From b23af6ad8d2f708c4c3f92dd8f82c233247ba8bf Mon Sep 17 00:00:00 2001 From: Philipp Rossak Date: Wed, 14 Feb 2018 15:10:24 +0100 Subject: ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties The eldoin is supplied from the dcdc1 regulator. The N_VBUSEN pin is connected to an external power regulator (SY6280AAC). With this commit we update the pmic binding properties to support those features. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Cc: Signed-off-by: Philipp Rossak Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 51e6f1d21c32..fb34f32502cf 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -163,6 +163,8 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; }; -- cgit v1.2.3 From 70b8d21496758dd7ff600ec9de0ee3812fac7a40 Mon Sep 17 00:00:00 2001 From: Philipp Rossak Date: Wed, 14 Feb 2018 15:10:25 +0100 Subject: ARM: dts: sun6i: a31s: bpi-m2: add missing regulators This patch fixes a bootproblem with the Bananapi M2 board. Since there are some regulators missing we add them right now. Those values come from the schematic, below you can find a small overview: * reg_aldo1: 3,3V, powers the wifi * reg_aldo2: 2,5V, powers the IO of the RTL8211E * reg_aldo3: 3,3V, powers the audio * reg_dldo1: 3,0V, powers the RTL8211E * reg_dldo2: 2,8V, powers the analog part of the csi * reg_dldo3: 3,3V, powers misc * reg_eldo1: 1,8V, powers the csi * reg_ldo_io1:1,8V, powers the gpio * reg_dc5ldo: needs to be always on This patch updates also the vmmc-supply properties on the mmc0 and mmc2 node to use the allready existent regulators. We can now remove the sunxi-common-regulators.dtsi include since we don't need it anymore. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Cc: Signed-off-by: Philipp Rossak Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 61 ++++++++++++++++++++++-- 1 file changed, 58 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index fb34f32502cf..b2758dd8ce43 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include / { @@ -99,6 +98,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -118,7 +118,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ cd-inverted; @@ -132,7 +132,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; @@ -195,7 +195,28 @@ #include "axp22x.dtsi" +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_dc5ldo { + regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; regulator-name = "vdd-cpus"; @@ -235,6 +256,40 @@ regulator-name = "vcc-dram"; }; +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- cgit v1.2.3 From 0a815fc929e62f54a22a09e10e18f038e6d63c39 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 2 Feb 2018 13:35:10 +0100 Subject: MAINTAINERS: update email address for Maxime Ripard Free Electrons is now Bootlin, change my email address accordingly. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3bdc260e36b7..20fbeede1357 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1152,7 +1152,7 @@ S: Maintained F: drivers/clk/sunxi/ ARM/Allwinner sunXi SoC support -M: Maxime Ripard +M: Maxime Ripard M: Chen-Yu Tsai L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -4624,7 +4624,7 @@ F: include/uapi/drm/drm* F: include/linux/vga* DRM DRIVERS FOR ALLWINNER A10 -M: Maxime Ripard +M: Maxime Ripard L: dri-devel@lists.freedesktop.org S: Supported F: drivers/gpu/drm/sun4i/ -- cgit v1.2.3 From ba6887836178d43b3665b9da075c2c5dfe1d207c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 22 Feb 2018 10:02:49 -0800 Subject: ARM: OMAP: Fix dmtimer init for omap1 We need to enable PM runtime on omap1 also as otherwise we will get errors: omap_timer omap_timer.1: omap_dm_timer_probe: pm_runtime_get_sync failed! omap_timer: probe of omap_timer.1 failed with error -13 ... We are checking for OMAP_TIMER_NEEDS_RESET flag elsewhere so this is safe to do. Cc: Aaro Koskinen Cc: Keerthy Cc: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index d443e481c3e9..8805a59bae53 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -888,11 +888,8 @@ static int omap_dm_timer_probe(struct platform_device *pdev) timer->irq = irq->start; timer->pdev = pdev; - /* Skip pm_runtime_enable for OMAP1 */ - if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { - pm_runtime_enable(dev); - pm_runtime_irq_safe(dev); - } + pm_runtime_enable(dev); + pm_runtime_irq_safe(dev); if (!timer->reserved) { ret = pm_runtime_get_sync(dev); -- cgit v1.2.3 From b91e146c38b003c899710ede6d05fc824675e386 Mon Sep 17 00:00:00 2001 From: Richard Lai Date: Sat, 17 Feb 2018 16:28:24 +0000 Subject: iio: chemical: ccs811: Corrected firmware boot/application mode transition CCS811 has different I2C register maps in boot and application mode. When CCS811 is in boot mode, register APP_START (0xF4) is used to transit the firmware state from boot to application mode. However, APP_START is not a valid register location when CCS811 is in application mode (refer to "CCS811 Bootloader Register Map" and "CCS811 Application Register Map" in CCS811 datasheet). The driver should not attempt to perform a write to APP_START while CCS811 is in application mode, as this is not a valid or documented register location. When prob function is being called, the driver assumes the CCS811 sensor is in boot mode, and attempts to perform a write to APP_START. Although CCS811 powers-up in boot mode, it may have already been transited to application mode by previous instances, e.g. unload and reload device driver by the system, or explicitly by user. Depending on the system design, CCS811 sensor may be permanently connected to system power source rather than power controlled by GPIO, hence it is possible that the sensor is never power reset, thus the firmware could be in either boot or application mode at any given time when driver prob function is being called. This patch checks the STATUS register before attempting to send a write to APP_START. Only if the firmware is not in application mode and has valid firmware application loaded, then it will continue to start transiting the firmware boot to application mode. Signed-off-by: Richard Lai Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/chemical/ccs811.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c index fbe2431f5b81..1ea9f5513b02 100644 --- a/drivers/iio/chemical/ccs811.c +++ b/drivers/iio/chemical/ccs811.c @@ -133,6 +133,9 @@ static int ccs811_start_sensor_application(struct i2c_client *client) if (ret < 0) return ret; + if ((ret & CCS811_STATUS_FW_MODE_APPLICATION)) + return 0; + if ((ret & CCS811_STATUS_APP_VALID_MASK) != CCS811_STATUS_APP_VALID_LOADED) return -EIO; -- cgit v1.2.3 From 4e4f9fbc5620a060dc7d3a651cdfb001c1d7c2f9 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:55 +0100 Subject: iio: adc: stm32-dfsdm: fix compatible data use Fix use of compatible data: stm32h7 regmap configuration is statically used. Rather use regmap_cfg from compatible data. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 6290332cfd3f..0635f9390b20 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -274,7 +274,7 @@ static int stm32_dfsdm_probe(struct platform_device *pdev) dfsdm->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dfsdm", dfsdm->base, - &stm32h7_dfsdm_regmap_cfg); + dev_data->regmap_cfg); if (IS_ERR(dfsdm->regmap)) { ret = PTR_ERR(dfsdm->regmap); dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n", -- cgit v1.2.3 From c278609bdde9df330b7fe3d61ec1bc1a8cac4a78 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:56 +0100 Subject: iio: adc: stm32-dfsdm: fix call to stop channel stm32_dfsdm_stop_channel must be called with channel id, not filter id. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index daa026d6a94f..0eff8119119c 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -464,7 +464,7 @@ stop_channels: regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id), DFSDM_CR1_RCONT_MASK, 0); - stm32_dfsdm_stop_channel(adc->dfsdm, adc->fl_id); + stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id); return ret; } -- cgit v1.2.3 From 179858efd94f49945d41919c1d09a8e17c2afa98 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:57 +0100 Subject: iio: adc: stm32-dfsdm: fix clock source selection Add missing clock source selection. In case "audio" clock is provided, it's unused currently: "dfsdm" clock is wrongly used by default. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 0635f9390b20..e50efdcc41ff 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -83,7 +83,7 @@ int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm) { struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm); struct device *dev = &priv->pdev->dev; - unsigned int clk_div = priv->spi_clk_out_div; + unsigned int clk_div = priv->spi_clk_out_div, clk_src; int ret; if (atomic_inc_return(&priv->n_active_ch) == 1) { @@ -100,6 +100,14 @@ int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm) } } + /* select clock source, e.g. 0 for "dfsdm" or 1 for "audio" */ + clk_src = priv->aclk ? 1 : 0; + ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0), + DFSDM_CHCFGR1_CKOUTSRC_MASK, + DFSDM_CHCFGR1_CKOUTSRC(clk_src)); + if (ret < 0) + goto disable_aclk; + /* Output the SPI CLKOUT (if clk_div == 0 clock if OFF) */ ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0), DFSDM_CHCFGR1_CKOUTDIV_MASK, -- cgit v1.2.3 From 0645af1b6988467b8362aaf44fb4013abb045bee Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:58 +0100 Subject: iio: adc: stm32-dfsdm: fix multiple channel initialization When several channels are registered (e.g. via st,adc-channels property): - channels array is wrongly filled in. Only 1st element in array is being initialized with last registered channel. Fix it by passing reference to relevant channel (e.g. array[index]). - only last initialized channel can work properly (e.g. unique 'ch_id' is used). Converting any other channel result in conversion timeout. Fix it by getting rid of 'ch_id', use chan->channel instead. Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-adc.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 0eff8119119c..01422d11753c 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -54,7 +54,6 @@ struct stm32_dfsdm_adc { struct stm32_dfsdm *dfsdm; const struct stm32_dfsdm_dev_data *dev_data; unsigned int fl_id; - unsigned int ch_id; /* ADC specific */ unsigned int oversamp; @@ -384,7 +383,7 @@ static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev, { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id]; - struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id]; + struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[chan->channel]; unsigned int sample_freq = adc->sample_freq; unsigned int spi_freq; int ret; @@ -419,18 +418,20 @@ static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev, return len; } -static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma) +static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, + const struct iio_chan_spec *chan, + bool dma) { struct regmap *regmap = adc->dfsdm->regmap; int ret; unsigned int dma_en = 0, cont_en = 0; - ret = stm32_dfsdm_start_channel(adc->dfsdm, adc->ch_id); + ret = stm32_dfsdm_start_channel(adc->dfsdm, chan->channel); if (ret < 0) return ret; ret = stm32_dfsdm_filter_configure(adc->dfsdm, adc->fl_id, - adc->ch_id); + chan->channel); if (ret < 0) goto stop_channels; @@ -464,12 +465,13 @@ stop_channels: regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id), DFSDM_CR1_RCONT_MASK, 0); - stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id); + stm32_dfsdm_stop_channel(adc->dfsdm, chan->channel); return ret; } -static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc) +static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc, + const struct iio_chan_spec *chan) { struct regmap *regmap = adc->dfsdm->regmap; @@ -482,7 +484,7 @@ static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc) regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id), DFSDM_CR1_RCONT_MASK, 0); - stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id); + stm32_dfsdm_stop_channel(adc->dfsdm, chan->channel); } static int stm32_dfsdm_set_watermark(struct iio_dev *indio_dev, @@ -609,6 +611,7 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev) static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); + const struct iio_chan_spec *chan = &indio_dev->channels[0]; int ret; /* Reset adc buffer index */ @@ -618,7 +621,7 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) if (ret < 0) return ret; - ret = stm32_dfsdm_start_conv(adc, true); + ret = stm32_dfsdm_start_conv(adc, chan, true); if (ret) { dev_err(&indio_dev->dev, "Can't start conversion\n"); goto stop_dfsdm; @@ -635,7 +638,7 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) return 0; err_stop_conv: - stm32_dfsdm_stop_conv(adc); + stm32_dfsdm_stop_conv(adc, chan); stop_dfsdm: stm32_dfsdm_stop_dfsdm(adc->dfsdm); @@ -645,11 +648,12 @@ stop_dfsdm: static int stm32_dfsdm_predisable(struct iio_dev *indio_dev) { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); + const struct iio_chan_spec *chan = &indio_dev->channels[0]; if (adc->dma_chan) dmaengine_terminate_all(adc->dma_chan); - stm32_dfsdm_stop_conv(adc); + stm32_dfsdm_stop_conv(adc, chan); stm32_dfsdm_stop_dfsdm(adc->dfsdm); @@ -730,7 +734,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev, if (ret < 0) goto stop_dfsdm; - ret = stm32_dfsdm_start_conv(adc, false); + ret = stm32_dfsdm_start_conv(adc, chan, false); if (ret < 0) { regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id), DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0)); @@ -751,7 +755,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev, else ret = IIO_VAL_INT; - stm32_dfsdm_stop_conv(adc); + stm32_dfsdm_stop_conv(adc, chan); stop_dfsdm: stm32_dfsdm_stop_dfsdm(adc->dfsdm); @@ -765,7 +769,7 @@ static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev, { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id]; - struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id]; + struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[chan->channel]; unsigned int spi_freq = adc->spi_freq; int ret = -EINVAL; @@ -972,7 +976,6 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev, } ch->scan_type.realbits = 24; ch->scan_type.storagebits = 32; - adc->ch_id = ch->channel; return stm32_dfsdm_chan_configure(adc->dfsdm, &adc->dfsdm->ch_list[ch->channel]); @@ -1001,7 +1004,7 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev) } ch->info_mask_separate = BIT(IIO_CHAN_INFO_SAMP_FREQ); - d_ch = &adc->dfsdm->ch_list[adc->ch_id]; + d_ch = &adc->dfsdm->ch_list[ch->channel]; if (d_ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL) adc->spi_freq = adc->dfsdm->spi_master_freq; @@ -1042,8 +1045,8 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev) return -ENOMEM; for (chan_idx = 0; chan_idx < num_ch; chan_idx++) { - ch->scan_index = chan_idx; - ret = stm32_dfsdm_adc_chan_init_one(indio_dev, ch); + ch[chan_idx].scan_index = chan_idx; + ret = stm32_dfsdm_adc_chan_init_one(indio_dev, &ch[chan_idx]); if (ret < 0) { dev_err(&indio_dev->dev, "Channels init failed\n"); return ret; -- cgit v1.2.3 From 6de2aeb5746e79b50d2b99bd63f08da880f735a3 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 12:07:21 +0100 Subject: dt-bindings: iio: adc: sd-modulator: fix io-channel-cells io-channel-cells should be <0> since sigma delta modulator exports only one channel, as described in ../iio/iio-bindings.txt "IIO providers" section. Only the phandle is necessary for IIO consumers in this case. Fixes: af11143757b7 ("IIO: Add DT bindings for sigma delta adc modulator") Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt index e9ebb8a20e0d..ba24ca7ba95e 100644 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt @@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator Required properties: - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use as a generic SD modulator if modulator not specified in compatible list. -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". +- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". Example node: ads1202: adc@0 { compatible = "sd-modulator"; - #io-channel-cells = <1>; + #io-channel-cells = <0>; }; -- cgit v1.2.3 From 2560da49de5d0cfec22e9564023aebfffa094732 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Tue, 27 Feb 2018 12:47:11 -0800 Subject: arm64: dts: rockchip: Fix rk3399-gru-* s2r (pinctrl hogs, wifi reset) Back in the early days when gru devices were still under development we found an issue where the WiFi reset line needed to be configured as early as possible during the boot process to avoid the WiFi module being in a bad state. We found that the way to get the kernel to do this in the earliest possible place was to configure this line in the pinctrl hogs, so that's what we did. For some history here you can see . After the time that change landed in the kernel, we landed a firmware change to configure this line even earlier. See . However, even after the firmware change landed we kept the kernel change to deal with the fact that some people working on devices might take a little while to update their firmware. At this there are definitely zero devices out in the wild that have firmware without the fix in it. Specifically looking in the firmware branch several critically important fixes for memory stability landed after the patch in coreboot and I know we didn't ship without those. Thus, by now, everyone should have the new firmware and it's safe to not have the kernel set this up in a pinctrl hog. Historically, even though it wasn't needed to have this in a pinctrl hog, we still kept it since it didn't hurt. Pinctrl would apply the default hog at bootup and then would never touch things again. That all changed with commit 981ed1bfbc6c ("pinctrl: Really force states during suspend/resume"). After that commit then we'll re-apply the default hog at resume time and that can screw up the reset state of WiFi. ...and on rk3399 if you touch a device on PCIe in the wrong way then the whole system can go haywire. That's what was happening. Specifically you'd resume a rk3399-gru-* device and it would mostly resume, then would crash with some crazy weird crash. One could say, perhaps, that the recent pinctrl change was at fault (and should be fixed) since it changed behavior. ...but that's not really true. The device tree for rk3399-gru is really to blame. Specifically since the pinctrl is defined in the hog and not in the "wlan-pd-n" node then the actual user of this pin doesn't have a pinctrl entry for it. That's bad. Let's fix our problems by just moving the control of "wlan_module_reset_l pinctrl" out of the hog and put them in the proper place. NOTE: in theory, I think it should actually be possible to have a pin controlled _both_ by the hog and by an actual device. Once the device claims the pin I think the hog is supposed to let go. I'm not 100% sure that this works and in any case this solution would be more complex than is necessary. Reported-by: Marc Zyngier Fixes: 48f4d9796d99 ("arm64: dts: rockchip: add Gru/Kevin DTS") Fixes: 981ed1bfbc6c ("pinctrl: Really force states during suspend/resume") Signed-off-by: Douglas Anderson Tested-by: Enric Balletbo i Serra Tested-by: Marc Zyngier Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 03f195025390..204bdb9857b9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -406,8 +406,9 @@ wlan_pd_n: wlan-pd-n { compatible = "regulator-fixed"; regulator-name = "wlan_pd_n"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_reset_l>; - /* Note the wlan_module_reset_l pinctrl */ enable-active-high; gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; @@ -983,12 +984,6 @@ ap_i2c_audio: &i2c8 { pinctrl-0 = < &ap_pwroff /* AP will auto-assert this when in S3 */ &clk_32k /* This pin is always 32k on gru boards */ - - /* - * We want this driven low ASAP; firmware should help us, but - * we can help ourselves too. - */ - &wlan_module_reset_l >; pcfg_output_low: pcfg-output-low { @@ -1168,12 +1163,7 @@ ap_i2c_audio: &i2c8 { }; wlan_module_reset_l: wlan-module-reset-l { - /* - * We want this driven low ASAP (As {Soon,Strongly} As - * Possible), to avoid leakage through the powered-down - * WiFi. - */ - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { -- cgit v1.2.3 From 835a1d5cdefffe08bec46efff11daea9b389baa9 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 2 Mar 2018 08:36:31 +0100 Subject: Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399" This reverts commit c301b327aea898af558b2387252a2f5fc0117dee. While this works splendidly on rk3399-gru devices using the cros-ec extcon, other rk3399-based devices using the fusb302 or no power-delivery controller at all don't probe at all anymore, as the typec-phy currently always expects the extcon to be available and therefore defers probing indefinitly on these. Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 2605118d4b4c..0b81ca1d07e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -411,8 +411,8 @@ reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = ; dr_mode = "otg"; - phys = <&u2phy0_otg>, <&tcphy0_usb3>; - phy-names = "usb2-phy", "usb3-phy"; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; @@ -444,8 +444,8 @@ reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = ; dr_mode = "otg"; - phys = <&u2phy1_otg>, <&tcphy1_usb3>; - phy-names = "usb2-phy", "usb3-phy"; + phys = <&u2phy1_otg>; + phy-names = "usb2-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; -- cgit v1.2.3 From 2fe4c22c53fc2e3f35be2cd0033cb3d15ebd41b1 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 27 Feb 2018 08:03:56 -0500 Subject: media: rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature Since commit 02d742f4b209 ("media: lirc: lirc daemon fails to detect raw IR device"), the feature LIRC_CAN_SEND_SCANCODE is no longer used as it tripped up lircd. The ability to send scancodes for IR Tx is implied by LIRC_CAN_SEND_PULSE (i.e. any device that can send can use IR Tx encoders). So, remove LIRC_CAN_SEND_SCANCODE since it never used. This fixes: Documentation/output/lirc.h.rst:6: WARNING: undefined label: lirc-can-send-scancode (if the link has no caption the label must precede a section header As this flag was added for kernel 4.16, let's remove it, while not too late. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/lirc.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h index 4fe580d36e41..f5bf06ecd87d 100644 --- a/include/uapi/linux/lirc.h +++ b/include/uapi/linux/lirc.h @@ -54,7 +54,6 @@ #define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) #define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) #define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) -#define LIRC_CAN_SEND_SCANCODE LIRC_MODE2SEND(LIRC_MODE_SCANCODE) #define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) #define LIRC_CAN_SEND_MASK 0x0000003f -- cgit v1.2.3 From e113d65ae417ae6d9be229649b81d404c47ade79 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 28 Feb 2018 05:47:07 -0500 Subject: media: tegra-cec: reset rx_buf_cnt when start bit detected If a start bit is detected, then reset the receive buffer counter to 0. This ensures that no stale data is in the buffer if a message is broken off midstream due to e.g. a Low Drive condition and then retransmitted. The only Rx interrupts we need to listen to are RX_REGISTER_FULL (i.e. a valid byte was received) and RX_START_BIT_DETECTED (i.e. a new message starts and we need to reset the counter). Signed-off-by: Hans Verkuil Cc: # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/tegra-cec/tegra_cec.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/media/platform/tegra-cec/tegra_cec.c b/drivers/media/platform/tegra-cec/tegra_cec.c index 92f93a880015..aba488cd0e64 100644 --- a/drivers/media/platform/tegra-cec/tegra_cec.c +++ b/drivers/media/platform/tegra-cec/tegra_cec.c @@ -172,16 +172,13 @@ static irqreturn_t tegra_cec_irq_handler(int irq, void *data) } } - if (status & (TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN | - TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED | - TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED | - TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED)) { + if (status & TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED) { cec_write(cec, TEGRA_CEC_INT_STAT, - (TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN | - TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED | - TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED | - TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED)); - } else if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) { + TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED); + cec->rx_done = false; + cec->rx_buf_cnt = 0; + } + if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) { u32 v; cec_write(cec, TEGRA_CEC_INT_STAT, @@ -255,7 +252,7 @@ static int tegra_cec_adap_enable(struct cec_adapter *adap, bool enable) TEGRA_CEC_INT_MASK_TX_BUS_ANOMALY_DETECTED | TEGRA_CEC_INT_MASK_TX_FRAME_TRANSMITTED | TEGRA_CEC_INT_MASK_RX_REGISTER_FULL | - TEGRA_CEC_INT_MASK_RX_REGISTER_OVERRUN); + TEGRA_CEC_INT_MASK_RX_START_BIT_DETECTED); cec_write(cec, TEGRA_CEC_HW_CONTROL, TEGRA_CEC_HWCTRL_TX_RX_MODE); return 0; -- cgit v1.2.3 From 2c27476e398bfd9fa2572ff80a0de16f0becc900 Mon Sep 17 00:00:00 2001 From: Michael Ira Krufky Date: Tue, 16 Jan 2018 22:16:12 -0500 Subject: media: dvb: fix a Kconfig typo drivers/media/Kconfig: typo: replace `with` with `which` Signed-off-by: Michael Ira Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 372c074bb1b9..86c1a190d946 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -151,7 +151,7 @@ config DVB_MMAP select VIDEOBUF2_VMALLOC default n help - This option enables DVB experimental memory-mapped API, with + This option enables DVB experimental memory-mapped API, which reduces the number of context switches to read DVB buffers, as the buffers can use mmap() syscalls. -- cgit v1.2.3 From 4e943a890cef42e90f43ce6be64728a290b97c55 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 1 Mar 2018 14:25:35 -0600 Subject: ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288 dtc now gives the following warning: arch/arm/boot/dts/rk3288-tinker.dtb: Warning (sound_dai_property): /sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in node /hdmi@ff980000 or bad phandle (referred from sound-dai[0]) Add the missing #sound-dai-cells property. Cc: Heiko Stuebner Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 6102e4e7f35c..354aff45c1af 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -927,6 +927,7 @@ i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff890000 0x0 0x10000>; + #sound-dai-cells = <0>; interrupts = ; #address-cells = <1>; #size-cells = <0>; @@ -1176,6 +1177,7 @@ compatible = "rockchip,rk3288-dw-hdmi"; reg = <0x0 0xff980000 0x0 0x20000>; reg-io-width = <4>; + #sound-dai-cells = <0>; rockchip,grf = <&grf>; interrupts = ; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; -- cgit v1.2.3 From 655296c8bbeffcf020558c4455305d597a73bde1 Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Sun, 4 Mar 2018 22:24:08 -0700 Subject: Drivers: hv: vmbus: Fix ring buffer signaling Fix bugs in signaling the Hyper-V host when freeing space in the host->guest ring buffer: 1. The interrupt_mask must not be used to determine whether to signal on the host->guest ring buffer 2. The ring buffer write_index must be read (via hv_get_bytes_to_write) *after* pending_send_sz is read in order to avoid a race condition 3. Comparisons with pending_send_sz must treat the "equals" case as not-enough-space 4. Don't signal if the pending_send_sz feature is not present. Older versions of Hyper-V that don't implement this feature will poll. Fixes: 03bad714a161 ("vmbus: more host signalling avoidance") Cc: Stable # 4.14 and above Signed-off-by: Michael Kelley Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/ring_buffer.c | 52 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 35 insertions(+), 17 deletions(-) diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index 50e071444a5c..8699bb969e7e 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -417,13 +417,24 @@ __hv_pkt_iter_next(struct vmbus_channel *channel, } EXPORT_SYMBOL_GPL(__hv_pkt_iter_next); +/* How many bytes were read in this iterator cycle */ +static u32 hv_pkt_iter_bytes_read(const struct hv_ring_buffer_info *rbi, + u32 start_read_index) +{ + if (rbi->priv_read_index >= start_read_index) + return rbi->priv_read_index - start_read_index; + else + return rbi->ring_datasize - start_read_index + + rbi->priv_read_index; +} + /* * Update host ring buffer after iterating over packets. */ void hv_pkt_iter_close(struct vmbus_channel *channel) { struct hv_ring_buffer_info *rbi = &channel->inbound; - u32 orig_write_sz = hv_get_bytes_to_write(rbi); + u32 curr_write_sz, pending_sz, bytes_read, start_read_index; /* * Make sure all reads are done before we update the read index since @@ -431,8 +442,12 @@ void hv_pkt_iter_close(struct vmbus_channel *channel) * is updated. */ virt_rmb(); + start_read_index = rbi->ring_buffer->read_index; rbi->ring_buffer->read_index = rbi->priv_read_index; + if (!rbi->ring_buffer->feature_bits.feat_pending_send_sz) + return; + /* * Issue a full memory barrier before making the signaling decision. * Here is the reason for having this barrier: @@ -446,26 +461,29 @@ void hv_pkt_iter_close(struct vmbus_channel *channel) */ virt_mb(); - /* If host has disabled notifications then skip */ - if (rbi->ring_buffer->interrupt_mask) + pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + if (!pending_sz) return; - if (rbi->ring_buffer->feature_bits.feat_pending_send_sz) { - u32 pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + /* + * Ensure the read of write_index in hv_get_bytes_to_write() + * happens after the read of pending_send_sz. + */ + virt_rmb(); + curr_write_sz = hv_get_bytes_to_write(rbi); + bytes_read = hv_pkt_iter_bytes_read(rbi, start_read_index); - /* - * If there was space before we began iteration, - * then host was not blocked. Also handles case where - * pending_sz is zero then host has nothing pending - * and does not need to be signaled. - */ - if (orig_write_sz > pending_sz) - return; + /* + * If there was space before we began iteration, + * then host was not blocked. + */ - /* If pending write will not fit, don't give false hope. */ - if (hv_get_bytes_to_write(rbi) < pending_sz) - return; - } + if (curr_write_sz - bytes_read > pending_sz) + return; + + /* If pending write will not fit, don't give false hope. */ + if (curr_write_sz <= pending_sz) + return; vmbus_setevent(channel); } -- cgit v1.2.3 From dbe8a9dfd7eafe2832f80e6e29e5b1575576c987 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 7 Mar 2018 14:20:33 +0100 Subject: ARM: ux500: Fix PMU IRQ regression Commit 2b05f6ae1ee5 ("ARM: ux500: remove PMU IRQ bouncer") deleted some code to bounce and work around the weird PMU IRQs in the DB8500 ASIC, but did a semantic mistake: since the auxdata was now unused, the call to of_platform_populate() was removed, but this does not work: the default platform population will only kick in if .init_machine() is assigned NULL, and since the U8540 was still using the callback that was not the case. Fix this by reinstating the call to of_platform_populate(), but pass NULL as auxdata. Cc: Mark Rutland Cc: Will Deacon Fixes: 2b05f6ae1ee5 ("ARM: ux500: remove PMU IRQ bouncer") Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-ux500/cpu-db8500.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 7e5d7a083707..36cd23c8be9b 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -133,6 +133,9 @@ static void __init u8500_init_machine(void) if (of_machine_is_compatible("st-ericsson,u8540")) of_platform_populate(NULL, u8500_local_bus_nodes, u8540_auxdata_lookup, NULL); + else + of_platform_populate(NULL, u8500_local_bus_nodes, + NULL, NULL); } static const char * stericsson_dt_platform_compat[] = { -- cgit v1.2.3 From 970656b3246d30955894951ed16bd658e42d8c24 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Thu, 1 Mar 2018 14:52:08 +0200 Subject: ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name The two usb-otg regulators for imx7d-sdb are both called "regulator-usb-otg1-vbus" and they effectively override each other. This is most likely a copy-paste error. Fixes: b877039aa1fe ("ARM: dts: imx7d-sdb: Adjust the regulator nodes") Signed-off-by: Leonard Crestez Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index a7a5dc7b2700..e7d2db839d70 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -82,7 +82,7 @@ enable-active-high; }; - reg_usb_otg2_vbus: regulator-usb-otg1-vbus { + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg2_vbus"; regulator-min-microvolt = <5000000>; -- cgit v1.2.3 From 625504aeff11eeb95f78ad9dde22d911c6839c71 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Thu, 22 Feb 2018 00:32:50 +0100 Subject: pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When adding GP-1-28 port pin support it was forgotten to remove the CLKOUT pin from the list of pins that are not associated with a GPIO port in pinmux_pins[]. This results in a warning when reading the pinctrl files in sysfs as the CLKOUT pin is still added as a none GPIO pin. Fix this by removing the duplicated entry which is no longer needed. ~ # cat /sys/kernel/debug/pinctrl/e6060000.pin-controller/pinconf-pins [ 89.432081] ------------[ cut here ]------------ [ 89.436904] Pin 496 is not in bias info list [ 89.441252] WARNING: CPU: 1 PID: 456 at drivers/pinctrl/sh-pfc/core.c:408 sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.451002] CPU: 1 PID: 456 Comm: cat Not tainted 4.16.0-rc1-arm64-renesas-00048-gdfafc344a4f24dde #12 [ 89.460394] Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) [ 89.468910] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 89.473747] pc : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.478495] lr : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.483241] sp : ffff00000aff3ab0 [ 89.486587] x29: ffff00000aff3ab0 x28: ffff00000893c698 [ 89.491955] x27: ffff000008ad7d98 x26: 0000000000000000 [ 89.497323] x25: ffff8006fb3f5028 x24: ffff8006fb3f5018 [ 89.502690] x23: 0000000000000001 x22: 00000000000001f0 [ 89.508057] x21: ffff8006fb3f5018 x20: ffff000008bef000 [ 89.513423] x19: 0000000000000000 x18: ffffffffffffffff [ 89.518790] x17: 0000000000006c4a x16: ffff000008d67c98 [ 89.524157] x15: 0000000000000001 x14: ffff00000896ca98 [ 89.529524] x13: 00000000cce5f611 x12: ffff8006f8d3b5a8 [ 89.534891] x11: ffff00000981e000 x10: ffff000008befa08 [ 89.540258] x9 : ffff8006f9b987a0 x8 : ffff000008befa08 [ 89.545625] x7 : ffff000008137094 x6 : 0000000000000000 [ 89.550991] x5 : 0000000000000000 x4 : 0000000000000001 [ 89.556357] x3 : 0000000000000007 x2 : 0000000000000007 [ 89.561723] x1 : 1ff24f80f1818600 x0 : 0000000000000000 [ 89.567091] Call trace: [ 89.569561] sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.573960] r8a7795_pinmux_get_bias+0x30/0xc0 [ 89.578445] sh_pfc_pinconf_get+0x1e0/0x2d8 [ 89.582669] pin_config_get_for_pin+0x20/0x30 [ 89.587067] pinconf_generic_dump_one+0x180/0x1c8 [ 89.591815] pinconf_generic_dump_pins+0x84/0xd8 [ 89.596476] pinconf_pins_show+0xc8/0x130 [ 89.600528] seq_read+0xe4/0x510 [ 89.603789] full_proxy_read+0x60/0x90 [ 89.607576] __vfs_read+0x30/0x140 [ 89.611010] vfs_read+0x90/0x170 [ 89.614269] SyS_read+0x60/0xd8 [ 89.617443] __sys_trace_return+0x0/0x4 [ 89.621314] ---[ end trace 99c8d0d39c13e794 ]--- Fixes: 82d2de5a4f646f72 ("pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support") Reviewed-and-tested-by: Geert Uytterhoeven Signed-off-by: Niklas Söderlund Signed-off-by: Linus Walleij --- drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c index 18aeee592fdc..35951e7b89d2 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c @@ -1538,7 +1538,6 @@ static const struct sh_pfc_pin pinmux_pins[] = { SH_PFC_PIN_NAMED_CFG('B', 18, AVB_TD1, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('B', 19, AVB_RXC, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('C', 1, PRESETOUT#, CFG_FLAGS), - SH_PFC_PIN_NAMED_CFG('F', 1, CLKOUT, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('H', 37, MLB_REF, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('V', 3, QSPI1_SPCLK, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('V', 5, QSPI1_SSL, CFG_FLAGS), -- cgit v1.2.3 From 93b0beae721b3344923b4b8317e9d83b542f4ca6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 20 Feb 2018 19:17:51 +0100 Subject: pinctrl: samsung: Validate alias coming from DT Driver uses alias from Device Tree as an index of pin controller data array. In case of a wrong DTB or an out-of-tree DTB, the alias could be outside of this data array leading to out-of-bounds access. Depending on binary and memory layout, this could be handled properly (showing error like "samsung-pinctrl 3860000.pinctrl: driver data not available") or could lead to exceptions. Reported-by: Geert Uytterhoeven Cc: Fixes: 30574f0db1b1 ("pinctrl: add samsung pinctrl and gpiolib driver") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Geert Uytterhoeven Acked-by: Tomasz Figa Signed-off-by: Linus Walleij --- drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 56 +++++++++++++++++++---- drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 14 +++++- drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 28 ++++++++++-- drivers/pinctrl/samsung/pinctrl-s3c64xx.c | 7 ++- drivers/pinctrl/samsung/pinctrl-samsung.c | 61 ++++++++++++++++---------- drivers/pinctrl/samsung/pinctrl-samsung.h | 40 ++++++++++------- 6 files changed, 154 insertions(+), 52 deletions(-) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c index c32399faff57..90c274490181 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c @@ -124,7 +124,7 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = { EXYNOS_PIN_BANK_EINTW(8, 0xc60, "gph3", 0x0c), }; -const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = s5pv210_pin_bank, @@ -137,6 +137,11 @@ const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s5pv210_of_data __initconst = { + .ctrl = s5pv210_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s5pv210_pin_ctrl), +}; + /* Pad retention control code for accessing PMU regmap */ static atomic_t exynos_shared_retention_refcnt; @@ -199,7 +204,7 @@ static const struct samsung_retention_data exynos3250_retention_data __initconst * Samsung pinctrl driver data for Exynos3250 SoC. Exynos3250 SoC includes * two gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos3250_pin_banks0, @@ -220,6 +225,11 @@ const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos3250_of_data __initconst = { + .ctrl = exynos3250_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos3250_pin_ctrl), +}; + /* pin banks of exynos4210 pin-controller 0 */ static const struct samsung_pin_bank_data exynos4210_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -303,7 +313,7 @@ static const struct samsung_retention_data exynos4_audio_retention_data __initco * Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes * three gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos4210_pin_banks0, @@ -329,6 +339,11 @@ const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos4210_of_data __initconst = { + .ctrl = exynos4210_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos4210_pin_ctrl), +}; + /* pin banks of exynos4x12 pin-controller 0 */ static const struct samsung_pin_bank_data exynos4x12_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -391,7 +406,7 @@ static const struct samsung_pin_bank_data exynos4x12_pin_banks3[] __initconst = * Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos4x12_pin_banks0, @@ -427,6 +442,11 @@ const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos4x12_of_data __initconst = { + .ctrl = exynos4x12_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos4x12_pin_ctrl), +}; + /* pin banks of exynos5250 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5250_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -487,7 +507,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks3[] __initconst = * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5250_pin_banks0, @@ -523,6 +543,11 @@ const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5250_of_data __initconst = { + .ctrl = exynos5250_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5250_pin_ctrl), +}; + /* pin banks of exynos5260 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5260_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpa0", 0x00), @@ -567,7 +592,7 @@ static const struct samsung_pin_bank_data exynos5260_pin_banks2[] __initconst = * Samsung pinctrl driver data for Exynos5260 SoC. Exynos5260 SoC includes * three gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5260_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5260_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5260_pin_banks0, @@ -587,6 +612,11 @@ const struct samsung_pin_ctrl exynos5260_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5260_of_data __initconst = { + .ctrl = exynos5260_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5260_pin_ctrl), +}; + /* pin banks of exynos5410 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -657,7 +687,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks3[] __initconst = * Samsung pinctrl driver data for Exynos5410 SoC. Exynos5410 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5410_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5410_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5410_pin_banks0, @@ -690,6 +720,11 @@ const struct samsung_pin_ctrl exynos5410_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5410_of_data __initconst = { + .ctrl = exynos5410_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5410_pin_ctrl), +}; + /* pin banks of exynos5420 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5420_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00), @@ -774,7 +809,7 @@ static const struct samsung_retention_data exynos5420_retention_data __initconst * Samsung pinctrl driver data for Exynos5420 SoC. Exynos5420 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5420_pin_banks0, @@ -808,3 +843,8 @@ const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = { .retention_data = &exynos4_audio_retention_data, }, }; + +const struct samsung_pinctrl_of_match_data exynos5420_of_data __initconst = { + .ctrl = exynos5420_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5420_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c index fc8f7833bec0..71c9d1d9f345 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c @@ -175,7 +175,7 @@ static const struct samsung_retention_data exynos5433_fsys_retention_data __init * Samsung pinctrl driver data for Exynos5433 SoC. Exynos5433 SoC includes * ten gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5433_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5433_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5433_pin_banks0, @@ -260,6 +260,11 @@ const struct samsung_pin_ctrl exynos5433_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5433_of_data __initconst = { + .ctrl = exynos5433_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5433_pin_ctrl), +}; + /* pin banks of exynos7 pin-controller - ALIVE */ static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00), @@ -339,7 +344,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks9[] __initconst = { EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04), }; -const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { { /* pin-controller instance 0 Alive data */ .pin_banks = exynos7_pin_banks0, @@ -392,3 +397,8 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { .eint_gpio_init = exynos_eint_gpio_init, }, }; + +const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = { + .ctrl = exynos7_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos7_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c index 10187cb0e9b9..7e824e4d20f4 100644 --- a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c +++ b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c @@ -565,7 +565,7 @@ static const struct samsung_pin_bank_data s3c2412_pin_banks[] __initconst = { PIN_BANK_2BIT(13, 0x080, "gpj"), }; -const struct samsung_pin_ctrl s3c2412_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2412_pin_ctrl[] __initconst = { { .pin_banks = s3c2412_pin_banks, .nr_banks = ARRAY_SIZE(s3c2412_pin_banks), @@ -573,6 +573,11 @@ const struct samsung_pin_ctrl s3c2412_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s3c2412_of_data __initconst = { + .ctrl = s3c2412_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2412_pin_ctrl), +}; + static const struct samsung_pin_bank_data s3c2416_pin_banks[] __initconst = { PIN_BANK_A(27, 0x000, "gpa"), PIN_BANK_2BIT(11, 0x010, "gpb"), @@ -587,7 +592,7 @@ static const struct samsung_pin_bank_data s3c2416_pin_banks[] __initconst = { PIN_BANK_2BIT(2, 0x100, "gpm"), }; -const struct samsung_pin_ctrl s3c2416_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2416_pin_ctrl[] __initconst = { { .pin_banks = s3c2416_pin_banks, .nr_banks = ARRAY_SIZE(s3c2416_pin_banks), @@ -595,6 +600,11 @@ const struct samsung_pin_ctrl s3c2416_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s3c2416_of_data __initconst = { + .ctrl = s3c2416_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2416_pin_ctrl), +}; + static const struct samsung_pin_bank_data s3c2440_pin_banks[] __initconst = { PIN_BANK_A(25, 0x000, "gpa"), PIN_BANK_2BIT(11, 0x010, "gpb"), @@ -607,7 +617,7 @@ static const struct samsung_pin_bank_data s3c2440_pin_banks[] __initconst = { PIN_BANK_2BIT(13, 0x0d0, "gpj"), }; -const struct samsung_pin_ctrl s3c2440_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2440_pin_ctrl[] __initconst = { { .pin_banks = s3c2440_pin_banks, .nr_banks = ARRAY_SIZE(s3c2440_pin_banks), @@ -615,6 +625,11 @@ const struct samsung_pin_ctrl s3c2440_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s3c2440_of_data __initconst = { + .ctrl = s3c2440_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2440_pin_ctrl), +}; + static const struct samsung_pin_bank_data s3c2450_pin_banks[] __initconst = { PIN_BANK_A(28, 0x000, "gpa"), PIN_BANK_2BIT(11, 0x010, "gpb"), @@ -630,10 +645,15 @@ static const struct samsung_pin_bank_data s3c2450_pin_banks[] __initconst = { PIN_BANK_2BIT(2, 0x100, "gpm"), }; -const struct samsung_pin_ctrl s3c2450_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2450_pin_ctrl[] __initconst = { { .pin_banks = s3c2450_pin_banks, .nr_banks = ARRAY_SIZE(s3c2450_pin_banks), .eint_wkup_init = s3c24xx_eint_init, }, }; + +const struct samsung_pinctrl_of_match_data s3c2450_of_data __initconst = { + .ctrl = s3c2450_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2450_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c index 679628ac4b31..288e6567ceb1 100644 --- a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c +++ b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c @@ -789,7 +789,7 @@ static const struct samsung_pin_bank_data s3c64xx_pin_banks0[] __initconst = { * Samsung pinctrl driver data for S3C64xx SoC. S3C64xx SoC includes * one gpio/pin-mux/pinconfig controller. */ -const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { { /* pin-controller instance 1 data */ .pin_banks = s3c64xx_pin_banks0, @@ -798,3 +798,8 @@ const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { .eint_wkup_init = s3c64xx_eint_eint0_init, }, }; + +const struct samsung_pinctrl_of_match_data s3c64xx_of_data __initconst = { + .ctrl = s3c64xx_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c64xx_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c index da58e4554137..336e88d7bdb9 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.c +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c @@ -942,12 +942,33 @@ static int samsung_gpiolib_register(struct platform_device *pdev, return 0; } +static const struct samsung_pin_ctrl * +samsung_pinctrl_get_soc_data_for_of_alias(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + const struct samsung_pinctrl_of_match_data *of_data; + int id; + + id = of_alias_get_id(node, "pinctrl"); + if (id < 0) { + dev_err(&pdev->dev, "failed to get alias id\n"); + return NULL; + } + + of_data = of_device_get_match_data(&pdev->dev); + if (id >= of_data->num_ctrl) { + dev_err(&pdev->dev, "invalid alias id %d\n", id); + return NULL; + } + + return &(of_data->ctrl[id]); +} + /* retrieve the soc specific data */ static const struct samsung_pin_ctrl * samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d, struct platform_device *pdev) { - int id; struct device_node *node = pdev->dev.of_node; struct device_node *np; const struct samsung_pin_bank_data *bdata; @@ -957,13 +978,9 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d, void __iomem *virt_base[SAMSUNG_PINCTRL_NUM_RESOURCES]; unsigned int i; - id = of_alias_get_id(node, "pinctrl"); - if (id < 0) { - dev_err(&pdev->dev, "failed to get alias id\n"); + ctrl = samsung_pinctrl_get_soc_data_for_of_alias(pdev); + if (!ctrl) return ERR_PTR(-ENOENT); - } - ctrl = of_device_get_match_data(&pdev->dev); - ctrl += id; d->suspend = ctrl->suspend; d->resume = ctrl->resume; @@ -1188,41 +1205,41 @@ static int __maybe_unused samsung_pinctrl_resume(struct device *dev) static const struct of_device_id samsung_pinctrl_dt_match[] = { #ifdef CONFIG_PINCTRL_EXYNOS_ARM { .compatible = "samsung,exynos3250-pinctrl", - .data = exynos3250_pin_ctrl }, + .data = &exynos3250_of_data }, { .compatible = "samsung,exynos4210-pinctrl", - .data = exynos4210_pin_ctrl }, + .data = &exynos4210_of_data }, { .compatible = "samsung,exynos4x12-pinctrl", - .data = exynos4x12_pin_ctrl }, + .data = &exynos4x12_of_data }, { .compatible = "samsung,exynos5250-pinctrl", - .data = exynos5250_pin_ctrl }, + .data = &exynos5250_of_data }, { .compatible = "samsung,exynos5260-pinctrl", - .data = exynos5260_pin_ctrl }, + .data = &exynos5260_of_data }, { .compatible = "samsung,exynos5410-pinctrl", - .data = exynos5410_pin_ctrl }, + .data = &exynos5410_of_data }, { .compatible = "samsung,exynos5420-pinctrl", - .data = exynos5420_pin_ctrl }, + .data = &exynos5420_of_data }, { .compatible = "samsung,s5pv210-pinctrl", - .data = s5pv210_pin_ctrl }, + .data = &s5pv210_of_data }, #endif #ifdef CONFIG_PINCTRL_EXYNOS_ARM64 { .compatible = "samsung,exynos5433-pinctrl", - .data = exynos5433_pin_ctrl }, + .data = &exynos5433_of_data }, { .compatible = "samsung,exynos7-pinctrl", - .data = exynos7_pin_ctrl }, + .data = &exynos7_of_data }, #endif #ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", - .data = s3c64xx_pin_ctrl }, + .data = &s3c64xx_of_data }, #endif #ifdef CONFIG_PINCTRL_S3C24XX { .compatible = "samsung,s3c2412-pinctrl", - .data = s3c2412_pin_ctrl }, + .data = &s3c2412_of_data }, { .compatible = "samsung,s3c2416-pinctrl", - .data = s3c2416_pin_ctrl }, + .data = &s3c2416_of_data }, { .compatible = "samsung,s3c2440-pinctrl", - .data = s3c2440_pin_ctrl }, + .data = &s3c2440_of_data }, { .compatible = "samsung,s3c2450-pinctrl", - .data = s3c2450_pin_ctrl }, + .data = &s3c2450_of_data }, #endif {}, }; diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h index e204f609823b..f0cda9424dfe 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.h +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h @@ -281,6 +281,16 @@ struct samsung_pinctrl_drv_data { void (*resume)(struct samsung_pinctrl_drv_data *); }; +/** + * struct samsung_pinctrl_of_match_data: OF match device specific configuration data. + * @ctrl: array of pin controller data. + * @num_ctrl: size of array @ctrl. + */ +struct samsung_pinctrl_of_match_data { + const struct samsung_pin_ctrl *ctrl; + unsigned int num_ctrl; +}; + /** * struct samsung_pin_group: represent group of pins of a pinmux function. * @name: name of the pin group, used to lookup the group. @@ -309,20 +319,20 @@ struct samsung_pmx_func { }; /* list of all exported SoC specific data */ -extern const struct samsung_pin_ctrl exynos3250_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos4210_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5250_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5260_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5410_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5420_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5433_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos7_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c64xx_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2412_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2416_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2440_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2450_pin_ctrl[]; -extern const struct samsung_pin_ctrl s5pv210_pin_ctrl[]; +extern const struct samsung_pinctrl_of_match_data exynos3250_of_data; +extern const struct samsung_pinctrl_of_match_data exynos4210_of_data; +extern const struct samsung_pinctrl_of_match_data exynos4x12_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5250_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5260_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5410_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5420_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5433_of_data; +extern const struct samsung_pinctrl_of_match_data exynos7_of_data; +extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2412_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2416_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2440_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2450_of_data; +extern const struct samsung_pinctrl_of_match_data s5pv210_of_data; #endif /* __PINCTRL_SAMSUNG_H */ -- cgit v1.2.3 From 601ff7edc748213fc6d4d7c1ded6467edbd1f1c2 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 31 Aug 2017 15:56:53 +0100 Subject: MAINTAINERS: Update Tegra IOMMU maintainer The email address for the Tegra IOMMU maintainer, Hiroshi, is no longer valid. Hiroshi has not been maintaining the Tegra IOMMU driver for some time now and so remove Hiroshi as the maintainer and add Thierry Reding instead. Also add the mailing list information for this driver as well. Signed-off-by: Jon Hunter Acked-by: Thierry Reding Signed-off-by: Thierry Reding --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3bdc260e36b7..0666381e7224 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13619,7 +13619,8 @@ S: Supported F: drivers/i2c/busses/i2c-tegra.c TEGRA IOMMU DRIVERS -M: Hiroshi Doyu +M: Thierry Reding +L: linux-tegra@vger.kernel.org S: Supported F: drivers/iommu/tegra* -- cgit v1.2.3 From c4dc56be7e26040bfc60ce73425353516a356955 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 1 Mar 2018 11:34:48 +0100 Subject: ARM: davinci: fix the GPIO lookup for omapl138-hawk The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that mmc can correctly lookup the wp and cp gpios. Note that it is the gpio-davinci driver that sets the gpiochip label to davinci_gpio.0. Fixes: c69f43fb4f26 ("ARM: davinci: hawk: use gpio descriptor for mmc pins") Signed-off-by: Bartosz Golaszewski [nsekhar@ti.com: add a note on where the chip label is set] Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index a3e78074be70..62eb7d668890 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -127,8 +127,8 @@ static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/ - GPIO_LOOKUP("davinci_gpio.1", 28, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.1", 29, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW), }, }; -- cgit v1.2.3 From c535d632aecc6359d072374675a7787cbe71773b Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 27 Feb 2018 18:04:25 +0100 Subject: mailmap: Update email address for Gregory CLEMENT As now Free Electrons is Bootlin. Signed-off-by: Gregory CLEMENT --- .mailmap | 1 + 1 file changed, 1 insertion(+) diff --git a/.mailmap b/.mailmap index e18cab73e209..a2ce89a456c2 100644 --- a/.mailmap +++ b/.mailmap @@ -62,6 +62,7 @@ Frank Zago Greg Kroah-Hartman Greg Kroah-Hartman Greg Kroah-Hartman +Gregory CLEMENT Henk Vergonet Henrik Kretzschmar Henrik Rydberg -- cgit v1.2.3 From 3c3e4b3a708a9d6451052e348981f37d2b3e92b0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 8 Mar 2018 12:31:53 +0300 Subject: iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock() The meson_sar_adc_lock() function is not supposed to hold the "indio_dev->mlock" on the error path. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: Dan Carpenter Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/meson_saradc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 29fa7736d80c..ede955d9b2a4 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -462,8 +462,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev) regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val); } while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--); - if (timeout < 0) + if (timeout < 0) { + mutex_unlock(&indio_dev->mlock); return -ETIMEDOUT; + } } return 0; -- cgit v1.2.3 From cc4e0036311fbb0b2cab7dc8f142f84ebd8b388b Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 10 Mar 2018 16:21:32 +0000 Subject: Revert "iio: accel: st_accel: remove redundant pointer pdata" This reverts commit 585ed27d06151f98e39238298f43ee261314ae74. This removed code which was unused due to a bug in commit 7383d44b. To fix this bug the code is needed. Thus this revert. Signed-off-by: Michael Nosthoff Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 6fe995cf16a6..460aa58e0159 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -920,6 +920,8 @@ static const struct iio_trigger_ops st_accel_trigger_ops = { int st_accel_common_probe(struct iio_dev *indio_dev) { struct st_sensor_data *adata = iio_priv(indio_dev); + struct st_sensors_platform_data *pdata = + (struct st_sensors_platform_data *)adata->dev->platform_data; int irq = adata->get_irq_data_ready(indio_dev); int err; @@ -946,6 +948,9 @@ int st_accel_common_probe(struct iio_dev *indio_dev) &adata->sensor_settings->fs.fs_avl[0]; adata->odr = adata->sensor_settings->odr.odr_avl[0].hz; + if (!pdata) + pdata = (struct st_sensors_platform_data *)&default_accel_pdata; + err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data); if (err < 0) goto st_accel_power_off; -- cgit v1.2.3 From 8b438686a001db64c21782d04ef68111e53c45d9 Mon Sep 17 00:00:00 2001 From: Michael Nosthoff Date: Fri, 9 Mar 2018 10:02:45 +0100 Subject: iio: st_pressure: st_accel: pass correct platform data to init Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by: Michael Nosthoff Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 2 +- drivers/iio/pressure/st_pressure_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 460aa58e0159..3e6fd5a8ac5b 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -951,7 +951,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev) if (!pdata) pdata = (struct st_sensors_platform_data *)&default_accel_pdata; - err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data); + err = st_sensors_init_sensor(indio_dev, pdata); if (err < 0) goto st_accel_power_off; diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 349e5c713c03..4ddb6cf7d401 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -640,7 +640,7 @@ int st_press_common_probe(struct iio_dev *indio_dev) press_data->sensor_settings->drdy_irq.int2.addr)) pdata = (struct st_sensors_platform_data *)&default_press_pdata; - err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data); + err = st_sensors_init_sensor(indio_dev, pdata); if (err < 0) goto st_press_power_off; -- cgit v1.2.3 From 9bdc00a5c16f5d5306756afdbe2811be4061c945 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Wed, 14 Mar 2018 17:43:12 +1030 Subject: ARM: dts: aspeed: Add default memory node When we removed the inclusion of skeleton.dtsi from the device trees, we broke booting for systems with bootloaders that aren't device tre aware. This can be seen, for example, when appending the device tree blob to the kernel image. The reason booting broke was that the kernel lacked the device_type label in the memory node. Add in a default memory node wth the device_type. It can contain the memory address as the location is fixed for each SoC generation, but the size needs to be added by the bootloader or the board specific dts. Fixes: 73102d6fdc32 ("ARM: dts: aspeed: Remove skeleton.dtsi") Cc: Reported-by: Benjamin Herrenschmidt Signed-off-by: Joel Stanley Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/aspeed-g4.dtsi | 5 +++++ arch/arm/boot/dts/aspeed-g5.dtsi | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index b0d8431a3700..ae2b8c952e80 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -42,6 +42,11 @@ }; }; + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 40de3b66c33f..2477ebc11d9d 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -42,6 +42,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From e4b79900222b8cccd4da4a7a89581f0e1b764ed2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 13 Mar 2018 15:58:11 +1100 Subject: powerpc/64s: Fix NULL AT_BASE_PLATFORM when using DT CPU features When running virtualised the powerpc kernel is able to run the system in "compat mode" - which means the kernel and hardware are pretending to userspace that the CPU is an older version than it actually is. AT_BASE_PLATFORM is an AUXV entry that we export to userspace for use when we're running in that mode, which tells userspace the "platform" string for the real CPU version, as opposed to the faked version. Although we don't support compat mode when using DT CPU features, and arguably don't need to set AT_BASE_PLATFORM, the existing cputable based code always sets it even when we're running bare metal. That means the lack of AT_BASE_PLATFORM is a user-visible artifact of the fact that the kernel is using DT CPU features, which we don't want. So set it in the DT CPU features code also. This results in eg: $ LD_SHOW_AUXV=1 /bin/true | grep "AT_.*PLATFORM" AT_PLATFORM: power9 AT_BASE_PLATFORM:power9 Signed-off-by: Michael Ellerman Reviewed-by: Nicholas Piggin --- arch/powerpc/kernel/dt_cpu_ftrs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c index 945e2c29ad2d..0bcfb0f256e1 100644 --- a/arch/powerpc/kernel/dt_cpu_ftrs.c +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c @@ -720,6 +720,9 @@ static void __init cpufeatures_setup_finished(void) cur_cpu_spec->cpu_features |= CPU_FTR_HVMODE; } + /* Make sure powerpc_base_platform is non-NULL */ + powerpc_base_platform = cur_cpu_spec->platform; + system_registers.lpcr = mfspr(SPRN_LPCR); system_registers.hfscr = mfspr(SPRN_HFSCR); system_registers.fscr = mfspr(SPRN_FSCR); -- cgit v1.2.3 From 8b834bff1b73dce46f4e9f5e84af6f73fed8b0ef Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:39 +0800 Subject: scsi: hpsa: fix selection of reply queue Since commit 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") we could end up with an MSI-X vector that did not have any online CPUs mapped. This would lead to I/O hangs since there was no CPU to receive the completion. Retrieve IRQ affinity information using pci_irq_get_affinity() and use this mapping to choose a reply queue. [mkp: tweaked commit desc] Cc: Hannes Reinecke Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Laurence Oberman Cc: Meelis Roos Cc: Artem Bityutskiy Cc: Mike Snitzer Fixes: 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") Signed-off-by: Ming Lei Tested-by: Laurence Oberman Tested-by: Don Brace Tested-by: Artem Bityutskiy Acked-by: Don Brace Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa.c | 73 +++++++++++++++++++++++++++++++++++++++-------------- drivers/scsi/hpsa.h | 1 + 2 files changed, 55 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 87b260e403ec..31423b6dc26d 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1045,11 +1045,7 @@ static void set_performant_mode(struct ctlr_info *h, struct CommandList *c, c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); if (unlikely(!h->msix_vectors)) return; - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - c->Header.ReplyQueue = - raw_smp_processor_id() % h->nreply_queues; - else - c->Header.ReplyQueue = reply_queue % h->nreply_queues; + c->Header.ReplyQueue = reply_queue; } } @@ -1063,10 +1059,7 @@ static void set_ioaccel1_performant_mode(struct ctlr_info *h, * Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - cp->ReplyQueue = smp_processor_id() % h->nreply_queues; - else - cp->ReplyQueue = reply_queue % h->nreply_queues; + cp->ReplyQueue = reply_queue; /* * Set the bits in the address sent down to include: * - performant mode bit (bit 0) @@ -1087,10 +1080,7 @@ static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h, /* Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - cp->reply_queue = smp_processor_id() % h->nreply_queues; - else - cp->reply_queue = reply_queue % h->nreply_queues; + cp->reply_queue = reply_queue; /* Set the bits in the address sent down to include: * - performant mode bit not used in ioaccel mode 2 * - pull count (bits 0-3) @@ -1109,10 +1099,7 @@ static void set_ioaccel2_performant_mode(struct ctlr_info *h, * Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - cp->reply_queue = smp_processor_id() % h->nreply_queues; - else - cp->reply_queue = reply_queue % h->nreply_queues; + cp->reply_queue = reply_queue; /* * Set the bits in the address sent down to include: * - performant mode bit not used in ioaccel mode 2 @@ -1157,6 +1144,8 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h, { dial_down_lockup_detection_during_fw_flash(h, c); atomic_inc(&h->commands_outstanding); + + reply_queue = h->reply_map[raw_smp_processor_id()]; switch (c->cmd_type) { case CMD_IOACCEL1: set_ioaccel1_performant_mode(h, c, reply_queue); @@ -7376,6 +7365,26 @@ static void hpsa_disable_interrupt_mode(struct ctlr_info *h) h->msix_vectors = 0; } +static void hpsa_setup_reply_map(struct ctlr_info *h) +{ + const struct cpumask *mask; + unsigned int queue, cpu; + + for (queue = 0; queue < h->msix_vectors; queue++) { + mask = pci_irq_get_affinity(h->pdev, queue); + if (!mask) + goto fallback; + + for_each_cpu(cpu, mask) + h->reply_map[cpu] = queue; + } + return; + +fallback: + for_each_possible_cpu(cpu) + h->reply_map[cpu] = 0; +} + /* If MSI/MSI-X is supported by the kernel we will try to enable it on * controllers that are capable. If not, we use legacy INTx mode. */ @@ -7771,6 +7780,10 @@ static int hpsa_pci_init(struct ctlr_info *h) err = hpsa_interrupt_mode(h); if (err) goto clean1; + + /* setup mapping between CPU and reply queue */ + hpsa_setup_reply_map(h); + err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr); if (err) goto clean2; /* intmode+region, pci */ @@ -8480,6 +8493,28 @@ static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h, return wq; } +static void hpda_free_ctlr_info(struct ctlr_info *h) +{ + kfree(h->reply_map); + kfree(h); +} + +static struct ctlr_info *hpda_alloc_ctlr_info(void) +{ + struct ctlr_info *h; + + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return NULL; + + h->reply_map = kzalloc(sizeof(*h->reply_map) * nr_cpu_ids, GFP_KERNEL); + if (!h->reply_map) { + kfree(h); + return NULL; + } + return h; +} + static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int dac, rc; @@ -8517,7 +8552,7 @@ reinit_after_soft_reset: * the driver. See comments in hpsa.h for more info. */ BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT); - h = kzalloc(sizeof(*h), GFP_KERNEL); + h = hpda_alloc_ctlr_info(); if (!h) { dev_err(&pdev->dev, "Failed to allocate controller head\n"); return -ENOMEM; @@ -8916,7 +8951,7 @@ static void hpsa_remove_one(struct pci_dev *pdev) h->lockup_detected = NULL; /* init_one 2 */ /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */ - kfree(h); /* init_one 1 */ + hpda_free_ctlr_info(h); /* init_one 1 */ } static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 018f980a701c..fb9f5e7f8209 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -158,6 +158,7 @@ struct bmic_controller_parameters { #pragma pack() struct ctlr_info { + unsigned int *reply_map; int ctlr; char devname[8]; char *product_name; -- cgit v1.2.3 From adbe552349f2d1e48357a00e564d26135e586634 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:40 +0800 Subject: scsi: megaraid_sas: fix selection of reply queue Since commit 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") we could end up with an MSI-X vector that did not have any online CPUs mapped. This would lead to I/O hangs since there was no CPU to receive the completion. Retrieve IRQ affinity information using pci_irq_get_affinity() and use this mapping to choose a reply queue. [mkp: tweaked commit desc] Cc: Hannes Reinecke Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Laurence Oberman Cc: Mike Snitzer Cc: Meelis Roos Cc: Artem Bityutskiy Fixes: 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") Signed-off-by: Ming Lei Acked-by: Kashyap Desai Tested-by: Kashyap Desai Reviewed-by: Christoph Hellwig Tested-by: Artem Bityutskiy Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas.h | 1 + drivers/scsi/megaraid/megaraid_sas_base.c | 39 ++++++++++++++++++++++++++--- drivers/scsi/megaraid/megaraid_sas_fusion.c | 12 +++------ 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index ba6503f37756..27fab8235ea5 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -2128,6 +2128,7 @@ enum MR_PD_TYPE { struct megasas_instance { + unsigned int *reply_map; __le32 *producer; dma_addr_t producer_h; __le32 *consumer; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 0f1d88f272be..7b2bed5ab04c 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -5165,6 +5165,26 @@ skip_alloc: instance->use_seqnum_jbod_fp = false; } +static void megasas_setup_reply_map(struct megasas_instance *instance) +{ + const struct cpumask *mask; + unsigned int queue, cpu; + + for (queue = 0; queue < instance->msix_vectors; queue++) { + mask = pci_irq_get_affinity(instance->pdev, queue); + if (!mask) + goto fallback; + + for_each_cpu(cpu, mask) + instance->reply_map[cpu] = queue; + } + return; + +fallback: + for_each_possible_cpu(cpu) + instance->reply_map[cpu] = cpu % instance->msix_vectors; +} + /** * megasas_init_fw - Initializes the FW * @instance: Adapter soft state @@ -5343,6 +5363,8 @@ static int megasas_init_fw(struct megasas_instance *instance) goto fail_setup_irqs; } + megasas_setup_reply_map(instance); + dev_info(&instance->pdev->dev, "firmware supports msix\t: (%d)", fw_msix_count); dev_info(&instance->pdev->dev, @@ -6123,20 +6145,29 @@ static inline int megasas_alloc_mfi_ctrl_mem(struct megasas_instance *instance) */ static int megasas_alloc_ctrl_mem(struct megasas_instance *instance) { + instance->reply_map = kzalloc(sizeof(unsigned int) * nr_cpu_ids, + GFP_KERNEL); + if (!instance->reply_map) + return -ENOMEM; + switch (instance->adapter_type) { case MFI_SERIES: if (megasas_alloc_mfi_ctrl_mem(instance)) - return -ENOMEM; + goto fail; break; case VENTURA_SERIES: case THUNDERBOLT_SERIES: case INVADER_SERIES: if (megasas_alloc_fusion_context(instance)) - return -ENOMEM; + goto fail; break; } return 0; + fail: + kfree(instance->reply_map); + instance->reply_map = NULL; + return -ENOMEM; } /* @@ -6148,6 +6179,7 @@ static int megasas_alloc_ctrl_mem(struct megasas_instance *instance) */ static inline void megasas_free_ctrl_mem(struct megasas_instance *instance) { + kfree(instance->reply_map); if (instance->adapter_type == MFI_SERIES) { if (instance->producer) pci_free_consistent(instance->pdev, sizeof(u32), @@ -6540,7 +6572,6 @@ fail_io_attach: pci_free_irq_vectors(instance->pdev); fail_init_mfi: scsi_host_put(host); - fail_alloc_instance: pci_disable_device(pdev); @@ -6746,6 +6777,8 @@ megasas_resume(struct pci_dev *pdev) if (rval < 0) goto fail_reenable_msix; + megasas_setup_reply_map(instance); + if (instance->adapter_type != MFI_SERIES) { megasas_reset_reply_desc(instance); if (megasas_ioc_init_fusion(instance)) { diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index dc8e850fbfd2..5ec3b74e8aed 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -2641,11 +2641,8 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, fp_possible = (io_info.fpOkForIo > 0) ? true : false; } - /* Use raw_smp_processor_id() for now until cmd->request->cpu is CPU - id by default, not CPU group id, otherwise all MSI-X queues won't - be utilized */ - cmd->request_desc->SCSIIO.MSIxIndex = instance->msix_vectors ? - raw_smp_processor_id() % instance->msix_vectors : 0; + cmd->request_desc->SCSIIO.MSIxIndex = + instance->reply_map[raw_smp_processor_id()]; praid_context = &io_request->RaidContext; @@ -2971,10 +2968,9 @@ megasas_build_syspd_fusion(struct megasas_instance *instance, } cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle; - cmd->request_desc->SCSIIO.MSIxIndex = - instance->msix_vectors ? - (raw_smp_processor_id() % instance->msix_vectors) : 0; + cmd->request_desc->SCSIIO.MSIxIndex = + instance->reply_map[raw_smp_processor_id()]; if (!fp_possible) { /* system pd firmware path */ -- cgit v1.2.3 From 2f31115e940c4afd49b99c33123534e2ac924ffb Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:41 +0800 Subject: scsi: core: introduce force_blk_mq This patch introduces 'force_blk_mq' to the scsi_host_template so that drivers that have no desire to support the legacy I/O path can signal blk-mq only support. [mkp: commit desc] Cc: Omar Sandoval , Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Mike Snitzer Cc: Laurence Oberman Signed-off-by: Ming Lei Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/hosts.c | 1 + include/scsi/scsi_host.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index dd9464920456..ef22b275d050 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -474,6 +474,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->dma_boundary = 0xffffffff; shost->use_blk_mq = scsi_use_blk_mq; + shost->use_blk_mq = scsi_use_blk_mq || shost->hostt->force_blk_mq; device_initialize(&shost->shost_gendev); dev_set_name(&shost->shost_gendev, "host%d", shost->host_no); diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index a8b7bf879ced..9c1e4bad6581 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -452,6 +452,9 @@ struct scsi_host_template { /* True if the controller does not support WRITE SAME */ unsigned no_write_same:1; + /* True if the low-level driver supports blk-mq only */ + unsigned force_blk_mq:1; + /* * Countdown for host blocking with no commands outstanding. */ -- cgit v1.2.3 From b5b6e8c8d3b4cbeb447a0f10c7d5de3caa573299 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:42 +0800 Subject: scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity Since commit 84676c1f21e8ff5 ("genirq/affinity: assign vectors to all possible CPUs") it is possible to end up in a scenario where only offline CPUs are mapped to an interrupt vector. This is only an issue for the legacy I/O path since with blk-mq/scsi-mq an I/O can't be submitted to a hardware queue if the queue isn't mapped to an online CPU. Fix this issue by forcing virtio-scsi to use blk-mq. [mkp: commit desc] Cc: Omar Sandoval , Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Paolo Bonzini Cc: Mike Snitzer Cc: Laurence Oberman Fixes: 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") Signed-off-by: Ming Lei Reviewed-by: Hannes Reinecke Acked-by: Paolo Bonzini Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/virtio_scsi.c | 59 +++------------------------------------------- 1 file changed, 3 insertions(+), 56 deletions(-) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 7c28e8d4955a..54e3a0f6844c 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -91,9 +91,6 @@ struct virtio_scsi_vq { struct virtio_scsi_target_state { seqcount_t tgt_seq; - /* Count of outstanding requests. */ - atomic_t reqs; - /* Currently active virtqueue for requests sent to this target. */ struct virtio_scsi_vq *req_vq; }; @@ -152,8 +149,6 @@ static void virtscsi_complete_cmd(struct virtio_scsi *vscsi, void *buf) struct virtio_scsi_cmd *cmd = buf; struct scsi_cmnd *sc = cmd->sc; struct virtio_scsi_cmd_resp *resp = &cmd->resp.cmd; - struct virtio_scsi_target_state *tgt = - scsi_target(sc->device)->hostdata; dev_dbg(&sc->device->sdev_gendev, "cmd %p response %u status %#02x sense_len %u\n", @@ -210,8 +205,6 @@ static void virtscsi_complete_cmd(struct virtio_scsi *vscsi, void *buf) } sc->scsi_done(sc); - - atomic_dec(&tgt->reqs); } static void virtscsi_vq_done(struct virtio_scsi *vscsi, @@ -580,10 +573,7 @@ static int virtscsi_queuecommand_single(struct Scsi_Host *sh, struct scsi_cmnd *sc) { struct virtio_scsi *vscsi = shost_priv(sh); - struct virtio_scsi_target_state *tgt = - scsi_target(sc->device)->hostdata; - atomic_inc(&tgt->reqs); return virtscsi_queuecommand(vscsi, &vscsi->req_vqs[0], sc); } @@ -596,55 +586,11 @@ static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi, return &vscsi->req_vqs[hwq]; } -static struct virtio_scsi_vq *virtscsi_pick_vq(struct virtio_scsi *vscsi, - struct virtio_scsi_target_state *tgt) -{ - struct virtio_scsi_vq *vq; - unsigned long flags; - u32 queue_num; - - local_irq_save(flags); - if (atomic_inc_return(&tgt->reqs) > 1) { - unsigned long seq; - - do { - seq = read_seqcount_begin(&tgt->tgt_seq); - vq = tgt->req_vq; - } while (read_seqcount_retry(&tgt->tgt_seq, seq)); - } else { - /* no writes can be concurrent because of atomic_t */ - write_seqcount_begin(&tgt->tgt_seq); - - /* keep previous req_vq if a reader just arrived */ - if (unlikely(atomic_read(&tgt->reqs) > 1)) { - vq = tgt->req_vq; - goto unlock; - } - - queue_num = smp_processor_id(); - while (unlikely(queue_num >= vscsi->num_queues)) - queue_num -= vscsi->num_queues; - tgt->req_vq = vq = &vscsi->req_vqs[queue_num]; - unlock: - write_seqcount_end(&tgt->tgt_seq); - } - local_irq_restore(flags); - - return vq; -} - static int virtscsi_queuecommand_multi(struct Scsi_Host *sh, struct scsi_cmnd *sc) { struct virtio_scsi *vscsi = shost_priv(sh); - struct virtio_scsi_target_state *tgt = - scsi_target(sc->device)->hostdata; - struct virtio_scsi_vq *req_vq; - - if (shost_use_blk_mq(sh)) - req_vq = virtscsi_pick_vq_mq(vscsi, sc); - else - req_vq = virtscsi_pick_vq(vscsi, tgt); + struct virtio_scsi_vq *req_vq = virtscsi_pick_vq_mq(vscsi, sc); return virtscsi_queuecommand(vscsi, req_vq, sc); } @@ -775,7 +721,6 @@ static int virtscsi_target_alloc(struct scsi_target *starget) return -ENOMEM; seqcount_init(&tgt->tgt_seq); - atomic_set(&tgt->reqs, 0); tgt->req_vq = &vscsi->req_vqs[0]; starget->hostdata = tgt; @@ -823,6 +768,7 @@ static struct scsi_host_template virtscsi_host_template_single = { .target_alloc = virtscsi_target_alloc, .target_destroy = virtscsi_target_destroy, .track_queue_depth = 1, + .force_blk_mq = 1, }; static struct scsi_host_template virtscsi_host_template_multi = { @@ -844,6 +790,7 @@ static struct scsi_host_template virtscsi_host_template_multi = { .target_destroy = virtscsi_target_destroy, .map_queues = virtscsi_map_queues, .track_queue_depth = 1, + .force_blk_mq = 1, }; #define virtscsi_config_get(vdev, fld) \ -- cgit v1.2.3 From c3506df85091ab41cf7716244c460e15136100c4 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:43 +0800 Subject: scsi: virtio_scsi: unify scsi_host_template Now that virtio_scsi uses blk-mq exclusively, we can remove the scsi_host_template and associated plumbing for the legacy I/O path. [mkp: commit desc] Cc: Omar Sandoval , Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Paolo Bonzini Cc: Mike Snitzer Cc: Laurence Oberman Cc: Hannes Reinecke Signed-off-by: Ming Lei Suggested-by: Christoph Hellwig , Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/virtio_scsi.c | 74 ++++++++++------------------------------------ 1 file changed, 15 insertions(+), 59 deletions(-) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 54e3a0f6844c..45d04631888a 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -522,11 +522,20 @@ static void virtio_scsi_init_hdr_pi(struct virtio_device *vdev, } #endif -static int virtscsi_queuecommand(struct virtio_scsi *vscsi, - struct virtio_scsi_vq *req_vq, +static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi, + struct scsi_cmnd *sc) +{ + u32 tag = blk_mq_unique_tag(sc->request); + u16 hwq = blk_mq_unique_tag_to_hwq(tag); + + return &vscsi->req_vqs[hwq]; +} + +static int virtscsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc) { - struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); + struct virtio_scsi *vscsi = shost_priv(shost); + struct virtio_scsi_vq *req_vq = virtscsi_pick_vq_mq(vscsi, sc); struct virtio_scsi_cmd *cmd = scsi_cmd_priv(sc); unsigned long flags; int req_size; @@ -569,32 +578,6 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi, return 0; } -static int virtscsi_queuecommand_single(struct Scsi_Host *sh, - struct scsi_cmnd *sc) -{ - struct virtio_scsi *vscsi = shost_priv(sh); - - return virtscsi_queuecommand(vscsi, &vscsi->req_vqs[0], sc); -} - -static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi, - struct scsi_cmnd *sc) -{ - u32 tag = blk_mq_unique_tag(sc->request); - u16 hwq = blk_mq_unique_tag_to_hwq(tag); - - return &vscsi->req_vqs[hwq]; -} - -static int virtscsi_queuecommand_multi(struct Scsi_Host *sh, - struct scsi_cmnd *sc) -{ - struct virtio_scsi *vscsi = shost_priv(sh); - struct virtio_scsi_vq *req_vq = virtscsi_pick_vq_mq(vscsi, sc); - - return virtscsi_queuecommand(vscsi, req_vq, sc); -} - static int virtscsi_tmf(struct virtio_scsi *vscsi, struct virtio_scsi_cmd *cmd) { DECLARE_COMPLETION_ONSTACK(comp); @@ -750,34 +733,13 @@ static enum blk_eh_timer_return virtscsi_eh_timed_out(struct scsi_cmnd *scmnd) return BLK_EH_RESET_TIMER; } -static struct scsi_host_template virtscsi_host_template_single = { - .module = THIS_MODULE, - .name = "Virtio SCSI HBA", - .proc_name = "virtio_scsi", - .this_id = -1, - .cmd_size = sizeof(struct virtio_scsi_cmd), - .queuecommand = virtscsi_queuecommand_single, - .change_queue_depth = virtscsi_change_queue_depth, - .eh_abort_handler = virtscsi_abort, - .eh_device_reset_handler = virtscsi_device_reset, - .eh_timed_out = virtscsi_eh_timed_out, - .slave_alloc = virtscsi_device_alloc, - - .dma_boundary = UINT_MAX, - .use_clustering = ENABLE_CLUSTERING, - .target_alloc = virtscsi_target_alloc, - .target_destroy = virtscsi_target_destroy, - .track_queue_depth = 1, - .force_blk_mq = 1, -}; - -static struct scsi_host_template virtscsi_host_template_multi = { +static struct scsi_host_template virtscsi_host_template = { .module = THIS_MODULE, .name = "Virtio SCSI HBA", .proc_name = "virtio_scsi", .this_id = -1, .cmd_size = sizeof(struct virtio_scsi_cmd), - .queuecommand = virtscsi_queuecommand_multi, + .queuecommand = virtscsi_queuecommand, .change_queue_depth = virtscsi_change_queue_depth, .eh_abort_handler = virtscsi_abort, .eh_device_reset_handler = virtscsi_device_reset, @@ -883,7 +845,6 @@ static int virtscsi_probe(struct virtio_device *vdev) u32 sg_elems, num_targets; u32 cmd_per_lun; u32 num_queues; - struct scsi_host_template *hostt; if (!vdev->config->get) { dev_err(&vdev->dev, "%s failure: config access disabled\n", @@ -896,12 +857,7 @@ static int virtscsi_probe(struct virtio_device *vdev) num_targets = virtscsi_config_get(vdev, max_target) + 1; - if (num_queues == 1) - hostt = &virtscsi_host_template_single; - else - hostt = &virtscsi_host_template_multi; - - shost = scsi_host_alloc(hostt, + shost = scsi_host_alloc(&virtscsi_host_template, sizeof(*vscsi) + sizeof(vscsi->req_vqs[0]) * num_queues); if (!shost) return -ENOMEM; -- cgit v1.2.3 From 09dd15e0d9547ca424de4043bcd429bab6f285c8 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 14 Mar 2018 17:13:39 -0500 Subject: scsi: ibmvfc: Avoid unnecessary port relogin Following an RSCN, ibmvfc will issue an ADISC to determine if the underlying target has changed, comparing the SCSI ID, WWPN, and WWNN to determine how to handle the rport in discovery. However, the comparison of the WWPN and WWNN was performing a memcmp between a big endian field against a CPU endian field, which resulted in the wrong answer on LE systems. This was observed as unexpected errors getting logged at boot time as targets were getting relogins when not needed. Signed-off-by: Brian King Signed-off-by: Martin K. Petersen --- drivers/scsi/ibmvscsi/ibmvfc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index b1b1d3a3b173..daefe8172b04 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -3579,11 +3579,9 @@ static void ibmvfc_tgt_implicit_logout(struct ibmvfc_target *tgt) static int ibmvfc_adisc_needs_plogi(struct ibmvfc_passthru_mad *mad, struct ibmvfc_target *tgt) { - if (memcmp(&mad->fc_iu.response[2], &tgt->ids.port_name, - sizeof(tgt->ids.port_name))) + if (wwn_to_u64((u8 *)&mad->fc_iu.response[2]) != tgt->ids.port_name) return 1; - if (memcmp(&mad->fc_iu.response[4], &tgt->ids.node_name, - sizeof(tgt->ids.node_name))) + if (wwn_to_u64((u8 *)&mad->fc_iu.response[4]) != tgt->ids.node_name) return 1; if (be32_to_cpu(mad->fc_iu.response[6]) != tgt->scsi_id) return 1; -- cgit v1.2.3 From 46c0ef6e1eb95f619d9f62da4332749153db92f7 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Fri, 16 Mar 2018 11:35:51 +0900 Subject: xfrm: fix rcu_read_unlock usage in xfrm_local_error In the xfrm_local_error, rcu_read_unlock should be called when afinfo is not NULL. because xfrm_state_get_afinfo calls rcu_read_unlock if afinfo is NULL. Fixes: af5d27c4e12b ("xfrm: remove xfrm_state_put_afinfo") Signed-off-by: Taehee Yoo Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_output.