From 9a27d5916b1d0338f76a4a8cb6fabc5320664453 Mon Sep 17 00:00:00 2001
From: Guoqing Li <ligq@marvell.com>
Date: Fri, 13 Sep 2013 14:59:45 +0800
Subject: video: mmp: rb swap setting update for mmp display

We could set rb swap in two modules: DMA controler input part and
dsi interface output part.
DMA input part is based on pix_fmt to set rbswap, dsi output interface
part will set rbswap based on platform dsi_rbswap configuration.

This patch include below change and enhancement:

1) The input format which support rbswap is based on RGB format,
eg. RGB565 indicates the source data in memory is that Red is [15~11],
Green is [10~5], Blue is [4:0], Red is MSB, Blue is LSB, but for the
display dma input default setting(rbswap = 0), it only support Blue
is [15~11], Green is [10~5], Red is [4:0], Red is LSB, Blue is MSB,
so for this format(RGB565), display controller need to set rbswap
 = 1 and it can support the MSB/LSB correctly.
BGR/YUV format will not set it in mmp display driver.

2) The dsi output part of rbswap is depend on dsi_rbswap which is
defined in specific platfrom. For output dsi interface, it has this
feature to do rbswap again if it needs specifc byte sequence of RGB
byte for DSI panel.
eg. If display content is set RGB565 in memory and DMA input part set
rbswap in driver to support Red as MSB , Blue LSB, but dsi panel only
support Red as LSB, Blue as MSB, then it can use this feature.
If there is no this requirement of panel, this dsi output part is not
needed.

Signed-off-by: Guoqing Li <ligq@marvell.com>
Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Zhou Zhu <zzhu3@marvell.com>
Reviewed-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 include/video/mmp_disp.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include')

diff --git a/include/video/mmp_disp.h b/include/video/mmp_disp.h
index b9dd1fbb0082..32094c052deb 100644
--- a/include/video/mmp_disp.h
+++ b/include/video/mmp_disp.h
@@ -334,6 +334,7 @@ struct mmp_mach_path_config {
 	int output_type;
 	u32 path_config;
 	u32 link_config;
+	u32 dsi_rbswap;
 };
 
 struct mmp_mach_plat_info {
-- 
cgit v1.2.3


From 24586d8342ab27bc75e4560d71e98f3e5dc67d8e Mon Sep 17 00:00:00 2001
From: Jing Xiang <jxiang@marvell.com>
Date: Fri, 13 Sep 2013 14:59:49 +0800
Subject: video: mmp: add pitch info in mmp_win structure

Add pitch length info of graphics/video layer, pitch is used
to represent line length in byte, the usage depends on pix_fmt.
If the fmt is YUV, the pitch[0] will be Y length,pitch[1]
will be U length, pitch[2] will be V lenth.
If the fmt is RGB, the picth[0] will be line lenth, and
pitch[1]/pitch[2] will be 0 and not be used.

Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Zhou Zhu <zzhu3@marvell.com>
Reviewed-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/mmp/fb/mmpfb.c    |  6 ++++++
 drivers/video/mmp/hw/mmp_ctrl.c | 30 +++++++++++++++++++++++-------
 include/video/mmp_disp.h        |  5 +++++
 3 files changed, 34 insertions(+), 7 deletions(-)

(limited to 'include')

diff --git a/drivers/video/mmp/fb/mmpfb.c b/drivers/video/mmp/fb/mmpfb.c
index 19fd913f462d..7ab31eb76a8c 100644
--- a/drivers/video/mmp/fb/mmpfb.c
+++ b/drivers/video/mmp/fb/mmpfb.c
@@ -395,12 +395,18 @@ static int var_update(struct fb_info *info)
 static void mmpfb_set_win(struct fb_info *info)
 {
 	struct mmpfb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
 	struct mmp_win win;
+	u32 stride;
 
 	memset(&win, 0, sizeof(win));
 	win.xsrc = win.xdst = fbi->mode.xres;
 	win.ysrc = win.ydst = fbi->mode.yres;
 	win.pix_fmt = fbi->pix_fmt;
+	stride = pixfmt_to_stride(win.pix_fmt);
+	win.pitch[0] = var->xres_virtual * stride;
+	win.pitch[1] = win.pitch[2] =
+		(stride == 1) ? (var->xres_virtual >> 1) : 0;
 	mmp_overlay_set_win(fbi->overlay, &win);
 }
 
diff --git a/drivers/video/mmp/hw/mmp_ctrl.c b/drivers/video/mmp/hw/mmp_ctrl.c
index c0eb8bccfb87..ae724aaaad47 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.c
+++ b/drivers/video/mmp/hw/mmp_ctrl.c
@@ -142,17 +142,27 @@ static void dmafetch_set_fmt(struct mmp_overlay *overlay)
 static void overlay_set_win(struct mmp_overlay *overlay, struct mmp_win *win)
 {
 	struct lcd_regs *regs = path_regs(overlay->path);
-	u32 pitch;
 
