From bb4eecf23be259929f9e7d173890a83ae5f87d4c Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Mon, 25 Jul 2016 16:48:39 +0800 Subject: mmc: Change the max discard sectors and erase response when HW busy detect When mmc host HW supports busy signalling (using R1B as response), don't use the host->max_busy_timeout as the limitation when deciding the max discard sectors, which we inform the generic BLOCK layer about. Instead, let's use at least one preferred erase size as the max discard sectors. In cases when the host controller supports HW busy signalling and the timeout for the erase operation doesn't exceed the max_busy_timeout, we keep the R1B response, otherwise we prevent the host from doing HW busy detection by converting to a R1 response. Signed-off-by: Baolin Wang Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 60 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 50 insertions(+), 10 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 94cbf4e170e3..e55cde6d436d 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2067,7 +2067,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, unsigned int to, unsigned int arg) { struct mmc_command cmd = {0}; - unsigned int qty = 0; + unsigned int qty = 0, busy_timeout = 0; + bool use_r1b_resp = false; unsigned long timeout; int err; @@ -2135,8 +2136,22 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_ERASE; cmd.arg = arg; - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - cmd.busy_timeout = mmc_erase_timeout(card, arg, qty); + busy_timeout = mmc_erase_timeout(card, arg, qty); + /* + * If the host controller supports busy signalling and the timeout for + * the erase operation does not exceed the max_busy_timeout, we should + * use R1B response. Or we need to prevent the host from doing hw busy + * detection, which is done by converting to a R1 response instead. + */ + if (card->host->max_busy_timeout && + busy_timeout > card->host->max_busy_timeout) { + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = busy_timeout; + use_r1b_resp = true; + } + err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) { pr_err("mmc_erase: erase error %d, status %#x\n", @@ -2148,7 +2163,14 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, if (mmc_host_is_spi(card->host)) goto out; - timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS); + /* + * In case of when R1B + MMC_CAP_WAIT_WHILE_BUSY is used, the polling + * shall be avoided. + */ + if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) + goto out; + + timeout = jiffies + msecs_to_jiffies(busy_timeout); do { memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; @@ -2328,23 +2350,41 @@ static unsigned int mmc_do_calc_max_discard(struct mmc_card *card, unsigned int arg) { struct mmc_host *host = card->host; - unsigned int max_discard, x, y, qty = 0, max_qty, timeout; + unsigned int max_discard, x, y, qty = 0, max_qty, min_qty, timeout; unsigned int last_timeout = 0; - if (card->erase_shift) + if (card->erase_shift) { max_qty = UINT_MAX >> card->erase_shift; - else if (mmc_card_sd(card)) + min_qty = card->pref_erase >> card->erase_shift; + } else if (mmc_card_sd(card)) { max_qty = UINT_MAX; - else + min_qty = card->pref_erase; + } else { max_qty = UINT_MAX / card->erase_size; + min_qty = card->pref_erase / card->erase_size; + } - /* Find the largest qty with an OK timeout */ + /* + * We should not only use 'host->max_busy_timeout' as the limitation + * when deciding the max discard sectors. We should set a balance value + * to improve the erase speed, and it can not get too long timeout at + * the same time. + * + * Here we set 'card->pref_erase' as the minimal discard sectors no + * matter what size of 'host->max_busy_timeout', but if the + * 'host->max_busy_timeout' is large enough for more discard sectors, + * then we can continue to increase the max discard sectors until we + * get a balance value. + */ do { y = 0; for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) { timeout = mmc_erase_timeout(card, arg, qty + x); - if (timeout > host->max_busy_timeout) + + if (qty + x > min_qty && + timeout > host->max_busy_timeout) break; + if (timeout < last_timeout) break; last_timeout = timeout; -- cgit v1.2.3