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index 23468672a767..89b178a78dc7 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -285,8 +285,9 @@ void xfrm_local_error(struct sk_buff *skb, int mtu) return; afinfo = xfrm_state_get_afinfo(proto); - if (afinfo) + if (afinfo) { afinfo->local_error(skb, mtu); - rcu_read_unlock(); + rcu_read_unlock(); + } } EXPORT_SYMBOL_GPL(xfrm_local_error); -- cgit v1.2.3 From e40bdb03d3cd7da66bd0bc1e40cbcfb49351265c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 17 Mar 2018 22:40:18 +0100 Subject: ALSA: hda/realtek - Always immediately update mute LED with pin VREF Some HP laptops have a mute mute LED controlled by a pin VREF. The Realtek codec driver updates the VREF via vmaster hook by calling snd_hda_set_pin_ctl_cache(). This works fine as long as the driver is running in a normal mode. However, when the VREF change happens during the codec being in runtime PM suspend, the regmap access will skip and postpone the actual register change. This ends up with the unchanged LED status until the next runtime PM resume even if you change the Master mute switch. (Interestingly, the machine keeps the LED status even after the codec goes into D3 -- but it's another story.) For improving this usability, let the driver temporarily powering up / down only during the pin VREF change. This can be achieved easily by wrapping the call with snd_hda_power_up_pm() / *_down_pm(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9af301c6bba2..5ef056f2aecc 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3596,8 +3596,12 @@ static void alc269_fixup_mic_mute_hook(void *private_data, int enabled) pinval = snd_hda_codec_get_pin_target(codec, spec->mute_led_nid); pinval &= ~AC_PINCTL_VREFEN; pinval |= enabled ? AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_80; - if (spec->mute_led_nid) + if (spec->mute_led_nid) { + /* temporarily power up/down for setting VREF */ + snd_hda_power_up_pm(codec); snd_hda_set_pin_ctl_cache(codec, spec->mute_led_nid, pinval); + snd_hda_power_down_pm(codec); + } } /* Make sure the led works even in runtime suspend */ -- cgit v1.2.3 From dd1df24737727e119c263acf1be2a92763938297 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 15 Mar 2018 17:16:27 +0100 Subject: vti4: Don't count header length twice on tunnel setup This re-introduces the effect of commit a32452366b72 ("vti4: Don't count header length twice.") which was accidentally reverted by merge commit f895f0cfbb77 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec"). The commit message from Steffen Klassert said: We currently count the size of LL_MAX_HEADER and struct iphdr twice for vti4 devices, this leads to a wrong device mtu. The size of LL_MAX_HEADER and struct iphdr is already counted in ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init(). And this is still the case now: ip_tunnel_bind_dev() already accounts for the header length of the link layer (not necessarily LL_MAX_HEADER, if the output device is found), plus one IP header. For example, with a vti device on top of veth, with MTU of 1500, the existing implementation would set the initial vti MTU to 1332, accounting once for LL_MAX_HEADER (128, included in hard_header_len by vti) and twice for the same IP header (once from hard_header_len, once from ip_tunnel_bind_dev()). It should instead be 1480, because ip_tunnel_bind_dev() is able to figure out that the output device is veth, so no additional link layer header is attached, and will properly count one single IP header. The existing issue had the side effect of avoiding PMTUD for most xfrm policies, by arbitrarily lowering the initial MTU. However, the only way to get a consistent PMTU value is to let the xfrm PMTU discovery do its course, and commit d6af1a31cc72 ("vti: Add pmtu handling to vti_xmit.") now takes care of local delivery cases where the application ignores local socket notifications. Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code") Fixes: f895f0cfbb77 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec") Signed-off-by: Stefano Brivio Acked-by: Sabrina Dubroca Signed-off-by: Steffen Klassert --- net/ipv4/ip_vti.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index 51b1669334fe..502e5222eaa9 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -387,7 +387,6 @@ static int vti_tunnel_init(struct net_device *dev) memcpy(dev->dev_addr, &iph->saddr, 4); memcpy(dev->broadcast, &iph->daddr, 4); - dev->hard_header_len = LL_MAX_HEADER + sizeof(struct iphdr); dev->mtu = ETH_DATA_LEN; dev->flags = IFF_NOARP; dev->addr_len = 4; -- cgit v1.2.3 From 24fc79798b8ddfd46f2dd363a8d29072c083b977 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 15 Mar 2018 17:16:28 +0100 Subject: ip_tunnel: Clamp MTU to bounds on new link Otherwise, it's possible to specify invalid MTU values directly on creation of a link (via 'ip link add'). This is already prevented on subsequent MTU changes by commit b96f9afee4eb ("ipv4/6: use core net MTU range checking"). Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Stefano Brivio Acked-by: Sabrina Dubroca Signed-off-by: Steffen Klassert --- net/ipv4/ip_tunnel.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index 6d21068f9b55..7c76dd17b6b9 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -1108,8 +1108,14 @@ int ip_tunnel_newlink(struct net_device *dev, struct nlattr *tb[], eth_hw_addr_random(dev); mtu = ip_tunnel_bind_dev(dev); - if (!tb[IFLA_MTU]) + if (tb[IFLA_MTU]) { + unsigned int max = 0xfff8 - dev->hard_header_len - nt->hlen; + + dev->mtu = clamp(dev->mtu, (unsigned int)ETH_MIN_MTU, + (unsigned int)(max - sizeof(struct iphdr))); + } else { dev->mtu = mtu; + } ip_tunnel_add(itn, nt); out: -- cgit v1.2.3 From 03080e5ec72740c1a62e6730f2a5f3f114f11b19 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 15 Mar 2018 17:16:29 +0100 Subject: vti4: Don't override MTU passed on link creation via IFLA_MTU Don't hardcode a MTU value on vti tunnel initialization, ip_tunnel_newlink() is able to deal with this already. See also commit ffc2b6ee4174 ("ip_gre: fix IFLA_MTU ignored on NEWLINK"). Fixes: 1181412c1a67 ("net/ipv4: VTI support new module for ip_vti.") Signed-off-by: Stefano Brivio Acked-by: Sabrina Dubroca Signed-off-by: Steffen Klassert --- net/ipv4/ip_vti.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index 502e5222eaa9..3f091ccad9af 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -387,7 +387,6 @@ static int vti_tunnel_init(struct net_device *dev) memcpy(dev->dev_addr, &iph->saddr, 4); memcpy(dev->broadcast, &iph->daddr, 4); - dev->mtu = ETH_DATA_LEN; dev->flags = IFF_NOARP; dev->addr_len = 4; dev->features |= NETIF_F_LLTX; -- cgit v1.2.3 From c6741fbed6dc0f183d26c4b6bca4517672f92e6c Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 15 Mar 2018 17:17:11 +0100 Subject: vti6: Properly adjust vti6 MTU from MTU of lower device If a lower device is found, we don't need to subtract LL_MAX_HEADER to calculate our MTU: just use its MTU, the link layer headers are already taken into account by it. If the lower device is not found, start from ETH_DATA_LEN instead, and only in this case subtract a worst-case LL_MAX_HEADER. We then need to subtract our additional IPv6 header from the calculation. While at it, note that vti6 doesn't have a hardware header, so it doesn't need to set dev->hard_header_len. And as vti6_link_config() now always sets the MTU, there's no need to set a default value in vti6_dev_setup(). This makes the behaviour consistent with IPv4 vti, after commit a32452366b72 ("vti4: Don't count header length twice."), which was accidentally reverted by merge commit f895f0cfbb77 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec"). While commit 53c81e95df17 ("ip6_vti: adjust vti mtu according to mtu of lower device") improved on the original situation, this was still not ideal. As reported in that commit message itself, if we start from an underlying veth MTU of 9000, we end up with an MTU of 8832, that is, 9000 - LL_MAX_HEADER - sizeof(ipv6hdr). This should simply be 8880, or 9000 - sizeof(ipv6hdr) instead: we found the lower device (veth) and we know we don't have any additional link layer header, so there's no need to subtract an hypothetical worst-case number. Fixes: 53c81e95df17 ("ip6_vti: adjust vti mtu according to mtu of lower device") Signed-off-by: Stefano Brivio Acked-by: Sabrina Dubroca Signed-off-by: Steffen Klassert --- net/ipv6/ip6_vti.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index fa3ae1cb50d3..2ceef41cc097 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -627,6 +627,7 @@ static void vti6_link_config(struct ip6_tnl *t) struct net_device *dev = t->dev; struct __ip6_tnl_parm *p = &t->parms; struct net_device *tdev = NULL; + int mtu; memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr)); memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr)); @@ -656,8 +657,11 @@ static void vti6_link_config(struct ip6_tnl *t) tdev = __dev_get_by_index(t->net, p->link); if (tdev) - dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len, - IPV6_MIN_MTU); + mtu = tdev->mtu - sizeof(struct ipv6hdr); + else + mtu = ETH_DATA_LEN - LL_MAX_HEADER - sizeof(struct ipv6hdr); + + dev->mtu = max_t(int, mtu, IPV6_MIN_MTU); } /** @@ -866,8 +870,6 @@ static void vti6_dev_setup(struct net_device *dev) dev->priv_destructor = vti6_dev_free; dev->type = ARPHRD_TUNNEL6; - dev->hard_header_len = LL_MAX_HEADER + sizeof(struct ipv6hdr); - dev->mtu = ETH_DATA_LEN; dev->min_mtu = IPV6_MIN_MTU; dev->max_mtu = IP_MAX_MTU; dev->flags |= IFF_NOARP; -- cgit v1.2.3 From 7a67e69a339a6824be2fc483073782ab2f47fcd2 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 15 Mar 2018 17:17:12 +0100 Subject: vti6: Keep set MTU on link creation or change, validate it In vti6_link_config(), if MTU is already given on link creation or change, validate and use it instead of recomputing it. To do that, we need to propagate the knowledge that MTU was set by userspace all the way down to vti6_link_config(). To keep this simple, vti6_dev_init() sets the new 'keep_mtu' argument of vti6_link_config() to true: on initialization, we don't have convenient access to netlink attributes there, but we will anyway check whether dev->mtu is set in vti6_link_config(). If it's non-zero, it was set to the value of the IFLA_MTU attribute during creation. Otherwise, determine a reasonable value. Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Fixes: 53c81e95df17 ("ip6_vti: adjust vti mtu according to mtu of lower device") Signed-off-by: Stefano Brivio Acked-by: Sabrina Dubroca Signed-off-by: Steffen Klassert --- net/ipv6/ip6_vti.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index 2ceef41cc097..971175142e14 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -622,7 +622,7 @@ static int vti6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, return 0; } -static void vti6_link_config(struct ip6_tnl *t) +static void vti6_link_config(struct ip6_tnl *t, bool keep_mtu) { struct net_device *dev = t->dev; struct __ip6_tnl_parm *p = &t->parms; @@ -641,6 +641,11 @@ static void vti6_link_config(struct ip6_tnl *t) else dev->flags &= ~IFF_POINTOPOINT; + if (keep_mtu && dev->mtu) { + dev->mtu = clamp(dev->mtu, dev->min_mtu, dev->max_mtu); + return; + } + if (p->flags & IP6_TNL_F_CAP_XMIT) { int strict = (ipv6_addr_type(&p->raddr) & (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL)); @@ -668,12 +673,14 @@ static void vti6_link_config(struct ip6_tnl *t) * vti6_tnl_change - update the tunnel parameters * @t: tunnel to be changed * @p: tunnel configuration parameters + * @keep_mtu: MTU was set from userspace, don't re-compute it * * Description: * vti6_tnl_change() updates the tunnel parameters **/ static int -vti6_tnl_change(struct ip6_tnl *t, const struct __ip6_tnl_parm *p) +vti6_tnl_change(struct ip6_tnl *t, const struct __ip6_tnl_parm *p, + bool keep_mtu) { t->parms.laddr = p->laddr; t->parms.raddr = p->raddr; @@ -683,11 +690,12 @@ vti6_tnl_change(struct ip6_tnl *t, const struct __ip6_tnl_parm *p) t->parms.proto = p->proto; t->parms.fwmark = p->fwmark; dst_cache_reset(&t->dst_cache); - vti6_link_config(t); + vti6_link_config(t, keep_mtu); return 0; } -static int vti6_update(struct ip6_tnl *t, struct __ip6_tnl_parm *p) +static int vti6_update(struct ip6_tnl *t, struct __ip6_tnl_parm *p, + bool keep_mtu) { struct net *net = dev_net(t->dev); struct vti6_net *ip6n = net_generic(net, vti6_net_id); @@ -695,7 +703,7 @@ static int vti6_update(struct ip6_tnl *t, struct __ip6_tnl_parm *p) vti6_tnl_unlink(ip6n, t); synchronize_net(); - err = vti6_tnl_change(t, p); + err = vti6_tnl_change(t, p, keep_mtu); vti6_tnl_link(ip6n, t); netdev_state_change(t->dev); return err; @@ -808,7 +816,7 @@ vti6_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } else t = netdev_priv(dev); - err = vti6_update(t, &p1); + err = vti6_update(t, &p1, false); } if (t) { err = 0; @@ -907,7 +915,7 @@ static int vti6_dev_init(struct net_device *dev) if (err) return err; - vti6_link_config(t); + vti6_link_config(t, true); return 0; } @@ -1012,7 +1020,7 @@ static int vti6_changelink(struct net_device *dev, struct nlattr *tb[], } else t = netdev_priv(dev); - return vti6_update(t, &p); + return vti6_update(t, &p, tb && tb[IFLA_MTU]); } static size_t vti6_get_size(const struct net_device *dev) -- cgit v1.2.3 From f8a554b4aa9686bb2c12f6bae516e58783289a03 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Thu, 15 Mar 2018 17:17:13 +0100 Subject: vti6: Fix dev->max_mtu setting We shouldn't allow a tunnel to have IP_MAX_MTU as MTU, because another IPv6 header is going on top of our packets. Without this patch, we might end up building packets bigger than IP_MAX_MTU. Fixes: b96f9afee4eb ("ipv4/6: use core net MTU range checking") Signed-off-by: Stefano Brivio Acked-by: Sabrina Dubroca Signed-off-by: Steffen Klassert --- net/ipv6/ip6_vti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index 971175142e14..ce18cd20389d 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -879,7 +879,7 @@ static void vti6_dev_setup(struct net_device *dev) dev->type = ARPHRD_TUNNEL6; dev->min_mtu = IPV6_MIN_MTU; - dev->max_mtu = IP_MAX_MTU; + dev->max_mtu = IP_MAX_MTU - sizeof(struct ipv6hdr); dev->flags |= IFF_NOARP; dev->addr_len = sizeof(struct in6_addr); netif_keep_dst(dev); -- cgit v1.2.3 From 4b0b37d4cc54b21a6ecad7271cbc850555869c62 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Sat, 17 Mar 2018 08:25:07 -0700 Subject: selftests/x86/ptrace_syscall: Fix for yet more glibc interference glibc keeps getting cleverer, and my version now turns raise() into more than one syscall. Since the test relies on ptrace seeing an exact set of syscalls, this breaks the test. Replace raise(SIGSTOP) with syscall(SYS_tgkill, ...) to force glibc to get out of our way. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.org Signed-off-by: Ingo Molnar --- tools/testing/selftests/x86/ptrace_syscall.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/x86/ptrace_syscall.c b/tools/testing/selftests/x86/ptrace_syscall.c index 1ae1c5a7392e..6f22238f3217 100644 --- a/tools/testing/selftests/x86/ptrace_syscall.c +++ b/tools/testing/selftests/x86/ptrace_syscall.c @@ -183,8 +183,10 @@ static void test_ptrace_syscall_restart(void) if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0) err(1, "PTRACE_TRACEME"); + pid_t pid = getpid(), tid = syscall(SYS_gettid); + printf("\tChild will make one syscall\n"); - raise(SIGSTOP); + syscall(SYS_tgkill, pid, tid, SIGSTOP); syscall(SYS_gettid, 10, 11, 12, 13, 14, 15); _exit(0); @@ -301,9 +303,11 @@ static void test_restart_under_ptrace(void) if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0) err(1, "PTRACE_TRACEME"); + pid_t pid = getpid(), tid = syscall(SYS_gettid); + printf("\tChild will take a nap until signaled\n"); setsigign(SIGUSR1, SA_RESTART); - raise(SIGSTOP); + syscall(SYS_tgkill, pid, tid, SIGSTOP); syscall(SYS_pause, 0, 0, 0, 0, 0, 0); _exit(0); -- cgit v1.2.3 From 6de564939e14327148e31ddcf769e34105176447 Mon Sep 17 00:00:00 2001 From: OuYang ZhiZhong Date: Sun, 11 Mar 2018 15:59:07 +0800 Subject: mtdchar: fix usage of mtd_ooblayout_ecc() Section was not properly computed. The value of OOB region definition is always ECC section 0 information in the OOB area, but we want to get all the ECC bytes information, so we should call mtd_ooblayout_ecc(mtd, section++, &oobregion) until it returns -ERANGE. Fixes: c2b78452a9db ("mtd: use mtd_ooblayout_xxx() helpers where appropriate") Cc: Signed-off-by: OuYang ZhiZhong Signed-off-by: Boris Brezillon --- drivers/mtd/mtdchar.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index de8c902059b8..7d80a8bb96fe 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -479,7 +479,7 @@ static int shrink_ecclayout(struct mtd_info *mtd, for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) { u32 eccpos; - ret = mtd_ooblayout_ecc(mtd, section, &oobregion); + ret = mtd_ooblayout_ecc(mtd, section++, &oobregion); if (ret < 0) { if (ret != -ERANGE) return ret; @@ -526,7 +526,7 @@ static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to) for (i = 0; i < ARRAY_SIZE(to->eccpos);) { u32 eccpos; - ret = mtd_ooblayout_ecc(mtd, section, &oobregion); + ret = mtd_ooblayout_ecc(mtd, section++, &oobregion); if (ret < 0) { if (ret != -ERANGE) return ret; -- cgit v1.2.3 From 4c41aa24baa4ed338241d05494f2c595c885af8f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 19 Mar 2018 14:07:45 +0300 Subject: staging: ncpfs: memory corruption in ncp_read_kernel() If the server is malicious then *bytes_read could be larger than the size of the "target" buffer. It would lead to memory corruption when we do the memcpy(). Reported-by: Dr Silvio Cesare of InfoSect Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ncpfs/ncplib_kernel.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/staging/ncpfs/ncplib_kernel.c b/drivers/staging/ncpfs/ncplib_kernel.c index 804adfebba2f..3e047eb4cc7c 100644 --- a/drivers/staging/ncpfs/ncplib_kernel.c +++ b/drivers/staging/ncpfs/ncplib_kernel.c @@ -981,6 +981,10 @@ ncp_read_kernel(struct ncp_server *server, const char *file_id, goto out; } *bytes_read = ncp_reply_be16(server, 0); + if (*bytes_read > to_read) { + result = -EINVAL; + goto out; + } source = ncp_reply_data(server, 2 + (offset & 1)); memcpy(target, source, *bytes_read); -- cgit v1.2.3 From a6618f4aedb2b60932d766bd82ae7ce866e842aa Mon Sep 17 00:00:00 2001 From: Kirill Marinushkin Date: Mon, 19 Mar 2018 07:11:08 +0100 Subject: ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin Cc: Signed-off-by: Takashi Iwai --- include/uapi/linux/usb/audio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h index 17a022c5b414..da3315ed1bcd 100644 --- a/include/uapi/linux/usb/audio.h +++ b/include/uapi/linux/usb/audio.h @@ -370,7 +370,7 @@ static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_d { return (protocol == UAC_VERSION_1) ? desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; + 2; /* in UAC2, this value is constant */ } static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, @@ -378,7 +378,7 @@ static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_de { return (protocol == UAC_VERSION_1) ? &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; + &desc->baSourceID[desc->bNrInPins + 6]; } static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, -- cgit v1.2.3 From 597d74005ba85e87c256cd732128ebf7faf54247 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 14 Mar 2018 12:15:56 -0400 Subject: scsi: sd: Remember that READ CAPACITY(16) succeeded The USB storage glue sets the try_rc_10_first flag in an attempt to avoid wedging poorly implemented legacy USB devices. If the device capacity is too large to be expressed in the provided response buffer field of READ CAPACITY(10), a well-behaved device will set the reported capacity to 0xFFFFFFFF. We will then attempt to issue a READ CAPACITY(16) to obtain the real capacity. Since this part of the discovery logic is not covered by the first_scan flag, a warning will be printed a couple of times times per revalidate attempt if we upgrade from READ CAPACITY(10) to READ CAPACITY(16). Remember that we have successfully issued READ CAPACITY(16) so we can take the fast path on subsequent revalidate attempts. Reported-by: Menion Reviewed-by: Laurence Oberman Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3b45f7fc5620..13ec1b5ef75c 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2513,6 +2513,8 @@ sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) sector_size = old_sector_size; goto got_data; } + /* Remember that READ CAPACITY(16) succeeded */ + sdp->try_rc_10_first = 0; } } -- cgit v1.2.3 From 89d0c804392bb962553f23dc4c119d11b6bd1675 Mon Sep 17 00:00:00 2001 From: Jianchao Wang Date: Wed, 7 Mar 2018 20:29:03 +0800 Subject: scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled iscsi tcp will first send out data, then calculate and send data digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be written in spite of the on going writeback. Consequently, wrong digest will be got and sent to target. To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled in iscsi_tcp .slave_configure callback. Signed-off-by: Jianchao Wang Acked-by: Chris Leech Acked-by: Lee Duncan Signed-off-by: Martin K. Petersen --- drivers/scsi/iscsi_tcp.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 6198559abbd8..dd66c11399a2 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -954,6 +955,13 @@ static int iscsi_sw_tcp_slave_alloc(struct scsi_device *sdev) static int iscsi_sw_tcp_slave_configure(struct scsi_device *sdev) { + struct iscsi_sw_tcp_host *tcp_sw_host = iscsi_host_priv(sdev->host); + struct iscsi_session *session = tcp_sw_host->session; + struct iscsi_conn *conn = session->leadconn; + + if (conn->datadgst_en) + sdev->request_queue->backing_dev_info->capabilities + |= BDI_CAP_STABLE_WRITES; blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_ANY); blk_queue_dma_alignment(sdev->request_queue, 0); return 0; -- cgit v1.2.3 From e3d03598e8ae7d195af5d3d049596dec336f569f Mon Sep 17 00:00:00 2001 From: "H.J. Lu" Date: Mon, 19 Mar 2018 13:57:46 -0700 Subject: x86/build/64: Force the linker to use 2MB page size Binutils 2.31 will enable -z separate-code by default for x86 to avoid mixing code pages with data to improve cache performance as well as security. To reduce x86-64 executable and shared object sizes, the maximum page size is reduced from 2MB to 4KB. But x86-64 kernel must be aligned to 2MB. Pass -z max-page-size=0x200000 to linker to force 2MB page size regardless of the default page size used by linker. Tested with Linux kernel 4.15.6 on x86-64. Signed-off-by: H.J. Lu Cc: Andy Shevchenko Cc: Eric Biederman Cc: H. Peter Anvin Cc: Juergen Gross Cc: Kees Cook Cc: Kirill A. Shutemov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/CAMe9rOp4_%3D_8twdpTyAP2DhONOCeaTOsniJLoppzhoNptL8xzA@mail.gmail.com Signed-off-by: Ingo Molnar --- arch/x86/Makefile | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 498c1b812300..1c4d012550ec 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -223,6 +223,15 @@ KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) LDFLAGS := -m elf_$(UTS_MACHINE) +# +# The 64-bit kernel must be aligned to 2MB. Pass -z max-page-size=0x200000 to +# the linker to force 2MB page size regardless of the default page size used +# by the linker. +# +ifdef CONFIG_X86_64 +LDFLAGS += $(call ld-option, -z max-page-size=0x200000) +endif + # Speed up the build KBUILD_CFLAGS += -pipe # Workaround for a gcc prelease that unfortunately was shipped in a suse release -- cgit v1.2.3 From c55b8550fa57ba4f5e507be406ff9fc2845713e8 Mon Sep 17 00:00:00 2001 From: "H.J. Lu" Date: Mon, 19 Mar 2018 14:08:11 -0700 Subject: x86/boot/64: Verify alignment of the LOAD segment Since the x86-64 kernel must be aligned to 2MB, refuse to boot the kernel if the alignment of the LOAD segment isn't a multiple of 2MB. Signed-off-by: H.J. Lu Cc: Andy Shevchenko Cc: Eric Biederman Cc: H. Peter Anvin Cc: Juergen Gross Cc: Kees Cook Cc: Kirill A. Shutemov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/CAMe9rOrR7xSJgUfiCoZLuqWUwymRxXPoGBW38%2BpN%3D9g%2ByKNhZw@mail.gmail.com Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/misc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 98761a1576ce..252fee320816 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -309,6 +309,10 @@ static void parse_elf(void *output) switch (phdr->p_type) { case PT_LOAD: +#ifdef CONFIG_X86_64 + if ((phdr->p_align % 0x200000) != 0) + error("Alignment of LOAD segment isn't multiple of 2MB"); +#endif #ifdef CONFIG_RELOCATABLE dest = output; dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR); -- cgit v1.2.3 From 45dbac0e288350f9a4226a5b4b651ed434dd9f85 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 15 Mar 2018 04:58:12 -0700 Subject: locking/mutex: Improve documentation On Wed, Mar 14, 2018 at 01:56:31PM -0700, Andrew Morton wrote: > My memory is weak and our documentation is awful. What does > mutex_lock_killable() actually do and how does it differ from > mutex_lock_interruptible()? Add kernel-doc for mutex_lock_killable() and mutex_lock_io(). Reword the kernel-doc for mutex_lock_interruptible(). Signed-off-by: Matthew Wilcox Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Jonathan Corbet Cc: Kirill Tkhai Cc: Linus Torvalds Cc: Mauro Carvalho Chehab Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: cl@linux.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/20180315115812.GA9949@bombadil.infradead.org Signed-off-by: Ingo Molnar --- kernel/locking/mutex.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c index 858a07590e39..2048359f33d2 100644 --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -1082,15 +1082,16 @@ static noinline int __sched __mutex_lock_interruptible_slowpath(struct mutex *lock); /** - * mutex_lock_interruptible - acquire the mutex, interruptible - * @lock: the mutex to be acquired + * mutex_lock_interruptible() - Acquire the mutex, interruptible by signals. + * @lock: The mutex to be acquired. * - * Lock the mutex like mutex_lock(), and return 0 if the mutex has - * been acquired or sleep until the mutex becomes available. If a - * signal arrives while waiting for the lock then this function - * returns -EINTR. + * Lock the mutex like mutex_lock(). If a signal is delivered while the + * process is sleeping, this function will return without acquiring the + * mutex. * - * This function is similar to (but not equivalent to) down_interruptible(). + * Context: Process context. + * Return: 0 if the lock was successfully acquired or %-EINTR if a + * signal arrived. */ int __sched mutex_lock_interruptible(struct mutex *lock) { @@ -1104,6 +1105,18 @@ int __sched mutex_lock_interruptible(struct mutex *lock) EXPORT_SYMBOL(mutex_lock_interruptible); +/** + * mutex_lock_killable() - Acquire the mutex, interruptible by fatal signals. + * @lock: The mutex to be acquired. + * + * Lock the mutex like mutex_lock(). If a signal which will be fatal to + * the current process is delivered while the process is sleeping, this + * function will return without acquiring the mutex. + * + * Context: Process context. + * Return: 0 if the lock was successfully acquired or %-EINTR if a + * fatal signal arrived. + */ int __sched mutex_lock_killable(struct mutex *lock) { might_sleep(); @@ -1115,6 +1128,16 @@ int __sched mutex_lock_killable(struct mutex *lock) } EXPORT_SYMBOL(mutex_lock_killable); +/** + * mutex_lock_io() - Acquire the mutex and mark the process as waiting for I/O + * @lock: The mutex to be acquired. + * + * Lock the mutex like mutex_lock(). While the task is waiting for this + * mutex, it will be accounted as being in the IO wait state by the + * scheduler. + * + * Context: Process context. + */ void __sched mutex_lock_io(struct mutex *lock) { int token; -- cgit v1.2.3 From 2c2a9bbe7fecb2ad4981b6f4a56cacbfb849f848 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Mon, 12 Feb 2018 14:20:35 -0800 Subject: perf/x86/intel: Disable userspace RDPMC usage for large PEBS Userspace RDPMC cannot possibly work for large PEBS, which was introduced in: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") When the PEBS interrupt threshold is larger than one, there is no way to get exact auto-reload times and value for userspace RDPMC. Disable the userspace RDPMC usage when large PEBS is enabled. The only exception is when the PEBS interrupt threshold is 1, in which case user-space RDPMC works well even with auto-reload events. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Fixes: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") Link: http://lkml.kernel.org/r/1518474035-21006-6-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar (cherry picked from commit 1af22eba248efe2de25658041a80a3d40fb3e92e) --- arch/x86/events/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 140d33288e78..3d24edfef3e4 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2118,7 +2118,8 @@ static int x86_pmu_event_init(struct perf_event *event) event->destroy(event); } - if (READ_ONCE(x86_pmu.attr_rdpmc)) + if (READ_ONCE(x86_pmu.attr_rdpmc) && + !(event->hw.flags & PERF_X86_EVENT_FREERUNNING)) event->hw.flags |= PERF_X86_EVENT_RDPMC_ALLOWED; return err; -- cgit v1.2.3 From e5ea9b54a055619160bbfe527ebb7d7191823d66 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 17 Mar 2018 14:52:16 +0300 Subject: perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period() We intended to clear the lowest 6 bits but because of a type bug we clear the high 32 bits as well. Andi says that periods are rarely more than U32_MAX so this bug probably doesn't have a huge runtime impact. Signed-off-by: Dan Carpenter Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Kan Liang Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Fixes: 294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds") Link: http://lkml.kernel.org/r/20180317115216.GB4035@mwanda Signed-off-by: Ingo Molnar --- arch/x86/events/intel/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 56457cb73448..9b18a227fff7 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3194,7 +3194,7 @@ static unsigned bdw_limit_period(struct perf_event *event, unsigned left) X86_CONFIG(.event=0xc0, .umask=0x01)) { if (left < 128) left = 128; - left &= ~0x3fu; + left &= ~0x3fULL; } return left; } -- cgit v1.2.3 From e340895c9ed0b44548f08bbaaee4afc7bfacd354 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Mon, 12 Mar 2018 08:41:34 -0700 Subject: perf/x86/intel/uncore: Add missing filter constraint for SKX CHA event Adding a filter constraint for Intel Skylake CHA event UNC_CHA_UPI_CREDITS_ACQUIRED (0x38). The event supports core-id/thread-id and link filtering. Signed-off-by: Stephane Eranian Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Vince Weaver Link: http://lkml.kernel.org/r/1520869294-14176-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/uncore_snbep.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c index 22ec65bc033a..0876798f2ac9 100644 --- a/arch/x86/events/intel/uncore_snbep.c +++ b/arch/x86/events/intel/uncore_snbep.c @@ -3343,6 +3343,7 @@ static struct extra_reg skx_uncore_cha_extra_regs[] = { SNBEP_CBO_EVENT_EXTRA_REG(0x9134, 0xffff, 0x4), SNBEP_CBO_EVENT_EXTRA_REG(0x35, 0xff, 0x8), SNBEP_CBO_EVENT_EXTRA_REG(0x36, 0xff, 0x8), + SNBEP_CBO_EVENT_EXTRA_REG(0x38, 0xff, 0x3), EVENT_EXTRA_END }; -- cgit v1.2.3 From 578ae447e7e5d78c90ac40a06406c1741f79ba96 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 19 Mar 2018 13:18:57 -0500 Subject: jump_label: Disable jump labels in __exit code With the following commit: 333522447063 ("jump_label: Explicitly disable jump labels in __init code") ... we explicitly disabled jump labels in __init code, so they could be detected and not warned about in the following commit: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") In-kernel __exit code has the same issue. It's never used, so it's freed along with the rest of initmem. But jump label entries in __exit code aren't explicitly disabled, so we get the following warning when enabling pr_debug() in __exit code: can't patch jump_label at dmi_sysfs_exit+0x0/0x2d WARNING: CPU: 0 PID: 22572 at kernel/jump_label.c:376 __jump_label_update+0x9d/0xb0 Fix the warning by disabling all jump labels in initmem (which includes both __init and __exit code). Reported-and-tested-by: Li Wang Signed-off-by: Josh Poimboeuf Cc: Borislav Petkov Cc: Jason Baron Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") Link: http://lkml.kernel.org/r/7121e6e595374f06616c505b6e690e275c0054d1.1521483452.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- include/linux/jump_label.h | 4 ++-- init/main.c | 2 +- kernel/jump_label.c | 7 ++++--- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h index 2168cc6b8b30..b46b541c67c4 100644 --- a/include/linux/jump_label.h +++ b/include/linux/jump_label.h @@ -151,7 +151,7 @@ extern struct jump_entry __start___jump_table[]; extern struct jump_entry __stop___jump_table[]; extern void jump_label_init(void); -extern void jump_label_invalidate_init(void); +extern void jump_label_invalidate_initmem(void); extern void jump_label_lock(void); extern void jump_label_unlock(void); extern void arch_jump_label_transform(struct jump_entry *entry, @@ -199,7 +199,7 @@ static __always_inline void jump_label_init(void) static_key_initialized = true; } -static inline void jump_label_invalidate_init(void) {} +static inline void jump_label_invalidate_initmem(void) {} static __always_inline bool static_key_false(struct static_key *key) { diff --git a/init/main.c b/init/main.c index 969eaf140ef0..21efbf6ace93 100644 --- a/init/main.c +++ b/init/main.c @@ -1001,7 +1001,7 @@ static int __ref kernel_init(void *unused) /* need to finish all async __init code before freeing the memory */ async_synchronize_full(); ftrace_free_init_mem(); - jump_label_invalidate_init(); + jump_label_invalidate_initmem(); free_initmem(); mark_readonly(); system_state = SYSTEM_RUNNING; diff --git a/kernel/jump_label.c b/kernel/jump_label.c index e7214093dcd1..01ebdf1f9f40 100644 --- a/kernel/jump_label.c +++ b/kernel/jump_label.c @@ -16,6 +16,7 @@ #include #include #include +#include #ifdef HAVE_JUMP_LABEL @@ -421,15 +422,15 @@ void __init jump_label_init(void) cpus_read_unlock(); } -/* Disable any jump label entries in __init code */ -void __init jump_label_invalidate_init(void) +/* Disable any jump label entries in __init/__exit code */ +void __init jump_label_invalidate_initmem(void) { struct jump_entry *iter_start = __start___jump_table; struct jump_entry *iter_stop = __stop___jump_table; struct jump_entry *iter; for (iter = iter_start; iter < iter_stop; iter++) { - if (init_kernel_text(iter->code)) + if (init_section_contains((void *)(unsigned long)iter->code, 1)) iter->code = 0; } } -- cgit v1.2.3 From 174afc3e7dd7823df8218e16e7768b834097184e Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Mon, 12 Mar 2018 10:45:37 -0400 Subject: perf/x86/intel: Rename confusing 'freerunning PEBS' API and implementation to 'large PEBS' The 'freerunning PEBS' and 'large PEBS' are the same thing. Both of these names appear in the code and in the API, which causes confusion. Rename 'freerunning PEBS' to 'large PEBS' to unify the code, which eliminates the confusion. No functional change. Reported-by: Vince Weaver Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1520865937-22910-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/core.c | 2 +- arch/x86/events/intel/core.c | 12 ++++++------ arch/x86/events/intel/ds.c | 6 +++--- arch/x86/events/perf_event.h | 6 +++--- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 3d24edfef3e4..88797c80b3e0 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2119,7 +2119,7 @@ static int x86_pmu_event_init(struct perf_event *event) } if (READ_ONCE(x86_pmu.attr_rdpmc) && - !(event->hw.flags & PERF_X86_EVENT_FREERUNNING)) + !(event->hw.flags & PERF_X86_EVENT_LARGE_PEBS)) event->hw.flags |= PERF_X86_EVENT_RDPMC_ALLOWED; return err; diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 9b18a227fff7..1e41d7508d99 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -2952,9 +2952,9 @@ static void intel_pebs_aliases_skl(struct perf_event *event) return intel_pebs_aliases_precdist(event); } -static unsigned long intel_pmu_free_running_flags(struct perf_event *event) +static unsigned long intel_pmu_large_pebs_flags(struct perf_event *event) { - unsigned long flags = x86_pmu.free_running_flags; + unsigned long flags = x86_pmu.large_pebs_flags; if (event->attr.use_clockid) flags &= ~PERF_SAMPLE_TIME; @@ -2976,8 +2976,8 @@ static int intel_pmu_hw_config(struct perf_event *event) if (!event->attr.freq) { event->hw.flags |= PERF_X86_EVENT_AUTO_RELOAD; if (!(event->attr.sample_type & - ~intel_pmu_free_running_flags(event))) - event->hw.flags |= PERF_X86_EVENT_FREERUNNING; + ~intel_pmu_large_pebs_flags(event))) + event->hw.flags |= PERF_X86_EVENT_LARGE_PEBS; } if (x86_pmu.pebs_aliases) x86_pmu.pebs_aliases(event); @@ -3460,7 +3460,7 @@ static __initconst const struct x86_pmu core_pmu = { .event_map = intel_pmu_event_map, .max_events = ARRAY_SIZE(intel_perfmon_event_map), .apic = 1, - .free_running_flags = PEBS_FREERUNNING_FLAGS, + .large_pebs_flags = LARGE_PEBS_FLAGS, /* * Intel PMCs cannot be accessed sanely above 32-bit width, @@ -3502,7 +3502,7 @@ static __initconst const struct x86_pmu intel_pmu = { .event_map = intel_pmu_event_map, .max_events = ARRAY_SIZE(intel_perfmon_event_map), .apic = 1, - .free_running_flags = PEBS_FREERUNNING_FLAGS, + .large_pebs_flags = LARGE_PEBS_FLAGS, /* * Intel PMCs cannot be accessed sanely above 32 bit width, * so we install an artificial 1<<31 period regardless of diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 18c25ab28557..d8015235ba76 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -935,7 +935,7 @@ void intel_pmu_pebs_add(struct perf_event *event) bool needed_cb = pebs_needs_sched_cb(cpuc); cpuc->n_pebs++; - if (hwc->flags & PERF_X86_EVENT_FREERUNNING) + if (hwc->flags & PERF_X86_EVENT_LARGE_PEBS) cpuc->n_large_pebs++; pebs_update_state(needed_cb, cpuc, event->ctx->pmu); @@ -975,7 +975,7 @@ void intel_pmu_pebs_del(struct perf_event *event) bool needed_cb = pebs_needs_sched_cb(cpuc); cpuc->n_pebs--; - if (hwc->flags & PERF_X86_EVENT_FREERUNNING) + if (hwc->flags & PERF_X86_EVENT_LARGE_PEBS) cpuc->n_large_pebs--; pebs_update_state(needed_cb, cpuc, event->ctx->pmu); @@ -1530,7 +1530,7 @@ void __init intel_ds_init(void) x86_pmu.pebs_record_size = sizeof(struct pebs_record_skl); x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm; - x86_pmu.free_running_flags |= PERF_SAMPLE_TIME; + x86_pmu.large_pebs_flags |= PERF_SAMPLE_TIME; break; default: diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h index 78f91ec1056e..39cd0615f04f 100644 --- a/arch/x86/events/perf_event.h +++ b/arch/x86/events/perf_event.h @@ -69,7 +69,7 @@ struct event_constraint { #define PERF_X86_EVENT_RDPMC_ALLOWED 0x0100 /* grant rdpmc permission */ #define PERF_X86_EVENT_EXCL_ACCT 0x0200 /* accounted EXCL event */ #define PERF_X86_EVENT_AUTO_RELOAD 0x0400 /* use PEBS auto-reload */ -#define PERF_X86_EVENT_FREERUNNING 0x0800 /* use freerunning PEBS */ +#define PERF_X86_EVENT_LARGE_PEBS 0x0800 /* use large PEBS */ struct amd_nb { @@ -88,7 +88,7 @@ struct amd_nb { * REGS_USER can be handled for events limited to ring 3. * */ -#define PEBS_FREERUNNING_FLAGS \ +#define LARGE_PEBS_FLAGS \ (PERF_SAMPLE_IP | PERF_SAMPLE_TID | PERF_SAMPLE_ADDR | \ PERF_SAMPLE_ID | PERF_SAMPLE_CPU | PERF_SAMPLE_STREAM_ID | \ PERF_SAMPLE_DATA_SRC | PERF_SAMPLE_IDENTIFIER | \ @@ -608,7 +608,7 @@ struct x86_pmu { struct event_constraint *pebs_constraints; void (*pebs_aliases)(struct perf_event *event); int max_pebs_events; - unsigned long free_running_flags; + unsigned long large_pebs_flags; /* * Intel LBR -- cgit v1.2.3 From 320b0651f32b830add6497fcdcfdcb6ae8c7b8a0 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Tue, 13 Mar 2018 11:51:34 -0700 Subject: perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers The number of CHAs is miscalculated on multi-domain PCI Skylake server systems, resulting in an uncore driver initialization error. Gary Kroening explains: "For systems with a single PCI segment, it is sufficient to look for the bus number to change in order to determine that all of the CHa's have been counted for a single socket. However, for multi PCI segment systems, each socket is given a new segment and the bus number does NOT change. So looking only for the bus number to change ends up counting all of the CHa's on all sockets in the system. This leads to writing CPU MSRs beyond a valid range and causes an error in ivbep_uncore_msr_init_box()." To fix this bug, query the number of CHAs from the CAPID6 register: it should read bits 27:0 in the CAPID6 register located at Device 30, Function 3, Offset 0x9C. These 28 bits form a bit vector of available LLC slices and the CHAs that manage those slices. Reported-by: Kroening, Gary Tested-by: Kroening, Gary Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Andy Shevchenko Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: abanman@hpe.com Cc: dimitri.sivanich@hpe.com Cc: hpa@zytor.com Cc: mike.travis@hpe.com Cc: russ.anderson@hpe.com Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support") Link: http://lkml.kernel.org/r/1520967094-13219-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/uncore_snbep.