From 0bcd952feec7042d9a5383b639c8edc943402add Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 8 Nov 2018 14:55:32 -0800 Subject: ethernet/intel: consolidate NAPI and NAPI exit While reviewing code, I noticed that Eric Dumazet recommends that drivers check the return code of napi_complete_done, and use that to decide to enable interrupts or not when exiting poll. One of the Intel drivers was already fixed (ixgbe). Upon looking at the Intel drivers as a whole, we are handling our polling and NAPI exit in a few different ways based on whether we have multiqueue and whether we have Tx cleanup included. Several drivers had the bug of exiting NAPI with return 0, which appears to mess up the accounting in the stack. Consolidate all the NAPI routines to do best known way of exiting and to just mostly look like each other. 1) check return code of napi_complete_done to control interrupt enable 2) return the actual amount of work done. 3) return budget immediately if need NAPI poll again Tested the changes on e1000e with a high interrupt rate set, and it shows about an 8% reduction in the CPU utilization when busy polling because we aren't re-enabling interrupts when we're about to be polled. Signed-off-by: Jesse Brandeburg Tested-by: Andrew Bowers Reviewed-by: Jacob Keller Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e100.c | 10 ++++++---- drivers/net/ethernet/intel/e1000/e1000_main.c | 11 ++++++----- drivers/net/ethernet/intel/e1000e/netdev.c | 17 +++++++++-------- drivers/net/ethernet/intel/fm10k/fm10k_main.c | 10 +++++----- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 9 +++++---- drivers/net/ethernet/intel/iavf/iavf_txrx.c | 9 +++++---- drivers/net/ethernet/intel/ice/ice_txrx.c | 10 ++++++---- drivers/net/ethernet/intel/igb/igb_main.c | 10 ++++++---- drivers/net/ethernet/intel/igbvf/netdev.c | 9 ++++++--- drivers/net/ethernet/intel/igc/igc_main.c | 10 ++++++---- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 22 +++++++++++++--------- 11 files changed, 73 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 7c4b55482f72..5e5c57db0d3f 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2225,11 +2225,13 @@ static int e100_poll(struct napi_struct *napi, int budget) e100_rx_clean(nic, &work_done, budget); e100_tx_clean(nic); - /* If budget not fully consumed, exit the polling mode */ - if (work_done < budget) { - napi_complete_done(napi, work_done); + /* If budget fully consumed, continue polling */ + if (work_done == budget) + return budget; + + /* only re-enable interrupt if stack agrees polling is really done */ + if (likely(napi_complete_done(napi, work_done))) e100_enable_irq(nic); - } return work_done; } diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 43b6d3cec3b3..8fe9af0e2ab7 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -3803,14 +3803,15 @@ static int e1000_clean(struct napi_struct *napi, int budget) adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget); - if (!tx_clean_complete) - work_done = budget; + if (!tx_clean_complete || work_done == budget) + return budget; - /* If budget not fully consumed, exit the polling mode */ - if (work_done < budget) { + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) { if (likely(adapter->itr_setting & 3)) e1000_set_itr(adapter); - napi_complete_done(napi, work_done); if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_enable(adapter); } diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 59bd587d809d..308c006cb41d 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2651,9 +2651,9 @@ err: /** * e1000e_poll - NAPI Rx polling callback * @napi: struct associated with this polling callback - * @weight: number of packets driver is allowed to process this poll + * @budget: number of packets driver is allowed to process this poll **/ -static int e1000e_poll(struct napi_struct *napi, int weight) +static int e1000e_poll(struct napi_struct *napi, int budget) { struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); @@ -2667,16 +2667,17 @@ static int e1000e_poll(struct napi_struct *napi, int weight) (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring); - adapter->clean_rx(adapter->rx_ring, &work_done, weight); + adapter->clean_rx(adapter->rx_ring, &work_done, budget); - if (!tx_cleaned) - work_done = weight; + if (!tx_cleaned || work_done == budget) + return budget; - /* If weight not fully consumed, exit the polling mode */ - if (work_done < weight) { + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) { if (adapter->itr_setting & 3) e1000_set_itr(adapter); - napi_complete_done(napi, work_done); if (!test_bit(__E1000_DOWN, &adapter->state)) { if (adapter->msix_entries) ew32(IMS, adapter->rx_ring->ims_val); diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c