 	/* assert win supported */
 	memcpy(&overlay->win, win, sizeof(struct mmp_win));
 
 	mutex_lock(&overlay->access_ok);
-	pitch = win->xsrc * pixfmt_to_stride(win->pix_fmt);
-	writel_relaxed(pitch, &regs->g_pitch);
-	writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->g_size);
-	writel_relaxed((win->ydst << 16) | win->xdst, &regs->g_size_z);
-	writel_relaxed(0, &regs->g_start);
+
+	if (overlay_is_vid(overlay)) {
+		writel_relaxed(win->pitch[0], &regs->v_pitch_yc);
+		writel_relaxed(win->pitch[2] << 16 |
+				win->pitch[1], &regs->v_pitch_uv);
+
+		writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->v_size);
+		writel_relaxed((win->ydst << 16) | win->xdst, &regs->v_size_z);
+		writel_relaxed(win->ypos << 16 | win->xpos, &regs->v_start);
+	} else {
+		writel_relaxed(win->pitch[0], &regs->g_pitch);
+
+		writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->g_size);
+		writel_relaxed((win->ydst << 16) | win->xdst, &regs->g_size_z);
+		writel_relaxed(win->ypos << 16 | win->xpos, &regs->g_start);
+	}
 
 	dmafetch_set_fmt(overlay);
 	mutex_unlock(&overlay->access_ok);
@@ -234,7 +244,13 @@ static int overlay_set_addr(struct mmp_overlay *overlay, struct mmp_addr *addr)
 
 	/* FIXME: assert addr supported */
 	memcpy(&overlay->addr, addr, sizeof(struct mmp_addr));
-	writel(addr->phys[0], &regs->g_0);
+
+	if (overlay_is_vid(overlay)) {
+		writel_relaxed(addr->phys[0], &regs->v_y0);
+		writel_relaxed(addr->phys[1], &regs->v_u0);
+		writel_relaxed(addr->phys[2], &regs->v_v0);
+	} else
+		writel_relaxed(addr->phys[0], &regs->g_0);
 
 	return overlay->addr.phys[0];
 }
diff --git a/include/video/mmp_disp.h b/include/video/mmp_disp.h
index 32094c052deb..9fd9398368d5 100644
--- a/include/video/mmp_disp.h
+++ b/include/video/mmp_disp.h
@@ -91,6 +91,11 @@ struct mmp_win {
 	u16	up_crop;
 	u16	bottom_crop;
 	int	pix_fmt;
+	/*
+	 * pitch[0]: graphics/video layer line length or y pitch
+	 * pitch[1]/pitch[2]: video u/v pitch if non-zero
+	 */
+	u32	pitch[3];
 };
 
 struct mmp_addr {
-- 
cgit v1.2.3


From 8af2c2869fd129bce0d0dfd86c6364c1096f9eff Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Thu, 28 Mar 2013 22:53:42 +0800
Subject: video: atmel_lcdfb: fix platform data struct

Today we mix pdata and drivers data in the struct atmel_lcdfb_info
Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-at91/at91sam9261_devices.c    |   6 +-
 arch/arm/mach-at91/at91sam9263_devices.c    |   6 +-
 arch/arm/mach-at91/at91sam9g45_devices.c    |   6 +-
 arch/arm/mach-at91/at91sam9rl_devices.c     |   6 +-
 arch/arm/mach-at91/board-sam9261ek.c        |   6 +-
 arch/arm/mach-at91/board-sam9263ek.c        |   4 +-
 arch/arm/mach-at91/board-sam9m10g45ek.c     |   4 +-
 arch/arm/mach-at91/board-sam9rlek.c         |   4 +-
 arch/arm/mach-at91/board.h                  |   4 +-
 arch/avr32/boards/atngw100/evklcd10x.c      |   6 +-
 arch/avr32/boards/atngw100/mrmt.c           |   4 +-
 arch/avr32/boards/atstk1000/atstk1000.h     |   2 +-
 arch/avr32/boards/atstk1000/setup.c         |   2 +-
 arch/avr32/boards/favr-32/setup.c           |   2 +-
 arch/avr32/boards/hammerhead/setup.c        |   2 +-
 arch/avr32/boards/merisc/display.c          |   2 +-
 arch/avr32/boards/mimc200/setup.c           |   4 +-
 arch/avr32/mach-at32ap/at32ap700x.c         |   8 +--
 arch/avr32/mach-at32ap/include/mach/board.h |   4 +-
 drivers/video/atmel_lcdfb.c                 | 105 ++++++++++++++++++----------
 include/video/atmel_lcdc.h                  |  23 +-----
 21 files changed, 109 insertions(+), 101 deletions(-)