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c index 0876798f2ac9..c98b943e58b4 100644 --- a/arch/x86/events/intel/uncore_snbep.c +++ b/arch/x86/events/intel/uncore_snbep.c @@ -3563,24 +3563,27 @@ static struct intel_uncore_type *skx_msr_uncores[] = { NULL, }; +/* + * To determine the number of CHAs, it should read bits 27:0 in the CAPID6 + * register which located at Device 30, Function 3, Offset 0x9C. PCI ID 0x2083. + */ +#define SKX_CAPID6 0x9c +#define SKX_CHA_BIT_MASK GENMASK(27, 0) + static int skx_count_chabox(void) { - struct pci_dev *chabox_dev = NULL; - int bus, count = 0; + struct pci_dev *dev = NULL; + u32 val = 0; - while (1) { - chabox_dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x208d, chabox_dev); - if (!chabox_dev) - break; - if (count == 0) - bus = chabox_dev->bus->number; - if (bus != chabox_dev->bus->number) - break; - count++; - } + dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2083, dev); + if (!dev) + goto out; - pci_dev_put(chabox_dev); - return count; + pci_read_config_dword(dev, SKX_CAPID6, &val); + val &= SKX_CHA_BIT_MASK; +out: + pci_dev_put(dev); + return hweight32(val); } void skx_uncore_cpu_init(void) -- cgit v1.2.3 From c917e0f259908e75bd2a65877e25f9d90c22c848 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Mon, 12 Mar 2018 09:59:43 -0700 Subject: perf/cgroup: Fix child event counting bug When a perf_event is attached to parent cgroup, it should count events for all children cgroups: parent_group <---- perf_event \ - child_group <---- process(es) However, in our tests, we found this perf_event cannot report reliable results. Here is an example case: # create cgroups mkdir -p /sys/fs/cgroup/p/c # start perf for parent group perf stat -e instructions -G "p" # on another console, run test process in child cgroup: stressapptest -s 2 -M 1000 & echo $! > /sys/fs/cgroup/p/c/cgroup.procs # after the test process is done, stop perf in the first console shows instructions p The instruction should not be "not counted" as the process runs in the child cgroup. We found this is because perf_event->cgrp and cpuctx->cgrp are not identical, thus perf_event->cgrp are not updated properly. This patch fixes this by updating perf_cgroup properly for ancestor cgroup(s). Reported-by: Ephraim Park Signed-off-by: Song Liu Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Link: http://lkml.kernel.org/r/20180312165943.1057894-1-songliubraving@fb.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 4b838470fac4..709a55b9ad97 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -724,9 +724,15 @@ static inline void __update_cgrp_time(struct perf_cgroup *cgrp) static inline void update_cgrp_time_from_cpuctx(struct perf_cpu_context *cpuctx) { - struct perf_cgroup *cgrp_out = cpuctx->cgrp; - if (cgrp_out) - __update_cgrp_time(cgrp_out); + struct perf_cgroup *cgrp = cpuctx->cgrp; + struct cgroup_subsys_state *css; + + if (cgrp) { + for (css = &cgrp->css; css; css = css->parent) { + cgrp = container_of(css, struct perf_cgroup, css); + __update_cgrp_time(cgrp); + } + } } static inline void update_cgrp_time_from_event(struct perf_event *event) @@ -754,6 +760,7 @@ perf_cgroup_set_timestamp(struct task_struct *task, { struct perf_cgroup *cgrp; struct perf_cgroup_info *info; + struct cgroup_subsys_state *css; /* * ctx->lock held by caller @@ -764,8 +771,12 @@ perf_cgroup_set_timestamp(struct task_struct *task, return; cgrp = perf_cgroup_from_task(task, ctx); - info = this_cpu_ptr(cgrp->info); - info->timestamp = ctx->timestamp; + + for (css = &cgrp->css; css; css = css->parent) { + cgrp = container_of(css, struct perf_cgroup, css); + info = this_cpu_ptr(cgrp->info); + info->timestamp = ctx->timestamp; + } } static DEFINE_PER_CPU(struct list_head, cgrp_cpuctx_list); -- cgit v1.2.3 From a8c024cd9b9683d25ae1f459525dd2c6bec75e79 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Mon, 19 Mar 2018 14:35:54 -0400 Subject: sched/debug: Fix per-task line continuation for console output When the SEQ_printf() macro prints to the console, it runs a simple printk() without KERN_CONT "continued" line printing. The result of this is oddly wrapped task info, for example: % echo t > /proc/sysrq-trigger % dmesg ... runnable tasks: ... [ 29.608611] I [ 29.608613] rcu_sched 8 3252.013846 4087 120 [ 29.608614] 0.000000 29.090111 0.000000 [ 29.608615] 0 0 [ 29.608616] / Modify SEQ_printf to use pr_cont() for expected one-line results: % echo t > /proc/sysrq-trigger % dmesg ... runnable tasks: ... [ 106.716329] S cpuhp/5 37 2006.315026 14 120 0.000000 0.496893 0.000000 0 0 / Signed-off-by: Joe Lawrence Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1521484555-8620-2-git-send-email-joe.lawrence@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c index 1ca0130ed4f9..50026aa2d81e 100644 --- a/kernel/sched/debug.c +++ b/kernel/sched/debug.c @@ -32,7 +32,7 @@ static DEFINE_SPINLOCK(sched_debug_lock); if (m) \ seq_printf(m, x); \ else \ - printk(x); \ + pr_cont(x); \ } while (0) /* -- cgit v1.2.3 From e9ca267096674eadd1fd479279bcb58df1486049 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Mon, 19 Mar 2018 14:35:55 -0400 Subject: sched/debug: Adjust newlines for better alignment Scheduler debug stats include newlines that display out of alignment when prefixed by timestamps. For example, the dmesg utility: % echo t > /proc/sysrq-trigger % dmesg ... [ 83.124251] runnable tasks: S task PID tree-key switches prio wait-time sum-exec sum-sleep ----------------------------------------------------------------------------------------------------------- At the same time, some syslog utilities (like rsyslog by default) don't like the additional newlines control characters, saving lines like this to /var/log/messages: Mar 16 16:02:29 localhost kernel: #012runnable tasks:#012 S task PID tree-key ... ^^^^ ^^^^ Clean these up by moving newline characters to their own SEQ_printf invocation. This leaves the /proc/sched_debug unchanged, but brings the entire output into alignment when prefixed: % echo t > /proc/sysrq-trigger % dmesg ... [ 62.410368] runnable tasks: [ 62.410368] S task PID tree-key switches prio wait-time sum-exec sum-sleep [ 62.410369] ----------------------------------------------------------------------------------------------------------- [ 62.410369] I kworker/u12:0 5 1932.215593 332 120 0.000000 3.621252 0.000000 0 0 / and no escaped control characters from rsyslog in /var/log/messages: Mar 16 16:15:06 localhost kernel: runnable tasks: Mar 16 16:15:06 localhost kernel: S task PID tree-key ... Signed-off-by: Joe Lawrence Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1521484555-8620-3-git-send-email-joe.lawrence@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/debug.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c index 50026aa2d81e..72c401b3b15c 100644 --- a/kernel/sched/debug.c +++ b/kernel/sched/debug.c @@ -501,12 +501,12 @@ static void print_rq(struct seq_file *m, struct rq *rq, int rq_cpu) { struct task_struct *g, *p; - SEQ_printf(m, - "\nrunnable tasks:\n" - " S task PID tree-key switches prio" - " wait-time sum-exec sum-sleep\n" - "-------------------------------------------------------" - "----------------------------------------------------\n"); + SEQ_printf(m, "\n"); + SEQ_printf(m, "runnable tasks:\n"); + SEQ_printf(m, " S task PID tree-key switches prio" + " wait-time sum-exec sum-sleep\n"); + SEQ_printf(m, "-------------------------------------------------------" + "----------------------------------------------------\n"); rcu_read_lock(); for_each_process_thread(g, p) { @@ -527,9 +527,11 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) unsigned long flags; #ifdef CONFIG_FAIR_GROUP_SCHED - SEQ_printf(m, "\ncfs_rq[%d]:%s\n", cpu, task_group_path(cfs_rq->tg)); + SEQ_printf(m, "\n"); + SEQ_printf(m, "cfs_rq[%d]:%s\n", cpu, task_group_path(cfs_rq->tg)); #else - SEQ_printf(m, "\ncfs_rq[%d]:\n", cpu); + SEQ_printf(m, "\n"); + SEQ_printf(m, "cfs_rq[%d]:\n", cpu); #endif SEQ_printf(m, " .%-30s: %Ld.%06ld\n", "exec_clock", SPLIT_NS(cfs_rq->exec_clock)); @@ -595,9 +597,11 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq) { #ifdef CONFIG_RT_GROUP_SCHED - SEQ_printf(m, "\nrt_rq[%d]:%s\n", cpu, task_group_path(rt_rq->tg)); + SEQ_printf(m, "\n"); + SEQ_printf(m, "rt_rq[%d]:%s\n", cpu, task_group_path(rt_rq->tg)); #else - SEQ_printf(m, "\nrt_rq[%d]:\n", cpu); + SEQ_printf(m, "\n"); + SEQ_printf(m, "rt_rq[%d]:\n", cpu); #endif #define P(x) \ @@ -624,7 +628,8 @@ void print_dl_rq(struct seq_file *m, int cpu, struct dl_rq *dl_rq) { struct dl_bw *dl_bw; - SEQ_printf(m, "\ndl_rq[%d]:\n", cpu); + SEQ_printf(m, "\n"); + SEQ_printf(m, "dl_rq[%d]:\n", cpu); #define PU(x) \ SEQ_printf(m, " .%-30s: %lu\n", #x, (unsigned long)(dl_rq->x)) -- cgit v1.2.3 From 5927145efd5de71976e62e2822511b13014d7e56 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Mar 2018 11:38:13 +0100 Subject: x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk There were only a few Pentium Pro multiprocessors systems where this errata applied. They are more than 20 years old now, and we've slowly dropped places which put the workarounds in and discouraged anyone from enabling the workaround. Get rid of it for good. Tested-by: Tom Lendacky Signed-off-by: Christoph Hellwig Reviewed-by: Thomas Gleixner Reviewed-by: Konrad Rzeszutek Wilk Cc: David Woodhouse Cc: Joerg Roedel Cc: Jon Mason Cc: Linus Torvalds Cc: Muli Ben-Yehuda Cc: Peter Zijlstra Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-2-hch@lst.de Signed-off-by: Ingo Molnar --- arch/x86/Kconfig.cpu | 13 ------------- arch/x86/entry/vdso/vdso32/vclock_gettime.c | 2 -- arch/x86/include/asm/barrier.h | 30 ----------------------------- arch/x86/include/asm/io.h | 15 --------------- arch/x86/kernel/pci-nommu.c | 19 ------------------ arch/x86/um/asm/barrier.h | 4 ---- 6 files changed, 83 deletions(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 65a9a4716e34..f0c5ef578153 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -315,19 +315,6 @@ config X86_L1_CACHE_SHIFT default "4" if MELAN || M486 || MGEODEGX1 default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX -config X86_PPRO_FENCE - bool "PentiumPro memory ordering errata workaround" - depends on M686 || M586MMX || M586TSC || M586 || M486 || MGEODEGX1 - ---help--- - Old PentiumPro multiprocessor systems had errata that could cause - memory operations to violate the x86 ordering standard in rare cases. - Enabling this option will attempt to work around some (but not all) - occurrences of this problem, at the cost of much heavier spinlock and - memory barrier operations. - - If unsure, say n here. Even distro kernels should think twice before - enabling this: there are few systems, and an unlikely bug. - config X86_F00F_BUG def_bool y depends on M586MMX || M586TSC || M586 || M486 diff --git a/arch/x86/entry/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c index 7780bbfb06ef..9242b28418d5 100644 --- a/arch/x86/entry/vdso/vdso32/vclock_gettime.c +++ b/arch/x86/entry/vdso/vdso32/vclock_gettime.c @@ -5,8 +5,6 @@ #undef CONFIG_OPTIMIZE_INLINING #endif -#undef CONFIG_X86_PPRO_FENCE - #ifdef CONFIG_X86_64 /* diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h index e1259f043ae9..042b5e892ed1 100644 --- a/arch/x86/include/asm/barrier.h +++ b/arch/x86/include/asm/barrier.h @@ -52,11 +52,7 @@ static inline unsigned long array_index_mask_nospec(unsigned long index, #define barrier_nospec() alternative_2("", "mfence", X86_FEATURE_MFENCE_RDTSC, \ "lfence", X86_FEATURE_LFENCE_RDTSC) -#ifdef CONFIG_X86_PPRO_FENCE -#define dma_rmb() rmb() -#else #define dma_rmb() barrier() -#endif #define dma_wmb() barrier() #ifdef CONFIG_X86_32 @@ -68,30 +64,6 @@ static inline unsigned long array_index_mask_nospec(unsigned long index, #define __smp_wmb() barrier() #define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0) -#if defined(CONFIG_X86_PPRO_FENCE) - -/* - * For this option x86 doesn't have a strong TSO memory - * model and we should fall back to full barriers. - */ - -#define __smp_store_release(p, v) \ -do { \ - compiletime_assert_atomic_type(*p); \ - __smp_mb(); \ - WRITE_ONCE(*p, v); \ -} while (0) - -#define __smp_load_acquire(p) \ -({ \ - typeof(*p) ___p1 = READ_ONCE(*p); \ - compiletime_assert_atomic_type(*p); \ - __smp_mb(); \ - ___p1; \ -}) - -#else /* regular x86 TSO memory ordering */ - #define __smp_store_release(p, v) \ do { \ compiletime_assert_atomic_type(*p); \ @@ -107,8 +79,6 @@ do { \ ___p1; \ }) -#endif - /* Atomic operations are already serializing on x86 */ #define __smp_mb__before_atomic() barrier() #define __smp_mb__after_atomic() barrier() diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 95e948627fd0..f6e5b9375d8c 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -232,21 +232,6 @@ extern void set_iounmap_nonlazy(void); */ #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) -/* - * Cache management - * - * This needed for two cases - * 1. Out of order aware processors - * 2. Accidentally out of order processors (PPro errata #51) - */ - -static inline void flush_write_buffers(void) -{ -#if defined(CONFIG_X86_PPRO_FENCE) - asm volatile("lock; addl $0,0(%%esp)": : :"memory"); -#endif -} - #endif /* __KERNEL__ */ extern void native_io_delay(void); diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c index 618285e475c6..ac7ea3a8242f 100644 --- a/arch/x86/kernel/pci-nommu.c +++ b/arch/x86/kernel/pci-nommu.c @@ -37,7 +37,6 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page, WARN_ON(size == 0); if (!check_addr("map_single", dev, bus, size)) return NOMMU_MAPPING_ERROR; - flush_write_buffers(); return bus; } @@ -72,25 +71,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, return 0; s->dma_length = s->length; } - flush_write_buffers(); return nents; } -static void nommu_sync_single_for_device(struct device *dev, - dma_addr_t addr, size_t size, - enum dma_data_direction dir) -{ - flush_write_buffers(); -} - - -static void nommu_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - flush_write_buffers(); -} - static int nommu_mapping_error(struct device *dev, dma_addr_t dma_addr) { return dma_addr == NOMMU_MAPPING_ERROR; @@ -101,8 +84,6 @@ const struct dma_map_ops nommu_dma_ops = { .free = dma_generic_free_coherent, .map_sg = nommu_map_sg, .map_page = nommu_map_page, - .sync_single_for_device = nommu_sync_single_for_device, - .sync_sg_for_device = nommu_sync_sg_for_device, .is_phys = 1, .mapping_error = nommu_mapping_error, .dma_supported = x86_dma_supported, diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h index b7d73400ea29..f31e5d903161 100644 --- a/arch/x86/um/asm/barrier.h +++ b/arch/x86/um/asm/barrier.h @@ -30,11 +30,7 @@ #endif /* CONFIG_X86_32 */ -#ifdef CONFIG_X86_PPRO_FENCE -#define dma_rmb() rmb() -#else /* CONFIG_X86_PPRO_FENCE */ #define dma_rmb() barrier() -#endif /* CONFIG_X86_PPRO_FENCE */ #define dma_wmb() barrier() #include -- cgit v1.2.3 From 31ad7f8e7dc94d3b85ccf9b6141ce6dfd35a1781 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Mon, 19 Mar 2018 10:31:54 -0400 Subject: x86/vsyscall/64: Use proper accessor to update P4D entry Writing to it directly does not work for Xen PV guests. Fixes: 49275fef986a ("x86/vsyscall/64: Explicitly set _PAGE_USER in the pagetable hierarchy") Signed-off-by: Boris Ostrovsky Signed-off-by: Thomas Gleixner Reviewed-by: Juergen Gross Acked-by: Andy Lutomirski Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180319143154.3742-1-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar --- arch/x86/entry/vsyscall/vsyscall_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c index 8560ef68a9d6..317be365bce3 100644 --- a/arch/x86/entry/vsyscall/vsyscall_64.c +++ b/arch/x86/entry/vsyscall/vsyscall_64.c @@ -347,7 +347,7 @@ void __init set_vsyscall_pgtable_user_bits(pgd_t *root) set_pgd(pgd, __pgd(pgd_val(*pgd) | _PAGE_USER)); p4d = p4d_offset(pgd, VSYSCALL_ADDR); #if CONFIG_PGTABLE_LEVELS >= 5 - p4d->p4d |= _PAGE_USER; + set_p4d(p4d, __p4d(p4d_val(*p4d) | _PAGE_USER)); #endif pud = pud_offset(p4d, VSYSCALL_ADDR); set_pud(pud, __pud(pud_val(*pud) | _PAGE_USER)); -- cgit v1.2.3 From 4f2921ca21b71a9faaecd84a9fc74401d3a8d275 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 14 Mar 2018 13:37:58 +0100 Subject: netfilter: nf_tables: meter: pick a set backend that supports updates in nftables, 'meter' can be used to instantiate a hash-table at run time: rule add filter forward iif "internal" meter hostacct { ip saddr counter} nft list meter ip filter hostacct table ip filter { meter hostacct { type ipv4_addr elements = { 192.168.0.1 : counter packets 8 bytes 2672, .. because elemets get added on the fly, the kernel must chose a set backend type that implements the ->update() function, otherwise rule insertion fails with EOPNOTSUPP. Therefore, skip set types that lack ->update, and also make sure we do not discard a (bad) candidate when we did yet find any candidate at all. This could happen when userspace prefers low memory footprint -- the set implementation currently checked might not be a fit at all. Make sure we pick it anyway (!bops). In case next candidate is a better fix, it will be chosen instead. But in case nothing else is found we at least have a non-ideal match rather than no match at all. Fixes: 6c03ae210ce3 ("netfilter: nft_set_hash: add non-resizable hashtable implementation") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 5 ++++- net/netfilter/nft_set_hash.c | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index c4acc7340eb1..36f69acaf51f 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2446,6 +2446,9 @@ EXPORT_SYMBOL_GPL(nft_unregister_set); static bool nft_set_ops_candidate(const struct nft_set_ops *ops, u32 flags) { + if ((flags & NFT_SET_EVAL) && !ops->update) + return false; + return (flags & ops->features) == (flags & NFT_SET_FEATURES); } @@ -2510,7 +2513,7 @@ nft_select_set_ops(const struct nft_ctx *ctx, if (est.space == best.space && est.lookup < best.lookup) break; - } else if (est.size < best.size) { + } else if (est.size < best.size || !bops) { break; } continue; diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index d40591fe1b2f..fc9c6d5d64cd 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -674,7 +674,7 @@ static const struct nft_set_ops * nft_hash_select_ops(const struct nft_ctx *ctx, const struct nft_set_desc *desc, u32 flags) { - if (desc->size && !(flags & NFT_SET_TIMEOUT)) { + if (desc->size && !(flags & (NFT_SET_EVAL | NFT_SET_TIMEOUT))) { switch (desc->klen) { case 4: return &nft_hash_fast_ops; -- cgit v1.2.3 From ae6153b50f9bf75a4952050f32fe168f68cdd657 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 18 Mar 2018 19:22:39 +0100 Subject: netfilter: nf_tables: permit second nat hook if colliding hook is going away Sergei Trofimovich reported that restoring an nft ruleset doesn't work anymore unless old rule content is flushed first. The problem stems from a recent change designed to prevent multiple nat hooks at the same hook point locations and nftables transaction model. A 'flush ruleset' won't take effect until the entire transaction has completed. So, if one has a nft.rules file that contains a 'flush ruleset', followed by a nat hook register request, then 'nft -f file' will work, but running 'nft -f file' again will fail with -EBUSY. Reason is that nftables will place the flush/removal requests in the transaction list, but it will not act on the removal until after all new rules are in place. The netfilter core will therefore get request to register a new nat hook before the old one is removed -- this now fails as the netfilter core can't know the existing hook is staged for removal. To fix this, we can search the transaction log when a hook collision is detected. The collision is okay if 1. there is a delete request pending for the nat hook that is already registered. 2. there is no second add request for a matching nat hook. This is required to only apply the exception once. Fixes: f92b40a8b2645 ("netfilter: core: only allow one nat hook per hook point") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 64 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 36f69acaf51f..cc8ca00e6e6e 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -74,15 +74,77 @@ static void nft_trans_destroy(struct nft_trans *trans) kfree(trans); } +/* removal requests are queued in the commit_list, but not acted upon + * until after all new rules are in place. + * + * Therefore, nf_register_net_hook(net, &nat_hook) runs before pending + * nf_unregister_net_hook(). + * + * nf_register_net_hook thus fails if a nat hook is already in place + * even if the conflicting hook is about to be removed. + * + * If collision is detected, search commit_log for DELCHAIN matching + * the new nat hooknum; if we find one collision is temporary: + * + * Either transaction is aborted (new/colliding hook is removed), or + * transaction is committed (old hook is removed). + */ +static bool nf_tables_allow_nat_conflict(const struct net *net, + const struct nf_hook_ops *ops) +{ + const struct nft_trans *trans; + bool ret = false; + + if (!ops->nat_hook) + return false; + + list_for_each_entry(trans, &net->nft.commit_list, list) { + const struct nf_hook_ops *pending_ops; + const struct nft_chain *pending; + + if (trans->msg_type != NFT_MSG_NEWCHAIN && + trans->msg_type != NFT_MSG_DELCHAIN) + continue; + + pending = trans->ctx.chain; + if (!nft_is_base_chain(pending)) + continue; + + pending_ops = &nft_base_chain(pending)->ops; + if (pending_ops->nat_hook && + pending_ops->pf == ops->pf && + pending_ops->hooknum == ops->hooknum) { + /* other hook registration already pending? */ + if (trans->msg_type == NFT_MSG_NEWCHAIN) + return false; + + ret = true; + } + } + + return ret; +} + static int nf_tables_register_hook(struct net *net, const struct nft_table *table, struct nft_chain *chain) { + struct nf_hook_ops *ops; + int ret; + if (table->flags & NFT_TABLE_F_DORMANT || !nft_is_base_chain(chain)) return 0; - return nf_register_net_hook(net, &nft_base_chain(chain)->ops); + ops = &nft_base_chain(chain)->ops; + ret = nf_register_net_hook(net, ops); + if (ret == -EBUSY && nf_tables_allow_nat_conflict(net, ops)) { + ops->nat_hook = false; + ret = nf_register_net_hook(net, ops); + ops->nat_hook = true; + } + + return ret; } static void nf_tables_unregister_hook(struct net *net, -- cgit v1.2.3 From 467697d289e7e6e1b15910d99096c0da08c56d5b Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 20 Mar 2018 15:25:37 +0100 Subject: netfilter: nf_tables: add missing netlink attrs to policies Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Fixes: f25ad2e907f1 ("netfilter: nf_tables: prepare for expressions associated to set elements") Fixes: 1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index cc8ca00e6e6e..14777c404071 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1973,6 +1973,7 @@ static const struct nla_policy nft_rule_policy[NFTA_RULE_MAX + 1] = { [NFTA_RULE_POSITION] = { .type = NLA_U64 }, [NFTA_RULE_USERDATA] = { .type = NLA_BINARY, .len = NFT_USERDATA_MAXLEN }, + [NFTA_RULE_ID] = { .type = NLA_U32 }, }; static int nf_tables_fill_rule_info(struct sk_buff *skb, struct net *net, @@ -3380,6 +3381,8 @@ static const struct nla_policy nft_set_elem_policy[NFTA_SET_ELEM_MAX + 1] = { [NFTA_SET_ELEM_TIMEOUT] = { .type = NLA_U64 }, [NFTA_SET_ELEM_USERDATA] = { .type = NLA_BINARY, .len = NFT_USERDATA_MAXLEN }, + [NFTA_SET_ELEM_EXPR] = { .type = NLA_NESTED }, + [NFTA_SET_ELEM_OBJREF] = { .type = NLA_STRING }, }; static const struct nla_policy nft_set_elem_list_policy[NFTA_SET_ELEM_LIST_MAX + 1] = { -- cgit v1.2.3 From fa8e6d58c5bc260f4369c6699683d69695daed0a Mon Sep 17 00:00:00 2001 From: Jagdish Gediya Date: Wed, 21 Mar 2018 04:31:36 +0530 Subject: mtd: nand: fsl_ifc: Fix nand waitfunc return value As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya Reviewed-by: Prabhakar Kushwaha Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsl_ifc_nand.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 4872a7ba6503..b6a3ba445cfb 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -626,6 +626,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; u32 nand_fsr; + int status; /* Use READ_STATUS command, but wait for the device to be ready */ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | @@ -640,12 +641,12 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) fsl_ifc_run_command(mtd); nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr); - + status = nand_fsr >> 24; /* * The chip always seems to report that it is * write-protected, even when it is not. */ - return nand_fsr | NAND_STATUS_WP; + return status | NAND_STATUS_WP; } /* -- cgit v1.2.3 From 825d487583089f9a33d31650c9c41f6474aab7fc Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 15 Mar 2018 16:56:20 -0400 Subject: kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races Some filesystems have timestamps with coarse precision that may allow for a recently built object file to have the same timestamp as the updated time on one of its dependency files. When that happens, the object file doesn't get rebuilt as it should. This is especially the case on filesystems that don't have sub-second time precision, such as ext3 or Ext4 with 128B inodes. Let's prevent that by making sure updated dependency files have a newer timestamp than the first file we created (i.e. autoksyms.h.tmpnew). Reported-by: Thomas Lindroth Signed-off-by: Nicolas Pitre Tested-by: Thomas Lindroth Signed-off-by: Masahiro Yamada --- scripts/adjust_autoksyms.sh | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/scripts/adjust_autoksyms.sh b/scripts/adjust_autoksyms.sh index 513da1a4a2da..d67830e6e360 100755 --- a/scripts/adjust_autoksyms.sh +++ b/scripts/adjust_autoksyms.sh @@ -84,6 +84,13 @@ while read sympath; do depfile="include/config/ksym/${sympath}.h" mkdir -p "$(dirname "$depfile")" touch "$depfile" + # Filesystems with coarse time precision may create timestamps + # equal to the one from a file that was very recently built and that + # needs to be rebuild. Let's guard against that by making sure our + # dep files are always newer than the first file we created here. + while [ ! "$depfile" -nt "$new_ksyms_file" ]; do + touch "$depfile" + done echo $((count += 1)) done | tail -1 ) changed=${changed:-0} -- cgit v1.2.3 From 843c3a59997f18060848b8632607dd04781b52d1 Mon Sep 17 00:00:00 2001 From: Jagdish Gediya Date: Wed, 21 Mar 2018 05:51:46 +0530 Subject: mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0 Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC version 2.0.0 due to increase in SRAM size. This is causing eccstat array to over flow. So, replace eccstat array with u32 variable to make it fail-safe and independent of number of ECC status registers or SRAM size. Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jagdish Gediya Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsl_ifc_nand.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index b6a3ba445cfb..fae01b04abc7 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -173,14 +173,9 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) /* returns nonzero if entire page is blank */ static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl, - u32 *eccstat, unsigned int bufnum) + u32 eccstat, unsigned int bufnum) { - u32 reg = eccstat[bufnum / 4]; - int errors; - - errors = (reg >> ((3 - bufnum % 4) * 8)) & 15; - - return errors; + return (eccstat >> ((3 - bufnum % 4) * 8)) & 15; } /* @@ -193,7 +188,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl; struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; - u32 eccstat[4]; + u32 eccstat; int i; /* set the chip select for NAND Transaction */ @@ -228,8 +223,8 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) if (nctrl->eccread) { int errors; int bufnum = nctrl->page & priv->bufnum_mask; - int sector = bufnum * chip->ecc.steps; - int sector_end = sector + chip->ecc.steps - 1; + int sector_start = bufnum * chip->ecc.steps; + int sector_end = sector_start + chip->ecc.steps - 1; __be32 *eccstat_regs; if (ctrl->version >= FSL_IFC_VERSION_2_0_0) @@ -237,10 +232,12 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) else eccstat_regs = ifc->ifc_nand.v1_nand_eccstat; - for (i = sector / 4; i <= sector_end / 4; i++) - eccstat[i] = ifc_in32(&eccstat_regs[i]); + eccstat = ifc_in32(&eccstat_regs[sector_start / 4]); + + for (i = sector_start; i <= sector_end; i++) { + if (i != sector_start && !(i % 4)) + eccstat = ifc_in32(&eccstat_regs[i / 4]); - for (i = sector; i <= sector_end; i++) { errors = check_read_ecc(mtd, ctrl, eccstat, i); if (errors == 15) { -- cgit v1.2.3 From 0f0e8de334c54c38818a4a5390a39aa09deff5bf Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 19 Mar 2018 22:12:53 +0100 Subject: kbuild: set no-integrated-as before incl. arch Makefile In order to make sure compiler flag detection for ARM works correctly the no-integrated-as flags need to be set before including the arch specific Makefile. Fixes: cfe17c9bbe6a ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile") Signed-off-by: Stefan Agner Signed-off-by: Masahiro Yamada --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index e02d092bc2d6..9e7f69c26aba 100644 --- a/Makefile +++ b/Makefile @@ -487,6 +487,8 @@ CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN) endif KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) +KBUILD_CFLAGS += $(call cc-option, -no-integrated-as) +KBUILD_AFLAGS += $(call cc-option, -no-integrated-as) endif RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register @@ -743,8 +745,6 @@ KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) # See modpost pattern 2 KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,) KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior) -KBUILD_CFLAGS += $(call cc-option, -no-integrated-as) -KBUILD_AFLAGS += $(call cc-option, -no-integrated-as) else # These warnings generated too much noise in a regular build. -- cgit v1.2.3 From 6b00c35138b404be98b85f4a703be594cbed501c Mon Sep 17 00:00:00 2001 From: Jagdish Gediya Date: Thu, 22 Mar 2018 01:08:10 +0530 Subject: mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0 Due to missing information in Hardware manual, current implementation doesn't read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0. Add support to read ECCSTAT0 and ECCSTAT1 registers during ecccheck for IFC 2.0. Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya Reviewed-by: Prabhakar Kushwaha Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsl_ifc_nand.c | 6 +----- include/linux/fsl_ifc.h | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index fae01b04abc7..5a9c2f0020c2 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -227,11 +227,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) int sector_end = sector_start + chip->ecc.steps - 1; __be32 *eccstat_regs; - if (ctrl->version >= FSL_IFC_VERSION_2_0_0) - eccstat_regs = ifc->ifc_nand.v2_nand_eccstat; - else - eccstat_regs = ifc->ifc_nand.v1_nand_eccstat; - + eccstat_regs = ifc->ifc_nand.nand_eccstat; eccstat = ifc_in32(&eccstat_regs[sector_start / 4]); for (i = sector_start; i <= sector_end; i++) { diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h index c332f0a45607..3fdfede2f0f3 100644 --- a/include/linux/fsl_ifc.h +++ b/include/linux/fsl_ifc.h @@ -734,11 +734,7 @@ struct fsl_ifc_nand { u32 res19[0x10]; __be32 nand_fsr; u32 res20; - /* The V1 nand_eccstat is actually 4 words that overlaps the - * V2 nand_eccstat. - */ - __be32 v1_nand_eccstat[2]; - __be32 v2_nand_eccstat[6]; + __be32 nand_eccstat[8]; u32 res21[0x1c]; __be32 nanndcr; u32 res22[0x2]; -- cgit v1.2.3 From a8d7bde23e7130686b76624b099f3e22dd38aef7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 21 Mar 2018 10:06:13 +0100 Subject: ALSA: hda - Force polling mode on CFL for fixing codec communication We've observed too long probe time with Coffee Lake (CFL) machines, and the likely cause is some communication problem between the HD-audio controller and the codec chips. While the controller expects an IRQ wakeup for each codec response, it seems sometimes missing, and it takes one second for the controller driver to time out and read the response in the polling mode. Although we aren't sure about the real culprit yet, in this patch, we put a workaround by forcing the polling mode as default for CFL machines; the polling mode itself isn't too heavy, and much better than other workarounds initially suggested (e.g. disabling power-save), at least. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199007 Fixes: e79b0006c45c ("ALSA: hda - Add Coffelake PCI ID") Reported-and-tested-by: Hui Wang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index d5017adf9feb..c507c69029e3 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -375,6 +375,7 @@ enum { ((pci)->device == 0x160c)) #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) +#define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348) static char *driver_short_names[] = { [AZX_DRIVER_ICH] = "HDA Intel", @@ -1744,6 +1745,10 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci, else chip->bdl_pos_adj = bdl_pos_adj[dev]; + /* Workaround for a communication error on CFL (bko#199007) */ + if (IS_CFL(pci)) + chip->polling_mode = 1; + err = azx_bus_init(chip, model[dev], &pci_hda_io_ops); if (err < 0) { kfree(hda); -- cgit v1.2.3 From eb85a355c3afd9379f5953cfe2df73632d14c884 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 21 Mar 2018 08:16:29 -0700 Subject: ARM: OMAP: Fix SRAM W+X mapping We are still using custom SRAM code for some SoCs and are not marking the PM code mapped to SRAM as read-only and executable after we're done. With CONFIG_DEBUG_WX=y, we will get "Found insecure W+X mapping at address" warning. Let's fix this issue the same way as commit 728bbe75c82f ("misc: sram: Introduce support code for protect-exec sram type") is doing for drivers/misc/sram-exec.c. On omap3, we need to restore SRAM when returning from off mode after idle, so init time configuration is not enough. And as we no longer have users for omap_sram_push_address() we can make it static while at it. Note that eventually we should be using sram-exec.c for all SoCs. Cc: stable@vger.kernel.org # v4.12+ Cc: Dave Gerlach Reported-by: Pavel Machek Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/sram.h | 11 +---------- arch/arm/plat-omap/sram.c | 36 +++++++++++++++++++++++++++++++++- 2 files changed, 36 insertions(+), 11 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index fb061cf0d736..30a07730807a 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -5,13 +5,4 @@ void omap_map_sram(unsigned long start, unsigned long size, unsigned long skip, int cached); void omap_sram_reset(void); -extern void *omap_sram_push_address(unsigned long size); - -/* Macro to push a function to the internal SRAM, using the fncpy API */ -#define omap_sram_push(funcp, size) ({ \ - typeof(&(funcp)) _res = NULL; \ - void *_sram_address = omap_sram_push_address(size); \ - if (_sram_address) \ - _res = fncpy(_sram_address, &(funcp), size); \ - _res; \ -}) +extern void *omap_sram_push(void *funcp, unsigned long size); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index a5bc92d7e476..921840acf65c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -42,7 +43,7 @@ static void __iomem *omap_sram_ceil; * Note that fncpy requires the returned address to be aligned * to an 8-byte boundary. */ -void *omap_sram_push_address(unsigned long size) +static void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; @@ -60,6 +61,30 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } +void *omap_sram_push(void *funcp, unsigned long size) +{ + void *sram; + unsigned long base; + int pages; + void *dst = NULL; + + sram = omap_sram_push_address(size); + if (!sram) + return NULL; + + base = (unsigned long)sram & PAGE_MASK; + pages = PAGE_ALIGN(size) / PAGE_SIZE; + + set_memory_rw(base, pages); + + dst = fncpy(sram, funcp, size); + + set_memory_ro(base, pages); + set_memory_x(base, pages); + + return dst; +} + /* * The SRAM context is lost during off-idle and stack * needs to be reset. @@ -75,6 +100,9 @@ void omap_sram_reset(void) void __init omap_map_sram(unsigned long start, unsigned long size, unsigned long skip, int cached) { + unsigned long base; + int pages; + if (size == 0) return; @@ -95,4 +123,10 @@ void __init omap_map_sram(unsigned long start, unsigned long size, */ memset_io(omap_sram_base + omap_sram_skip, 0, omap_sram_size - omap_sram_skip); + + base = (unsigned long)omap_sram_base; + pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE; + + set_memory_ro(base, pages); + set_memory_x(base, pages); } -- cgit v1.2.3 From 32927e281c004c352c0b88d2975f5511e5b7cf8e Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Tue, 20 Mar 2018 15:45:37 +0200 Subject: IB/mlx5: Don't clean uninitialized UMR resources In case we failed to create UMR resources, mark them as invalid so we won't try to destroy them on the unwind path. Add the relevant checks to destroy_umrc_res(), this is done for the unlikely event ib_register_device() or create_umr_res() err out and we try to destroy invalid objects. Fixes: 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/main.c | 12 +++++++++--- drivers/infiniband/hw/mlx5/mr.c | 3 +++ 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index da091de4e69d..7f8bda3a2005 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -3448,9 +3448,12 @@ static void destroy_umrc_res(struct mlx5_ib_dev *dev) if (err) mlx5_ib_warn(dev, "mr cache cleanup failed\n"); - mlx5_ib_destroy_qp(dev->umrc.qp); - ib_free_cq(dev->umrc.cq); - ib_dealloc_pd(dev->umrc.pd); + if (dev->umrc.qp) + mlx5_ib_destroy_qp(dev->umrc.qp); + if (dev->umrc.cq) + ib_free_cq(dev->umrc.cq); + if (dev->umrc.pd) + ib_dealloc_pd(dev->umrc.pd); } enum { @@ -3552,12 +3555,15 @@ static int create_umr_res(struct mlx5_ib_dev *dev) error_4: mlx5_ib_destroy_qp(qp); + dev->umrc.qp = NULL; error_3: ib_free_cq(cq); + dev->umrc.cq = NULL; error_2: ib_dealloc_pd(pd); + dev->umrc.pd = NULL; error_0: kfree(attr); diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index c51c602f06d6..3e0b3f0238d6 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -739,6 +739,9 @@ int mlx5_mr_cache_cleanup(struct mlx5_ib_dev *dev) { int i; + if (!dev->cache.wq) + return 0; + dev->cache.stopped = 1; flush_workqueue(dev->cache.wq); -- cgit v1.2.3 From 103140eccbd2e3d56bcd366eba3e657f5d358bf5 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Wed, 21 Mar 2018 09:00:29 +0200 Subject: RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init The fact that resource tracking commit 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") was added immediately after commit 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") caused us to miss the fact that PD and CQ are created after ib_register_device, but released after ib_unregister_device() and not before as it is expected from normal flow. Fix introduced in commit 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") revealed this fact, so this patch is needed to avoid from restrack warnings It fixes resource tracking warnings during shutdown. [ 43.473906] CPU: 5 PID: 3016 Comm: modprobe Not tainted 4.16.0-rc5-for-linust-perf-2018-03-19_07-01-58-14 #1 [ 43.473907] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.473919] RIP: 0010:rdma_restrack_clean+0x25/0x30 [ib_core] [ 43.473921] RSP: 0018:ffffc9000267be48 EFLAGS: 00010282 [ 43.473924] RAX: 0000000000000000 RBX: ffff88033c690070 RCX: 0000000180080006 [ 43.473925] RDX: ffff88035ce922e0 RSI: ffffea000cf1a200 RDI: ffff88033c6907c8 [ 43.473926] RBP: ffff88033c690070 R08: ffff88033c689000 R09: 0000000180080006 [ 43.473927] R10: 000000003c68a001 R11: ffff88033c689000 R12: ffff88033c690000 [ 43.473929] R13: ffff88033c69005c R14: 0000000000000000 R15: 0000000000000000 [ 43.473932] FS: 00007f5928359740(0000) GS:ffff88036c540000(0000) knlGS:0000000000000000 [ 43.473933] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.473935] CR2: 00007ffffc760cc8 CR3: 000000035620c000 CR4: 00000000000006e0 [ 43.473940] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 43.473941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 43.473942] Call Trace: [ 43.473969] ib_unregister_device+0xf5/0x190 [ib_core] [ 43.474000] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] [ 43.474098] mlx5_remove_device+0xf5/0x120 [mlx5_core] [ 43.474132] mlx5_unregister_interface+0x37/0x90 [mlx5_core] [ 43.474142] mlx5_ib_cleanup+0xc/0x16a [mlx5_ib] [ 43.474152] SyS_delete_module+0x159/0x260 [ 43.474159] do_syscall_64+0x61/0x110 [ 43.474165] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 43.474168] RIP: 0033:0x7f59278466b7 [ 43.474170] RSP: 002b:00007ffffc763e38 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 43.474172] RAX: ffffffffffffffda RBX: 000000000130d590 RCX: 00007f59278466b7 [ 43.474173] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000000000130d5f8 [ 43.474175] RBP: 0000000000000000 R08: 00007f5927b0b060 R09: 00007f59278b6a40 [ 43.474176] R10: 00007ffffc763bc0 R11: 0000000000000202 R12: 0000000000000000 [ 43.474177] R13: 0000000000000001 R14: 000000000130d5f8 R15: 0000000000000000 [ 43.474179] Code: 84 00 00 00 00 00 0f 1f 44 00 00 48 83 c7 28 31 c0 eb 0c 48 83 c0 08 48 3d 00 08 00 00 74 0f 48 8d 14 07 48 8b 12 48 85 d2 74 e8 <0f> 0b c3 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 47 28 [ 43.474221] ---[ end trace e89771e2250ffc23 ]--- Fixes: 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") Reviewed-by: Mark Bloch Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/device.