index 5b2a50e5798f..6fd15a734324 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c @@ -1465,11 +1465,11 @@ static int fm10k_poll(struct napi_struct *napi, int budget) if (!clean_complete) return budget; - /* all work done, exit the polling mode */ - napi_complete_done(napi, work_done); - - /* re-enable the q_vector */ - fm10k_qv_enable(q_vector); + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + fm10k_qv_enable(q_vector); return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index c4d44096cdaf..a0b1575468fc 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2667,10 +2667,11 @@ tx_only: if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR) q_vector->arm_wb_state = false; - /* Work is done so exit the polling mode and re-enable the interrupt */ - napi_complete_done(napi, work_done); - - i40e_update_enable_itr(vsi, q_vector); + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + i40e_update_enable_itr(vsi, q_vector); return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c index 3b1dc77ae368..9b4d7cec2e18 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c +++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c @@ -1761,10 +1761,11 @@ tx_only: if (vsi->back->flags & IAVF_TXR_FLAGS_WB_ON_ITR) q_vector->arm_wb_state = false; - /* Work is done so exit the polling mode and re-enable the interrupt */ - napi_complete_done(napi, work_done); - - iavf_update_enable_itr(vsi, q_vector); + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + iavf_update_enable_itr(vsi, q_vector); return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index 4b92863b3500..49fc38094185 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -1103,10 +1103,12 @@ int ice_napi_poll(struct napi_struct *napi, int budget) if (!clean_complete) return budget; - /* Work is done so exit the polling mode and re-enable the interrupt */ - napi_complete_done(napi, work_done); - if (test_bit(ICE_FLAG_MSIX_ENA, pf->flags)) - ice_irq_dynamic_ena(&vsi->back->hw, vsi, q_vector); + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + if (test_bit(ICE_FLAG_MSIX_ENA, pf->flags)) + ice_irq_dynamic_ena(&vsi->back->hw, vsi, q_vector); return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 4331ea71b86e..453ae1d9e5f3 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -7752,11 +7752,13 @@ static int igb_poll(struct napi_struct *napi, int budget) if (!clean_complete) return budget; - /* If not enough Rx work done, exit the polling mode */ - napi_complete_done(napi, work_done); - igb_ring_irq_enable(q_vector); + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + igb_ring_irq_enable(q_vector); - return 0; + return min(work_done, budget - 1); } /** diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 820d49eb41ab..4eab83faec62 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -1186,10 +1186,13 @@ static int igbvf_poll(struct napi_struct *napi, int budget) igbvf_clean_rx_irq(adapter, &work_done, budget); - /* If not enough Rx work done, exit the polling mode */ - if (work_done < budget) { - napi_complete_done(napi, work_done); + if (work_done == budget) + return budget; + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) { if (adapter->requested_itr & 3) igbvf_set_itr(adapter); diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index d002055c0623..28ffe98f8921 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -2852,11 +2852,13 @@ static int igc_poll(struct napi_struct *napi, int budget) if (!clean_complete) return budget; - /* If not enough Rx work done, exit the polling mode */ - napi_complete_done(napi, work_done); - igc_ring_irq_enable(q_vector); + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + igc_ring_irq_enable(q_vector); - return 0; + return min(work_done, budget - 1); } /** diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 196b890467b2..2de81f046fb5 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -1293,16 +1293,20 @@ static int ixgbevf_poll(struct napi_struct *napi, int budget) /* If all work not completed, return budget and keep polling */ if (!clean_complete) return budget; - /* all work done, exit the polling mode */ - napi_complete_done(napi, work_done); - if (adapter->rx_itr_setting == 1) - ixgbevf_set_itr(q_vector); - if (!test_bit(__IXGBEVF_DOWN, &adapter->state) && - !test_bit(__IXGBEVF_REMOVING, &adapter->state)) - ixgbevf_irq_enable_queues(adapter, - BIT(q_vector->v_idx)); - return 0; + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) { + if (adapter->rx_itr_setting == 1) + ixgbevf_set_itr(q_vector); + if (!test_bit(__IXGBEVF_DOWN, &adapter->state) && + !test_bit(__IXGBEVF_REMOVING, &adapter->state)) + ixgbevf_irq_enable_queues(adapter, + BIT(q_vector->v_idx)); + } + + return min(work_done, budget - 1); } /** -- cgit v1.2.3