(limited to 'include')

diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 629ea5fc95cf..b2a34740146a 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -465,7 +465,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -498,7 +498,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data) {
 		return;
@@ -559,7 +559,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 858c8aac2daf..4aeadddbc181 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -832,7 +832,7 @@ void __init at91_add_device_can(struct at91_can_data *data) {}
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -859,7 +859,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data)
 		return;
@@ -891,7 +891,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index acb703e13331..cb36fa872d30 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -965,7 +965,7 @@ void __init at91_add_device_isi(struct isi_platform_data *data,
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -991,7 +991,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data)
 		return;
@@ -1037,7 +1037,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 352468f265a9..a698bdab2cce 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -498,7 +498,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -525,7 +525,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data) {
 		return;
@@ -557,7 +557,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d3437624ca4e..4ab1ba7557e4 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -401,7 +401,7 @@ static void at91_lcdc_stn_power_control(int on)
 	}
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.default_bpp			= 1,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9261_DEFAULT_STN_LCDCON2,
@@ -453,7 +453,7 @@ static void at91_lcdc_tft_power_control(int on)
 		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -465,7 +465,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 #endif
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3284df05df14..0fdae3f1541d 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -281,7 +281,7 @@ static void at91_lcdc_power_control(int on)
 }
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -292,7 +292,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 2a94896a1375..ef39078c8ce2 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -284,7 +284,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 32,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -295,7 +295,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index aa265dcf2128..b77d7a9febd8 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -179,7 +179,7 @@ static void at91_lcdc_power_control(int on)
 }
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -191,7 +191,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
index 4a234fb2ab3b..6c08b341167d 100644
--- a/arch/arm/mach-at91/board.h
+++ b/arch/arm/mach-at91/board.h
@@ -107,8 +107,8 @@ extern void __init at91_add_device_pwm(u32 mask);
 extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
 
  /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+struct atmel_lcdfb_pdata;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data);
 
  /* AC97 */
 extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
index 20388750d564..dc4280413e9d 100644
--- a/arch/avr32/boards/atngw100/evklcd10x.c
+++ b/arch/avr32/boards/atngw100/evklcd10x.c
@@ -58,7 +58,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
 	.dclkmax		= 28330000,
 };
 
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -96,7 +96,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
 	.dclkmax		= 7000000,
 };
 
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -134,7 +134,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
 	.dclkmax		= 6400000,
 };
 
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
index 7de083d19b7e..1ba09e4c02b1 100644
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -83,7 +83,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
 	.dclkmax		= 9260000,
 };
 
-static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
 	.default_bpp		= 24,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -126,7 +126,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
 	.dclkmax		= 9260000,
 };
 
-static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
 	.default_bpp		= 24,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
index 9392d3252865..653cc09e536c 100644
--- a/arch/avr32/boards/atstk1000/atstk1000.h
+++ b/arch/avr32/boards/atstk1000/atstk1000.h
@@ -10,7 +10,7 @@
 #ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
 #define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
 
-extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+extern struct atmel_lcdfb_pdata atstk1000_lcdc_data;
 
 void atstk1000_setup_j2_leds(void);
 
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 2d6b560115d9..b6b88f5e0b43 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -55,7 +55,7 @@ static struct fb_monspecs __initdata atstk1000_default_monspecs = {
 	.dclkmax		= 30000000,
 };
 
-struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata atstk1000_lcdc_data = {
 	.default_bpp		= 24,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 27bd6fbe21cb..7b1f2cd85400 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -125,7 +125,7 @@ static struct fb_monspecs __initdata favr32_default_monspecs = {
 	.dclkmax		= 28000000,
 };
 
-struct atmel_lcdfb_info __initdata favr32_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata favr32_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
index 9d1efd1cd425..dc0e317f2ecd 100644
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -77,7 +77,7 @@ static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = {
 	.dclkmax		= 10000000,
 };
 
-struct atmel_lcdfb_info __initdata hammerhead_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata hammerhead_lcdc_data = {
 	.default_bpp		= 24,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/merisc/display.c b/arch/avr32/boards/merisc/display.c
index 85a543cd4abc..e7683ee7ed40 100644
--- a/arch/avr32/boards/merisc/display.c
+++ b/arch/avr32/boards/merisc/display.c
@@ -45,7 +45,7 @@ static struct fb_monspecs merisc_fb_monspecs = {
 	.dclkmax	= 30000000,
 };
 
-struct atmel_lcdfb_info merisc_lcdc_data = {
+struct atmel_lcdfb_pdata merisc_lcdc_data = {
 	.default_bpp		= 24,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index 05358aa5ef7d..1cb8e9cc5cfa 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-extern struct atmel_lcdfb_info mimc200_lcdc_data;
+extern struct atmel_lcdfb_pdata mimc200_lcdc_data;
 
 #include <linux/clk.h>
 #include <linux/etherdevice.h>
@@ -71,7 +71,7 @@ static struct fb_monspecs __initdata mimc200_default_monspecs = {
 	.dclkmax		= 25200000,
 };
 
-struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata mimc200_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index a68f3cf7c3c1..a1f4d1e91b52 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1439,7 +1439,7 @@ fail:
  *  LCDC
  * -------------------------------------------------------------------- */
 #if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
-static struct atmel_lcdfb_info atmel_lcdfb0_data;
+static struct atmel_lcdfb_pdata atmel_lcdfb0_data;
 static struct resource atmel_lcdfb0_resource[] = {
 	{
 		.start		= 0xff000000,
@@ -1467,12 +1467,12 @@ static struct clk atmel_lcdfb0_pixclk = {
 };
 
 struct platform_device *__init
-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_pdata *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len,
 		     u64 pin_mask)
 {
 	struct platform_device *pdev;
-	struct atmel_lcdfb_info *info;
+	struct atmel_lcdfb_pdata *info;
 	struct fb_monspecs *monspecs;
 	struct fb_videomode *modedb;
 	unsigned int modedb_size;
@@ -1529,7 +1529,7 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 	}
 
 	info = pdev->dev.platform_data;
-	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+	memcpy(info, data, sizeof(struct atmel_lcdfb_pdata));
 	info->default_monspecs = monspecs;
 
 	pdev->name = "at32ap-lcdfb";
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index d485b0391357..f1a316d52c73 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -44,9 +44,9 @@ struct platform_device *
 at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
 void at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n);
 
-struct atmel_lcdfb_info;
+struct atmel_lcdfb_pdata;
 struct platform_device *
-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_pdata *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len,
 		     u64 pin_mask);
 
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 3f7d6dc3408d..0d7214df1237 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -20,12 +20,44 @@
 #include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/platform_data/atmel.h>
+#include <video/of_display_timing.h>
 
 #include <mach/cpu.h>
 #include <asm/gpio.h>
 
 #include <video/atmel_lcdc.h>
 
+struct atmel_lcdfb_config {
+	bool have_alt_pixclock;
+	bool have_hozval;
+	bool have_intensity_bit;
+};
+
+ /* LCD Controller info data structure, stored in device platform_data */
+struct atmel_lcdfb_info {
+	spinlock_t		lock;
+	struct fb_info		*info;
+	void __iomem		*mmio;
+	int			irq_base;
+	struct work_struct	task;
+
+	unsigned int		smem_len;
+	struct platform_device	*pdev;
+	struct clk		*bus_clk;
+	struct clk		*lcdc_clk;
+
+	struct backlight_device	*backlight;
+	u8			bl_power;
+	u8			saved_lcdcon;
+
+	u32			pseudo_palette[16];
+	bool			have_intensity_bit;
+
+	struct atmel_lcdfb_pdata pdata;
+
+	struct atmel_lcdfb_config *config;
+};
+
 #define lcdc_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
 #define lcdc_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
 
@@ -34,12 +66,6 @@
 #define ATMEL_LCDC_DMA_BURST_LEN	8	/* words */
 #define ATMEL_LCDC_FIFO_SIZE		512	/* words */
 
-struct atmel_lcdfb_config {
-	bool have_alt_pixclock;
-	bool have_hozval;
-	bool have_intensity_bit;
-};
-
 static struct atmel_lcdfb_config at91sam9261_config = {
 	.have_hozval		= true,
 	.have_intensity_bit	= true,
@@ -248,15 +274,17 @@ static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 
 static void init_contrast(struct atmel_lcdfb_info *sinfo)
 {
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
 	/* contrast pwm can be 'inverted' */
-	if (sinfo->lcdcon_pol_negative)
+	if (pdata->lcdcon_pol_negative)
 			contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
 
 	/* have some default contrast/backlight settings */
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 
-	if (sinfo->lcdcon_is_backlight)
+	if (pdata->lcdcon_is_backlight)
 		init_backlight(sinfo);
 }
 
@@ -299,9 +327,11 @@ static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo,
 
 static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
 {
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
 	/* Turn off the LCD controller and the DMA controller */
 	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-			sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+			pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
 
 	/* Wait for the LCDC core to become idle */
 	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
@@ -321,9 +351,11 @@ static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
 
 static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
 {
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, pdata->default_dmacon);
 	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+		(pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
 		| ATMEL_LCDC_PWR);
 }
 
@@ -424,6 +456,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 {
 	struct device *dev = info->device;
 	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
 	unsigned long clk_value_khz;
 
 	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
@@ -510,7 +543,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 		else
 			var->green.length = 6;
 
-		if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+		if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 			/* RGB:5X5 mode */
 			var->red.offset = var->green.length + 5;
 			var->blue.offset = 0;
@@ -527,7 +560,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 		var->transp.length = 8;
 		/* fall through */
 	case 24:
-		if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+		if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 			/* RGB:888 mode */
 			var->red.offset = 16;
 			var->blue.offset = 0;
@@ -576,6 +609,7 @@ static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
 static int atmel_lcdfb_set_par(struct fb_info *info)
 {
 	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
 	unsigned long hozval_linesz;
 	unsigned long value;
 	unsigned long clk_value_khz;
@@ -637,7 +671,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 
 
