From d391c58271072d0b0fad93c82018d495b2633448 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 25 Jun 2021 15:09:46 +0200 Subject: drivers/firmware: move x86 Generic System Framebuffers support The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by: Javier Martinez Canillas Acked-by: Borislav Petkov Acked-by: Greg Kroah-Hartman Acked-by: Daniel Vetter Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com --- drivers/firmware/sysfb_simplefb.c | 111 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 drivers/firmware/sysfb_simplefb.c (limited to 'drivers/firmware/sysfb_simplefb.c') diff --git a/drivers/firmware/sysfb_simplefb.c b/drivers/firmware/sysfb_simplefb.c new file mode 100644 index 000000000000..df892444ea17 --- /dev/null +++ b/drivers/firmware/sysfb_simplefb.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Generic System Framebuffers on x86 + * Copyright (c) 2012-2013 David Herrmann + */ + +/* + * simple-framebuffer probing + * Try to convert "screen_info" into a "simple-framebuffer" compatible mode. + * If the mode is incompatible, we return "false" and let the caller create + * legacy nodes instead. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static const char simplefb_resname[] = "BOOTFB"; +static const struct simplefb_format formats[] = SIMPLEFB_FORMATS; + +/* try parsing x86 screen_info into a simple-framebuffer mode struct */ +__init bool parse_mode(const struct screen_info *si, + struct simplefb_platform_data *mode) +{ + const struct simplefb_format *f; + __u8 type; + unsigned int i; + + type = si->orig_video_isVGA; + if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI) + return false; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + f = &formats[i]; + if (si->lfb_depth == f->bits_per_pixel && + si->red_size == f->red.length && + si->red_pos == f->red.offset && + si->green_size == f->green.length && + si->green_pos == f->green.offset && + si->blue_size == f->blue.length && + si->blue_pos == f->blue.offset && + si->rsvd_size == f->transp.length && + si->rsvd_pos == f->transp.offset) { + mode->format = f->name; + mode->width = si->lfb_width; + mode->height = si->lfb_height; + mode->stride = si->lfb_linelength; + return true; + } + } + + return false; +} + +__init int create_simplefb(const struct screen_info *si, + const struct simplefb_platform_data *mode) +{ + struct platform_device *pd; + struct resource res; + u64 base, size; + u32 length; + + /* + * If the 64BIT_BASE capability is set, ext_lfb_base will contain the + * upper half of the base address. Assemble the address, then make sure + * it is valid and we can actually access it. + */ + base = si->lfb_base; + if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE) + base |= (u64)si->ext_lfb_base << 32; + if (!base || (u64)(resource_size_t)base != base) { + printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n"); + return -EINVAL; + } + + /* + * Don't use lfb_size as IORESOURCE size, since it may contain the + * entire VMEM, and thus require huge mappings. Use just the part we + * need, that is, the part where the framebuffer is located. But verify + * that it does not exceed the advertised VMEM. + * Note that in case of VBE, the lfb_size is shifted by 16 bits for + * historical reasons. + */ + size = si->lfb_size; + if (si->orig_video_isVGA == VIDEO_TYPE_VLFB) + size <<= 16; + length = mode->height * mode->stride; + if (length > size) { + printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n"); + return -EINVAL; + } + length = PAGE_ALIGN(length); + + /* setup IORESOURCE_MEM as framebuffer memory */ + memset(&res, 0, sizeof(res)); + res.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + res.name = simplefb_resname; + res.start = base; + res.end = res.start + length - 1; + if (res.end <= res.start) + return -EINVAL; + + pd = platform_device_register_resndata(NULL, "simple-framebuffer", 0, + &res, 1, mode, sizeof(*mode)); + return PTR_ERR_OR_ZERO(pd); +} -- cgit v1.2.3