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index bb065c9449be..b7459cf524e4 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -290,6 +290,7 @@ void ib_dealloc_device(struct ib_device *device) { WARN_ON(device->reg_state != IB_DEV_UNREGISTERED && device->reg_state != IB_DEV_UNINITIALIZED); + rdma_restrack_clean(&device->res); put_device(&device->dev); } EXPORT_SYMBOL(ib_dealloc_device); @@ -600,8 +601,6 @@ void ib_unregister_device(struct ib_device *device) } up_read(&lists_rwsem); - rdma_restrack_clean(&device->res); - ib_device_unregister_rdmacg(device); ib_device_unregister_sysfs(device); -- cgit v1.2.3 From 5f3e3b85cc0a5eae1c46d72e47d3de7bf208d9e2 Mon Sep 17 00:00:00 2001 From: Chien Tin Tung Date: Wed, 21 Mar 2018 13:09:25 -0500 Subject: RDMA/ucma: Correct option size check using optlen The option size check is using optval instead of optlen causing the set option call to fail. Use the correct field, optlen, for size check. Fixes: 6a21dfc0d0db ("RDMA/ucma: Limit possible option size") Signed-off-by: Chien Tin Tung Signed-off-by: Shiraz Saleem Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/ucma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index e5a1e7d81326..60449d611fb4 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1307,7 +1307,7 @@ static ssize_t ucma_set_option(struct ucma_file *file, const char __user *inbuf, if (IS_ERR(ctx)) return PTR_ERR(ctx); - if (unlikely(cmd.optval > KMALLOC_MAX_SIZE)) + if (unlikely(cmd.optlen > KMALLOC_MAX_SIZE)) return -EINVAL; optval = memdup_user((void __user *) (unsigned long) cmd.optval, -- cgit v1.2.3 From c3594f22302cca5e924e47ec1cc8edd265708f41 Mon Sep 17 00:00:00 2001 From: "Kalderon, Michal" Date: Wed, 21 Mar 2018 14:51:50 +0200 Subject: RDMA/qedr: fix QP's ack timeout configuration QPs that were configured with ack timeout value lower than 1 msec will not implement re-transmission timeout. This means that if a packet / ACK were dropped, the QP will not retransmit this packet. This can lead to an application hang. Fixes: cecbcddf6 ("qedr: Add support for QP verbs") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/verbs.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 875b17272d65..716fae063122 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -2086,18 +2086,23 @@ int qedr_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, SET_FIELD(qp_params.modify_flags, QED_ROCE_MODIFY_QP_VALID_ACK_TIMEOUT, 1); - qp_params.ack_timeout = attr->timeout; - if (attr->timeout) { - u32 temp; - - temp = 4096 * (1UL << attr->timeout) / 1000 / 1000; - /* FW requires [msec] */ - qp_params.ack_timeout = temp; - } else { - /* Infinite */ + /* The received timeout value is an exponent used like this: + * "12.7.34 LOCAL ACK TIMEOUT + * Value representing the transport (ACK) timeout for use by + * the remote, expressed as: 4.096 * 2^timeout [usec]" + * The FW expects timeout in msec so we need to divide the usec + * result by 1000. We'll approximate 1000~2^10, and 4.096 ~ 2^2, + * so we get: 2^2 * 2^timeout / 2^10 = 2^(timeout - 8). + * The value of zero means infinite so we use a 'max_t' to make + * sure that sub 1 msec values will be configured as 1 msec. + */ + if (attr->timeout) + qp_params.ack_timeout = + 1 << max_t(int, attr->timeout - 8, 0); + else qp_params.ack_timeout = 0; - } } + if (attr_mask & IB_QP_RETRY_CNT) { SET_FIELD(qp_params.modify_flags, QED_ROCE_MODIFY_QP_VALID_RETRY_CNT, 1); -- cgit v1.2.3 From b15606f47b89b0b09936d7f45b59ba6275527041 Mon Sep 17 00:00:00 2001 From: "Kalderon, Michal" Date: Wed, 21 Mar 2018 14:51:51 +0200 Subject: RDMA/qedr: Fix rc initialization on CNQ allocation failure Return code wasn't set properly when CNQ allocation failed. This only affect error message logging, currently user will receive an error message that says the qedr driver load failed with rc '0', instead of ENOMEM Fixes: ec72fce4 ("qedr: Add support for RoCE HW init") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c index db4bf97c0e15..0ffb9b93e22d 100644 --- a/drivers/infiniband/hw/qedr/main.c +++ b/drivers/infiniband/hw/qedr/main.c @@ -833,7 +833,8 @@ static struct qedr_dev *qedr_add(struct qed_dev *cdev, struct pci_dev *pdev, dev->num_cnq = dev->ops->rdma_get_min_cnq_msix(cdev); if (!dev->num_cnq) { - DP_ERR(dev, "not enough CNQ resources.\n"); + DP_ERR(dev, "Failed. At least one CNQ is required.\n"); + rc = -ENOMEM; goto init_err; } -- cgit v1.2.3 From caf61b1b8b88ccf1451f7321a176393797e8d292 Mon Sep 17 00:00:00 2001 From: "Kalderon, Michal" Date: Wed, 21 Mar 2018 14:51:52 +0200 Subject: RDMA/qedr: Fix QP state initialization race Once the FW is transitioned to error, FLUSH cqes can be received. We want the driver to be aware of the fact that QP is already in error. Without this fix, a user may see false error messages in the dmesg log, mentioning that a FLUSH cqe was received while QP is not in error state. Fixes: cecbcddf ("qedr: Add support for QP verbs") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/verbs.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 716fae063122..419a158e8fca 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1841,14 +1841,15 @@ static void qedr_reset_qp_hwq_info(struct qedr_qp_hwq_info *qph) static int qedr_update_qp_state(struct qedr_dev *dev, struct qedr_qp *qp, + enum qed_roce_qp_state cur_state, enum qed_roce_qp_state new_state) { int status = 0; - if (new_state == qp->state) + if (new_state == cur_state) return 0; - switch (qp->state) { + switch (cur_state) { case QED_ROCE_QP_STATE_RESET: switch (new_state) { case QED_ROCE_QP_STATE_INIT: @@ -1955,6 +1956,7 @@ int qedr_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, struct qedr_dev *dev = get_qedr_dev(&qp->dev->ibdev); const struct ib_global_route *grh = rdma_ah_read_grh(&attr->ah_attr); enum ib_qp_state old_qp_state, new_qp_state; + enum qed_roce_qp_state cur_state; int rc = 0; DP_DEBUG(dev, QEDR_MSG_QP, @@ -2175,13 +2177,25 @@ int qedr_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, qp->dest_qp_num = attr->dest_qp_num; } + cur_state = qp->state; + + /* Update the QP state before the actual ramrod to prevent a race with + * fast path. Modifying the QP state to error will cause the device to + * flush the CQEs and while polling the flushed CQEs will considered as + * a potential issue if the QP isn't in error state. + */ + if ((attr_mask & IB_QP_STATE) && qp->qp_type != IB_QPT_GSI && + !udata && qp_params.new_state == QED_ROCE_QP_STATE_ERR) + qp->state = QED_ROCE_QP_STATE_ERR; + if (qp->qp_type != IB_QPT_GSI) rc = dev->ops->rdma_modify_qp(dev->rdma_ctx, qp->qed_qp, &qp_params); if (attr_mask & IB_QP_STATE) { if ((qp->qp_type != IB_QPT_GSI) && (!udata)) - rc = qedr_update_qp_state(dev, qp, qp_params.new_state); + rc = qedr_update_qp_state(dev, qp, cur_state, + qp_params.new_state); qp->state = qp_params.new_state; } -- cgit v1.2.3 From 214cbc14734958fe533916fdb4194f5983ad4bc4 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 16 Mar 2018 21:27:28 +0100 Subject: MIPS: lantiq: Fix Danube USB clock On Danube the USB0 controller registers are at 1e101000 and the USB0 PHY register is at 1f203018 similar to all other lantiq SoCs. Activate the USB controller gating clock thorough the USB controller driver and not the PHY. This fixes a problem introduced in a previous commit. Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module") Signed-off-by: Mathias Kresin Signed-off-by: Hauke Mehrtens Acked-by: Martin Blumenstingl Cc: Ralf Baechle Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18816/ Signed-off-by: James Hogan --- arch/mips/lantiq/xway/sysctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index 52500d3b7004..f11f1dd10493 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -560,7 +560,7 @@ void __init ltq_soc_init(void) } else { clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); - clkdev_add_pmu("1f203018.usb2-phy", "ctrl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P); clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); -- cgit v1.2.3 From 3223a5a7d3a606dcb7d9190a788b9544a45441ee Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 16 Mar 2018 21:27:29 +0100 Subject: MIPS: lantiq: Enable AHB Bus for USB On Danube and AR9 the USB core is connected though a AHB bus to the main system cross bar, hence we need to enable the gating clock of the AHB Bus as well to make the USB controller work. Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module") Signed-off-by: Mathias Kresin Signed-off-by: Hauke Mehrtens Acked-by: Martin Blumenstingl Cc: Ralf Baechle Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18814/ Signed-off-by: James Hogan --- arch/mips/lantiq/xway/sysctrl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index f11f1dd10493..e0af39b33e28 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -549,9 +549,9 @@ void __init ltq_soc_init(void) clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), ltq_ar9_fpi_hz(), CLOCK_250M); clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P); - clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM); clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P); - clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); + clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM); clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH); clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); @@ -560,7 +560,7 @@ void __init ltq_soc_init(void) } else { clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); - clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM); clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P); clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); -- cgit v1.2.3 From a821328c2f3003b908880792d71b2781b44fa53c Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 16 Mar 2018 21:27:30 +0100 Subject: MIPS: lantiq: ase: Enable MFD_SYSCON Enable syscon to use it for the RCU MFD on Amazon SE as well. The Amazon SE also has similar reset controller system as Danube and XWAY and use their drivers mostly. As these drivers now need syscon also activate the syscon subsystem for for Amazon SE. Fixes: 2b6639d4c794 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD") Signed-off-by: Mathias Kresin Signed-off-by: Hauke Mehrtens Acked-by: Martin Blumenstingl Cc: Ralf Baechle Cc: John Crispin Cc: linux-mips@linux-mips.org Cc: # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18817/ Signed-off-by: James Hogan --- arch/mips/lantiq/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 692ae85a3e3d..8e3a1fc2bc39 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -13,6 +13,8 @@ choice config SOC_AMAZON_SE bool "Amazon SE" select SOC_TYPE_XWAY + select MFD_SYSCON + select MFD_CORE config SOC_XWAY bool "XWAY" -- cgit v1.2.3 From 891731f6a5dbe508d12443175a7e166a2fba616a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 20 Mar 2018 19:29:51 +1100 Subject: MIPS: ralink: Remove ralink_halt() ralink_halt() does nothing that machine_halt() doesn't already do, so it adds no value. It actually causes incorrect behaviour due to the "unreachable()" at the end. This tells the compiler that the end of the function will never be reached, which isn't true. The compiler responds by not adding a 'return' instruction, so control simply moves on to whatever bytes come afterwards in memory. In my tested, that was the ralink_restart() function. This means that an attempt to 'halt' the machine would actually cause a reboot. So remove ralink_halt() so that a 'halt' really does halt. Fixes: c06e836ada59 ("MIPS: ralink: adds reset code") Signed-off-by: NeilBrown Cc: John Crispin Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 3.9+ Patchwork: https://patchwork.linux-mips.org/patch/18851/ Signed-off-by: James Hogan --- arch/mips/ralink/reset.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c index 64543d66e76b..e9531fea23a2 100644 --- a/arch/mips/ralink/reset.c +++ b/arch/mips/ralink/reset.c @@ -96,16 +96,9 @@ static void ralink_restart(char *command) unreachable(); } -static void ralink_halt(void) -{ - local_irq_disable(); - unreachable(); -} - static int __init mips_reboot_setup(void) { _machine_restart = ralink_restart; - _machine_halt = ralink_halt; return 0; } -- cgit v1.2.3 From a63d706ea719190a79a6c769e898f70680044d3e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 21 Mar 2018 14:02:10 +1100 Subject: MIPS: ralink: Fix booting on MT7621 Since commit 3af5a67c86a3 ("MIPS: Fix early CM probing") the MT7621 has not been able to boot. This commit caused mips_cm_probe() to be called before mt7621.c::proc_soc_init(). prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out the bootloader config" and means that configuration registers are no longer available. It has some code to re-enable this config. Before this re-enable code is run, the sysc register cannot be read, so when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and panic() is called. If we move the config-repair code to the top of prom_soc_init(), the registers can be read and boot can proceed. Very occasionally, the first register read after the reconfiguration returns garbage, so add a call to __sync(). Fixes: 3af5a67c86a3 ("MIPS: Fix early CM probing") Signed-off-by: NeilBrown Reviewed-by: Matt Redfearn Cc: John Crispin Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 4.5+ Patchwork: https://patchwork.linux-mips.org/patch/18859/ Signed-off-by: James Hogan --- arch/mips/ralink/mt7621.c | 42 ++++++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 20 deletions(-) diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c index 1b274742077d..d2718de60b9b 100644 --- a/arch/mips/ralink/mt7621.c +++ b/arch/mips/ralink/mt7621.c @@ -170,6 +170,28 @@ void prom_soc_init(struct ralink_soc_info *soc_info) u32 n1; u32 rev; + /* Early detection of CMP support */ + mips_cm_probe(); + mips_cpc_probe(); + + if (mips_cps_numiocu(0)) { + /* + * mips_cm_probe() wipes out bootloader + * config for CM regions and we have to configure them + * again. This SoC cannot talk to pamlbus devices + * witout proper iocu region set up. + * + * FIXME: it would be better to do this with values + * from DT, but we need this very early because + * without this we cannot talk to pretty much anything + * including serial. + */ + write_gcr_reg0_base(MT7621_PALMBUS_BASE); + write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | + CM_GCR_REGn_MASK_CMTGT_IOCU0); + __sync(); + } + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); @@ -194,26 +216,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info) rt2880_pinmux_data = mt7621_pinmux_data; - /* Early detection of CMP support */ - mips_cm_probe(); - mips_cpc_probe(); - - if (mips_cps_numiocu(0)) { - /* - * mips_cm_probe() wipes out bootloader - * config for CM regions and we have to configure them - * again. This SoC cannot talk to pamlbus devices - * witout proper iocu region set up. - * - * FIXME: it would be better to do this with values - * from DT, but we need this very early because - * without this we cannot talk to pretty much anything - * including serial. - */ - write_gcr_reg0_base(MT7621_PALMBUS_BASE); - write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | - CM_GCR_REGn_MASK_CMTGT_IOCU0); - } if (!register_cps_smp_ops()) return; -- cgit v1.2.3 From 834814e80268c818f354c8f402e0c6604ed75589 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 21 Mar 2018 22:50:19 -0600 Subject: Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it" This reverts commit 2170dd04316e0754cbbfa4892a25aead39d225f7 The intent of commit 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") was to disallow the user from seeing that the device supports INTx if the platform is incapable of enabling it. The detection of this case however incorrectly includes devices which natively do not support INTx, such as SR-IOV VFs, and further discussions reveal gaps even for the target use case. Reported-by: Arjun Vynipadath Fixes: 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index b0f759476900..8a1508a8e481 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -207,9 +207,6 @@ static bool vfio_pci_nointx(struct pci_dev *pdev) } } - if (!pdev->irq) - return true; - return false; } -- cgit v1.2.3 From 3e4543bf20531d1cdb8672d25b3f2ff6d3d07627 Mon Sep 17 00:00:00 2001 From: Pierre-Yves MORDRET Date: Tue, 13 Mar 2018 17:55:35 +0100 Subject: dmaengine: stm32-dmamux: fix a potential buffer overflow The bitfield dma_inuse is allocated of size dma_requests bits, thus a valid bit address is from 0 to (dma_requests - 1). When find_first_zero_bit() fails, it returns dma_requests as invalid address. Using such address for the following set_bit() is incorrect and, if dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer overflow. Currently this driver is only used in DT stm32h743.dtsi where a safe value dma_requests=16 is not triggering the buffer overflow. Fixed by checking the return value of find_first_zero_bit() _before_ using it. Signed-off-by: Antonio Borneo Signed-off-by: Pierre-Yves MORDRET Signed-off-by: Vinod Koul --- drivers/dma/stm32-dmamux.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c index 4dbb30cf94ac..b922db90939a 100644 --- a/drivers/dma/stm32-dmamux.c +++ b/drivers/dma/stm32-dmamux.c @@ -118,14 +118,15 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec, spin_lock_irqsave(&dmamux->lock, flags); mux->chan_id = find_first_zero_bit(dmamux->dma_inuse, dmamux->dma_requests); - set_bit(mux->chan_id, dmamux->dma_inuse); - spin_unlock_irqrestore(&dmamux->lock, flags); if (mux->chan_id == dmamux->dma_requests) { + spin_unlock_irqrestore(&dmamux->lock, flags); dev_err(&pdev->dev, "Run out of free DMA requests\n"); ret = -ENOMEM; - goto error; + goto error_chan_id; } + set_bit(mux->chan_id, dmamux->dma_inuse); + spin_unlock_irqrestore(&dmamux->lock, flags); /* Look for DMA Master */ for (i = 1, min = 0, max = dmamux->dma_reqs[i]; @@ -173,6 +174,8 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec, error: clear_bit(mux->chan_id, dmamux->dma_inuse); + +error_chan_id: kfree(mux); return ERR_PTR(ret); } -- cgit v1.2.3 From f0ba9d699e5ca2bcd07f70185d18720c4f1b597c Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Fri, 16 Mar 2018 11:46:08 +0800 Subject: ALSA: hda/realtek - Fix Dell headset Mic can't record This platform was hardware fixed type for CTIA type for headset port. Assigned 0x19 verb will fix can't record issue. Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5ef056f2aecc..619d1f92b6eb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5501,6 +5501,7 @@ enum { ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, ALC298_FIXUP_TPT470_DOCK, ALC255_FIXUP_DUMMY_LINEOUT_VERB, + ALC255_FIXUP_DELL_HEADSET_MIC, }; static const struct hda_fixup alc269_fixups[] = { @@ -6361,6 +6362,13 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE }, + [ALC255_FIXUP_DELL_HEADSET_MIC] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -6415,6 +6423,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x082a, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE), SND_PCI_QUIRK(0x1028, 0x084b, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), SND_PCI_QUIRK(0x1028, 0x084e, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), + SND_PCI_QUIRK(0x1028, 0x0872, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0873, "Dell Precision 3930", ALC255_FIXUP_DUMMY_LINEOUT_VERB), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), -- cgit v1.2.3 From 88d42b2b45d7208cc872c2c9dec0b1ae6c6008d7 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 14 Mar 2018 16:08:57 +0800 Subject: ALSA: hda/realtek - Fix speaker no sound after system resume It will have a chance speaker no sound after system resume. To toggle NID 0x53 index 0x2 bit 15 will solve this issue. This usage will also suitable with ALC256. Fixes: 4a219ef8f370 ("ALSA: hda/realtek - Add ALC256 HP depop function") Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 619d1f92b6eb..aef1f52db7d9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3130,6 +3130,8 @@ static void alc256_init(struct hda_codec *codec) alc_update_coef_idx(codec, 0x46, 3 << 12, 0); alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */ + alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 1 << 15); /* Clear bit */ + alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 0 << 15); } static void alc256_shutup(struct hda_codec *codec) @@ -7168,6 +7170,8 @@ static int patch_alc269(struct hda_codec *codec) break; case 0x10ec0257: spec->codec_variant = ALC269_TYPE_ALC257; + spec->shutup = alc256_shutup; + spec->init_hook = alc256_init; spec->gen.mixer_nid = 0; break; case 0x10ec0215: -- cgit v1.2.3 From 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 22 Mar 2018 08:56:06 +0100 Subject: ALSA: aloop: Sync stale timer before release The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: Signed-off-by: Takashi Iwai --- sound/drivers/aloop.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 0333143a1fa7..0a08e63e9c66 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -192,6 +192,11 @@ static inline void loopback_timer_stop(struct loopback_pcm *dpcm) dpcm->timer.expires = 0; } +static inline void loopback_timer_stop_sync(struct loopback_pcm *dpcm) +{ + del_timer_sync(&dpcm->timer); +} + #define CABLE_VALID_PLAYBACK (1 << SNDRV_PCM_STREAM_PLAYBACK) #define CABLE_VALID_CAPTURE (1 << SNDRV_PCM_STREAM_CAPTURE) #define CABLE_VALID_BOTH (CABLE_VALID_PLAYBACK|CABLE_VALID_CAPTURE) @@ -326,6 +331,8 @@ static int loopback_prepare(struct snd_pcm_substream *substream) struct loopback_cable *cable = dpcm->cable; int bps, salign; + loopback_timer_stop_sync(dpcm); + salign = (snd_pcm_format_width(runtime->format) * runtime->channels) / 8; bps = salign * runtime->rate; @@ -744,7 +751,7 @@ static int loopback_close(struct snd_pcm_substream *substream) struct loopback *loopback = substream->private_data; struct loopback_pcm *dpcm = substream->runtime->private_data; - loopback_timer_stop(dpcm); + loopback_timer_stop_sync(dpcm); mutex_lock(&loopback->cable_lock); free_cable(substream); mutex_unlock(&loopback->cable_lock); -- cgit v1.2.3 From 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 22 Mar 2018 10:40:27 +0100 Subject: ALSA: aloop: Fix access to not-yet-ready substream via cable In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: Signed-off-by: Takashi Iwai --- sound/drivers/aloop.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 0a08e63e9c66..1063a4377502 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -666,7 +666,9 @@ static void free_cable(struct snd_pcm_substream *substream) return; if (cable->streams[!substream->stream]) { /* other stream is still alive */ + spin_lock_irq(&cable->lock); cable->streams[substream->stream] = NULL; + spin_unlock_irq(&cable->lock); } else { /* free the cable */ loopback->cables[substream->number][dev] = NULL; @@ -705,7 +707,6 @@ static int loopback_open(struct snd_pcm_substream *substream) loopback->cables[substream->number][dev] = cable; } dpcm->cable = cable; - cable->streams[substream->stream] = dpcm; snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); @@ -737,6 +738,11 @@ static int loopback_open(struct snd_pcm_substream *substream) runtime->hw = loopback_pcm_hardware; else runtime->hw = cable->hw; + + spin_lock_irq(&cable->lock); + cable->streams[substream->stream] = dpcm; + spin_unlock_irq(&cable->lock); + unlock: if (err < 0) { free_cable(substream); -- cgit v1.2.3 From 19b558db12f9f4e45a22012bae7b4783e62224da Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 15 Feb 2018 17:21:55 +0100 Subject: posix-timers: Protect posix clock array access against speculation The clockid argument of clockid_to_kclock() comes straight from user space via various syscalls and is used as index into the posix_clocks array. Protect it against spectre v1 array out of bounds speculation. Remove the redundant check for !posix_clock[id] as this is another source for speculation and does not provide any advantage over the return posix_clock[id] path which returns NULL in that case anyway. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Acked-by: Dan Williams Cc: Rasmus Villemoes Cc: Greg KH Cc: stable@vger.kernel.org Cc: Linus Torvalds Cc: David Woodhouse Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802151718320.1296@nanos.tec.linutronix.de --- kernel/time/posix-timers.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c index 75043046914e..10b7186d0638 100644 --- a/kernel/time/posix-timers.c +++ b/kernel/time/posix-timers.c @@ -50,6 +50,7 @@ #include #include #include +#include #include "timekeeping.h" #include "posix-timers.h" @@ -1346,11 +1347,15 @@ static const struct k_clock * const posix_clocks[] = { static const struct k_clock *clockid_to_kclock(const clockid_t id) { - if (id < 0) + clockid_t idx = id; + + if (id < 0) { return (id & CLOCKFD_MASK) == CLOCKFD ? &clock_posix_dynamic : &clock_posix_cpu; + } - if (id >= ARRAY_SIZE(posix_clocks) || !posix_clocks[id]) + if (id >= ARRAY_SIZE(posix_clocks)) return NULL; - return posix_clocks[id]; + + return posix_clocks[array_index_nospec(idx, ARRAY_SIZE(posix_clocks))]; } -- cgit v1.2.3 From aebfa52a925d701114afd6af0def35bab16d4f47 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 22 Mar 2018 11:08:50 +0100 Subject: netfilter: drop template ct when conntrack is skipped. The ipv4 nf_ct code currently skips the nf_conntrak_in() call for fragmented packets. As a results later matches/target can end up manipulating template ct entry instead of 'real' ones. Exploiting the above, syzbot found a way to trigger the following splat: WARNING: CPU: 1 PID: 4242 at net/netfilter/xt_cluster.c:55 xt_cluster_mt+0x6c1/0x840 net/netfilter/xt_cluster.c:127 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4242 Comm: syzkaller027971 Not tainted 4.16.0-rc2+ #243 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x211/0x2d0 lib/bug.c:184 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x58/0x80 arch/x86/entry/entry_64.S:957 RIP: 0010:xt_cluster_hash net/netfilter/xt_cluster.c:55 [inline] RIP: 0010:xt_cluster_mt+0x6c1/0x840 net/netfilter/xt_cluster.c:127 RSP: 0018:ffff8801d2f6f2d0 EFLAGS: 00010293 RAX: ffff8801af700540 RBX: 0000000000000000 RCX: ffffffff84a2d1e1 RDX: 0000000000000000 RSI: ffff8801d2f6f478 RDI: ffff8801cafd336a RBP: ffff8801d2f6f2e8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801b03b3d18 R13: ffff8801cafd3300 R14: dffffc0000000000 R15: ffff8801d2f6f478 ipt_do_table+0xa91/0x19b0 net/ipv4/netfilter/ip_tables.c:296 iptable_filter_hook+0x65/0x80 net/ipv4/netfilter/iptable_filter.c:41 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] NF_HOOK include/linux/netfilter.h:286 [inline] raw_send_hdrinc.isra.17+0xf39/0x1880 net/ipv4/raw.c:432 raw_sendmsg+0x14cd/0x26b0 net/ipv4/raw.c:669 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 SYSC_sendto+0x361/0x5c0 net/socket.c:1748 SyS_sendto+0x40/0x50 net/socket.c:1716 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x441b49 RSP: 002b:00007ffff5ca8b18 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441b49 RDX: 0000000000000030 RSI: 0000000020ff7000 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 000000002066354c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000403470 R13: 0000000000403500 R14: 0000000000000000 R15: 0000000000000000 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. Instead of adding checks for template ct on every target/match manipulating skb->_nfct, simply drop the template ct when skipping nf_conntrack_in(). Fixes: 7b4fdf77a450ec ("netfilter: don't track fragmented packets") Reported-and-tested-by: syzbot+0346441ae0545cfcea3a@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index b50721d9d30e..9db988f9a4d7 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -154,8 +154,20 @@ static unsigned int ipv4_conntrack_local(void *priv, struct sk_buff *skb, const struct nf_hook_state *state) { - if (ip_is_fragment(ip_hdr(skb))) /* IP_NODEFRAG setsockopt set */ + if (ip_is_fragment(ip_hdr(skb))) { /* IP_NODEFRAG setsockopt set */ + enum ip_conntrack_info ctinfo; + struct nf_conn *tmpl; + + tmpl = nf_ct_get(skb, &ctinfo); + if (tmpl && nf_ct_is_template(tmpl)) { + /* when skipping ct, clear templates to avoid fooling + * later targets/matches + */ + skb->_nfct = 0; + nf_ct_put(tmpl); + } return NF_ACCEPT; + } return nf_conntrack_in(state->net, PF_INET, state->hook, skb); } -- cgit v1.2.3 From d92191aa84e5f187d543867c3d54b38f294833fa Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 21 Mar 2018 13:55:42 +0100 Subject: netfilter: nf_tables: cache device name in flowtable object Devices going away have to grab the nfnl_lock from the netdev event path to avoid races with control plane updates. However, netlink dumps in netfilter do not hold nfnl_lock mutex. Cache the device name into the objects to avoid an use-after-free situation for a device that is going away. Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 4 ++++ net/netfilter/nf_tables_api.c | 15 +++++++++------ 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 663b015dace5..30eb0652b025 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -1068,6 +1068,8 @@ struct nft_object_ops { int nft_register_obj(struct nft_object_type *obj_type); void nft_unregister_obj(struct nft_object_type *obj_type); +#define NFT_FLOWTABLE_DEVICE_MAX 8 + /** * struct nft_flowtable - nf_tables flow table * @@ -1080,6 +1082,7 @@ void nft_unregister_obj(struct nft_object_type *obj_type); * @genmask: generation mask * @use: number of references to this flow table * @handle: unique object handle + * @dev_name: array of device names * @data: rhashtable and garbage collector * @ops: array of hooks */ @@ -1093,6 +1096,7 @@ struct nft_flowtable { u32 genmask:2, use:30; u64 handle; + char *dev_name[NFT_FLOWTABLE_DEVICE_MAX]; /* runtime data below here */ struct nf_hook_ops *ops ____cacheline_aligned; struct nf_flowtable data; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 14777c404071..977d43e00f98 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4932,8 +4932,6 @@ nf_tables_flowtable_lookup_byhandle(const struct nft_table *table, return ERR_PTR(-ENOENT); } -#define NFT_FLOWTABLE_DEVICE_MAX 8 - static int nf_tables_parse_devices(const struct nft_ctx *ctx, const struct nlattr *attr, struct net_device *dev_array[], int *len) @@ -5006,7 +5004,7 @@ static int nf_tables_flowtable_parse_hook(const struct nft_ctx *ctx, err = nf_tables_parse_devices(ctx, tb[NFTA_FLOWTABLE_HOOK_DEVS], dev_array, &n); if (err < 0) - goto err1; + return err; ops = kzalloc(sizeof(struct nf_hook_ops) * n, GFP_KERNEL); if (!ops) { @@ -5026,6 +5024,8 @@ static int nf_tables_flowtable_parse_hook(const struct nft_ctx *ctx, flowtable->ops[i].priv = &flowtable->data.rhashtable; flowtable->ops[i].hook = flowtable->data.type->hook; flowtable->ops[i].dev = dev_array[i]; + flowtable->dev_name[i] = kstrdup(dev_array[i]->name, + GFP_KERNEL); } err = 0; @@ -5203,8 +5203,10 @@ static int nf_tables_newflowtable(struct net *net, struct sock *nlsk, err5: i = flowtable->ops_len; err4: - for (k = i - 1; k >= 0; k--) + for (k = i - 1; k >= 0; k--) { + kfree(flowtable->dev_name[k]); nf_unregister_net_hook(net, &flowtable->ops[k]); + } kfree(flowtable->ops); err3: @@ -5294,9 +5296,9 @@ static int nf_tables_fill_flowtable_info(struct sk_buff *skb, struct net *net, goto nla_put_failure; for (i = 0; i < flowtable->ops_len; i++) { - if (flowtable->ops[i].dev && + if (flowtable->dev_name[i][0] && nla_put_string(skb, NFTA_DEVICE_NAME, - flowtable->ops[i].dev->name)) + flowtable->dev_name[i])) goto nla_put_failure; } nla_nest_end(skb, nest_devs); @@ -5538,6 +5540,7 @@ static void nft_flowtable_event(unsigned long event, struct net_device *dev, continue; nf_unregister_net_hook(dev_net(dev), &flowtable->ops[i]); + flowtable->dev_name[i][0] = '\0'; flowtable->ops[i].dev = NULL; break; } -- cgit v1.2.3 From 90d2723c6d4cb2ace50fc3b932a2bcc77710450b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 20 Mar 2018 17:00:19 +0100 Subject: netfilter: nf_tables: do not hold reference on netdevice from preparation phase The netfilter netdevice event handler hold the nfnl_lock mutex, this avoids races with a device going away while such device is being attached to hooks from the netlink control plane. Therefore, either control plane bails out with ENOENT or netdevice event path waits until the hook that is attached to net_device is registered. Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 977d43e00f98..530e12ae52d7 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1288,8 +1288,6 @@ static void nf_tables_chain_destroy(struct nft_chain *chain) free_percpu(basechain->stats); if (basechain->stats) static_branch_dec(&nft_counters_enabled); - if (basechain->ops.dev != NULL) - dev_put(basechain->ops.dev); kfree(chain->name); kfree(basechain); } else { @@ -1356,7 +1354,7 @@ static int nft_chain_parse_hook(struct net *net, } nla_strlcpy(ifname, ha[NFTA_HOOK_DEV], IFNAMSIZ); - dev = dev_get_by_name(net, ifname); + dev = __dev_get_by_name(net, ifname); if (!dev) { module_put(type->owner); return -ENOENT; @@ -1373,8 +1371,6 @@ static int nft_chain_parse_hook(struct net *net, static void nft_chain_release_hook(struct nft_chain_hook *hook) { module_put(hook->type->owner); - if (hook->dev != NULL) - dev_put(hook->dev); } static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, @@ -4948,7 +4944,7 @@ static int nf_tables_parse_devices(const struct nft_ctx *ctx, } nla_strlcpy(ifname, tmp, IFNAMSIZ); - dev = dev_get_by_name(ctx->net, ifname); + dev = __dev_get_by_name(ctx->net, ifname); if (!dev) { err = -ENOENT; goto err1; @@ -5007,10 +5003,8 @@ static int nf_tables_flowtable_parse_hook(const struct nft_ctx *ctx, return err; ops = kzalloc(sizeof(struct nf_hook_ops) * n, GFP_KERNEL); - if (!ops) { - err = -ENOMEM; - goto err1; - } + if (!ops) + return -ENOMEM; flowtable->hooknum = hooknum; flowtable->priority = priority; @@ -5028,11 +5022,6 @@ static int nf_tables_flowtable_parse_hook(const struct nft_ctx *ctx, GFP_KERNEL); } - err = 0; -err1: - for (i = 0; i < n; i++) - dev_put(dev_array[i]); - return err; } -- cgit v1.2.3 From 9a02d3af9ce9fcca751da1d4b5663b7a825d5957 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 20 Mar 2018 10:11:44 +0100 Subject: drm/tegra: dc: Use correct format array for Tegra124 Use tegra124_(primary|overlay)_formats for Tegra124, otherwise the count specified in the Tegra124 SoC info structure will be different from the array size and cause a crash. Fixes: 511c7023cf23 ("drm/tegra: dc: Support more formats") Signed-off-by: Stefan Agner Acked-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index fbffe1948b3b..c1a5ae8faaef 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -2009,9 +2009,9 @@ static const struct tegra_dc_soc_info tegra124_dc_soc_info = { .coupled_pm = false, .has_nvdisplay = false, .num_primary_formats = ARRAY_SIZE(tegra124_primary_formats), - .primary_formats = tegra114_primary_formats, + .primary_formats = tegra124_primary_formats, .num_overlay_formats = ARRAY_SIZE(tegra124_overlay_formats), - .overlay_formats = tegra114_overlay_formats, + .overlay_formats = tegra124_overlay_formats, }; static const struct tegra_dc_soc_info tegra210_dc_soc_info = { -- cgit v1.2.3 From ff6781fd1bb404d8a551c02c35c70cec1da17ff1 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Wed, 21 Mar 2018 12:22:28 +1000 Subject: powerpc/64s: Fix lost pending interrupt due to race causing lost update to irq_happened force_external_irq_replay() can be called in the do_IRQ path with interrupts hard enabled and soft disabled if may_hard_irq_enable() set MSR[EE]=1. It updates local_paca->irq_happened with a load, modify, store sequence. If a maskable interrupt hits during this sequence, it will go to the masked handler to be marked pending in irq_happened. This update will be lost when the interrupt returns and the store instruction executes. This can result in unpredictable latencies, timeouts, lockups, etc. Fix this by ensuring hard interrupts are disabled before modifying irq_happened. This could cause any maskable asynchronous interrupt to get lost, but it was noticed on P9 SMP system doing RDMA NVMe target over 100GbE, so very high external interrupt rate and high IPI rate. The hang was bisected down to enabling doorbell interrupts for IPIs. These provided an interrupt type that could run at high rates in the do_IRQ path, stressing the race. Fixes: 1d607bb3bd60 ("powerpc/irq: Add mechanism to force a replay of interrupts") Cc: stable@vger.kernel.org # v4.8+ Reported-by: Carol L. Soto Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/irq.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index f88038847790..061aa0f47bb1 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -476,6 +476,14 @@ void force_external_irq_replay(void) */ WARN_ON(!arch_irqs_disabled()); + /* + * Interrupts must always be hard disabled before irq_happened is + * modified (to prevent lost update in case of interrupt between + * load and store). + */ + __hard_irq_disable(); + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; + /* Indicate in the PACA that we have an interrupt to replay */ local_paca->irq_happened |= PACA_IRQ_EE; } -- cgit v1.2.3 From cda4a14733138b8f15b0b69d97ec198dc41eccae Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 22 Mar 2018 09:48:54 +1100 Subject: KVM: PPC: Book3S HV: Fix duplication of host SLB entries Since commit 6964e6a4e489 ("KVM: PPC: Book3S HV: Do SLB load/unload with guest LPCR value loaded", 2018-01-11), we have been seeing occasional machine check interrupts on POWER8 systems when running KVM guests, due to SLB multihit errors. This turns out to be due to the guest exit code reloading the host SLB entries from the SLB shadow buffer when the SLB was not previously cleared in the guest entry path. This can happen because the path which skips from the guest entry code to the guest exit code without entering the guest now does the skip before the SLB is cleared and loaded with guest values, but the host values are loaded after the point in the guest exit path that we skip to. To fix this, we move the code that reloads the host SLB values up so that it occurs just before the point in the guest exit code (the label guest_bypass:) where we skip to from the guest entry path. Reported-by: Alexey Kardashevskiy Fixes: 6964e6a4e489 ("KVM: PPC: Book3S HV: Do SLB load/unload with guest LPCR value loaded") Tested-by: Alexey Kardashevskiy Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 35 +++++++++++++++++---------------- 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index d33264697a31..f86a20270e50 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1557,6 +1557,24 @@ mc_cont: ptesync 3: stw r5,VCPU_SLB_MAX(r9) + /* load host SLB entries */ +BEGIN_MMU_FTR_SECTION + b 0f +END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) + ld r8,PACA_SLBSHADOWPTR(r13) + + .rept SLB_NUM_BOLTED + li r3, SLBSHADOW_SAVEAREA + LDX_BE r5, r8, r3 + addi r3, r3, 8 + LDX_BE r6, r8, r3 + andis. r7,r5,SLB_ESID_V@h + beq 1f + slbmte r6,r5 +1: addi r8,r8,16 + .endr +0: + guest_bypass: stw r12, STACK_SLOT_TRAP(r1) mr r3, r12 @@ -2018,23 +2036,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) mtspr SPRN_LPCR,r8 isync 48: - /* load host SLB entries */ -BEGIN_MMU_FTR_SECTION - b 0f -END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) - ld r8,PACA_SLBSHADOWPTR(r13) - - .rept SLB_NUM_BOLTED - li r3, SLBSHADOW_SAVEAREA - LDX_BE r5, r8, r3 - addi r3, r3, 8 - LDX_BE r6, r8, r3 - andis. r7,r5,SLB_ESID_V@h - beq 1f - slbmte r6,r5 -1: addi r8,r8,16 - .endr -0: #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING /* Finish timing, if we have a vcpu */ ld r4, HSTATE_KVM_VCPU(r13) -- cgit v1.2.3 From aff6f8cb3e2170b9e58b0932bce7bfb492775e23 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 23 Mar 2018 09:29:05 +1100 Subject: powerpc/mm: Add tracking of the number of coprocessors using a context Currently, when using coprocessors (which use the Nest MMU), we simply increment the active_cpu count to force all TLB invalidations to be come broadcast. Unfortunately, due to an errata in POWER9, we will need to know more specifically that coprocessors are in use. This maintains a separate copros counter in the MMU context for that purpose. NB. The commit mentioned in the fixes tag below is not at fault for the bug we're fixing in this commit and the next, but this fix applies on top the infrastructure it introduced. Fixes: 03b8abedf4f4 ("cxl: Enable global TLBIs for cxl contexts") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Benjamin Herrenschmidt Tested-by: Balbir Singh Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/64/mmu.h | 3 +++ arch/powerpc/include/asm/mmu_context.h | 18 +++++++++++++----- arch/powerpc/mm/mmu_context_book3s64.c | 1 + 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h index 0abeb0e2d616..37671feb2bf6 100644 --- a/arch/powerpc/include/asm/book3s/64/mmu.h +++ b/arch/powerpc/include/asm/book3s/64/mmu.h @@ -87,6 +87,9 @@ typedef struct { /* Number of bits in the mm_cpumask */ atomic_t active_cpus; + /* Number of users of the external (Nest) MMU */ + atomic_t copros; + /* NPU NMMU context */ struct npu_context *npu_context; diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index 051b3d63afe3..3a15b6db9501 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -92,15 +92,23 @@ static inline void dec_mm_active_cpus(struct mm_struct *mm) static inline void mm_context_add_copro(struct mm_struct *mm) { /* - * On hash, should only be called once over the lifetime of - * the context, as we can't decrement the active cpus count - * and flush properly for the time being. + * If any copro is in use, increment the active CPU count + * in order to force TLB invalidations to be global as to + * propagate to the Nest MMU. */ - inc_mm_active_cpus(mm); + if (atomic_inc_return(&mm->context.copros) == 1) + inc_mm_active_cpus(mm); } static inline void mm_context_remove_copro(struct mm_struct *mm) { + int c; + + c = atomic_dec_if_positive(&mm->context.copros); + + /* Detect imbalance between add and remove */ + WARN_ON(c < 0); + /* * Need to broadcast a global flush of the full mm before * decrementing active_cpus count, as the next TLBI may be @@ -111,7 +119,7 @@ static inline void mm_context_remove_copro(struct mm_struct *mm) * for the time being. Invalidations will remain global if * used on hash. */ - if (radix_enabled()) { + if (c == 0 && radix_enabled()) { flush_all_mm(mm); dec_mm_active_cpus(mm); } diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c index 929d9ef7083f..3f980baade4c 100644 --- a/arch/powerpc/mm/mmu_context_book3s64.c +++ b/arch/powerpc/mm/mmu_context_book3s64.c @@ -173,6 +173,7 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) mm_iommu_init(mm); #endif atomic_set(&mm->context.active_cpus, 0); + atomic_set(&mm->context.copros, 0); return 0; } -- cgit v1.2.3 From 80a4ae202f2d319eced8bbf612a4e8b0f11c21f5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 23 Mar 2018 09:29:06 +1100 Subject: powerpc/mm: Workaround Nest MMU bug with TLB invalidations On POWER9 the Nest MMU may fail to invalidate some translations when doing a tlbie "by PID" or "by LPID" that is targeted at the TLB only and not the page walk cache. This works around it by forcing such invalidations to escalate to RIC=2 (full invalidation of TLB *and* PWC) when a coprocessor is in use for the context. Fixes: 03b8abedf4f4 ("cxl: Enable global TLBIs for cxl contexts") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Balbir Singh [balbirs: fixed spelling and coding style to quiesce checkpatch.pl] Tested-by: Balbir Singh Signed-off-by: Michael Ellerman --- arch/powerpc/mm/tlb-radix.c | 50 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 43 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c index 71d1b19ad1c0..8e4c6cb4a808 100644 --- a/arch/powerpc/mm/tlb-radix.c +++ b/arch/powerpc/mm/tlb-radix.c @@ -151,7 +151,23 @@ static inline void _tlbiel_pid(unsigned long pid, unsigned long ric) static inline void _tlbie_pid(unsigned long pid, unsigned long ric) { asm volatile("ptesync": : :"memory"); - __tlbie_pid(pid, ric); + + /* + * Workaround the fact that the "ric" argument to __tlbie_pid + * must be a compile-time contraint to match the "i" constraint + * in the asm statement. + */ + switch (ric) { + case RIC_FLUSH_TLB: + __tlbie_pid(pid, RIC_FLUSH_TLB); + break; + case RIC_FLUSH_PWC: + __tlbie_pid(pid, RIC_FLUSH_PWC); + break; + case RIC_FLUSH_ALL: + default: + __tlbie_pid(pid, RIC_FLUSH_ALL); + } asm volatile("eieio; tlbsync; ptesync": : :"memory"); } @@ -311,6 +327,16 @@ void radix__local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmadd } EXPORT_SYMBOL(radix__local_flush_tlb_page); +static bool mm_needs_flush_escalation(struct mm_struct *mm) +{ + /* + * P9 nest MMU has issues with the page walk cache + * caching PTEs and not flushing them properly when + * RIC = 0 for a PID/LPID invalidate + */ + return atomic_read(&mm->context.copros) != 0; +} + #ifdef CONFIG_SMP void radix__flush_tlb_mm(struct mm_struct *mm) { @@ -321,9 +347,12 @@ void radix__flush_tlb_mm(struct mm_struct *mm) return; preempt_disable(); - if (!mm_is_thread_local(mm)) - _tlbie_pid(pid, RIC_FLUSH_TLB); - else + if (!mm_is_thread_local(mm)) { + if (mm_needs_flush_escalation(mm)) + _tlbie_pid(pid, RIC_FLUSH_ALL); + else + _tlbie_pid(pid, RIC_FLUSH_TLB); + } else _tlbiel_pid(pid, RIC_FLUSH_TLB); preempt_enable(); } @@ -435,10 +464,14 @@ void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } if (full) { - if (local) + if (local) { _tlbiel_pid(pid, RIC_FLUSH_TLB); - else - _tlbie_pid(pid, RIC_FLUSH_TLB); + } else { + if (mm_needs_flush_escalation(mm)) + _tlbie_pid(pid, RIC_FLUSH_ALL); + else + _tlbie_pid(pid, RIC_FLUSH_TLB); + } } else { bool hflush = false; unsigned long hstart, hend; @@ -548,6 +581,9 @@ static inline void __radix__flush_tlb_range_psize(struct mm_struct *mm, } if (full) { + if (!local && mm_needs_flush_escalation(mm)) + also_pwc = true; + if (local) _tlbiel_pid(pid, also_pwc ? RIC_FLUSH_ALL : RIC_FLUSH_TLB); else -- cgit v1.2.3 From 99491e2d0e50c53a0620dfec340b249d08f5968f Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 23 Mar 2018 10:26:25 +0530 Subject: powerpc/mm/radix: Remove unused code These function are not used in the code. Remove them. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- .../powerpc/include/asm/book3s/64/tlbflush-radix.h | 3 -- arch/powerpc/mm/tlb-radix.c | 40 ---------------------- 2 files changed, 43 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h index 8eea90f80e45..19b45ba6caf9 100644 --- a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h @@ -47,9 +47,6 @@ extern void radix__flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmad #endif extern void radix__flush_tlb_pwc(struct mmu_gather *tlb, unsigned long addr); extern void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr); -extern void radix__flush_tlb_lpid_va(unsigned long lpid, unsigned long gpa, - unsigned long page_size); -extern void radix__flush_tlb_lpid(unsigned long lpid); extern void radix__flush_tlb_all(void); extern void radix__flush_tlb_pte_p9_dd1(unsigned long old_pte, struct mm_struct *mm, unsigned long address); diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c index 8e4c6cb4a808..e47ee8c867c5 100644 --- a/arch/powerpc/mm/tlb-radix.c +++ b/arch/powerpc/mm/tlb-radix.c @@ -639,46 +639,6 @@ void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr) } #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ -void radix__flush_tlb_lpid_va(unsigned long lpid, unsigned long gpa, - unsigned long page_size) -{ - unsigned long rb,rs,prs,r; - unsigned long ap; - unsigned long ric = RIC_FLUSH_TLB; - - ap = mmu_get_ap(radix_get_mmu_psize(page_size)); - rb = gpa & ~(PPC_BITMASK(52, 63)); - rb |= ap << PPC_BITLSHIFT(58); - rs = lpid & ((1UL << 32) - 1); - prs = 0; /* process scoped */ - r = 1; /* raidx format */ - - asm volatile("ptesync": : :"memory"); - asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1) - : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); - asm volatile("eieio; tlbsync; ptesync": : :"memory"); - trace_tlbie(lpid, 0, rb, rs, ric, prs, r); -} -EXPORT_SYMBOL(radix__flush_tlb_lpid_va); - -void radix__flush_tlb_lpid(unsigned long lpid) -{ - unsigned long rb,rs,prs,r; - unsigned long ric = RIC_FLUSH_ALL; - - rb = 0x2 << PPC_BITLSHIFT(53); /* IS = 2 */ - rs = lpid & ((1UL << 32) - 1); - prs = 0; /* partition scoped */ - r = 1; /* raidx format */ - - asm volatile("ptesync": : :"memory"); - asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1) - : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); - asm volatile("eieio; tlbsync; ptesync": : :"memory"); - trace_tlbie(lpid, 0, rb, rs, ric, prs, r); -} -EXPORT_SYMBOL(radix__flush_tlb_lpid); - void radix__flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { -- cgit v1.2.3 From 243fee3249ff78e5f7ab822139dc89719def82d2 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 23 Mar 2018 10:26:26 +0530 Subject: powerpc/mm/radix: Move the functions that does the actual tlbie closer No functionality change. Just code movement to ease code changes later Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/mm/tlb-radix.c | 64 ++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c index e47ee8c867c5..74354c26d316 100644 --- a/arch/powerpc/mm/tlb-radix.c +++ b/arch/powerpc/mm/tlb-radix.c @@ -119,6 +119,38 @@ static inline void __tlbie_pid(unsigned long pid, unsigned long ric) trace_tlbie(0, 0, rb, rs, ric, prs, r); } +static inline void __tlbiel_va(unsigned long va, unsigned long pid, + unsigned long ap, unsigned long ric) +{ + unsigned long rb,rs,prs,r; + + rb = va & ~(PPC_BITMASK(52, 63)); + rb |= ap << PPC_BITLSHIFT(58); + rs = pid << PPC_BITLSHIFT(31); + prs = 1; /* process scoped */ + r = 1; /* raidx format */ + + asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1) + : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); + trace_tlbie(0, 1, rb, rs, ric, prs, r); +} + +static inline void __tlbie_va(unsigned long va, unsigned long pid, + unsigned long ap, unsigned long ric) +{ + unsigned long rb,rs,prs,r; + + rb = va & ~(PPC_BITMASK(52, 63)); + rb |= ap << PPC_BITLSHIFT(58); + rs = pid << PPC_BITLSHIFT(31); + prs = 1; /* process scoped */ + r = 1; /* raidx format */ + + asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1) + : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); + trace_tlbie(0, 0, rb, rs, ric, prs, r); +} + /* * We use 128 set in radix mode and 256 set in hpt mode. */ @@ -171,22 +203,6 @@ static inline void _tlbie_pid(unsigned long pid, unsigned long ric) asm volatile("eieio; tlbsync; ptesync": : :"memory"); } -static inline void __tlbiel_va(unsigned long va, unsigned long pid, - unsigned long ap, unsigned long ric) -{ - unsigned long rb,rs,prs,r; - - rb = va & ~(PPC_BITMASK(52, 63)); - rb |= ap << PPC_BITLSHIFT(58); - rs = pid << PPC_BITLSHIFT(31); - prs = 1; /* process scoped */ - r = 1; /* raidx format */ - - asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1) - : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); - trace_tlbie(0, 1, rb, rs, ric, prs, r); -} - static inline void __tlbiel_va_range(unsigned long start, unsigned long end, unsigned long pid, unsigned long page_size, unsigned long psize) @@ -219,22 +235,6 @@ static inline void _tlbiel_va_range(unsigned long start, unsigned long end, asm volatile("ptesync": : :"memory"); } -static inline void __tlbie_va(unsigned long va, unsigned long pid, - unsigned long ap, unsigned long ric) -{ - unsigned long rb,rs,prs,r; - - rb = va & ~(PPC_BITMASK(52, 63)); - rb |= ap << PPC_BITLSHIFT(58); - rs = pid << PPC_BITLSHIFT(31); - prs = 1; /* process scoped */ - r = 1; /* raidx format */ - - asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1) - : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); - trace_tlbie(0, 0, rb, rs, ric, prs, r); -} - static inline void __tlbie_va_range(unsigned long start, unsigned long end, unsigned long pid, unsigned long page_size, unsigned long psize) -- cgit v1.2.3 From 9a3fb9fb84cc30577c1b012a6a3efda944684291 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 19 Mar 2018 07:15:39 +0100 Subject: xfrm: Fix transport mode skb control buffer usage. A recent commit introduced a new struct xfrm_trans_cb that is used with the sk_buff control buffer. Unfortunately it placed the structure in front of the control buffer and overlooked that the IPv4/IPv6 control buffer is still needed for some layer 4 protocols. As a result the IPv4/IPv6 control buffer is overwritten with this structure. Fix this by setting a apropriate header in front of the structure. Fixes acf568ee859f ("xfrm: Reinject transport-mode packets ...") Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_input.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c index 1472c0857975..81788105c164 100644 --- a/net/xfrm/xfrm_input.c +++ b/net/xfrm/xfrm_input.c @@ -26,6 +26,12 @@ struct xfrm_trans_tasklet { }; struct xfrm_trans_cb { + union { + struct inet_skb_parm h4; +#if IS_ENABLED(CONFIG_IPV6) + struct inet6_skb_parm h6; +#endif + } header; int (*finish)(struct net *net, struct sock *sk, struct sk_buff *skb); }; -- cgit v1.2.3 From a5d4b5891c2f1f865a2def1eb0030f534e77ff86 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 23 Mar 2018 10:26:27 +0530 Subject: powerpc/mm: Fixup tlbie vs store ordering issue on POWER9 On POWER9, under some circumstances, a broadcast TLB invalidation might complete before all previous stores have drained, potentially allowing stale stores from becoming visible after the invalidation. This works around it by doubling up those TLB invalidations which was verified by HW to be sufficient to close the risk window. This will be documented in a yet-to-be-published errata. Fixes: 1a472c9dba6b ("powerpc/mm/radix: Add tlbflush routines") Signed-off-by: Aneesh Kumar K.V [mpe: Enable the feature in the DT CPU features code for all Power9, rename the feature to CPU_FTR_P9_TLBIE_BUG per benh.] Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/cputable.h | 3 ++- arch/powerpc/kernel/dt_cpu_ftrs.c | 3 +++ arch/powerpc/kvm/book3s_64_mmu_radix.c | 3 +++ arch/powerpc/kvm/book3s_hv_rm_mmu.c | 11 +++++++++++ arch/powerpc/mm/hash_native_64.c | 16 +++++++++++++++- arch/powerpc/mm/pgtable_64.c | 1 + arch/powerpc/mm/tlb-radix.c | 15 +++++++++++++++ 7 files changed, 50 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index a2c5c95882cf..2e2bacbdf6ed 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -203,6 +203,7 @@ static inline void cpu_feature_keys_init(void) { } #define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000) #define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000) #define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x1000000000000000) +#define CPU_FTR_P9_TLBIE_BUG LONG_ASM_CONST(0x2000000000000000) #define CPU_FTR_POWER9_DD1 LONG_ASM_CONST(0x4000000000000000) #define CPU_FTR_POWER9_DD2_1 LONG_ASM_CONST(0x8000000000000000) @@ -465,7 +466,7 @@ static inline void cpu_feature_keys_init(void) { } CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \ CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | \ - CPU_FTR_PKEY) + CPU_FTR_PKEY | CPU_FTR_P9_TLBIE_BUG) #define CPU_FTRS_POWER9_DD1 ((CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD1) & \ (~CPU_FTR_SAO)) #define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9 diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c index 0bcfb0f256e1..8ca5d5b74618 100644 --- a/arch/powerpc/kernel/dt_cpu_ftrs.c +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c @@ -709,6 +709,9 @@ static __init void cpufeatures_cpu_quirks(void) cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD1; else if ((version & 0xffffefff) == 0x004e0201) cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1; + + if ((version & 0xffff0000) == 0x004e0000) + cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG; } static void __init cpufeatures_setup_finished(void) diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c index 0c854816e653..0837b9738d76 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_radix.c +++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c @@ -157,6 +157,9 @@ static void kvmppc_radix_tlbie_page(struct kvm *kvm, unsigned long addr, asm volatile("ptesync": : :"memory"); asm volatile(PPC_TLBIE_5(%0, %1, 0, 0, 1) : : "r" (addr), "r" (kvm->arch.lpid) : "memory"); + if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) + asm volatile(PPC_TLBIE_5(%0, %1, 0, 0, 1) + : : "r" (addr), "r" (kvm->arch.lpid) : "memory"); asm volatile("ptesync": : :"memory"); } diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c index 8888e625a999..e1c083fbe434 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c +++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c @@ -473,6 +473,17 @@ static void do_tlbies(struct kvm *kvm, unsigned long *rbvalues, trace_tlbie(kvm->arch.lpid, 0, rbvalues[i], kvm->arch.lpid, 0, 0, 0); } + + if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) { + /* + * Need the extra ptesync to make sure we don't + * re-order the tlbie + */ + asm volatile("ptesync": : :"memory"); + asm volatile(PPC_TLBIE_5(%0,%1,0,0,0) : : + "r" (rbvalues[0]), "r" (kvm->arch.lpid)); + } + asm volatile("eieio; tlbsync; ptesync" : : : "memory"); kvm->arch.tlbie_lock = 0; } else { diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index a0675e91ad7d..656933c85925 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -201,6 +201,15 @@ static inline unsigned long ___tlbie(unsigned long vpn, int psize, return va; } +static inline void fixup_tlbie(unsigned long vpn, int psize, int apsize, int ssize) +{ + if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) { + /* Need the extra ptesync to ensure we don't reorder tlbie*/ + asm volatile("ptesync": : :"memory"); + ___tlbie(vpn, psize, apsize, ssize); + } +} + static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize) { unsigned long rb; @@ -278,6 +287,7 @@ static inline void tlbie(unsigned long vpn, int psize, int apsize, asm volatile("ptesync": : :"memory"); } else { __tlbie(vpn, psize, apsize, ssize); + fixup_tlbie(vpn, psize, apsize, ssize); asm volatile("eieio; tlbsync; ptesync": : :"memory"); } if (lock_tlbie && !use_local) @@ -771,7 +781,7 @@ static void native_hpte_clear(void) */ static void native_flush_hash_range(unsigned long number, int local) { - unsigned long vpn; + unsigned long vpn = 0; unsigned long hash, index, hidx, shift, slot; struct hash_pte *hptep; unsigned long hpte_v; @@ -843,6 +853,10 @@ static void native_flush_hash_range(unsigned long number, int local) __tlbie(vpn, psize, psize, ssize); } pte_iterate_hashed_end(); } + /* + * Just do one more with the last used values. + */ + fixup_tlbie(vpn, psize, psize, ssize); asm volatile("eieio; tlbsync; ptesync":::"memory"); if (lock_tlbie) diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 28c980eb4422..adf469f312f2 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -481,6 +481,7 @@ void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0, "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid)); trace_tlbie(lpid, 0, TLBIEL_INVAL_SET_LPID, lpid, 2, 0, 0); } + /* do we need fixup here ?*/ asm volatile("eieio; tlbsync; ptesync" : : : "memory"); } EXPORT_SYMBOL_GPL(mmu_partition_table_set_entry); diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c index 74354c26d316..a07f5372a4bf 100644 --- a/arch/powerpc/mm/tlb-radix.c +++ b/arch/powerpc/mm/tlb-radix.c @@ -151,6 +151,17 @@ static inline void __tlbie_va(unsigned long va, unsigned long pid, trace_tlbie(0, 0, rb, rs, ric, prs, r); } +static inline void fixup_tlbie(void) +{ + unsigned long pid = 0; + unsigned long va = ((1UL << 52) - 1); + + if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) { + asm volatile("ptesync": : :"memory"); + __tlbie_va(va, pid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB); + } +} + /* * We use 128 set in radix mode and 256 set in hpt mode. */ @@ -200,6 +211,7 @@ static inline void _tlbie_pid(unsigned long pid, unsigned long ric) default: __tlbie_pid(pid, RIC_FLUSH_ALL); } + fixup_tlbie(); asm volatile("eieio; tlbsync; ptesync": : :"memory"); } @@ -253,6 +265,7 @@ static inline void _tlbie_va(unsigned long va, unsigned long pid, asm volatile("ptesync": : :"memory"); __tlbie_va(va, pid, ap, ric); + fixup_tlbie(); asm volatile("eieio; tlbsync; ptesync": : :"memory"); } @@ -264,6 +277,7 @@ static inline void _tlbie_va_range(unsigned long start, unsigned long end, if (also_pwc) __tlbie_pid(pid, RIC_FLUSH_PWC); __tlbie_va_range(start, end, pid, page_size, psize); + fixup_tlbie(); asm volatile("eieio; tlbsync; ptesync": : :"memory"); } @@ -498,6 +512,7 @@ void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start, if (hflush) __tlbie_va_range(hstart, hend, pid, HPAGE_PMD_SIZE, MMU_PAGE_2M); + fixup_tlbie(); asm volatile("eieio; tlbsync; ptesync": : :"memory"); } } -- cgit v1.2.3 From c5d343b6b7badd1f5fe0873eff2e8d63a193e732 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 17 Mar 2018 21:38:10 +0900 Subject: tracing: probeevent: Fix to support minus offset from symbol In Documentation/trace/kprobetrace.txt, it says @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol) However, the parser doesn't parse minus offset correctly, since commit 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned") drops minus ("-") offset support for kprobe probe address usage. This fixes the traceprobe_split_symbol_offset() to parse minus offset again with checking the offset range, and add a minus offset check in kprobe probe address usage. Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox Cc: Ingo Molnar Cc: Tom Zanussi Cc: Arnaldo Carvalho de Melo Cc: Ravi Bangoria Cc: stable@vger.kernel.org Fixes: 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned") Acked-by: Namhyung Kim Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_kprobe.c | 4 ++-- kernel/trace/trace_probe.c | 8 +++----- kernel/trace/trace_probe.h | 2 +- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 1fad24acd444..ae4147eaebd4 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -659,7 +659,7 @@ static int create_trace_kprobe(int argc, char **argv) char *symbol = NULL, *event = NULL, *group = NULL; int maxactive = 0; char *arg; - unsigned long offset = 0; + long offset = 0; void *addr = NULL; char buf[MAX_EVENT_NAME_LEN]; @@ -747,7 +747,7 @@ static int create_trace_kprobe(int argc, char **argv) symbol = argv[1]; /* TODO: support .init module functions */ ret = traceprobe_split_symbol_offset(symbol, &offset); - if (ret) { + if (ret || offset < 0 || offset > UINT_MAX) { pr_info("Failed to parse either an address or a symbol.\n"); return ret; } diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c index d59357308677..daf54bda4dc8 100644 --- a/kernel/trace/trace_probe.c +++ b/kernel/trace/trace_probe.c @@ -320,7 +320,7 @@ static fetch_func_t get_fetch_size_function(const struct fetch_type *type, } /* Split symbol and offset. */ -int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset) +int traceprobe_split_symbol_offset(char *symbol, long *offset) { char *tmp; int ret; @@ -328,13 +328,11 @@ int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset) if (!offset) return -EINVAL; - tmp = strchr(symbol, '+'); + tmp = strpbrk(symbol, "+-"); if (tmp) { - /* skip sign because kstrtoul doesn't accept '+' */ - ret = kstrtoul(tmp + 1, 0, offset); + ret = kstrtol(tmp, 0, offset); if (ret) return ret; - *tmp = '\0'; } else *offset = 0; diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h index e101c5bb9eda..6a4d3fa94042 100644 --- a/kernel/trace/trace_probe.h +++ b/kernel/trace/trace_probe.h @@ -365,7 +365,7 @@ extern int traceprobe_conflict_field_name(const char *name, extern void traceprobe_update_arg(struct probe_arg *arg); extern void traceprobe_free_probe_arg(struct probe_arg *arg); -extern int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset); +extern int traceprobe_split_symbol_offset(char *symbol, long *offset); /* Sum up total data length for dynamic arraies (strings) */ static nokprobe_inline int -- cgit v1.2.3 From 871bef2000968c312a4000b2f56d370dcedbc93c Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 17 Mar 2018 21:38:56 +0900 Subject: selftests: ftrace: Add probe event argument syntax testcase Add a testcase for probe event argument syntax which ensures the kprobe_events interface correctly parses given event arguments. Link: http://lkml.kernel.org/r/152129033679.31874.12705519603869152799.stgit@devbox Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- .../ftrace/test.d/kprobe/kprobe_args_syntax.tc | 97 ++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc new file mode 100644 index 000000000000..231bcd2c4eb5 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc @@ -0,0 +1,97 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Kprobe event argument syntax + +[ -f kprobe_events ] || exit_unsupported # this is configurable + +grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue + +echo 0 > events/enable +echo > kprobe_events + +PROBEFUNC="vfs_read" +GOODREG= +BADREG= +GOODSYM="_sdata" +if ! grep -qw ${GOODSYM} /proc/kallsyms ; then + GOODSYM=$PROBEFUNC +fi +BADSYM="deaqswdefr" +SYMADDR=0x`grep -w ${GOODSYM} /proc/kallsyms | cut -f 1 -d " "` +GOODTYPE="x16" +BADTYPE="y16" + +case `uname -m` in +x86_64|i[3456]86) + GOODREG=%ax + BADREG=%ex +;; +aarch64) + GOODREG=%x0 + BADREG=%ax +;; +arm*) + GOODREG=%r0 + BADREG=%ax +;; +esac + +test_goodarg() # Good-args +{ + while [ "$1" ]; do + echo "p ${PROBEFUNC} $1" > kprobe_events + shift 1 + done; +} + +test_badarg() # Bad-args +{ + while [ "$1" ]; do + ! echo "p ${PROBEFUNC} $1" > kprobe_events + shift 1 + done; +} + +echo > kprobe_events + +: "Register access" +test_goodarg ${GOODREG} +test_badarg ${BADREG} + +: "Symbol access" +test_goodarg "@${GOODSYM}" "@${SYMADDR}" "@${GOODSYM}+10" "@${GOODSYM}-10" +test_badarg "@" "@${BADSYM}" "@${GOODSYM}*10" "@${GOODSYM}/10" \ + "@${GOODSYM}%10" "@${GOODSYM}&10" "@${GOODSYM}|10" + +: "Stack access" +test_goodarg "\$stack" "\$stack0" "\$stack1" +test_badarg "\$stackp" "\$stack0+10" "\$stack1-10" + +: "Retval access" +echo "r ${PROBEFUNC} \$retval" > kprobe_events +! echo "p ${PROBEFUNC} \$retval" > kprobe_events + +: "Comm access" +test_goodarg "\$comm" + +: "Indirect memory access" +test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \ + "+0(\$stack1)" "+10(@${GOODSYM}-10)" "+0(+10(+20(\$stack)))" +test_badarg "+(${GOODREG})" "(${GOODREG}+10)" "-(${GOODREG})" "(${GOODREG})" \ + "+10(\$comm)" "+0(${GOODREG})+10" + +: "Name assignment" +test_goodarg "varname=${GOODREG}" +test_badarg "varname=varname2=${GOODREG}" + +: "Type syntax" +test_goodarg "${GOODREG}:${GOODTYPE}" +test_badarg "${GOODREG}::${GOODTYPE}" "${GOODREG}:${BADTYPE}" \ + "${GOODTYPE}:${GOODREG}" + +: "Combination check" + +test_goodarg "\$comm:string" "+0(\$stack):string" +test_badarg "\$comm:x64" "\$stack:string" "${GOODREG}:string" + +echo > kprobe_events -- cgit v1.2.3 From 5fbdbed797b6d12d043a5121fdbc8d8b49d10e80 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 17 Mar 2018 21:39:44 +0900 Subject: selftests: ftrace: Add a testcase for string type with kprobe_event Add a testcase for string type with kprobe event. This tests good/bad syntax combinations and also the traced data is correct in several way. Link: http://lkml.kernel.org/r/152129038381.31874.9201387794548737554.stgit@devbox Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- .../ftrace/test.d/kprobe/kprobe_args_string.tc | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc new file mode 100644 index 000000000000..5ba73035e1d9 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc @@ -0,0 +1,46 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Kprobe event string type argument + +[ -f kprobe_events ] || exit_unsupported # this is configurable + +echo 0 > events/enable +echo > kprobe_events + +case `uname -m` in +x86_64) + ARG2=%si + OFFS=8 +;; +i[3456]86) + ARG2=%cx + OFFS=4 +;; +aarch64) + ARG2=%x1 + OFFS=8 +;; +arm*) + ARG2=%r1 + OFFS=4 +;; +*) + echo "Please implement other architecture here" + exit_untested +esac + +: "Test get argument (1)" +echo "p:testprobe create_trace_kprobe arg1=+0(+0(${ARG2})):string" > kprobe_events +echo 1 > events/kprobes/testprobe/enable +! echo test >> kprobe_events +tail -n 1 trace | grep -qe "testprobe.* arg1=\"test\"" + +echo 0 > events/kprobes/testprobe/enable +: "Test get argument (2)" +echo "p:testprobe create_trace_kprobe arg1=+0(+0(${ARG2})):string arg2=+0(+${OFFS}(${ARG2})):string" > kprobe_events +echo 1 > events/kprobes/testprobe/enable +! echo test1 test2 >> kprobe_events +tail -n 1 trace | grep -qe "testprobe.* arg1=\"test1\" arg2=\"test2\"" + +echo 0 > events/enable +echo > kprobe_events -- cgit v1.2.3 From dfa453bc90eca0febff33c8d292a656e53702158 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 17 Mar 2018 21:40:31 +0900 Subject: selftests: ftrace: Add a testcase for probepoint Add a testcase for probe point definition. This tests symbol, address and symbol+offset syntax. The offset must be positive and smaller than UINT_MAX. Link: http://lkml.kernel.org/r/152129043097.31874.14273580606301767394.stgit@devbox Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- .../selftests/ftrace/test.d/kprobe/probepoint.tc | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc b/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc new file mode 100644 index 000000000000..4fda01a08da4 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc @@ -0,0 +1,43 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Kprobe events - probe points + +[ -f kprobe_events ] || exit_unsupported # this is configurable + +TARGET_FUNC=create_trace_kprobe + +dec_addr() { # hexaddr + printf "%d" "0x"`echo $1 | tail -c 8` +} + +set_offs() { # prev target next + A1=`dec_addr $1` + A2=`dec_addr $2` + A3=`dec_addr $3` + TARGET="0x$2" # an address + PREV=`expr $A1 - $A2` # offset to previous symbol + NEXT=+`expr $A3 - $A2` # offset to next symbol + OVERFLOW=+`printf "0x%x" ${PREV}` # overflow offset to previous symbol +} + +# We have to decode symbol addresses to get correct offsets. +# If the offset is not an instruction boundary, it cause -EILSEQ. +set_offs `grep -A1 -B1 ${TARGET_FUNC} /proc/kallsyms | cut -f 1 -d " " | xargs` + +UINT_TEST=no +# printf "%x" -1 returns (unsigned long)-1. +if [ `printf "%x" -1 | wc -c` != 9 ]; then + UINT_TEST=yes +fi + +echo 0 > events/enable +echo > kprobe_events +echo "p:testprobe ${TARGET_FUNC}" > kprobe_events +echo "p:testprobe ${TARGET}" > kprobe_events +echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events +! echo "p:testprobe ${TARGET_FUNC}${PREV}" > kprobe_events +if [ "${UINT_TEST}" = yes ]; then +! echo "p:testprobe ${TARGET_FUNC}${OVERFLOW}" > kprobe_events +fi +echo > kprobe_events +clear_trace -- cgit v1.2.3 From f6cc9c054e77b9a28d4594bcc201697edb21dfd2 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Thu, 22 Mar 2018 19:53:33 +0200 Subject: ip_tunnel: Emit events for post-register MTU changes For tunnels created with IFLA_MTU, MTU of the netdevice is set by rtnl_create_link() (called from rtnl_newlink()) before the device is registered. However without IFLA_MTU that's not done. rtnl_newlink() proceeds by calling struct rtnl_link_ops.newlink, which via ip_tunnel_newlink() calls register_netdevice(), and that emits NETDEV_REGISTER. Thus any listeners that inspect the netdevice get the MTU of 0. After ip_tunnel_newlink() corrects the MTU after registering the netdevice, but since there's no event, the listeners don't get to know about the MTU until something else happens--such as a NETDEV_UP event. That's not ideal. So instead of setting the MTU directly, go through dev_set_mtu(), which takes care of distributing the necessary NETDEV_PRECHANGEMTU and NETDEV_CHANGEMTU events. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index 6d21068f9b55..7b85ffad5d74 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -362,13 +362,18 @@ static struct ip_tunnel *ip_tunnel_create(struct net *net, struct ip_tunnel *nt; struct net_device *dev; int t_hlen; + int mtu; + int err; BUG_ON(!itn->fb_tunnel_dev); dev = __ip_tunnel_create(net, itn->fb_tunnel_dev->rtnl_link_ops, parms); if (IS_ERR(dev)) return ERR_CAST(dev); - dev->mtu = ip_tunnel_bind_dev(dev); + mtu = ip_tunnel_bind_dev(dev); + err = dev_set_mtu(dev, mtu); + if (err) + goto err_dev_set_mtu; nt = netdev_priv(dev); t_hlen = nt->hlen + sizeof(struct iphdr); @@ -376,6 +381,10 @@ static struct ip_tunnel *ip_tunnel_create(struct net *net, dev->max_mtu = 0xFFF8 - dev->hard_header_len - t_hlen; ip_tunnel_add(itn, nt); return nt; + +err_dev_set_mtu: + unregister_netdevice(dev); + return ERR_PTR(err); } int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb, @@ -1102,17 +1111,24 @@ int ip_tunnel_newlink(struct net_device *dev, struct nlattr *tb[], nt->fwmark = fwmark; err = register_netdevice(dev); if (err) - goto out; + goto err_register_netdevice; if (dev->type == ARPHRD_ETHER && !tb[IFLA_ADDRESS]) eth_hw_addr_random(dev); mtu = ip_tunnel_bind_dev(dev); - if (!tb[IFLA_MTU]) - dev->mtu = mtu; + if (!tb[IFLA_MTU]) { + err = dev_set_mtu(dev, mtu); + if (err) + goto err_dev_set_mtu; + } ip_tunnel_add(itn, nt); -out: + return 0; + +err_dev_set_mtu: + unregister_netdevice(dev); +err_register_netdevice: return err; } EXPORT_SYMBOL_GPL(ip_tunnel_newlink); -- cgit v1.2.3 From 22b99058dd79ecff9de64eb30e15a330d89862c6 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Thu, 22 Mar 2018 19:53:34 +0200 Subject: mlxsw: spectrum_router: Move mlxsw_sp_rif_ipip_lb_op() Move the function so that it can be called without forward declaration from a function that will be added in a follow-up patch. Fixes: 0063587d3587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 54 +++++++++++----------- 1 file changed, 27 insertions(+), 27 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index f7948e983637..a7d0adf068ec 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1380,6 +1380,33 @@ mlxsw_sp_ipip_entry_ol_up_event(struct mlxsw_sp *mlxsw_sp, decap_fib_entry); } +static int +mlxsw_sp_rif_ipip_lb_op(struct mlxsw_sp_rif_ipip_lb *lb_rif, + struct mlxsw_sp_vr *ul_vr, bool enable) +{ + struct mlxsw_sp_rif_ipip_lb_config lb_cf = lb_rif->lb_config; + struct mlxsw_sp_rif *rif = &lb_rif->common; + struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp; + char ritr_pl[MLXSW_REG_RITR_LEN]; + u32 saddr4; + + switch (lb_cf.ul_protocol) { + case MLXSW_SP_L3_PROTO_IPV4: + saddr4 = be32_to_cpu(lb_cf.saddr.addr4); + mlxsw_reg_ritr_pack(ritr_pl, enable, MLXSW_REG_RITR_LOOPBACK_IF, + rif->rif_index, rif->vr_id, rif->dev->mtu); + mlxsw_reg_ritr_loopback_ipip4_pack(ritr_pl, lb_cf.lb_ipipt, + MLXSW_REG_RITR_LOOPBACK_IPIP_OPTIONS_GRE_KEY_PRESET, + ul_vr->id, saddr4, lb_cf.okey); + break; + + case MLXSW_SP_L3_PROTO_IPV6: + return -EAFNOSUPPORT; + } + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl); +} + static void mlxsw_sp_netdevice_ipip_ol_up_event(struct mlxsw_sp *mlxsw_sp, struct net_device *ol_dev) { @@ -6843,33 +6870,6 @@ mlxsw_sp_rif_ipip_lb_setup(struct mlxsw_sp_rif *rif, rif_lb->lb_config = params_lb->lb_config; } -static int -mlxsw_sp_rif_ipip_lb_op(struct mlxsw_sp_rif_ipip_lb *lb_rif, - struct mlxsw_sp_vr *ul_vr, bool enable) -{ - struct mlxsw_sp_rif_ipip_lb_config lb_cf = lb_rif->lb_config; - struct mlxsw_sp_rif *rif = &lb_rif->common; - struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp; - char ritr_pl[MLXSW_REG_RITR_LEN]; - u32 saddr4; - - switch (lb_cf.ul_protocol) { - case MLXSW_SP_L3_PROTO_IPV4: - saddr4 = be32_to_cpu(lb_cf.saddr.addr4); - mlxsw_reg_ritr_pack(ritr_pl, enable, MLXSW_REG_RITR_LOOPBACK_IF, - rif->rif_index, rif->vr_id, rif->dev->mtu); - mlxsw_reg_ritr_loopback_ipip4_pack(ritr_pl, lb_cf.lb_ipipt, - MLXSW_REG_RITR_LOOPBACK_IPIP_OPTIONS_GRE_KEY_PRESET, - ul_vr->id, saddr4, lb_cf.okey); - break; - - case MLXSW_SP_L3_PROTO_IPV6: - return -EAFNOSUPPORT; - } - - return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl); -} - static int mlxsw_sp_rif_ipip_lb_configure(struct mlxsw_sp_rif *rif) { -- cgit v1.2.3 From 68c3cd925597842c4744fd93d61f8cd2496cdfc8 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Thu, 22 Mar 2018 19:53:35 +0200 Subject: mlxsw: spectrum_router: Handle MTU change of GRE netdevs Update MTU of overlay loopback in accordance with the setting on the tunnel netdevice. Fixes: 0063587d3587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index a7d0adf068ec..997e24dcb053 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1407,6 +1407,28 @@ mlxsw_sp_rif_ipip_lb_op(struct mlxsw_sp_rif_ipip_lb *lb_rif, return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl); } +static int mlxsw_sp_netdevice_ipip_ol_update_mtu(struct mlxsw_sp *mlxsw_sp, + struct net_device *ol_dev) +{ + struct mlxsw_sp_ipip_entry *ipip_entry; + struct mlxsw_sp_rif_ipip_lb *lb_rif; + struct mlxsw_sp_vr *ul_vr; + int err = 0; + + ipip_entry = mlxsw_sp_ipip_entry_find_by_ol_dev(mlxsw_sp, ol_dev); + if (ipip_entry) { + lb_rif = ipip_entry->ol_lb; + ul_vr = &mlxsw_sp->router->vrs[lb_rif->ul_vr_id]; + err = mlxsw_sp_rif_ipip_lb_op(lb_rif, ul_vr, true); + if (err) + goto out; + lb_rif->common.mtu = ol_dev->mtu; + } + +out: + return err; +} + static void mlxsw_sp_netdevice_ipip_ol_up_event(struct mlxsw_sp *mlxsw_sp, struct net_device *ol_dev) { @@ -1687,6 +1709,8 @@ int mlxsw_sp_netdevice_ipip_ol_event(struct mlxsw_sp *mlxsw_sp, extack = info->extack; return mlxsw_sp_netdevice_ipip_ol_change_event(mlxsw_sp, ol_dev, extack); + case NETDEV_CHANGEMTU: + return mlxsw_sp_netdevice_ipip_ol_update_mtu(mlxsw_sp, ol_dev); } return 0; } -- cgit v1.2.3 From 9d1887ef3252a45f4e692525d04e23ce8091c17c Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 5 Mar 2018 09:33:27 -0800 Subject: KVM: nVMX: sync vmcs02 segment regs prior to vmx_set_cr0 Segment registers must be synchronized prior to any code that may trigger a call to emulation_required()/guest_state_valid(), e.g. vmx_set_cr0(). Because preparing vmcs02 writes segmentation fields directly, i.e. doesn't use vmx_set_segment(), emulation_required will not be re-evaluated when synchronizing the segment registers, which can result in L0 incorrectly starting emulation of L2. Fixes: 8665c3f97320 ("KVM: nVMX: initialize descriptor cache fields in prepare_vmcs02_full") Signed-off-by: Sean Christopherson [Move all of prepare_vmcs02_full earlier, not just segment registers. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 051dab74e4e9..f0fd50ba284c 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -10704,6 +10704,11 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, struct vcpu_vmx *vmx = to_vmx(vcpu); u32 exec_control, vmcs12_exec_ctrl; + if (vmx->nested.dirty_vmcs12) { + prepare_vmcs02_full(vcpu, vmcs12, from_vmentry); + vmx->nested.dirty_vmcs12 = false; + } + /* * First, the fields that are shadowed. This must be kept in sync * with vmx_shadow_fields.h. @@ -10941,11 +10946,6 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, /* Note: modifies VM_ENTRY/EXIT_CONTROLS and GUEST/HOST_IA32_EFER */ vmx_set_efer(vcpu, vcpu->arch.efer); - if (vmx->nested.dirty_vmcs12) { - prepare_vmcs02_full(vcpu, vmcs12, from_vmentry); - vmx->nested.dirty_vmcs12 = false; - } - /* Shadow page tables on either EPT or shadow page tables. */ if (nested_vmx_load_cr3(vcpu, vmcs12->guest_cr3, nested_cpu_has_ept(vmcs12), entry_failure_code)) -- cgit v1.2.3 From 1bfa26ff8c4b7512f4e4efa6df211239223033d4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 23 Mar 2018 07:56:58 -0700 Subject: ipv6: fix possible deadlock in rt6_age_examine_exception() syzbot reported a LOCKDEP splat [1] in rt6_age_examine_exception() rt6_age_examine_exception() is called while rt6_exception_lock is held. This lock is the lower one in the lock hierarchy, thus we can not call dst_neigh_lookup() function, as it can fallback to neigh_create() We should instead do a pure RCU lookup. As a bonus we avoid a pair of atomic operations on neigh refcount. [1] WARNING: possible circular locking dependency detected 4.16.0-rc4+ #277 Not tainted syz-executor7/4015 is trying to acquire lock: (&ndev->lock){++--}, at: [<00000000416dce19>] __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928 but task is already holding lock: (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&tbl->lock){++-.}: __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312 __neigh_create+0x87e/0x1d90 net/core/neighbour.c:528 neigh_create include/net/neighbour.h:315 [inline] ip6_neigh_lookup+0x9a7/0xba0 net/ipv6/route.c:228 dst_neigh_lookup include/net/dst.h:405 [inline] rt6_age_examine_exception net/ipv6/route.c:1609 [inline] rt6_age_exceptions+0x381/0x660 net/ipv6/route.c:1645 fib6_age+0xfb/0x140 net/ipv6/ip6_fib.c:2033 fib6_clean_node+0x389/0x580 net/ipv6/ip6_fib.c:1919 fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1845 fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1893 fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1970 __fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1986 fib6_clean_all net/ipv6/ip6_fib.c:1997 [inline] fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2053 ndisc_netdev_event+0x3c2/0x4a0 net/ipv6/ndisc.c:1781 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x262/0x430 net/core/dev.c:6960 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080 inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919 sock_do_ioctl+0xef/0x390 net/socket.c:957 sock_ioctl+0x36b/0x610 net/socket.c:1081 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686 SYSC_ioctl fs/ioctl.c:701 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> #2 (rt6_exception_lock){+.-.}: __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:315 [inline] rt6_flush_exceptions+0x21/0x210 net/ipv6/route.c:1367 fib6_del_route net/ipv6/ip6_fib.c:1677 [inline] fib6_del+0x624/0x12c0 net/ipv6/ip6_fib.c:1761 __ip6_del_rt+0xc7/0x120 net/ipv6/route.c:2980 ip6_del_rt+0x132/0x1a0 net/ipv6/route.c:2993 __ipv6_dev_ac_dec+0x3b1/0x600 net/ipv6/anycast.c:332 ipv6_dev_ac_dec net/ipv6/anycast.c:345 [inline] ipv6_sock_ac_close+0x2b4/0x3e0 net/ipv6/anycast.c:200 inet6_release+0x48/0x70 net/ipv6/af_inet6.c:433 sock_release+0x8d/0x1e0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x327/0x7e0 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ad0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 get_signal+0x73a/0x16d0 kernel/signal.c:2469 do_signal+0x90/0x1e90 arch/x86/kernel/signal.c:809 exit_to_usermode_loop+0x258/0x2f0 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ec/0x940 arch/x86/entry/common.c:292 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> #1 (&(&tb->tb6_lock)->rlock){+.-.}: __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:315 [inline] __ip6_ins_rt+0x56/0x90 net/ipv6/route.c:1007 ip6_route_add+0x141/0x190 net/ipv6/route.c:2955 addrconf_prefix_route+0x44f/0x620 net/ipv6/addrconf.c:2359 fixup_permanent_addr net/ipv6/addrconf.c:3368 [inline] addrconf_permanent_addr net/ipv6/addrconf.c:3391 [inline] addrconf_notify+0x1ad2/0x2310 net/ipv6/addrconf.c:3460 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6958 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 do_setlink+0xa22/0x3bb0 net/core/rtnetlink.c:2357 rtnl_newlink+0xf37/0x1a50 net/core/rtnetlink.c:2965 rtnetlink_rcv_msg+0x57f/0xb10 net/core/rtnetlink.c:4641 netlink_rcv_skb+0x14b/0x380 net/netlink/af_netlink.c:2444 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4659 netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline] netlink_unicast+0x4c4/0x6b0 net/netlink/af_netlink.c:1334 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047 __sys_sendmsg+0xe5/0x210 net/socket.c:2081 SYSC_sendmsg net/socket.c:2092 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2088 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> #0 (&ndev->lock){++--}: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312 __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928 ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961 pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392 pneigh_ifdown net/core/neighbour.c:695 [inline] neigh_ifdown+0x149/0x250 net/core/neighbour.c:294 rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874 addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633 addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x262/0x430 net/core/dev.c:6960 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080 inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919 packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066 sock_do_ioctl+0xef/0x390 net/socket.c:957 sock_ioctl+0x36b/0x610 net/socket.c:1081 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686 SYSC_ioctl fs/ioctl.c:701 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 other info that might help us debug this: Chain exists of: &ndev->lock --> rt6_exception_lock --> &tbl->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&tbl->lock); lock(rt6_exception_lock); lock(&tbl->lock); lock(&ndev->lock); *** DEADLOCK *** 2 locks held by syz-executor7/4015: #0: (rtnl_mutex){+.+.