 	/* Initialize control register 2 */
-	value = sinfo->default_lcdcon2;
+	value = pdata->default_lcdcon2;
 
 	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 		value |= ATMEL_LCDC_INVLINE_INVERTED;
@@ -741,6 +775,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 			     unsigned int transp, struct fb_info *info)
 {
 	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
 	unsigned int val;
 	u32 *pal;
 	int ret = 1;
@@ -777,8 +812,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 				 */
 			} else {
 				/* new style BGR:565 / RGB:565 */
-				if (sinfo->lcd_wiring_mode ==
-				    ATMEL_LCDC_WIRING_RGB) {
+				if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 					val  = ((blue >> 11) & 0x001f);
 					val |= ((red  >>  0) & 0xf800);
 				} else {
@@ -918,7 +952,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct fb_info *info;
 	struct atmel_lcdfb_info *sinfo;
-	struct atmel_lcdfb_info *pdata_sinfo;
+	struct atmel_lcdfb_pdata *pdata;
 	struct fb_videomode fbmode;
 	struct resource *regs = NULL;
 	struct resource *map = NULL;
@@ -936,17 +970,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	sinfo = info->par;
 
 	if (dev_get_platdata(dev)) {
-		pdata_sinfo = dev_get_platdata(dev);
-		sinfo->default_bpp = pdata_sinfo->default_bpp;
-		sinfo->default_dmacon = pdata_sinfo->default_dmacon;
-		sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
-		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
-		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
-		sinfo->guard_time = pdata_sinfo->guard_time;
-		sinfo->smem_len = pdata_sinfo->smem_len;
-		sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
-		sinfo->lcdcon_pol_negative = pdata_sinfo->lcdcon_pol_negative;
-		sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
+		pdata = dev_get_platdata(dev);
+		sinfo->pdata = *pdata;
 	} else {
 		dev_err(dev, "cannot get default configuration\n");
 		goto free_info;
@@ -962,7 +987,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	info->pseudo_palette = sinfo->pseudo_palette;
 	info->fbops = &atmel_lcdfb_ops;
 
-	memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
+	memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs));
 	info->fix = atmel_lcdfb_fix;
 
 	/* Enable LCDC Clocks */
@@ -980,7 +1005,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 
 	ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
 			info->monspecs.modedb_len, info->monspecs.modedb,
-			sinfo->default_bpp);
+			pdata->default_bpp);
 	if (!ret) {
 		dev_err(dev, "no suitable video mode found\n");
 		goto stop_clk;
@@ -1097,8 +1122,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	fb_add_videomode(&fbmode, &info->modelist);
 
 	/* Power up the LCDC screen */
-	if (sinfo->atmel_lcdfb_power_control)
-		sinfo->atmel_lcdfb_power_control(1);
+	if (pdata->atmel_lcdfb_power_control)
+		pdata->atmel_lcdfb_power_control(1);
 
 	dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
 		       info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
@@ -1141,15 +1166,17 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct atmel_lcdfb_info *sinfo;
+	struct atmel_lcdfb_pdata *pdata;
 
 	if (!info || !info->par)
 		return 0;
 	sinfo = info->par;
+	pdata = &sinfo->pdata;
 
 	cancel_work_sync(&sinfo->task);
 	exit_backlight(sinfo);
-	if (sinfo->atmel_lcdfb_power_control)
-		sinfo->atmel_lcdfb_power_control(0);
+	if (pdata->atmel_lcdfb_power_control)
+		pdata->atmel_lcdfb_power_control(0);
 	unregister_framebuffer(info);
 	atmel_lcdfb_stop_clock(sinfo);
 	clk_put(sinfo->lcdc_clk);
@@ -1176,6 +1203,7 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
 
 	/*
 	 * We don't want to handle interrupts while the clock is
@@ -1185,8 +1213,8 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
 
 	sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
-	if (sinfo->atmel_lcdfb_power_control)
-		sinfo->atmel_lcdfb_power_control(0);
+	if (pdata->atmel_lcdfb_power_control)
+		pdata->atmel_lcdfb_power_control(0);
 
 	atmel_lcdfb_stop(sinfo);
 	atmel_lcdfb_stop_clock(sinfo);
@@ -1198,11 +1226,12 @@ static int atmel_lcdfb_resume(struct platform_device *pdev)
 {
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
 
 	atmel_lcdfb_start_clock(sinfo);
 	atmel_lcdfb_start(sinfo);
-	if (sinfo->atmel_lcdfb_power_control)
-		sinfo->atmel_lcdfb_power_control(1);
+	if (pdata->atmel_lcdfb_power_control)
+		pdata->atmel_lcdfb_power_control(1);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
 
