From 0f6faa3fc909482c2b40161de9bcf0d5460e54c5 Mon Sep 17 00:00:00 2001
From: Soren Brinkmann <soren.brinkmann@xilinx.com>
Date: Fri, 4 Apr 2014 14:27:56 -0700
Subject: ARM: zynq: dt: Add I2C nodes to Zynq device tree

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/boot/dts/zynq-zc706.dts | 68 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

(limited to 'arch/arm/boot/dts/zynq-zc706.dts')

diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 88f62c50382e..4cc9913078cd 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -35,6 +35,74 @@
 	phy-mode = "rgmii";
 };
 
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
 };
-- 
cgit v1.2.3