From 57bd9b8ddd434111918d3f7cb0b4297cd77f1b5b Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 23 Dec 2011 10:36:35 +0530 Subject: ALSA: compress offload API documentation The patch adds the documentation file explaining the API Signed-off-by: Pierre-Louis Bossart Signed-off-by: Vinod Koul Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/compress_offload.txt | 188 ++++++++++++++++++++++++++ 1 file changed, 188 insertions(+) create mode 100644 Documentation/sound/alsa/compress_offload.txt (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt new file mode 100644 index 000000000000..c83a835350f0 --- /dev/null +++ b/Documentation/sound/alsa/compress_offload.txt @@ -0,0 +1,188 @@ + compress_offload.txt + ===================== + Pierre-Louis.Bossart + Vinod Koul + +Overview + +Since its early days, the ALSA API was defined with PCM support or +constant bitrates payloads such as IEC61937 in mind. Arguments and +returned values in frames are the norm, making it a challenge to +extend the existing API to compressed data streams. + +In recent years, audio digital signal processors (DSP) were integrated +in system-on-chip designs, and DSPs are also integrated in audio +codecs. Processing compressed data on such DSPs results in a dramatic +reduction of power consumption compared to host-based +processing. Support for such hardware has not been very good in Linux, +mostly because of a lack of a generic API available in the mainline +kernel. + +Rather than requiring a compability break with an API change of the +ALSA PCM interface, a new 'Compressed Data' API is introduced to +provide a control and data-streaming interface for audio DSPs. + +The design of this API was inspired by the 2-year experience with the +Intel Moorestown SOC, with many corrections required to upstream the +API in the mainline kernel instead of the staging tree and make it +usable by others. + +Requirements + +The main requirements are: + +- separation between byte counts and time. Compressed formats may have + a header per file, per frame, or no header at all. The payload size + may vary from frame-to-frame. As a result, it is not possible to + estimate reliably the duration of audio buffers when handling + compressed data. Dedicated mechanisms are required to allow for + reliable audio-video synchronization, which requires precise + reporting of the number of samples rendered at any given time. + +- Handling of multiple formats. PCM data only requires a specification + of the sampling rate, number of channels and bits per sample. In + contrast, compressed data comes in a variety of formats. Audio DSPs + may also provide support for a limited number of audio encoders and + decoders embedded in firmware, or may support more choices through + dynamic download of libraries. + +- Focus on main formats. This API provides support for the most + popular formats used for audio and video capture and playback. It is + likely that as audio compression technology advances, new formats + will be added. + +- Handling of multiple configurations. Even for a given format like + AAC, some implementations may support AAC multichannel but HE-AAC + stereo. Likewise WMA10 level M3 may require too much memory and cpu + cycles. The new API needs to provide a generic way of listing these + formats. + +- Rendering/Grabbing only. This API does not provide any means of + hardware acceleration, where PCM samples are provided back to + user-space for additional processing. This API focuses instead on + streaming compressed data to a DSP, with the assumption that the + decoded samples are routed to a physical output or logical back-end. + + - Complexity hiding. Existing user-space multimedia frameworks all + have existing enums/structures for each compressed format. This new + API assumes the existence of a platform-specific compatibility layer + to expose, translate and make use of the capabilities of the audio + DSP, eg. Android HAL or PulseAudio sinks. By construction, regular + applications are not supposed to make use of this API. + + +Design + +The new API shares a number of concepts with with the PCM API for flow +control. Start, pause, resume, drain and stop commands have the same +semantics no matter what the content is. + +The concept of memory ring buffer divided in a set of fragments is +borrowed from the ALSA PCM API. However, only sizes in bytes can be +specified. + +Seeks/trick modes are assumed to be handled by the host. + +The notion of rewinds/forwards is not supported. Data committed to the +ring buffer cannot be invalidated, except when dropping all buffers. + +The Compressed Data API does not make any assumptions on how the data +is transmitted