 	/* Enable FIFO & DMA errors */
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 0f5a2fc69af9..f197c54712b0 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -31,39 +31,18 @@
 #define ATMEL_LCDC_WIRING_BGR	0
 #define ATMEL_LCDC_WIRING_RGB	1
 
-struct atmel_lcdfb_config;
 
  /* LCD Controller info data structure, stored in device platform_data */
-struct atmel_lcdfb_info {
-	spinlock_t		lock;
-	struct fb_info		*info;
-	void __iomem		*mmio;
-	int			irq_base;
-	struct work_struct	task;
-
+struct atmel_lcdfb_pdata {
 	unsigned int		guard_time;
-	unsigned int 		smem_len;
-	struct platform_device	*pdev;
-	struct clk		*bus_clk;
-	struct clk		*lcdc_clk;
-
-#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
-	struct backlight_device	*backlight;
-	u8			bl_power;
-#endif
 	bool			lcdcon_is_backlight;
 	bool			lcdcon_pol_negative;
-	u8			saved_lcdcon;
-
 	u8			default_bpp;
 	u8			lcd_wiring_mode;
 	unsigned int		default_lcdcon2;
 	unsigned int		default_dmacon;
 	void (*atmel_lcdfb_power_control)(int on);
 	struct fb_monspecs	*default_monspecs;
-	u32			pseudo_palette[16];
-
-	struct atmel_lcdfb_config *config;
 };
 
 #define ATMEL_LCDC_DMABADDR1	0x00
-- 
cgit v1.2.3


From ce3b64f5f1ba9126c7f97115c15abe9c322d24e1 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 29 Mar 2013 02:05:47 +0800
Subject: video: atmel_lcdfb: pass the pdata as params

so we can use have list gpio as example (probe via DT)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-at91/board-sam9261ek.c   | 4 ++--
 arch/arm/mach-at91/board-sam9263ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9rlek.c    | 2 +-
 arch/avr32/boards/atngw100/evklcd10x.c | 2 +-
 drivers/video/atmel_lcdfb.c            | 2 +-
 include/video/atmel_lcdc.h             | 4 +++-
 6 files changed, 9 insertions(+), 7 deletions(-)

(limited to 'include')

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 4ab1ba7557e4..473546b9408b 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -389,7 +389,7 @@ static struct fb_monspecs at91fb_default_stn_monspecs = {
 					| ATMEL_LCDC_IFWIDTH_4 \
 					| ATMEL_LCDC_SCANMOD_SINGLE)
 
-static void at91_lcdc_stn_power_control(int on)
+static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	/* backlight */
 	if (on) {	/* power up */
@@ -445,7 +445,7 @@ static struct fb_monspecs at91fb_default_tft_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT    \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_tft_power_control(int on)
+static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	if (on)
 		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 0fdae3f1541d..8b4942cbb6d9 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -275,7 +275,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	at91_set_gpio_value(AT91_PIN_PA30, on);
 }
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b77d7a9febd8..604eecf6cd70 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -170,7 +170,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	if (on)
 		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
index dc4280413e9d..64919b0da7aa 100644
--- a/arch/avr32/boards/atngw100/evklcd10x.c
+++ b/arch/avr32/boards/atngw100/evklcd10x.c
@@ -145,7 +145,7 @@ static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
 };
 #endif
 
-static void atevklcd10x_lcdc_power_control(int on)
+static void atevklcd10x_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	gpio_set_value(GPIO_PIN_PB(15), on);
 }
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 3c7609c1c6fe..790a501538b0 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -293,7 +293,7 @@ static inline void atmel_lcdfb_power_control(struct atmel_lcdfb_info *sinfo, int
 	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
 
 	if (pdata->atmel_lcdfb_power_control)
-		pdata->atmel_lcdfb_power_control(on);
+		pdata->atmel_lcdfb_power_control(pdata, on);
 }
 
 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index f197c54712b0..c79f38131926 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -41,8 +41,10 @@ struct atmel_lcdfb_pdata {
 	u8			lcd_wiring_mode;
 	unsigned int		default_lcdcon2;
 	unsigned int		default_dmacon;
-	void (*atmel_lcdfb_power_control)(int on);
+	void (*atmel_lcdfb_power_control)(struct atmel_lcdfb_pdata *pdata, int on);
 	struct fb_monspecs	*default_monspecs;
+
+	struct list_head	pwr_gpios;
 };
 
 #define ATMEL_LCDC_DMABADDR1	0x00
-- 
cgit v1.2.3


From f51a07d05c5142e73f781d878f411d63d3548a49 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 19 Sep 2013 18:35:54 -0700
Subject: framebuffer: Add fb_<level> convenience logging macros

Add fb_<level> convenience macros for emitting the
"fb%d: ", struct fb_info->node value.

