + clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); + } else if (bc_stopped) { if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) tick_broadcast_start_periodic(bc); else @@ -501,9 +504,12 @@ static void tick_broadcast_clear_oneshot(int cpu) */ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { - bc->event_handler = tick_handle_oneshot_broadcast; - clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); - bc->next_event.tv64 = KTIME_MAX; + /* Set it up only once ! */ + if (bc->event_handler != tick_handle_oneshot_broadcast) { + bc->event_handler = tick_handle_oneshot_broadcast; + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); + bc->next_event.tv64 = KTIME_MAX; + } } /* -- cgit v1.2.3 From 1fb9b7d29d8e85ba3196eaa7ab871bf76fc98d36 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:37:14 +0000 Subject: clockevents: prevent endless loop lockup The C1E/HPET bug reports on AMDX2/RS690 systems where tracked down to a too small value of the HPET minumum delta for programming an event. The clockevents code needs to enforce an interrupt event on the clock event device in some cases. The enforcement code was stupid and naive, as it just added the minimum delta to the current time and tried to reprogram the device. When the minimum delta is too small, then this loops forever. Add a sanity check. Allow reprogramming to fail 3 times, then print a warning and double the minimum delta value to make sure, that this does not happen again. Use the same function for both tick-oneshot and tick-broadcast code. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 12 ++---------- kernel/time/tick-internal.h | 2 ++ kernel/time/tick-oneshot.c | 36 ++++++++++++++++++++++++++++++------ 3 files changed, 34 insertions(+), 16 deletions(-) (limited to 'kernel/time') diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 5744f40b2697..2bc1f046151c 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -372,16 +372,8 @@ cpumask_t *tick_get_broadcast_oneshot_mask(void) static int tick_broadcast_set_event(ktime_t expires, int force) { struct clock_event_device *bc = tick_broadcast_device.evtdev; - ktime_t now = ktime_get(); - int res; - - for(;;) { - res = clockevents_program_event(bc, expires, now); - if (!res || !force) - return res; - now = ktime_get(); - expires = ktime_add(now, ktime_set(0, bc->min_delta_ns)); - } + + return tick_dev_program_event(bc, expires, force); } int tick_resume_broadcast_oneshot(struct clock_event_device *bc) diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index f13f2b7f4fd4..0ffc2918ea6f 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -17,6 +17,8 @@ extern void tick_handle_periodic(struct clock_event_device *dev); extern void tick_setup_oneshot(struct clock_event_device *newdev, void (*handler)(struct clock_event_device *), ktime_t nextevt); +extern int tick_dev_program_event(struct clock_event_device *dev, + ktime_t expires, int force); extern int tick_program_event(ktime_t expires, int force); extern void tick_oneshot_notify(void); extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *)); diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c index 06595c64b0c9..2e35501e61dd 100644 --- a/kernel/time/tick-oneshot.c +++ b/kernel/time/tick-oneshot.c @@ -25,18 +25,42 @@ /** * tick_program_event internal worker function */ -static int __tick_program_event(struct clock_event_device *dev, - ktime_t expires, int force) +int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires, + int force) { ktime_t now = ktime_get(); + int i; - while (1) { + for (i = 0;;) { int ret = clockevents_program_event(dev, expires, now); if (!ret || !force) return ret; + + /* + * We tried 2 times to program the device with the given + * min_delta_ns. If that's not working then we double it + * and emit a warning. + */ + if (++i > 2) { + printk(KERN_WARNING "CE: __tick_program_event of %s is " + "stuck %llx %llx\n", dev->name ? dev->name : "?", + now.tv64, expires.tv64); + printk(KERN_WARNING + "CE: increasing min_delta_ns %ld to %ld nsec\n", + dev->min_delta_ns, dev->min_delta_ns << 1); + WARN_ON(1); + + /* Double the min. delta and try again */ + if (!dev->min_delta_ns) + dev->min_delta_ns = 5000; + else + dev->min_delta_ns <<= 1; + i = 0; + } + now = ktime_get(); - expires = ktime_add(now, ktime_set(0, dev->min_delta_ns)); + expires = ktime_add_ns(now, dev->min_delta_ns); } } @@ -47,7 +71,7 @@ int tick_program_event(ktime_t expires, int force) { struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; - return __tick_program_event(dev, expires, force); + return tick_dev_program_event(dev, expires, force); } /** @@ -71,7 +95,7 @@ void tick_setup_oneshot(struct clock_event_device *newdev, { newdev->event_handler = handler; clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT); - __tick_program_event(newdev, next_event, 1); + tick_dev_program_event(newdev, next_event, 1); } /** -- cgit v1.2.3 From 7300711e8c6824fcfbd42a126980ff50439d8dd0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 6 Sep 2008 03:01:45 +0200 Subject: clockevents: broadcast fixup possible waiters Until the C1E patches arrived there where no users of periodic broadcast before switching to oneshot mode. Now we need to trigger a possible waiter for a periodic broadcast when switching to oneshot mode. Otherwise we can starve them for ever. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'kernel/time') diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 2bc1f046151c..2f5a38294bf9 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -491,6 +491,18 @@ static void tick_broadcast_clear_oneshot(int cpu) cpu_clear(cpu, tick_broadcast_oneshot_mask); } +static void tick_broadcast_init_next_event(cpumask_t *mask, ktime_t expires) +{ + struct tick_device *td; + int cpu; + + for_each_cpu_mask_nr(cpu, *mask) { + td = &per_cpu(tick_cpu_device, cpu); + if (td->evtdev) + td->evtdev->next_event = expires; + } +} + /** * tick_broadcast_setup_oneshot - setup the broadcast device */ @@ -498,9 +510,32 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { /* Set it up only once ! */ if (bc->event_handler != tick_handle_oneshot_broadcast) { + int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC; + int cpu = smp_processor_id(); + cpumask_t mask; + bc->event_handler = tick_handle_oneshot_broadcast; clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); - bc->next_event.tv64 = KTIME_MAX; + + /* Take the do_timer update */ + tick_do_timer_cpu = cpu; + + /* + * We must be careful here. There might be other CPUs + * waiting for periodic broadcast. We need to set the + * oneshot_mask bits for those and program the + * broadcast device to fire. + */ + mask = tick_broadcast_mask; + cpu_clear(cpu, mask); + cpus_or(tick_broadcast_oneshot_mask, + tick_broadcast_oneshot_mask, mask); + + if (was_periodic && !cpus_empty(mask)) { + tick_broadcast_init_next_event(&mask, tick_next_period); + tick_broadcast_set_event(tick_next_period, 1); + } else + bc->next_event.tv64 = KTIME_MAX; } } -- cgit v1.2.3 From 4ff4b9e19a80b73959ebeb28d1df40176686f0a8 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 5 Sep 2008 14:05:31 -0700 Subject: ntp: fix calculation of the next jiffie to trigger RTC sync We have a bug in the calculation of the next jiffie to trigger the RTC synchronisation. The aim here is to run sync_cmos_clock() as close as possible to the middle of a second. Which means we want this function to be called less than or equal to half a jiffie away from when now.tv_nsec equals 5e8 (500000000). If this is not the case for a given call to the function, for this purpose instead of updating the RTC we calculate the offset in nanoseconds to the next point in time where now.tv_nsec will be equal 5e8. The calculated offset is then converted to jiffies as these are the unit used by the timer. Hovewer timespec_to_jiffies() used here uses a ceil()-type rounding mode, where the resulting value is rounded up. As a result the range of now.tv_nsec when the timer will trigger is from 5e8 to 5e8 + TICK_NSEC rather than the desired 5e8 - TICK_NSEC / 2 to 5e8 + TICK_NSEC / 2. As a result if for example sync_cmos_clock() happens to be called at the time when now.tv_nsec is between 5e8 + TICK_NSEC / 2 and 5e8 to 5e8 + TICK_NSEC, it will simply be rescheduled HZ jiffies later, falling in the same range of now.tv_nsec again. Similarly for cases offsetted by an integer multiple of TICK_NSEC. This change addresses the problem by subtracting TICK_NSEC / 2 from the nanosecond offset to the next point in time where now.tv_nsec will be equal 5e8, effectively shifting the following rounding in timespec_to_jiffies() so that it produces a rounded-to-nearest result. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/time/ntp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel/time') diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 5125ddd8196b..1ad46f3df6e7 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -245,7 +245,7 @@ static void sync_cmos_clock(unsigned long dummy) if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2) fail = update_persistent_clock(now); - next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec; + next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2); if (next.tv_nsec <= 0) next.tv_nsec += NSEC_PER_SEC; -- cgit v1.2.3