to the audio DSP. DMA transfers from main memory to an +embedded audio cluster or to a SPI interface for external DSPs are +possible. As in the ALSA PCM case, a core set of routines is exposed; +each driver implementer will have to write support for a set of +mandatory routines and possibly make use of optional ones. + +The main additions are + +- get_caps +This routine returns the list of audio formats supported. Querying the +codecs on a capture stream will return encoders, decoders will be +listed for playback streams. + +- get_codec_caps For each codec, this routine returns a list of +capabilities. The intent is to make sure all the capabilities +correspond to valid settings, and to minimize the risks of +configuration failures. For example, for a complex codec such as AAC, +the number of channels supported may depend on a specific profile. If +the capabilities were exposed with a single descriptor, it may happen +that a specific combination of profiles/channels/formats may not be +supported. Likewise, embedded DSPs have limited memory and cpu cycles, +it is likely that some implementations make the list of capabilities +dynamic and dependent on existing workloads. In addition to codec +settings, this routine returns the minimum buffer size handled by the +implementation. This information can be a function of the DMA buffer +sizes, the number of bytes required to synchronize, etc, and can be +used by userspace to define how much needs to be written in the ring +buffer before playback can start. + +- set_params +This routine sets the configuration chosen for a specific codec. The +most important field in the parameters is the codec type; in most +cases decoders will ignore other fields, while encoders will strictly +comply to the settings + +- get_params +This routines returns the actual settings used by the DSP. Changes to +the settings should remain the exception. + +- get_timestamp +The timestamp becomes a multiple field structure. It lists the number +of bytes transferred, the number of samples processed and the number +of samples rendered/grabbed. All these values can be used to determine +the avarage bitrate, figure out if the ring buffer needs to be +refilled or the delay due to decoding/encoding/io on the DSP. + +Note that the list of codecs/profiles/modes was derived from the +OpenMAX AL specification instead of reinventing the wheel. +Modifications include: +- Addition of FLAC and IEC formats +- Merge of encoder/decoder capabilities +- Profiles/modes listed as bitmasks to make descriptors more compact +- Addition of set_params for decoders (missing in OpenMAX AL) +- Addition of AMR/AMR-WB encoding modes (missing in OpenMAX AL) +- Addition of format information for WMA +- Addition of encoding options when required (derived from OpenMAX IL) +- Addition of rateControlSupported (missing in OpenMAX AL) + +Not supported: + +- Support for VoIP/circuit-switched calls is not the target of this + API. Support for dynamic bit-rate changes would require a tight + coupling between the DSP and the host stack, limiting power savings. + +- Packet-loss concealment is not supported. This would require an + additional interface to let the decoder synthesize data when frames + are lost during transmission. This may be added in the future. + +- Volume control/routing is not handled by this API. Devices exposing a + compressed data interface will be considered as regular ALSA devices; + volume changes and routing information will be provided with regular + ALSA kcontrols. + +- Embedded audio effects. Such effects should be enabled in the same + manner, no matter if the input was PCM or compressed. + +- multichannel IEC encoding. Unclear if this is required. + +- Encoding/decoding acceleration is not supported as mentioned + above. It is possible to route the output of a decoder to a capture + stream, or even implement transcoding capabilities. This routing + would be enabled with ALSA kcontrols. + +- Audio policy/resource management. This API does not provide any + hooks to query the utilization of the audio DSP, nor any premption + mechanisms. + +- No notion of underun/overrun. Since the bytes written are compressed + in nature and data written/read doesn't translate directly to + rendered output in time, this does not deal with underrun/overun and + maybe dealt in user-library + +Credits: +- Mark Brown and Liam Girdwood for discussions on the need for this API +- Harsha Priya for her work on intel_sst compressed API +- Rakesh Ughreja for valuable feedback +- Sing Nallasellan, Sikkandar Madar and Prasanna Samaga for + demonstrating and quantifying the benefits of audio offload on a + real platform. -- cgit v1.2.3