Neatens and shortens the code a bit.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 include/linux/fb.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'include')

diff --git a/include/linux/fb.h b/include/linux/fb.h
index ffac70aab3e9..70c4836e4a9f 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -792,4 +792,16 @@ extern int fb_find_mode(struct fb_var_screeninfo *var,
 			const struct fb_videomode *default_mode,
 			unsigned int default_bpp);
 
+/* Convenience logging macros */
+#define fb_err(fb_info, fmt, ...)					\
+	pr_err("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_notice(info, fmt, ...)					\
+	pr_notice("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_warn(fb_info, fmt, ...)					\
+	pr_warn("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_info(fb_info, fmt, ...)					\
+	pr_info("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_dbg(fb_info, fmt, ...)					\
+	pr_debug("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+
 #endif /* _LINUX_FB_H */
-- 
cgit v1.2.3


From 8623ec220b9c9d873ef82d41c9adbac7eec53174 Mon Sep 17 00:00:00 2001
From: Marek Belisko <marek@goldelico.com>
Date: Tue, 29 Oct 2013 23:25:40 +0100
Subject: omapdss: Add new panel driver for Topolly td028ttec1 LCD.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[tomi.valkeinen@ti.com: made a few funcs static]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays-new/Kconfig           |   6 +
 drivers/video/omap2/displays-new/Makefile          |   1 +
 .../omap2/displays-new/panel-tpo-td028ttec1.c      | 480 +++++++++++++++++++++
 include/video/omap-panel-data.h                    |  13 +
 4 files changed, 500 insertions(+)
 create mode 100644 drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c

(limited to 'include')

diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 6c90885b0940..1054249b16a5 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -56,6 +56,12 @@ config DISPLAY_PANEL_SHARP_LS037V7DW01
         help
           LCD Panel used in TI's SDP3430 and EVM boards
 
+config DISPLAY_PANEL_TPO_TD028TTEC1
+        tristate "TPO TD028TTEC1 LCD Panel"
+        depends on SPI
+        help
+          LCD panel used in Openmoko.
+
 config DISPLAY_PANEL_TPO_TD043MTEA1
         tristate "TPO TD043MTEA1 LCD Panel"
         depends on SPI
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index 5aeb11b8fcd5..0323a8a1c682 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
 obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
 obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+obj-$(CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DISPLAY_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
new file mode 100644
index 000000000000..9a08908fe998
--- /dev/null
+++ b/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -0,0 +1,480 @@
+/*
+ * Toppoly TD028TTEC1 panel support
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Neo 1973 code (jbt6k74.c):
+ * Copyright (C) 2006-2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * Ported and adapted from Neo 1973 U-Boot by:
+ * H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	struct spi_device *spi_dev;
+};
+
+static struct omap_video_timings td028ttec1_panel_timings = {
+	.x_res		= 480,
+	.y_res		= 640,
+	.pixel_clock	= 22153,
+	.hfp		= 24,
+	.hsw		= 8,
+	.hbp		= 8,
+	.vfp		= 4,
+	.vsw		= 2,
+	.vbp		= 2,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+#define JBT_COMMAND	0x000
+#define JBT_DATA	0x100
+
+static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
+{
+	int rc;
+	u16 tx_buf = JBT_COMMAND | reg;
+
+	rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
+			1*sizeof(u16));
+	if (rc != 0)
+		dev_err(&ddata->spi_dev->dev,
+			"jbt_ret_write_0 spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
+{
+	int rc;
+	u16 tx_buf[2];
+
+	tx_buf[0] = JBT_COMMAND | reg;
+	tx_buf[1] = JBT_DATA | data;
+	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
+			2*sizeof(u16));
+	if (rc != 0)
+		dev_err(&ddata->spi_dev->dev,
+			"jbt_reg_write_1 spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
+{
+	int rc;
+	u16 tx_buf[3];
+
+	tx_buf[0] = JBT_COMMAND | reg;
+	tx_buf[1] = JBT_DATA | (data >> 8);
+	tx_buf[2] = JBT_DATA | (data & 0xff);
+
+	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
+			3*sizeof(u16));
+
+	if (rc != 0)
+		dev_err(&ddata->spi_dev->dev,
+			"jbt_reg_write_2 spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+enum jbt_register {
+	JBT_REG_SLEEP_IN		= 0x10,
+	JBT_REG_SLEEP_OUT		= 0x11,
+
+	JBT_REG_DISPLAY_OFF		= 0x28,
+	JBT_REG_DISPLAY_ON		= 0x29,
+
+	JBT_REG_RGB_FORMAT		= 0x3a,
+	JBT_REG_QUAD_RATE		= 0x3b,
+
+	JBT_REG_POWER_ON_OFF		= 0xb0,
+	JBT_REG_BOOSTER_OP		= 0xb1,
+	JBT_REG_BOOSTER_MODE		= 0xb2,
+	JBT_REG_BOOSTER_FREQ		= 0xb3,
+	JBT_REG_OPAMP_SYSCLK		= 0xb4,
+	JBT_REG_VSC_VOLTAGE		= 0xb5,
+	JBT_REG_VCOM_VOLTAGE		= 0xb6,
+	JBT_REG_EXT_DISPL		= 0xb7,
+	JBT_REG_OUTPUT_CONTROL		= 0xb8,
+	JBT_REG_DCCLK_DCEV		= 0xb9,
+	JBT_REG_DISPLAY_MODE1		= 0xba,
+	JBT_REG_DISPLAY_MODE2		= 0xbb,
+	JBT_REG_DISPLAY_MODE		= 0xbc,
+	JBT_REG_ASW_SLEW		= 0xbd,
+	JBT_REG_DUMMY_DISPLAY		= 0xbe,
+	JBT_REG_DRIVE_SYSTEM		= 0xbf,
+
+	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
+	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
+	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
+	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
+	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
+	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
+	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
+
+	JBT_REG_GAMMA1_FINE_1		= 0xc7,
+	JBT_REG_GAMMA1_FINE_2		= 0xc8,
+	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
+	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
+
+	JBT_REG_BLANK_CONTROL		= 0xcf,
+	JBT_REG_BLANK_TH_TV		= 0xd0,
+	JBT_REG_CKV_ON_OFF		= 0xd1,
+	JBT_REG_CKV_1_2			= 0xd2,
+	JBT_REG_OEV_TIMING		= 0xd3,
+	JBT_REG_ASW_TIMING_1		= 0xd4,
+	JBT_REG_ASW_TIMING_2		= 0xd5,
+
+	JBT_REG_HCLOCK_VGA		= 0xec,
+	JBT_REG_HCLOCK_QVGA		= 0xed,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int td028ttec1_panel_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
+		dssdev->state);
+
+	/* three times command zero */
+	r |= jbt_ret_write_0(ddata, 0x00);
+	usleep_range(1000, 2000);
+	r |= jbt_ret_write_0(ddata, 0x00);
+	usleep_range(1000, 2000);
+	r |= jbt_ret_write_0(ddata, 0x00);
+	usleep_range(1000, 2000);
+
+	if (r) {
+		dev_warn(dssdev->dev, "transfer error\n");
+		goto transfer_err;
+	}
+
+	/* deep standby out */
+	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
+
+	/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
+	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
+
+	/* Quad mode off */
+	r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
+
+	/* AVDD on, XVDD on */
+	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
+
+	/* Output control */
+	r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
+
+	/* Sleep mode off */
+	r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
+
+	/* at this point we have like 50% grey */
+
+	/* initialize register set */
+	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
+	r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
+	r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
+	r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
+	r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
+	/*
+	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+	 * to avoid red / blue flicker
+	 */
+	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
+
+	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
+
+	r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
+	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
+	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
+	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
+
+	r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
+	r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
+
+	r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
+	r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
+
+	r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
+	r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
+	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
+
+	r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+transfer_err:
+
+	return r ? -EIO : 0;
+}
+
+static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
+
+	jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
+	jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
+	jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
+	jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver td028ttec1_ops = {
+	.connect	= td028ttec1_panel_connect,
+	.disconnect	= td028ttec1_panel_disconnect,
+
+	.enable		= td028ttec1_panel_enable,
+	.disable	= td028ttec1_panel_disable,
+
+	.set_timings	= td028ttec1_panel_set_timings,
+	.get_timings	= td028ttec1_panel_get_timings,
+	.check_timings	= td028ttec1_panel_check_timings,
+};
+
+static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_tpo_td028ttec1_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int td028ttec1_panel_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->bits_per_word = 9;
+	spi->mode = SPI_MODE_3;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi_dev = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = td028ttec1_panel_probe_pdata(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->videomode = td028ttec1_panel_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &td028ttec1_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int td028ttec1_panel_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	td028ttec1_panel_disable(dssdev);
+	td028ttec1_panel_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct spi_driver td028ttec1_spi_driver = {
+	.probe		= td028ttec1_panel_probe,
+	.remove		= td028ttec1_panel_remove,
+
+	.driver         = {
+		.name   = "panel-tpo-td028ttec1",
+		.owner  = THIS_MODULE,
+	},
+};
+
+module_spi_driver(td028ttec1_spi_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
+MODULE_LICENSE("GPL");
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index f7ac8d972af0..69279c013ac4 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -238,4 +238,17 @@ struct panel_nec_nl8048hl11_platform_data {
 	int qvga_gpio;
 };
 
+/**
+ * panel-tpo-td028ttec1 platform data
+ * @name: name for display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ */
+struct panel_tpo_td028ttec1_platform_data {
+	const char *name;
+	const char *source;
+
+	int data_lines;
+};
+
 #endif /* __OMAP_PANEL_DATA_H */
-- 
cgit v1.2.3