}, at: [<00000000a2f16daa>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292 stack backtrace: CPU: 0 PID: 4015 Comm: syz-executor7 Not tainted 4.16.0-rc4+ #277 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_circular_bug.isra.38+0x2cd/0x2dc kernel/locking/lockdep.c:1223 check_prev_add kernel/locking/lockdep.c:1863 [inline] check_prevs_add kernel/locking/lockdep.c:1976 [inline] validate_chain kernel/locking/lockdep.c:2417 [inline] __lock_acquire+0x30a8/0x3e00 kernel/locking/lockdep.c:3431 lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312 __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928 ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961 pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392 pneigh_ifdown net/core/neighbour.c:695 [inline] neigh_ifdown+0x149/0x250 net/core/neighbour.c:294 rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874 addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633 addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x262/0x430 net/core/dev.c:6960 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080 inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919 packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066 sock_do_ioctl+0xef/0x390 net/socket.c:957 sock_ioctl+0x36b/0x610 net/socket.c:1081 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686 SYSC_ioctl fs/ioctl.c:701 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: c757faa8bfa2 ("ipv6: prepare fib6_age() for exception table") Signed-off-by: Eric Dumazet Cc: Wei Wang Cc: Martin KaFai Lau Acked-by: Wei Wang Signed-off-by: David S. Miller --- net/ipv6/route.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index b0d5c64e1978..b33d057ac5eb 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1626,11 +1626,10 @@ static void rt6_age_examine_exception(struct rt6_exception_bucket *bucket, struct neighbour *neigh; __u8 neigh_flags = 0; - neigh = dst_neigh_lookup(&rt->dst, &rt->rt6i_gateway); - if (neigh) { + neigh = __ipv6_neigh_lookup_noref(rt->dst.dev, &rt->rt6i_gateway); + if (neigh) neigh_flags = neigh->flags; - neigh_release(neigh); - } + if (!(neigh_flags & NTF_ROUTER)) { RT6_TRACE("purging route %p via non-router but gateway\n", rt); @@ -1654,7 +1653,8 @@ void rt6_age_exceptions(struct rt6_info *rt, if (!rcu_access_pointer(rt->rt6i_exception_bucket)) return; - spin_lock_bh(&rt6_exception_lock); + rcu_read_lock_bh(); + spin_lock(&rt6_exception_lock); bucket = rcu_dereference_protected(rt->rt6i_exception_bucket, lockdep_is_held(&rt6_exception_lock)); @@ -1668,7 +1668,8 @@ void rt6_age_exceptions(struct rt6_info *rt, bucket++; } } - spin_unlock_bh(&rt6_exception_lock); + spin_unlock(&rt6_exception_lock); + rcu_read_unlock_bh(); } struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table, -- cgit v1.2.3 From 06ace26f4e6fcf747e890a39193be811777a048a Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Thu, 22 Mar 2018 15:18:53 -0400 Subject: x86/efi: Free efi_pgd with free_pages() The efi_pgd is allocated as PGD_ALLOCATION_ORDER pages and therefore must also be freed as PGD_ALLOCATION_ORDER pages with free_pages(). Fixes: d9e9a6418065 ("x86/mm/pti: Allocate a separate user PGD") Signed-off-by: Waiman Long Signed-off-by: Thomas Gleixner Cc: linux-efi@vger.kernel.org Cc: Dave Hansen Cc: Ard Biesheuvel Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1521746333-19593-1-git-send-email-longman@redhat.com --- arch/x86/platform/efi/efi_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index c310a8284358..f9cfbc0d1f33 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -227,7 +227,7 @@ int __init efi_alloc_page_tables(void) if (!pud) { if (CONFIG_PGTABLE_LEVELS > 4) free_page((unsigned long) pgd_page_vaddr(*pgd)); - free_page((unsigned long)efi_pgd); + free_pages((unsigned long)efi_pgd, PGD_ALLOCATION_ORDER); return -ENOMEM; } -- cgit v1.2.3 From c70a36268799cf2f902b5a31e452571fcb96bfe9 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Fri, 23 Mar 2018 15:30:33 -0400 Subject: drm/amdkfd: Fix scratch memory with HWS enabled Program sh_hidden_private_base_vmid correctly in the map-process PM4 packet. Signed-off-by: Felix Kuehling Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c index 0ecbd1f9b606..0c3bc00978f7 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c @@ -188,8 +188,7 @@ static int pm_create_map_process(struct packet_manager *pm, uint32_t *buffer, packet->sh_mem_ape1_base = qpd->sh_mem_ape1_base; packet->sh_mem_ape1_limit = qpd->sh_mem_ape1_limit; - /* TODO: scratch support */ - packet->sh_hidden_private_base_vmid = 0; + packet->sh_hidden_private_base_vmid = qpd->sh_hidden_private_base; packet->gds_addr_lo = lower_32_bits(qpd->gds_context_area); packet->gds_addr_hi = upper_32_bits(qpd->gds_context_area); -- cgit v1.2.3 From 72a01d231dcb22a276209c7a924a8cd475fbaa9b Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Fri, 23 Mar 2018 15:30:34 -0400 Subject: drm/amdkfd: Deallocate SDMA queues correctly Deallocate SDMA queues during abnormal process termination and when queue creation fails after the SDMA allocation. Signed-off-by: Felix Kuehling Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index b21285afa4ea..1bd5f26b3f00 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -821,13 +821,13 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, pr_warn("Can't create new usermode queue because %d queues were already created\n", dqm->total_queue_count); retval = -EPERM; - goto out; + goto out_unlock; } if (q->properties.type == KFD_QUEUE_TYPE_SDMA) { retval = allocate_sdma_queue(dqm, &q->sdma_id); if (retval) - goto out; + goto out_unlock; q->properties.sdma_queue_id = q->sdma_id / CIK_SDMA_QUEUES_PER_ENGINE; q->properties.sdma_engine_id = @@ -838,7 +838,7 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, if (!mqd) { retval = -ENOMEM; - goto out; + goto out_deallocate_sdma_queue; } dqm->asic_ops.init_sdma_vm(dqm, q, qpd); @@ -848,7 +848,7 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj, &q->gart_mqd_addr, &q->properties); if (retval) - goto out; + goto out_deallocate_sdma_queue; list_add(&q->list, &qpd->queues_list); qpd->queue_count++; @@ -869,7 +869,13 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, pr_debug("Total of %d queues are accountable so far\n", dqm->total_queue_count); -out: + mutex_unlock(&dqm->lock); + return retval; + +out_deallocate_sdma_queue: + if (q->properties.type == KFD_QUEUE_TYPE_SDMA) + deallocate_sdma_queue(dqm, q->sdma_id); +out_unlock: mutex_unlock(&dqm->lock); return retval; } @@ -1188,8 +1194,10 @@ static int process_termination_cpsch(struct device_queue_manager *dqm, /* Clear all user mode queues */ list_for_each_entry(q, &qpd->queues_list, list) { - if (q->properties.type == KFD_QUEUE_TYPE_SDMA) + if (q->properties.type == KFD_QUEUE_TYPE_SDMA) { dqm->sdma_queue_count--; + deallocate_sdma_queue(dqm, q->sdma_id); + } if (q->properties.is_active) dqm->queue_count--; -- cgit v1.2.3 From d8ba61ba58c88d5207c1ba2f7d9a2280e7d03be9 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Thu, 23 Jul 2015 15:37:48 -0700 Subject: x86/entry/64: Don't use IST entry for #BP stack There's nothing IST-worthy about #BP/int3. We don't allow kprobes in the small handful of places in the kernel that run at CPL0 with an invalid stack, and 32-bit kernels have used normal interrupt gates for #BP forever. Furthermore, we don't allow kprobes in places that have usergs while in kernel mode, so "paranoid" is also unnecessary. Signed-off-by: Andy Lutomirski Signed-off-by: Linus Torvalds Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org --- arch/x86/entry/entry_64.S | 2 +- arch/x86/kernel/idt.c | 2 -- arch/x86/kernel/traps.c | 15 ++++++++------- 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index d5c7f18f79ac..9b114675fbc0 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -1138,7 +1138,7 @@ apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \ #endif /* CONFIG_HYPERV */ idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK -idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK +idtentry int3 do_int3 has_error_code=0 idtentry stack_segment do_stack_segment has_error_code=1 #ifdef CONFIG_XEN diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c index 56d99be3706a..50bee5fe1140 100644 --- a/arch/x86/kernel/idt.c +++ b/arch/x86/kernel/idt.c @@ -160,7 +160,6 @@ static const __initconst struct idt_data early_pf_idts[] = { */ static const __initconst struct idt_data dbg_idts[] = { INTG(X86_TRAP_DB, debug), - INTG(X86_TRAP_BP, int3), }; #endif @@ -183,7 +182,6 @@ gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss; static const __initconst struct idt_data ist_idts[] = { ISTG(X86_TRAP_DB, debug, DEBUG_STACK), ISTG(X86_TRAP_NMI, nmi, NMI_STACK), - SISTG(X86_TRAP_BP, int3, DEBUG_STACK), ISTG(X86_TRAP_DF, double_fault, DOUBLEFAULT_STACK), #ifdef CONFIG_X86_MCE ISTG(X86_TRAP_MC, &machine_check, MCE_STACK), diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 3d9b2308e7fa..03f3d7695dac 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -577,7 +577,6 @@ do_general_protection(struct pt_regs *regs, long error_code) } NOKPROBE_SYMBOL(do_general_protection); -/* May run on IST stack. */ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code) { #ifdef CONFIG_DYNAMIC_FTRACE @@ -592,6 +591,13 @@ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code) if (poke_int3_handler(regs)) return; + /* + * Use ist_enter despite the fact that we don't use an IST stack. + * We can be called from a kprobe in non-CONTEXT_KERNEL kernel + * mode or even during context tracking state changes. + * + * This means that we can't schedule. That's okay. + */ ist_enter(regs); RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU"); #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP @@ -609,15 +615,10 @@ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code) SIGTRAP) == NOTIFY_STOP) goto exit; - /* - * Let others (NMI) know that the debug stack is in use - * as we may switch to the interrupt stack. - */ - debug_stack_usage_inc(); cond_local_irq_enable(regs); do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, NULL); cond_local_irq_disable(regs); - debug_stack_usage_dec(); + exit: ist_exit(regs); } -- cgit v1.2.3 From b00214865d65100163574ba250008f182cf90869 Mon Sep 17 00:00:00 2001 From: Nobutaka Okabe Date: Fri, 23 Mar 2018 19:49:44 +0900 Subject: ALSA: usb-audio: Add native DSD support for TEAC UD-301 Add native DSD support quirk for TEAC UD-301 DAC, by adding the PID/VID 0644:804a. Signed-off-by: Nobutaka Okabe Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index ea8f3de92fa4..794224e1d6df 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1171,6 +1171,7 @@ static bool is_teac_dsd_dac(unsigned int id) switch (id) { case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-503/NT-503 */ case USB_ID(0x0644, 0x8044): /* Esoteric D-05X */ + case USB_ID(0x0644, 0x804a): /* TEAC UD-301 */ return true; } return false; -- cgit v1.2.3 From f8fb3419ead44f9a3136995acd24e35da4525177 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 20 Mar 2018 03:13:27 +0100 Subject: batman-adv: fix multicast-via-unicast transmission with AP isolation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For multicast frames AP isolation is only supposed to be checked on the receiving nodes and never on the originating one. Furthermore, the isolation or wifi flag bits should only be intepreted as such for unicast and never multicast TT entries. By injecting flags to the multicast TT entry claimed by a single target node it was verified in tests that this multicast address becomes unreachable, leading to packet loss. Omitting the "src" parameter to the batadv_transtable_search() call successfully skipped the AP isolation check and made the target reachable again. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/multicast.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/multicast.c b/net/batman-adv/multicast.c index d70640135e3a..ee56af5c43e0 100644 --- a/net/batman-adv/multicast.c +++ b/net/batman-adv/multicast.c @@ -814,8 +814,8 @@ static struct batadv_orig_node * batadv_mcast_forw_tt_node_get(struct batadv_priv *bat_priv, struct ethhdr *ethhdr) { - return batadv_transtable_search(bat_priv, ethhdr->h_source, - ethhdr->h_dest, BATADV_NO_FLAGS); + return batadv_transtable_search(bat_priv, NULL, ethhdr->h_dest, + BATADV_NO_FLAGS); } /** -- cgit v1.2.3 From a752c0a4524889cdc0765925258fd1fd72344100 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Thu, 22 Mar 2018 00:21:32 +0100 Subject: batman-adv: fix packet loss for broadcasted DHCP packets to a server MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DHCP connectivity issues can currently occur if the following conditions are met: 1) A DHCP packet from a client to a server 2) This packet has a multicast destination 3) This destination has a matching entry in the translation table (FF:FF:FF:FF:FF:FF for IPv4, 33:33:00:01:00:02/33:33:00:01:00:03 for IPv6) 4) The orig-node determined by TT for the multicast destination does not match the orig-node determined by best-gateway-selection In this case the DHCP packet will be dropped. The "gateway-out-of-range" check is supposed to only be applied to unicasted DHCP packets to a specific DHCP server. In that case dropping the the unicasted frame forces the client to retry via a broadcasted one, but now directed to the new best gateway. A DHCP packet with broadcast/multicast destination is already ensured to always be delivered to the best gateway. Dropping a multicasted DHCP packet here will only prevent completing DHCP as there is no other fallback. So far, it seems the unicast check was implicitly performed by expecting the batadv_transtable_search() to return NULL for multicast destinations. However, a multicast address could have always ended up in the translation table and in fact is now common. To fix this potential loss of a DHCP client-to-server packet to a multicast address this patch adds an explicit multicast destination check to reliably bail out of the gateway-out-of-range check for such destinations. The issue and fix were tested in the following three node setup: - Line topology, A-B-C - A: gateway client, DHCP client - B: gateway server, hop-penalty increased: 30->60, DHCP server - C: gateway server, code modifications to announce FF:FF:FF:FF:FF:FF Without this patch, A would never transmit its DHCP Discover packet due to an always "out-of-range" condition. With this patch, a full DHCP handshake between A and B was possible again. Fixes: be7af5cf9cae ("batman-adv: refactoring gateway handling code") Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/gateway_client.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index 37fe9a644f22..808d2dd4a839 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -746,7 +746,7 @@ bool batadv_gw_out_of_range(struct batadv_priv *bat_priv, { struct batadv_neigh_node *neigh_curr = NULL; struct batadv_neigh_node *neigh_old = NULL; - struct batadv_orig_node *orig_dst_node; + struct batadv_orig_node *orig_dst_node = NULL; struct batadv_gw_node *gw_node = NULL; struct batadv_gw_node *curr_gw = NULL; struct batadv_neigh_ifinfo *curr_ifinfo, *old_ifinfo; @@ -757,6 +757,9 @@ bool batadv_gw_out_of_range(struct batadv_priv *bat_priv, vid = batadv_get_vid(skb, 0); + if (is_multicast_ether_addr(ethhdr->h_dest)) + goto out; + orig_dst_node = batadv_transtable_search(bat_priv, ethhdr->h_source, ethhdr->h_dest, vid); if (!orig_dst_node) -- cgit v1.2.3 From 771b7bf05339081019d22452ebcab6929372e13e Mon Sep 17 00:00:00 2001 From: Pierre-Yves MORDRET Date: Wed, 21 Mar 2018 17:48:40 +0100 Subject: i2c: i2c-stm32f7: fix no check on returned setup Before assigning returned setup structure check if not null Fixes: 463a9215f3ca7600b5ff ("i2c: stm32f7: fix setup structure") Signed-off-by: Pierre-Yves MORDRET Acked-by: Alexandre TORGUE Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-stm32f7.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index b445b3bb0bb1..f273e28c39db 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -888,6 +888,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) } setup = of_device_get_match_data(&pdev->dev); + if (!setup) { + dev_err(&pdev->dev, "Can't get device data\n"); + ret = -ENODEV; + goto clk_free; + } i2c_dev->setup = *setup; ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns", -- cgit v1.2.3 From 1328f02005bbbaed15b9d5b7f3ab5ec9d4d5268a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 22 Jan 2018 12:20:26 +0100 Subject: ARM: 8746/1: vfp: Go back to clearing vfp_current_hw_state[] Commit 384b38b66947 ("ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu") fixed the cpu dying notifier by clearing vfp_current_hw_state[]. However commit e5b61bafe704 ("arm: Convert VFP hotplug notifiers to state machine") incorrectly used the original vfp_force_reload() function in the cpu dying notifier. Fix it by going back to clearing vfp_current_hw_state[]. Fixes: e5b61bafe704 ("arm: Convert VFP hotplug notifiers to state machine") Cc: linux-stable Reported-by: Kohji Okuno Signed-off-by: Fabio Estevam Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 03c6a3c72f9c..4c375e11ae95 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -648,7 +648,7 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, */ static int vfp_dying_cpu(unsigned int cpu) { - vfp_force_reload(cpu, current_thread_info()); + vfp_current_hw_state[cpu] = NULL; return 0; } -- cgit v1.2.3 From ad43fc9aa24e9fc9ad780faad62fd78a09da839c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Feb 2018 14:56:07 +0100 Subject: ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMU Without CONFIG_MMU, this results in a build failure: ./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant #define VECTORS_BASE vectors_base arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE' { VECTORS_BASE, "Vectors" }, arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'? .mask = L_PTE_USER, ^~~~~~~~~~ Obviously the feature only makes sense with an MMU, so let's add the dependency here. Fixes: a8e53c151fe7 ("ARM: 8737/1: mm: dump: add checking for writable and executable") Acked-by: Laura Abbott Signed-off-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 78a647080ebc..199ebc1c4538 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -22,6 +22,7 @@ config ARM_PTDUMP_DEBUGFS config DEBUG_WX bool "Warn on W+X mappings at boot" + depends on MMU select ARM_PTDUMP_CORE ---help--- Generate a warning if any W+X mappings are found at boot. -- cgit v1.2.3 From 73b9160d0dfe44dfdaffd6465dc1224c38a4a73c Mon Sep 17 00:00:00 2001 From: Jinbum Park Date: Tue, 6 Mar 2018 01:37:21 +0100 Subject: ARM: 8748/1: mm: Define vdso_start, vdso_end as array Define vdso_start, vdso_end as array to avoid compile-time analysis error for the case of built with CONFIG_FORTIFY_SOURCE. and, since vdso_start, vdso_end are used in vdso.c only, move extern-declaration from vdso.h to vdso.c. If kernel is built with CONFIG_FORTIFY_SOURCE, compile-time error happens at this code. - if (memcmp(&vdso_start, "177ELF", 4)) The size of "&vdso_start" is recognized as 1 byte, but n is 4, So that compile-time error is reported. Acked-by: Kees Cook Signed-off-by: Jinbum Park Signed-off-by: Russell King --- arch/arm/include/asm/vdso.h | 2 -- arch/arm/kernel/vdso.c | 12 +++++++----- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h index 9c99e817535e..5b85889f82ee 100644 --- a/arch/arm/include/asm/vdso.h +++ b/arch/arm/include/asm/vdso.h @@ -12,8 +12,6 @@ struct mm_struct; void arm_install_vdso(struct mm_struct *mm, unsigned long addr); -extern char vdso_start, vdso_end; - extern unsigned int vdso_total_pages; #else /* CONFIG_VDSO */ diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index a4d6dc0f2427..f4dd7f9663c1 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -39,6 +39,8 @@ static struct page **vdso_text_pagelist; +extern char vdso_start[], vdso_end[]; + /* Total number of pages needed for the data and text portions of the VDSO. */ unsigned int vdso_total_pages __ro_after_init; @@ -197,13 +199,13 @@ static int __init vdso_init(void) unsigned int text_pages; int i; - if (memcmp(&vdso_start, "\177ELF", 4)) { + if (memcmp(vdso_start, "\177ELF", 4)) { pr_err("VDSO is not a valid ELF object!\n"); return -ENOEXEC; } - text_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT; - pr_debug("vdso: %i text pages at base %p\n", text_pages, &vdso_start); + text_pages = (vdso_end - vdso_start) >> PAGE_SHIFT; + pr_debug("vdso: %i text pages at base %p\n", text_pages, vdso_start); /* Allocate the VDSO text pagelist */ vdso_text_pagelist = kcalloc(text_pages, sizeof(struct page *), @@ -218,7 +220,7 @@ static int __init vdso_init(void) for (i = 0; i < text_pages; i++) { struct page *page; - page = virt_to_page(&vdso_start + i * PAGE_SIZE); + page = virt_to_page(vdso_start + i * PAGE_SIZE); vdso_text_pagelist[i] = page; } @@ -229,7 +231,7 @@ static int __init vdso_init(void) cntvct_ok = cntvct_functional(); - patch_vdso(&vdso_start); + patch_vdso(vdso_start); return 0; } -- cgit v1.2.3 From 1b8837b61714c3743fadb3a6bbb57ffd53839e7c Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 12 Mar 2018 15:51:26 +0100 Subject: ARM: 8750/1: deflate_xip_data.sh: minor fixes Send nm complaints about broken pipe (when sed exits early) to /dev/null. All errors should be printed to stderr. Don't trap on normal exit so the trap can return an error code. Signed-off-by: Nicolas Pitre Tested-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/boot/deflate_xip_data.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh index 1189598a25eb..5e7d758ebdd6 100755 --- a/arch/arm/boot/deflate_xip_data.sh +++ b/arch/arm/boot/deflate_xip_data.sh @@ -30,7 +30,7 @@ esac sym_val() { # extract hex value for symbol in $1 - local val=$($NM "$VMLINUX" | sed -n "/ $1$/{s/ .*$//p;q}") + local val=$($NM "$VMLINUX" 2>/dev/null | sed -n "/ $1\$/{s/ .*$//p;q}") [ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; } # convert from hex to decimal echo $((0x$val)) @@ -48,12 +48,12 @@ data_end=$(($_edata_loc - $base_offset)) file_end=$(stat -c "%s" "$XIPIMAGE") if [ "$file_end" != "$data_end" ]; then printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \ - $(($file_end + $base_offset)) $_edata_loc 2>&1 + $(($file_end + $base_offset)) $_edata_loc 1>&2 exit 1; fi # be ready to clean up -trap 'rm -f "$XIPIMAGE.tmp"' 0 1 2 3 +trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3 # substitute the data section by a compressed version $DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp" -- cgit v1.2.3 From 4b6eca9d6817e58ae9b3342a5974e8fd9285279e Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 23 Mar 2018 19:45:12 -0700 Subject: tools: bpftool: don't use hex numbers in JSON output JSON does not accept hex numbers with 0x prefix. Simply print as decimal numbers, JSON should be primarily machine-readable. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Fixes: 831a0aafe5c3 ("tools: bpftool: add JSON output for `bpftool map *` commands") Signed-off-by: Alexei Starovoitov --- tools/bpf/bpftool/map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c index f95fa67bb498..f509c86faede 100644 --- a/tools/bpf/bpftool/map.c +++ b/tools/bpf/bpftool/map.c @@ -428,7 +428,7 @@ static int show_map_close_json(int fd, struct bpf_map_info *info) jsonw_string_field(json_wtr, "name", info->name); jsonw_name(json_wtr, "flags"); - jsonw_printf(json_wtr, "%#x", info->map_flags); + jsonw_printf(json_wtr, "%d", info->map_flags); print_dev_json(info->ifindex, info->netns_dev, info->netns_ino); -- cgit v1.2.3 From e8a4796ee2954db9f7e9b52e5fbc66ef876752f6 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 23 Mar 2018 20:00:13 -0700 Subject: nfp: bpf: fix check of program max insn count NFP program allocation length is in bytes and NFP program length is in instructions, fix the comparison of the two. Fixes: 9314c442d7dd ("nfp: bpf: move translation prepare to offload.c") Signed-off-by: Jakub Kicinski Reviewed-by: Jiong Wang Signed-off-by: Alexei Starovoitov --- drivers/net/ethernet/netronome/nfp/bpf/jit.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c index 56451edf01c2..ecd7c33baf3c 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c @@ -74,7 +74,9 @@ nfp_meta_has_prev(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta) static void nfp_prog_push(struct nfp_prog *nfp_prog, u64 insn) { - if (nfp_prog->__prog_alloc_len == nfp_prog->prog_len) { + if (nfp_prog->__prog_alloc_len / sizeof(u64) == nfp_prog->prog_len) { + pr_warn("instruction limit reached (%u NFP instructions)\n", + nfp_prog->prog_len); nfp_prog->error = -ENOSPC; return; } @@ -2463,6 +2465,8 @@ static int nfp_translate(struct nfp_prog *nfp_prog) err = cb(nfp_prog, meta); if (err) return err; + if (nfp_prog->error) + return nfp_prog->error; nfp_prog->n_translated++; } -- cgit v1.2.3 From 32c1733f0dd4bd11d6e65512bf4dc337c0452c8e Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Thu, 22 Mar 2018 21:12:39 -0600 Subject: netfilter: nf_socket: Fix out of bounds access in nf_sk_lookup_slow_v{4,6} skb_header_pointer will copy data into a buffer if data is non linear, otherwise it will return a pointer in the linear section of the data. nf_sk_lookup_slow_v{4,6} always copies data of size udphdr but later accesses memory within the size of tcphdr (th->doff) in case of TCP packets. This causes a crash when running with KASAN with the following call stack - BUG: KASAN: stack-out-of-bounds in xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178 Read of size 2 at addr ffffffe3d417a87c by task syz-executor/28971 CPU: 2 PID: 28971 Comm: syz-executor Tainted: G B W O 4.9.65+ #1 Call trace: [] dump_backtrace+0x0/0x428 arch/arm64/kernel/traps.c:76 [] show_stack+0x28/0x38 arch/arm64/kernel/traps.c:226 [] __dump_stack lib/dump_stack.c:15 [inline] [] dump_stack+0xd4/0x124 lib/dump_stack.c:51 [] print_address_description+0x68/0x258 mm/kasan/report.c:248 [] kasan_report_error mm/kasan/report.c:347 [inline] [] kasan_report.part.2+0x228/0x2f0 mm/kasan/report.c:371 [] kasan_report+0x5c/0x70 mm/kasan/report.c:372 [] check_memory_region_inline mm/kasan/kasan.c:308 [inline] [] __asan_load2+0x84/0x98 mm/kasan/kasan.c:739 [] __tcp_hdrlen include/linux/tcp.h:35 [inline] [] xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178 Fix this by copying data into appropriate size headers based on protocol. Fixes: a583636a83ea ("inet: refactor inet[6]_lookup functions to take skb") Signed-off-by: Tejaswi Tanikella Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/nf_socket_ipv4.c | 6 ++++-- net/ipv6/netfilter/nf_socket_ipv6.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/netfilter/nf_socket_ipv4.c b/net/ipv4/netfilter/nf_socket_ipv4.c index e9293bdebba0..4824b1e183a1 100644 --- a/net/ipv4/netfilter/nf_socket_ipv4.c +++ b/net/ipv4/netfilter/nf_socket_ipv4.c @@ -108,10 +108,12 @@ struct sock *nf_sk_lookup_slow_v4(struct net *net, const struct sk_buff *skb, int doff = 0; if (iph->protocol == IPPROTO_UDP || iph->protocol == IPPROTO_TCP) { - struct udphdr _hdr, *hp; + struct tcphdr _hdr; + struct udphdr *hp; hp = skb_header_pointer(skb, ip_hdrlen(skb), - sizeof(_hdr), &_hdr); + iph->protocol == IPPROTO_UDP ? + sizeof(*hp) : sizeof(_hdr), &_hdr); if (hp == NULL) return NULL; diff --git a/net/ipv6/netfilter/nf_socket_ipv6.c b/net/ipv6/netfilter/nf_socket_ipv6.c index ebb2bf84232a..f14de4b6d639 100644 --- a/net/ipv6/netfilter/nf_socket_ipv6.c +++ b/net/ipv6/netfilter/nf_socket_ipv6.c @@ -116,9 +116,11 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb, } if (tproto == IPPROTO_UDP || tproto == IPPROTO_TCP) { - struct udphdr _hdr, *hp; + struct tcphdr _hdr; + struct udphdr *hp; - hp = skb_header_pointer(skb, thoff, sizeof(_hdr), &_hdr); + hp = skb_header_pointer(skb, thoff, tproto == IPPROTO_UDP ? + sizeof(*hp) : sizeof(_hdr), &_hdr); if (hp == NULL) return NULL; -- cgit v1.2.3 From cfb2f6f6e0ba11ea7b263d6b69c170c4b32ac0ea Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 24 Mar 2018 11:28:14 -0500 Subject: Revert "mqueue: switch to on-demand creation of internal mount" This reverts commit 36735a6a2b5e042db1af956ce4bcc13f3ff99e21. Aleksa Sarai writes: > [REGRESSION v4.16-rc6] [PATCH] mqueue: forbid unprivileged user access to internal mount > > Felix reported weird behaviour on 4.16.0-rc6 with regards to mqueue[1], > which was introduced by 36735a6a2b5e ("mqueue: switch to on-demand > creation of internal mount"). > > Basically, the reproducer boils down to being able to mount mqueue if > you create a new user namespace, even if you don't unshare the IPC > namespace. > > Previously this was not possible, and you would get an -EPERM. The mount > is the *host* mqueue mount, which is being cached and just returned from > mqueue_mount(). To be honest, I'm not sure if this is safe or not (or if > it was intentional -- since I'm not familiar with mqueue). > > To me it looks like there is a missing permission check. I've included a > patch below that I've compile-tested, and should block the above case. > Can someone please tell me if I'm missing something? Is this actually > safe? > > [1]: https://github.com/docker/docker/issues/36674 The issue is a lot deeper than a missing permission check. sb->s_user_ns was is improperly set as well. So in addition to the filesystem being mounted when it should not be mounted, so things are not allow that should be. We are practically to the release of 4.16 and there is no agreement between Al Viro and myself on what the code should looks like to fix things properly. So revert the code to what it was before so that we can take our time and discuss this properly. Fixes: 36735a6a2b5e ("mqueue: switch to on-demand creation of internal mount") Reported-by: Felix Abecassis Reported-by: Aleksa Sarai Signed-off-by: "Eric W. Biederman" --- ipc/mqueue.c | 74 ++++++++++++++++-------------------------------------------- 1 file changed, 19 insertions(+), 55 deletions(-) diff --git a/ipc/mqueue.c b/ipc/mqueue.c index d7f309f74dec..a808f29d4c5a 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -325,9 +325,8 @@ err: static int mqueue_fill_super(struct super_block *sb, void *data, int silent) { struct inode *inode; - struct ipc_namespace *ns = data; + struct ipc_namespace *ns = sb->s_fs_info; - sb->s_fs_info = ns; sb->s_iflags |= SB_I_NOEXEC | SB_I_NODEV; sb->s_blocksize = PAGE_SIZE; sb->s_blocksize_bits = PAGE_SHIFT; @@ -344,44 +343,18 @@ static int mqueue_fill_super(struct super_block *sb, void *data, int silent) return 0; } -static struct file_system_type mqueue_fs_type; -/* - * Return value is pinned only by reference in ->mq_mnt; it will - * live until ipcns dies. Caller does not need to drop it. - */ -static struct vfsmount *mq_internal_mount(void) -{ - struct ipc_namespace *ns = current->nsproxy->ipc_ns; - struct vfsmount *m = ns->mq_mnt; - if (m) - return m; - m = kern_mount_data(&mqueue_fs_type, ns); - spin_lock(&mq_lock); - if (unlikely(ns->mq_mnt)) { - spin_unlock(&mq_lock); - if (!IS_ERR(m)) - kern_unmount(m); - return ns->mq_mnt; - } - if (!IS_ERR(m)) - ns->mq_mnt = m; - spin_unlock(&mq_lock); - return m; -} - static struct dentry *mqueue_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *data) { - struct vfsmount *m; - if (flags & SB_KERNMOUNT) - return mount_nodev(fs_type, flags, data, mqueue_fill_super); - m = mq_internal_mount(); - if (IS_ERR(m)) - return ERR_CAST(m); - atomic_inc(&m->mnt_sb->s_active); - down_write(&m->mnt_sb->s_umount); - return dget(m->mnt_root); + struct ipc_namespace *ns; + if (flags & SB_KERNMOUNT) { + ns = data; + data = NULL; + } else { + ns = current->nsproxy->ipc_ns; + } + return mount_ns(fs_type, flags, data, ns, ns->user_ns, mqueue_fill_super); } static void init_once(void *foo) @@ -771,16 +744,13 @@ static int prepare_open(struct dentry *dentry, int oflag, int ro, static int do_mq_open(const char __user *u_name, int oflag, umode_t mode, struct mq_attr *attr) { - struct vfsmount *mnt = mq_internal_mount(); - struct dentry *root; + struct vfsmount *mnt = current->nsproxy->ipc_ns->mq_mnt; + struct dentry *root = mnt->mnt_root; struct filename *name; struct path path; int fd, error; int ro; - if (IS_ERR(mnt)) - return PTR_ERR(mnt); - audit_mq_open(oflag, mode, attr); if (IS_ERR(name = getname(u_name))) @@ -791,7 +761,6 @@ static int do_mq_open(const char __user *u_name, int oflag, umode_t mode, goto out_putname; ro = mnt_want_write(mnt); /* we'll drop it in any case */ - root = mnt->mnt_root; inode_lock(d_inode(root)); path.dentry = lookup_one_len(name->name, root, strlen(name->name)); if (IS_ERR(path.dentry)) { @@ -840,9 +809,6 @@ SYSCALL_DEFINE1(mq_unlink, const char __user *, u_name) struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns; struct vfsmount *mnt = ipc_ns->mq_mnt; - if (!mnt) - return -ENOENT; - name = getname(u_name); if (IS_ERR(name)) return PTR_ERR(name); @@ -1569,26 +1535,28 @@ int mq_init_ns(struct ipc_namespace *ns) ns->mq_msgsize_max = DFLT_MSGSIZEMAX; ns->mq_msg_default = DFLT_MSG; ns->mq_msgsize_default = DFLT_MSGSIZE; - ns->mq_mnt = NULL; + ns->mq_mnt = kern_mount_data(&mqueue_fs_type, ns); + if (IS_ERR(ns->mq_mnt)) { + int err = PTR_ERR(ns->mq_mnt); + ns->mq_mnt = NULL; + return err; + } return 0; } void mq_clear_sbinfo(struct ipc_namespace *ns) { - if (ns->mq_mnt) - ns->mq_mnt->mnt_sb->s_fs_info = NULL; + ns->mq_mnt->mnt_sb->s_fs_info = NULL; } void mq_put_mnt(struct ipc_namespace *ns) { - if (ns->mq_mnt) - kern_unmount(ns->mq_mnt); + kern_unmount(ns->mq_mnt); } static int __init init_mqueue_fs(void) { - struct vfsmount *m; int error; mqueue_inode_cachep = kmem_cache_create("mqueue_inode_cache", @@ -1610,10 +1578,6 @@ static int __init init_mqueue_fs(void) if (error) goto out_filesystem; - m = kern_mount_data(&mqueue_fs_type, &init_ipc_ns); - if (IS_ERR(m)) - goto out_filesystem; - init_ipc_ns.mq_mnt = m; return 0; out_filesystem: -- cgit v1.2.3 From f1869a890cdedb92a3fab969db5d0fd982850273 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 24 Mar 2018 10:43:26 +0100 Subject: tty: vt: fix up tabstops properly Tabs on a console with long lines do not wrap properly, so correctly account for the line length when computing the tab placement location. Reported-by: James Holderness Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by: Linus Torvalds --- drivers/tty/vt/vt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 88b902c525d7..b4e57c5a8bba 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1727,7 +1727,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) default_attr(vc); update_attr(vc); - vc->vc_tab_stop[0] = 0x01010100; + vc->vc_tab_stop[0] = vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = @@ -1771,7 +1771,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_pos -= (vc->vc_x << 1); while (vc->vc_x < vc->vc_cols - 1) { vc->vc_x++; - if (vc->vc_tab_stop[vc->vc_x >> 5] & (1 << (vc->vc_x & 31))) + if (vc->vc_tab_stop[7 & (vc->vc_x >> 5)] & (1 << (vc->vc_x & 31))) break; } vc->vc_pos += (vc->vc_x << 1); @@ -1831,7 +1831,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) lf(vc); return; case 'H': - vc->vc_tab_stop[vc->vc_x >> 5] |= (1 << (vc->vc_x & 31)); + vc->vc_tab_stop[7 & (vc->vc_x >> 5)] |= (1 << (vc->vc_x & 31)); return; case 'Z': respond_ID(tty); @@ -2024,7 +2024,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) return; case 'g': if (!vc->vc_par[0]) - vc->vc_tab_stop[vc->vc_x >> 5] &= ~(1 << (vc->vc_x & 31)); + vc->vc_tab_stop[7 & (vc->vc_x >> 5)] &= ~(1 << (vc->vc_x & 31)); else if (vc->vc_par[0] == 3) { vc->vc_tab_stop[0] = vc->vc_tab_stop[1] = -- cgit v1.2.3 From 52396500f97c53860164debc7d4f759077853423 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Fri, 23 Mar 2018 15:53:38 +1000 Subject: powerpc/64s: Fix i-side SLB miss bad address handler saving nonvolatile GPRs The SLB bad address handler's trap number fixup does not preserve the low bit that indicates nonvolatile GPRs have not been saved. This leads save_nvgprs to skip saving them, and subsequent functions and return from interrupt will think they are saved. This causes kernel branch-to-garbage debugging to not have correct registers, can also cause userspace to have its registers clobbered after a segfault. Fixes: f0f558b131db ("powerpc/mm: Preserve CFAR value on SLB miss caused by access to bogus address") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/exceptions-64s.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3ac87e53b3da..1ecfd8ffb098 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -706,7 +706,7 @@ EXC_COMMON_BEGIN(bad_addr_slb) ld r3, PACA_EXSLB+EX_DAR(r13) std r3, _DAR(r1) beq cr6, 2f - li r10, 0x480 /* fix trap number for I-SLB miss */ + li r10, 0x481 /* fix trap number for I-SLB miss */ std r10, _TRAP(r1) 2: bl save_nvgprs addi r3, r1, STACK_FRAME_OVERHEAD -- cgit v1.2.3 From 3eb2ce825ea1ad89d20f7a3b5780df850e4be274 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 25 Mar 2018 12:44:30 -1000 Subject: Linux 4.16-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 486db374d1c1..7ba478ab8c82 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 16 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Fearless Coyote # *DOCUMENTATION* -- cgit v1.2.3 From bc58a1baf2a97838a422ce4e75180c4b680e7a9b Mon Sep 17 00:00:00 2001 From: Hans Wippel Date: Fri, 23 Mar 2018 11:05:45 +0100 Subject: net/ipv4: disable SMC TCP option with SYN Cookies Currently, the SMC experimental TCP option in a SYN packet is lost on the server side when SYN Cookies are active. However, the corresponding SYNACK sent back to the client contains the SMC option. This causes an inconsistent view of the SMC capabilities on the client and server. This patch disables the SMC option in the SYNACK when SYN Cookies are active to avoid this issue. Fixes: 60e2a7780793b ("tcp: TCP experimental option for SMC") Signed-off-by: Hans Wippel Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/ipv4/syncookies.c | 2 ++ net/ipv4/tcp_input.c | 3 +++ net/ipv6/syncookies.c | 2 ++ 3 files changed, 7 insertions(+) diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c index fda37f2862c9..c3387dfd725b 100644 --- a/net/ipv4/syncookies.c +++ b/net/ipv4/syncookies.c @@ -349,6 +349,8 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb) req->ts_recent = tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0; treq->snt_synack = 0; treq->tfo_listener = false; + if (IS_ENABLED(CONFIG_SMC)) + ireq->smc_ok = 0; ireq->ir_iif = inet_request_bound_dev_if(sk, skb); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 9a1b3c1c1c14..ff6cd98ce8d5 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -6256,6 +6256,9 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops, if (want_cookie && !tmp_opt.saw_tstamp) tcp_clear_options(&tmp_opt); + if (IS_ENABLED(CONFIG_SMC) && want_cookie) + tmp_opt.smc_ok = 0; + tmp_opt.tstamp_ok = tmp_opt.saw_tstamp; tcp_openreq_init(req, &tmp_opt, skb, sk); inet_rsk(req)->no_srccheck = inet_sk(sk)->transparent; diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index e7a3a6b6cf56..e997141aed8c 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -217,6 +217,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) treq->snt_isn = cookie; treq->ts_off = 0; treq->txhash = net_tx_rndhash(); + if (IS_ENABLED(CONFIG_SMC)) + ireq->smc_ok = 0; /* * We need to lookup the dst_entry to get the correct window size. -- cgit v1.2.3 From e69647a19c870c2f919e4d5023af8a515e8ef25f Mon Sep 17 00:00:00 2001 From: Raghuram Chary J Date: Fri, 23 Mar 2018 15:48:08 +0530 Subject: lan78xx: Set ASD in MAC_CR when EEE is enabled. Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 60a604cc7647..90d176279152 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2351,6 +2351,7 @@ static int lan78xx_reset(struct lan78xx_net *dev) u32 buf; int ret = 0; unsigned long timeout; + u8 sig; ret = lan78xx_read_reg(dev, HW_CFG, &buf); buf |= HW_CFG_LRST_; @@ -2450,6 +2451,15 @@ static int lan78xx_reset(struct lan78xx_net *dev) /* LAN7801 only has RGMII mode */ if (dev->chipid == ID_REV_CHIP_ID_7801_) buf &= ~MAC_CR_GMII_EN_; + + if (dev->chipid == ID_REV_CHIP_ID_7800_) { + ret = lan78xx_read_raw_eeprom(dev, 0, 1, &sig); + if (!ret && sig != EEPROM_INDICATOR) { + /* Implies there is no external eeprom. Set mac speed */ + netdev_info(dev->net, "No External EEPROM. Setting MAC Speed\n"); + buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_; + } + } ret = lan78xx_write_reg(dev, MAC_CR, buf); ret = lan78xx_read_reg(dev, MAC_TX, &buf); -- cgit v1.2.3 From 7880287981b60a6808f39f297bb66936e8bdf57a Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Fri, 23 Mar 2018 13:49:02 +0100 Subject: netlink: make sure nladdr has correct size in netlink_connect() KMSAN reports use of uninitialized memory in the case when |alen| is smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't fully copied from the userspace. Signed-off-by: Alexander Potapenko Fixes: 1da177e4c3f41524 ("Linux-2.6.12-rc2") Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 07e8478068f0..70c455341243 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1085,6 +1085,9 @@ static int netlink_connect(struct socket *sock, struct sockaddr *addr, if (addr->sa_family != AF_NETLINK) return -EINVAL; + if (alen < sizeof(struct sockaddr_nl)) + return -EINVAL; + if ((nladdr->nl_groups || nladdr->nl_pid) && !netlink_allowed(sock, NL_CFG_F_NONROOT_SEND)) return -EPERM; -- cgit v1.2.3 From 10b8a3de603df7b96004179b1b33b1708c76d144 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 23 Mar 2018 14:47:30 +0100 Subject: ipv6: the entire IPv6 header chain must fit the first fragment While building ipv6 datagram we currently allow arbitrary large extheaders, even beyond pmtu size. The syzbot has found a way to exploit the above to trigger the following splat: kernel BUG at ./include/linux/skbuff.h:2073! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline] RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293 RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18 RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000 R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6 R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0 FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:969 [inline] udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073 udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136 SYSC_sendmmsg net/socket.c:2167 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2162 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4404c9 RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9 RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0 R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000 Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29 5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d 87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0 RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: ffff8801bc18f0f0 As stated by RFC 7112 section 5: When a host fragments an IPv6 datagram, it MUST include the entire IPv6 Header Chain in the First Fragment. So this patch addresses the issue dropping datagrams with excessive extheader length. It also updates the error path to report to the calling socket nonnegative pmtu values. The issue apparently predates git history. v1 -> v2: cleanup error path, as per Eric's suggestion Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index a8a919520090..5cb18c8ba9b2 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1246,7 +1246,7 @@ static int __ip6_append_data(struct sock *sk, const struct sockcm_cookie *sockc) { struct sk_buff *skb, *skb_prev = NULL; - unsigned int maxfraglen, fragheaderlen, mtu, orig_mtu; + unsigned int maxfraglen, fragheaderlen, mtu, orig_mtu, pmtu; int exthdrlen = 0; int dst_exthdrlen = 0; int hh_len; @@ -1282,6 +1282,12 @@ static int __ip6_append_data(struct sock *sk, sizeof(struct frag_hdr) : 0) + rt->rt6i_nfheader_len; + /* as per RFC 7112 section 5, the entire IPv6 Header Chain must fit + * the first fragment + */ + if (headersize + transhdrlen > mtu) + goto emsgsize; + if (cork->length + length > mtu - headersize && ipc6->dontfrag && (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_RAW)) { @@ -1297,9 +1303,8 @@ static int __ip6_append_data(struct sock *sk, if (cork->length + length > maxnonfragsize - headersize) { emsgsize: - ipv6_local_error(sk, EMSGSIZE, fl6, - mtu - headersize + - sizeof(struct ipv6hdr)); + pmtu = max_t(int, mtu - headersize + sizeof(struct ipv6hdr), 0); + ipv6_local_error(sk, EMSGSIZE, fl6, pmtu); return -EMSGSIZE; } -- cgit v1.2.3 From 9066ae7ff5d89c0b5daa271e2d573540097a94fa Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 26 Mar 2018 16:10:21 +0200 Subject: ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent() When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB area, as the page offset is outside of the VMA range (size), which is currently used as size parameter in snd_pcm_lib_default_mmap(). By using the DMA buffer size (dma_bytes) instead, the complete DMA buffer can be mmapp'ed and the issue is fixed. This issue was detected on an ARM platform (TI AM57xx) using the RME HDSP MADI PCIe soundcard. Fixes: 657b1989dacf ("ALSA: pcm - Use dma_mmap_coherent() if available") Signed-off-by: Stefan Roese Cc: Signed-off-by: Takashi Iwai --- sound/core/pcm_native.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 77ba50ddcf9e..d18b3982548b 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3422,7 +3422,7 @@ int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream, area, substream->runtime->dma_area, substream->runtime->dma_addr, - area->vm_end - area->vm_start); + substream->runtime->dma_bytes); #endif /* CONFIG_X86 */ /* mmap with fault handler */ area->vm_ops = &snd_pcm_vm_ops_data_fault; -- cgit v1.2.3 From 16e693c55eae355810ad805cce5bffd566bf77fc Mon Sep 17 00:00:00 2001 From: Sanjeev Gupta Date: Sat, 24 Mar 2018 13:07:42 +0800 Subject: Documentation/isdn: check and fix dead links ... and switch to https where possible. All links have been eyeballed to verify that the domains have not changed, etc. Signed-off-by: Sanjeev Gupta Signed-off-by: David S. Miller --- Documentation/isdn/INTERFACE.CAPI | 2 +- Documentation/isdn/README | 4 ++-- Documentation/isdn/README.FAQ | 4 ++-- Documentation/isdn/README.gigaset | 16 +++++++++------- 4 files changed, 14 insertions(+), 12 deletions(-) diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 1688b5a1fd77..021aa9cf139d 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -18,7 +18,7 @@ corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both directions between the application and the hardware driver. Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. -This standard is freely available from http://www.capi.org. +This standard is freely available from https://www.capi.org. 2. Driver and Device Registration diff --git a/Documentation/isdn/README b/Documentation/isdn/README index 32d4e80c2c03..74bd2bdb455b 100644 --- a/Documentation/isdn/README +++ b/Documentation/isdn/README @@ -33,10 +33,10 @@ README for the ISDN-subsystem de.alt.comm.isdn4linux There is also a well maintained FAQ in English available at - http://www.mhessler.de/i4lfaq/ + https://www.mhessler.de/i4lfaq/ It can be viewed online, or downloaded in sgml/text/html format. The FAQ can also be viewed online at - http://www.isdn4linux.de/faq/ + https://www.isdn4linux.de/faq/i4lfaq.html or downloaded from ftp://ftp.isdn4linux.de/pub/isdn4linux/FAQ/ diff --git a/Documentation/isdn/README.FAQ b/Documentation/isdn/README.FAQ index 356f7944641d..e5dd1addacdd 100644 --- a/Documentation/isdn/README.FAQ +++ b/Documentation/isdn/README.FAQ @@ -8,9 +8,9 @@ You find it in: In case you just want to see the FAQ online, or download the newest version, you can have a look at my website: -http://www.mhessler.de/i4lfaq/ (view + download) +https://www.mhessler.de/i4lfaq/ (view + download) or: -http://www.isdn4linux.de/faq/ (view) +https://www.isdn4linux.de/faq/4lfaq.html (view) As the extension tells, the FAQ is in SGML format, and you can convert it into text/html/... format by using the sgml2txt/sgml2html/... tools. diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 7534c6039adc..9b1ce277ca3d 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -29,8 +29,9 @@ GigaSet 307x Device Driver T-Com Sinus 721 data Chicago 390 USB (KPN) - See also http://www.erbze.info/sinus_gigaset.htm and - http://gigaset307x.sourceforge.net/ + See also http://www.erbze.info/sinus_gigaset.htm + (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm ) and + http://gigaset307x.sourceforge.net/ We had also reports from users of Gigaset M105 who could use the drivers with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.) @@ -52,7 +53,7 @@ GigaSet 307x Device Driver to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data). There are some user space tools available at - http://sourceforge.net/projects/gigaset307x/ + https://sourceforge.net/projects/gigaset307x/ which provide access to additional device specific functions like SMS, phonebook or call journal. @@ -202,7 +203,7 @@ GigaSet 307x Device Driver You can use some configuration tool of your distribution to configure this "modem" or configure pppd/wvdial manually. There are some example ppp configuration files and chat scripts in the gigaset-VERSION/ppp directory - in the driver packages from http://sourceforge.net/projects/gigaset307x/. + in the driver packages from https://sourceforge.net/projects/gigaset307x/. Please note that the USB drivers are not able to change the state of the control lines. This means you must use "Stupid Mode" if you are using wvdial or you should use the nocrtscts option of pppd. @@ -361,7 +362,7 @@ GigaSet 307x Device Driver --------------------------- If you can't solve problems with the driver on your own, feel free to use one of the forums, bug trackers, or mailing lists on - http://sourceforge.net/projects/gigaset307x + https://sourceforge.net/projects/gigaset307x or write an electronic mail to the maintainers. Try to provide as much information as possible, such as @@ -391,11 +392,12 @@ GigaSet 307x Device Driver 4. Links, other software --------------------- - Sourceforge project developing this driver and associated tools - http://sourceforge.net/projects/gigaset307x + https://sourceforge.net/projects/gigaset307x - Yahoo! Group on the Siemens Gigaset family of devices - http://de.groups.yahoo.com/group/Siemens-Gigaset + https://de.groups.yahoo.com/group/Siemens-Gigaset - Siemens Gigaset/T-Sinus compatibility table http://www.erbze.info/sinus_gigaset.htm + (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm ) 5. Credits -- cgit v1.2.3 From 743989254ea9f132517806d8893ca9b6cf9dc86b Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sat, 24 Mar 2018 22:08:14 +0100 Subject: net: qmi_wwan: add BroadMobi BM806U 2020:2033 BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. The USB id is added to qmi_wwan.c to allow QMI communication with the BM806U. Tested on 4.14 kernel and OpenWRT. Signed-off-by: Pawel Dembicki Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 76ac48095c29..7ced28859261 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1180,6 +1180,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */ {QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */ + {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ -- cgit v1.2.3 From eb82a994479245a79647d302f9b4eb8e7c9d7ca6 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 24 Mar 2018 22:25:06 -0700 Subject: net: sched, fix OOO packets with pfifo_fast After the qdisc lock was dropped in pfifo_fast we allow multiple enqueue threads and dequeue threads to run in parallel. On the enqueue side the skb bit ooo_okay is used to ensure all related skbs are enqueued in-order. On the dequeue side though there is no similar logic. What we observe is with fewer queues than CPUs it is possible to re-order packets when two instances of __qdisc_run() are running in parallel. Each thread will dequeue a skb and then whichever thread calls the ndo op first will be sent on the wire. This doesn't typically happen because qdisc_run() is usually triggered by the same core that did the enqueue. However, drivers will trigger __netif_schedule() when queues are transitioning from stopped to awake using the netif_tx_wake_* APIs. When this happens netif_schedule() calls qdisc_run() on the same CPU that did the netif_tx_wake_* which is usually done in the interrupt completion context. This CPU is selected with the irq affinity which is unrelated to the enqueue operations. To resolve this we add a RUNNING bit to the qdisc to ensure only a single dequeue per qdisc is running. Enqueue and dequeue operations can still run in parallel and also on multi queue NICs we can still have a dequeue in-flight per qdisc, which is typically per CPU. Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Reported-by: Jakob Unterwurzacher Signed-off-by: John Fastabend Signed-off-by: David S. Miller --- include/net/sch_generic.h | 1 + net/sched/sch_generic.c | 17 +++++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index 2092d33194dd..8da32678ce18 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -30,6 +30,7 @@ struct qdisc_rate_table { enum qdisc_state_t { __QDISC_STATE_SCHED, __QDISC_STATE_DEACTIVATED, + __QDISC_STATE_RUNNING, }; struct qdisc_size_table { diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 7e3fbe9cc936..39c144b6ff98 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -373,24 +373,33 @@ bool sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q, */ static inline bool qdisc_restart(struct Qdisc *q, int *packets) { + bool more, validate, nolock = q->flags & TCQ_F_NOLOCK; spinlock_t *root_lock = NULL; struct netdev_queue *txq; struct net_device *dev; struct sk_buff *skb; - bool validate; /* Dequeue packet */ + if (nolock && test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) + return false; + skb = dequeue_skb(q, &validate, packets); - if (unlikely(!skb)) + if (unlikely(!skb)) { + if (nolock) + clear_bit(__QDISC_STATE_RUNNING, &q->state); return false; + } - if (!(q->flags & TCQ_F_NOLOCK)) + if (!nolock) root_lock = qdisc_lock(q); dev = qdisc_dev(q); txq = skb_get_tx_queue(dev, skb); - return sch_direct_xmit(skb, q, dev, txq, root_lock, validate); + more = sch_direct_xmit(skb, q, dev, txq, root_lock, validate); + if (nolock) + clear_bit(__QDISC_STATE_RUNNING, &q->state); + return more; } void __qdisc_run(struct Qdisc *q) -- cgit v1.2.3 From 5c78f6bfae2b10ff70e21d343e64584ea6280c26 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:16:45 +0800 Subject: bonding: fix the err path for dev hwaddr sync in bond_enslave vlan_vids_add_by_dev is called right after dev hwaddr sync, so on the err path it should unsync dev hwaddr. Otherwise, the slave dev's hwaddr will never be unsync when this err happens. Fixes: 1ff412ad7714 ("bonding: change the bond's vlan syncing functions with the standard ones") Signed-off-by: Xin Long Reviewed-by: Nikolay Aleksandrov Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c669554d70bb..0c299de4f2ef 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1565,7 +1565,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, if (res) { netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n", slave_dev->name); - goto err_close; + goto err_hwaddr_unsync; } prev_slave = bond_last_slave(bond); @@ -1755,9 +1755,6 @@ err_unregister: netdev_rx_handler_unregister(slave_dev); err_detach: - if (!bond_uses_primary(bond)) - bond_hw_addr_flush(bond_dev, slave_dev); - vlan_vids_del_by_dev(slave_dev, bond_dev); if (rcu_access_pointer(bond->primary_slave) == new_slave) RCU_INIT_POINTER(bond->primary_slave, NULL); @@ -1771,6 +1768,10 @@ err_detach: synchronize_rcu(); slave_disable_netpoll(new_slave); +err_hwaddr_unsync: + if (!bond_uses_primary(bond)) + bond_hw_addr_flush(bond_dev, slave_dev); + err_close: slave_dev->priv_flags &= ~IFF_BONDING; dev_close(slave_dev); -- cgit v1.2.3 From ae42cc62a9f07f1f6979054ed92606b9c30f4a2e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:16:46 +0800 Subject: bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave Beniamino found a crash when adding vlan as slave of bond which is also the parent link: ip link add bond1 type bond ip link set bond1 up ip link add link bond1 vlan1 type vlan id 80 ip link set vlan1 master bond1 The call trace is as below: [] queued_spin_lock_slowpath+0xb/0xf [] _raw_spin_lock+0x20/0x30 [] dev_mc_sync+0x37/0x80 [] vlan_dev_set_rx_mode+0x1c/0x30 [8021q] [] __dev_set_rx_mode+0x5a/0xa0 [] dev_mc_sync_multiple+0x78/0x80 [] bond_enslave+0x67c/0x1190 [bonding] [] do_setlink+0x9c9/0xe50 [] rtnl_newlink+0x522/0x880 [] rtnetlink_rcv_msg+0xa7/0x260 [] netlink_rcv_skb+0xab/0xc0 [] rtnetlink_rcv+0x28/0x30 [] netlink_unicast+0x170/0x210 [] netlink_sendmsg+0x308/0x420 [] sock_sendmsg+0xb6/0xf0 This is actually a dead lock caused by sync slave hwaddr from master when the master is the slave's 'slave'. This dead loop check is actually done by netdev_master_upper_dev_link. However, Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") moved it after dev_mc_sync. This patch is to fix it by moving dev_mc_sync after master_upper_dev_link, so that this loop check would be earlier than dev_mc_sync. It also moves if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an improvement. Note team driver also has this issue, I will fix it in another patch. Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Reported-by: Beniamino Galvani Signed-off-by: Xin Long Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 73 ++++++++++++++++++++--------------------- 1 file changed, 35 insertions(+), 38 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 0c299de4f2ef..55e198554ec0 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1528,44 +1528,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, goto err_close; } - /* If the mode uses primary, then the following is handled by - * bond_change_active_slave(). - */ - if (!bond_uses_primary(bond)) { - /* set promiscuity level to new slave */ - if (bond_dev->flags & IFF_PROMISC) { - res = dev_set_promiscuity(slave_dev, 1); - if (res) - goto err_close; - } - - /* set allmulti level to new slave */ - if (bond_dev->flags & IFF_ALLMULTI) { - res = dev_set_allmulti(slave_dev, 1); - if (res) - goto err_close; - } - - netif_addr_lock_bh(bond_dev); - - dev_mc_sync_multiple(slave_dev, bond_dev); - dev_uc_sync_multiple(slave_dev, bond_dev); - - netif_addr_unlock_bh(bond_dev); - } - - if (BOND_MODE(bond) == BOND_MODE_8023AD) { - /* add lacpdu mc addr to mc list */ - u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; - - dev_mc_add(slave_dev, lacpdu_multicast); - } - res = vlan_vids_add_by_dev(slave_dev, bond_dev); if (res) { netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n", slave_dev->name); - goto err_hwaddr_unsync; + goto err_close; } prev_slave = bond_last_slave(bond); @@ -1725,6 +1692,37 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, goto err_upper_unlink; } + /* If the mode uses primary, then the following is handled by + * bond_change_active_slave(). + */ + if (!bond_uses_primary(bond)) { + /* set promiscuity level to new slave */ + if (bond_dev->flags & IFF_PROMISC) { + res = dev_set_promiscuity(slave_dev, 1); + if (res) + goto err_sysfs_del; + } + + /* set allmulti level to new slave */ + if (bond_dev->flags & IFF_ALLMULTI) { + res = dev_set_allmulti(slave_dev, 1); + if (res) + goto err_sysfs_del; + } + + netif_addr_lock_bh(bond_dev); + dev_mc_sync_multiple(slave_dev, bond_dev); + dev_uc_sync_multiple(slave_dev, bond_dev); + netif_addr_unlock_bh(bond_dev); + + if (BOND_MODE(bond) == BOND_MODE_8023AD) { + /* add lacpdu mc addr to mc list */ + u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; + + dev_mc_add(slave_dev, lacpdu_multicast); + } + } + bond->slave_cnt++; bond_compute_features(bond); bond_set_carrier(bond); @@ -1748,6 +1746,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, return 0; /* Undo stages on error */ +err_sysfs_del: + bond_sysfs_slave_del(new_slave); + err_upper_unlink: bond_upper_dev_unlink(bond, new_slave); @@ -1768,10 +1769,6 @@ err_detach: synchronize_rcu(); slave_disable_netpoll(new_slave); -err_hwaddr_unsync: - if (!bond_uses_primary(bond)) - bond_hw_addr_flush(bond_dev, slave_dev); - err_close: slave_dev->priv_flags &= ~IFF_BONDING; dev_close(slave_dev); -- cgit v1.2.3 From 9f5a90c107741b864398f4ac0014711a8c1d8474 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:16:47 +0800 Subject: bonding: process the err returned by dev_set_allmulti properly in bond_enslave When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails, dev_set_promiscuity(-1) should be done before going to the err path. Otherwise, dev->promiscuity will leak. Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti") Signed-off-by: Xin Long Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 55e198554ec0..b7b113018853 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1706,8 +1706,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, /* set allmulti level to new slave */ if (bond_dev->flags & IFF_ALLMULTI) { res = dev_set_allmulti(slave_dev, 1); - if (res) + if (res) { + if (bond_dev->flags & IFF_PROMISC) + dev_set_promiscuity(slave_dev, -1); goto err_sysfs_del; + } } netif_addr_lock_bh(bond_dev); -- cgit v1.2.3 From 982cf3b3999d39a2eaca0a65542df33c19b5d814 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:25:06 +0800 Subject: team: move dev_mc_sync after master_upper_dev_link in team_port_add The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave' is needed for team driver. The panic can be reproduced easily: ip link add team1 type team ip link set team1 up ip link add link team1 vlan1 type vlan id 80 ip link set vlan1 master team1 Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Xin Long Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 56c701b73c12..befed2d22bf4 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1197,11 +1197,6 @@ static int team_port_add(struct team *team, struct net_device *port_dev) goto err_dev_open; } - netif_addr_lock_bh(dev); - dev_uc_sync_multiple(port_dev, dev); - dev_mc_sync_multiple(port_dev, dev); - netif_addr_unlock_bh(dev); - err = vlan_vids_add_by_dev(port_dev, dev); if (err) { netdev_err(dev, "Failed to add vlan ids to device %s\n", @@ -1241,6 +1236,11 @@ static int team_port_add(struct team *team, struct net_device *port_dev) goto err_option_port_add; } + netif_addr_lock_bh(dev); + dev_uc_sync_multiple(port_dev, dev); + dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); + port->index = -1; list_add_tail_rcu(&port->list, &team->port_list); team_port_enable(team, port); @@ -1265,8 +1265,6 @@ err_enable_netpoll: vlan_vids_del_by_dev(port_dev, dev); err_vids_add: - dev_uc_unsync(port_dev, dev); - dev_mc_unsync(port_dev, dev); dev_close(port_dev); err_dev_open: -- cgit v1.2.3 From f3d801baf118c9d452ee7c278df16880c892e669 Mon Sep 17 00:00:00 2001 From: Torsten Hilbrich Date: Mon, 26 Mar 2018 07:19:57 +0200 Subject: net/usb/qmi_wwan.c: Add USB id for lt4120 modem This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by: Torsten Hilbrich Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 7ced28859261..2508ab08fc5a 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1241,6 +1241,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ + {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ {QMI_FIXED_INTF(0x1e0e, 0x9001, 5)}, /* SIMCom 7230E */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */ -- cgit v1.2.3 From aaa3149bbee9ba9b4e6f0bd6e3e7d191edeae942 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 26 Mar 2018 16:10:23 +0800 Subject: vhost_net: add missing lock nesting notation We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len() after RX virtqueue mutex is held in handle_rx(). This requires an appropriate lock nesting notation to calm down deadlock detector. Fixes: 0308813724606 ("vhost_net: basic polling support") Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/net.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 8139bc70ad7d..12bcfbac2cc9 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -630,7 +630,7 @@ static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock *sk) if (!len && vq->busyloop_timeout) { /* Both tx vq and rx socket were polled here */ - mutex_lock(&vq->mutex); + mutex_lock_nested(&vq->mutex, 1); vhost_disable_notify(&net->dev, vq); preempt_disable(); @@ -763,7 +763,7 @@ static void handle_rx(struct vhost_net *net) struct iov_iter fixup; __virtio16 num_buffers; - mutex_lock(&vq->mutex); + mutex_lock_nested(&vq->mutex, 0); sock = vq->private_data; if (!sock) goto out; -- cgit v1.2.3 From 1c82c9e1f2ba9f32ac41012b91abddd639010f7a Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 26 Mar 2018 18:07:09 +0800 Subject: net: dsa: mt7530: remove redundant MODULE_ALIAS entries MODULE_ALIAS exports information to allow the module to be auto-loaded at boot for the drivers registered using legacy platform registration. However, currently the driver is always used by DT-only platform, MODULE_ALIAS is redundant and should be removed properly. Signed-off-by: Sean Wang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 8a0bb000d056..d31246cbefd1 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1424,4 +1424,3 @@ mdio_module_driver(mt7530_mdio_driver); MODULE_AUTHOR("Sean Wang "); MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mediatek-mt7530"); -- cgit v1.2.3 From 3c82b372a9f44aa224b8d5106ff6f1ad516fa8a8 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 26 Mar 2018 18:07:10 +0800 Subject: net: dsa: mt7530: fix module autoloading for OF platform drivers It's required to create a modules.alias via MODULE_DEVICE_TABLE helper for the OF platform driver. Otherwise, module autoloading cannot work. Signed-off-by: Sean Wang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index d31246cbefd1..4e53c5ce23ff 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1409,6 +1409,7 @@ static const struct of_device_id mt7530_of_match[] = { { .compatible = "mediatek,mt7530" }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(of, mt7530_of_match); static struct mdio_driver mt7530_mdio_driver = { .probe = mt7530_probe, -- cgit v1.2.3 From 84c9c8f2ac3c22924d30643894fcf7597c633d3e Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Fri, 2 Mar 2018 02:09:08 +0000 Subject: net/mlx5e: Don't override vport admin link state in switchdev mode The vport admin original link state will be re-applied after returning back to legacy mode, it is not right to change the admin link state value when in switchdev mode. Use direct vport commands to alter logical vport state in netdev representor open/close flows rather than the administrative eswitch API. Fixes: 20a1ea674783 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode') Signed-off-by: Jianbo Liu Reviewed-by: Roi Dayan Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 363d8dcb7f17..0273c233bc85 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -668,7 +668,6 @@ static int mlx5e_rep_open(struct net_device *dev) struct mlx5e_priv *priv = netdev_priv(dev); struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep = rpriv->rep; - struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; int err; mutex_lock(&priv->state_lock); @@ -676,8 +675,9 @@ static int mlx5e_rep_open(struct net_device *dev) if (err) goto unlock; - if (!mlx5_eswitch_set_vport_state(esw, rep->vport, - MLX5_ESW_VPORT_ADMIN_STATE_UP)) + if (!mlx5_modify_vport_admin_state(priv->mdev, + MLX5_QUERY_VPORT_STATE_IN_OP_MOD_ESW_VPORT, + rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_UP)) netif_carrier_on(dev); unlock: @@ -690,11 +690,12 @@ static int mlx5e_rep_close(struct net_device *dev) struct mlx5e_priv *priv = netdev_priv(dev); struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep = rpriv->rep; - struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; int ret; mutex_lock(&priv->state_lock); - (void)mlx5_eswitch_set_vport_state(esw, rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_DOWN); + mlx5_modify_vport_admin_state(priv->mdev, + MLX5_QUERY_VPORT_STATE_IN_OP_MOD_ESW_VPORT, + rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_DOWN); ret = mlx5e_close_locked(dev); mutex_unlock(&priv->state_lock); return ret; -- cgit v1.2.3 From 5ecadff0b6cfb52ba5d1bd07c6372acea5418c39 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 13 Feb 2018 13:43:39 +0200 Subject: net/mlx5e: Use 32 bits to store VF representor SQ number SQs are 32 and not 16 bits, hence it's wrong to use only 16 bits to store the sq number for which are going to set steering rule, fix that. Fixes: cb67b832921c ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by: Or Gerlitz Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 0273c233bc85..738554a6c69f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -209,7 +209,7 @@ static void mlx5e_sqs2vport_stop(struct mlx5_eswitch *esw, static int mlx5e_sqs2vport_start(struct mlx5_eswitch *esw, struct mlx5_eswitch_rep *rep, - u16 *sqns_array, int sqns_num) + u32 *sqns_array, int sqns_num) { struct mlx5_flow_handle *flow_rule; struct mlx5e_rep_priv *rpriv; @@ -255,9 +255,9 @@ int mlx5e_add_sqs_fwd_rules(struct mlx5e_priv *priv) struct mlx5e_channel *c; int n, tc, num_sqs = 0; int err = -ENOMEM; - u16 *sqs; + u32 *sqs; - sqs = kcalloc(priv->channels.num * priv->channels.params.num_tc, sizeof(u16), GFP_KERNEL); + sqs = kcalloc(priv->channels.num * priv->channels.params.num_tc, sizeof(*sqs), GFP_KERNEL); if (!sqs) goto out; -- cgit v1.2.3 From f125376b06bcc57dfb0216ac8d6ec6d5dcf81025 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 15 Feb 2018 12:39:55 +0200 Subject: net/mlx5: Make eswitch support to depend on switchdev Add dependancy for switchdev to be congfigured as any user-space control plane SW is expected to use the HW switchdev ID to locate the representors related to VFs of a certain PF and apply SW/offloaded switching on them. Fixes: e80541ecabd5 ('net/mlx5: Add CONFIG_MLX5_ESWITCH Kconfig') Signed-off-by: Or Gerlitz Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 -- 3 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index 25deaa5a534c..c032319f1cb9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -46,7 +46,7 @@ config MLX5_MPFS config MLX5_ESWITCH bool "Mellanox Technologies MLX5 SRIOV E-Switch support" - depends on MLX5_CORE_EN + depends on MLX5_CORE_EN && NET_SWITCHDEV default y ---help--- Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC. diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index da94c8cba5ee..e35859657217 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4069,7 +4069,7 @@ static void mlx5e_set_netdev_dev_addr(struct net_device *netdev) } } -#if IS_ENABLED(CONFIG_NET_SWITCHDEV) && IS_ENABLED(CONFIG_MLX5_ESWITCH) +#if IS_ENABLED(CONFIG_MLX5_ESWITCH) static const struct switchdev_ops mlx5e_switchdev_ops = { .switchdev_port_attr_get = mlx5e_attr_get, }; @@ -4175,7 +4175,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev) mlx5e_set_netdev_dev_addr(netdev); -#if IS_ENABLED(CONFIG_NET_SWITCHDEV) && IS_ENABLED(CONFIG_MLX5_ESWITCH) +#if IS_ENABLED(CONFIG_MLX5_ESWITCH) if (MLX5_VPORT_MANAGER(mdev)) netdev->switchdev_ops = &mlx5e_switchdev_ops; #endif diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 738554a6c69f..5ece289548ad 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -900,9 +900,7 @@ static void mlx5e_build_rep_netdev(struct net_device *netdev) netdev->ethtool_ops = &mlx5e_rep_ethtool_ops; -#ifdef CONFIG_NET_SWITCHDEV netdev->switchdev_ops = &mlx5e_rep_switchdev_ops; -#endif netdev->features |= NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_TC | NETIF_F_NETNS_LOCAL; netdev->hw_features |= NETIF_F_HW_TC; -- cgit v1.2.3 From b392a2078b5e0094ff38aa0c9d2a31b3f607d4ef Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Thu, 15 Feb 2018 12:41:48 +0200 Subject: net/mlx5e: Verify coalescing parameters in range Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx5 modify cq limits the coalescing time parameter to 12 bit and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index cc8048f68f11..59ebfdae6695 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -477,6 +477,9 @@ static int mlx5e_get_coalesce(struct net_device *netdev, return mlx5e_ethtool_get_coalesce(priv, coal); } +#define MLX5E_MAX_COAL_TIME MLX5_MAX_CQ_PERIOD +#define MLX5E_MAX_COAL_FRAMES MLX5_MAX_CQ_COUNT + static void mlx5e_set_priv_channels_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal) { @@ -511,6 +514,20 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv, if (!MLX5_CAP_GEN(mdev, cq_moderation)) return -EOPNOTSUPP; + if (coal->tx_coalesce_usecs > MLX5E_MAX_COAL_TIME || + coal->rx_coalesce_usecs > MLX5E_MAX_COAL_TIME) { + netdev_info(priv->netdev, "%s: maximum coalesce time supported is %lu usecs\n", + __func__, MLX5E_MAX_COAL_TIME); + return -ERANGE; + } + + if (coal->tx_max_coalesced_frames > MLX5E_MAX_COAL_FRAMES || + coal->rx_max_coalesced_frames > MLX5E_MAX_COAL_FRAMES) { + netdev_info(priv->netdev, "%s: maximum coalesced frames supported is %lu\n", + __func__, MLX5E_MAX_COAL_FRAMES); + return -ERANGE; + } + mutex_lock(&priv->state_lock); new_channels.params = priv->channels.params; -- cgit v1.2.3 From 4246f698dd58e3c6246fa919ef0b0a1d29a57e4a Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Wed, 28 Feb 2018 12:56:42 +0200 Subject: net/mlx5e: Fix traffic being dropped on VF representor Increase representor netdev RQ size to avoid dropped packets. The current size (two) is just too small to keep up with conventional slow path traffic patterns. Also match the SQ size to the RQ size. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Roi Dayan Reviewed-by: Paul Blakey Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 5ece289548ad..9a5a2a7eeab3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -44,6 +44,11 @@ #include "en_tc.h" #include "fs_core.h" +#define MLX5E_REP_PARAMS_LOG_SQ_SIZE \ + max(0x6, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE) +#define MLX5E_REP_PARAMS_LOG_RQ_SIZE \ + max(0x6, MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE) + static const char mlx5e_rep_driver_name[] = "mlx5e_rep"; static void mlx5e_rep_get_drvinfo(struct net_device *dev, @@ -878,9 +883,9 @@ static void mlx5e_build_rep_params(struct mlx5_core_dev *mdev, MLX5_CQ_PERIOD_MODE_START_FROM_CQE : MLX5_CQ_PERIOD_MODE_START_FROM_EQE; - params->log_sq_size = MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE; + params->log_sq_size = MLX5E_REP_PARAMS_LOG_SQ_SIZE; params->rq_wq_type = MLX5_WQ_TYPE_LINKED_LIST; - params->log_rq_size = MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE; + params->log_rq_size = MLX5E_REP_PARAMS_LOG_RQ_SIZE; params->rx_dim_enabled = MLX5_CAP_GEN(mdev, cq_moderation); mlx5e_set_rx_cq_mode_params(params, cq_period_mode); -- cgit v1.2.3 From af1607c37d9d85a66fbcf43b7f11bf3d94b9bb69 Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Thu, 8 Mar 2018 09:20:55 +0000 Subject: net/mlx5e: Fix memory usage issues in offloading TC flows For NIC flows, the parsed attributes are not freed when we exit successfully from mlx5e_configure_flower(). There is possible double free for eswitch flows. If error is returned from rhashtable_insert_fast(), the parse attrs will be freed in mlx5e_tc_del_flow(), but they will be freed again before exiting mlx5e_configure_flower(). To fix both issues we do the following: (1) change the condition that determines if to issue the free call to check if this flow is NIC flow, or it does not have encap action. (2) reorder the code such that that the check and free calls are done before we attempt to add into the hash table. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Jianbo Liu Reviewed-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index fa86a1466718..ae11678a31e8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -2608,19 +2608,19 @@ int mlx5e_configure_flower(struct mlx5e_priv *priv, if (err != -EAGAIN) flow->flags |= MLX5E_TC_FLOW_OFFLOADED; + if (!(flow->flags & MLX5E_TC_FLOW_ESWITCH) || + !(flow->esw_attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP)) + kvfree(parse_attr); + err = rhashtable_insert_fast(&tc->ht, &flow->node, tc->ht_params); - if (err) - goto err_del_rule; + if (err) { + mlx5e_tc_del_flow(priv, flow); + kfree(flow); + } - if (flow->flags & MLX5E_TC_FLOW_ESWITCH && - !(flow->esw_attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP)) - kvfree(parse_attr); return err; -err_del_rule: - mlx5e_tc_del_flow(priv, flow); - err_free: kvfree(parse_attr); kfree(flow); -- cgit v1.2.3 From 423c9db29943cfc43e3a408192e9efa4178af6a1 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 13 Mar 2018 21:43:43 +0200 Subject: net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update path Currently we use the global ipv6_stub var to access the ipv6 global nd table. This practice gets us to troubles when the stub is only partially set e.g when ipv6 is loaded under the disabled policy. In this case, as of commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument") the stub is not null, but stub->nd_tbl is and we crash. As we can access the ipv6 nd_tbl directly, the fix is just to avoid the reference through the stub. There is one place in the code where we issue ipv6 route lookup and keep doing it through the stub, but that mentioned commit makes sure we get -EAFNOSUPPORT from the stack. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Or Gerlitz Reviewed-by: Aviv Heller Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 6 +++--- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 9a5a2a7eeab3..500d817d2b0a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -293,7 +293,7 @@ void mlx5e_remove_sqs_fwd_rules(struct mlx5e_priv *priv) static void mlx5e_rep_neigh_update_init_interval(struct mlx5e_rep_priv *rpriv) { #if IS_ENABLED(CONFIG_IPV6) - unsigned long ipv6_interval = NEIGH_VAR(&ipv6_stub->nd_tbl->parms, + unsigned long ipv6_interval = NEIGH_VAR(&nd_tbl.parms, DELAY_PROBE_TIME); #else unsigned long ipv6_interval = ~0UL; @@ -429,7 +429,7 @@ static int mlx5e_rep_netevent_event(struct notifier_block *nb, case NETEVENT_NEIGH_UPDATE: n = ptr; #if IS_ENABLED(CONFIG_IPV6) - if (n->tbl != ipv6_stub->nd_tbl && n->tbl != &arp_tbl) + if (n->tbl != &nd_tbl && n->tbl != &arp_tbl) #else if (n->tbl != &arp_tbl) #endif @@ -477,7 +477,7 @@ static int mlx5e_rep_netevent_event(struct notifier_block *nb, * done per device delay prob time parameter. */ #if IS_ENABLED(CONFIG_IPV6) - if (!p->dev || (p->tbl != ipv6_stub->nd_tbl && p->tbl != &arp_tbl)) + if (!p->dev || (p->tbl != &nd_tbl && p->tbl != &arp_tbl)) #else if (!p->dev || p->tbl != &arp_tbl) #endif diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index ae11678a31e8..43234cabf444 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -963,7 +963,7 @@ void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe) tbl = &arp_tbl; #if IS_ENABLED(CONFIG_IPV6) else if (m_neigh->family == AF_INET6) - tbl = ipv6_stub->nd_tbl; + tbl = &nd_tbl; #endif else return; -- cgit v1.2.3 From a117f73dc2430443f23e18367fa545981129c1a6 Mon Sep 17 00:00:00 2001 From: Shahar Klein Date: Tue, 20 Mar 2018 14:44:40 +0200 Subject: net/mlx5e: Sync netdev vxlan ports at open When mlx5_core is loaded it is expected to sync ports with all vxlan devices so it can support vxlan encap/decap. This is done via udp_tunnel_get_rx_info(). Currently this call is set in mlx5e_nic_enable() and if the netdev is not in NETREG_REGISTERED state it will not be called. Normally on load the netdev state is not NETREG_REGISTERED so udp_tunnel_get_rx_info() will not be called. Moving udp_tunnel_get_rx_info() to mlx5e_open() so it will be called on netdev UP event and allow encap/decap. Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered") Signed-off-by: Shahar Klein Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index e35859657217..9b4827d36e3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2572,6 +2572,9 @@ int mlx5e_open(struct net_device *netdev) mlx5_set_port_admin_status(priv->mdev, MLX5_PORT_UP); mutex_unlock(&priv->state_lock); + if (mlx5e_vxlan_allowed(priv->mdev)) + udp_tunnel_get_rx_info(netdev); + return err; } @@ -4327,12 +4330,6 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv) #ifdef CONFIG_MLX5_CORE_EN_DCB mlx5e_dcbnl_init_app(priv); #endif - /* Device already registered: sync netdev system state */ - if (mlx5e_vxlan_allowed(mdev)) { - rtnl_lock(); - udp_tunnel_get_rx_info(netdev); - rtnl_unlock(); - } queue_work(priv->wq, &priv->set_rx_mode_work); -- cgit v1.2.3 From 5607dddbfca774fb38bffadcb077fe03aa4ac5c6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 27 Mar 2018 16:07:52 +0300 Subject: ALSA: pcm: potential uninitialized return values Smatch complains that "tmp" can be uninitialized if we do a zero size write. Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") Signed-off-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai --- sound/core/oss/pcm_oss.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 02298c9c6020..441405081195 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1326,7 +1326,7 @@ static ssize_t snd_pcm_oss_write2(struct snd_pcm_substream *substream, const cha static ssize_t snd_pcm_oss_write1(struct snd_pcm_substream *substream, const char __user *buf, size_t bytes) { size_t xfer = 0; - ssize_t tmp; + ssize_t tmp = 0; struct snd_pcm_runtime *runtime = substream->runtime; if (atomic_read(&substream->mmap_count)) @@ -1433,7 +1433,7 @@ static ssize_t snd_pcm_oss_read2(struct snd_pcm_substream *substream, char *buf, static ssize_t snd_pcm_oss_read1(struct snd_pcm_substream *substream, char __user *buf, size_t bytes) { size_t xfer = 0; - ssize_t tmp; + ssize_t tmp = 0; struct snd_pcm_runtime *runtime = substream->runtime; if (atomic_read(&substream->mmap_count)) -- cgit v1.2.3 From d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 Mon Sep 17 00:00:00 2001 From: Giuseppe Lippolis Date: Mon, 26 Mar 2018 16:34:39 +0200 Subject: net-usb: add qmi_wwan if on lte modem wistron neweb d18q1 This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Giuseppe Lippolis Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2508ab08fc5a..ca066b785e9f 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1104,6 +1104,9 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x0846, 0x68a2, 8)}, {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 3)}, /* Wistron NeWeb D18Q1 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */ {QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */ {QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */ {QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */ -- cgit v1.2.3 From 1dfe82ebd7d8fd43dba9948fdfb31f145014baa0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 26 Mar 2018 08:08:07 -0700 Subject: net: fix possible out-of-bound read in skb_network_protocol() skb mac header is not necessarily set at the time skb_network_protocol() is called. Use skb->data instead. BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242 CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 harmonize_features net/core/dev.c:2924 [inline] netif_skb_features+0x509/0x9b0 net/core/dev.c:3011 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047 __sys_sendmsg+0xe5/0x210 net/socket.c:2081 Fixes: 19acc327258a ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()") Signed-off-by: Eric Dumazet Cc: Pravin B Shelar Reported-by: Reported-by: syzbot Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 12be20535714..ef0cc6ea5f8d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2735,7 +2735,7 @@ __be16 skb_network_protocol(struct sk_buff *skb, int *depth) if (unlikely(!pskb_may_pull(skb, sizeof(struct ethhdr)))) return 0; - eth = (struct ethhdr *)skb_mac_header(skb); + eth = (struct ethhdr *)skb->data; type = eth->h_proto; } -- cgit v1.2.3 From 19c9ea363a244f85f90a424f9936e6d56449e33c Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 26 Mar 2018 19:19:30 +0200 Subject: r8169: fix setting driver_data after register_netdev pci_set_drvdata() is called only after registering the net_device, therefore we could run into a NPE if one of the functions using driver_data is called before it's set. Fix this by calling pci_set_drvdata() before registering the net_device. This fix is a candidate for stable. As far as I can see the bug has been there in kernel version 3.2 already, therefore I can't provide a reference which commit is fixed by it. The fix may need small adjustments per kernel version because due to other changes the label which is jumped to if register_netdev() fails has changed over time. Reported-by: David Miller Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 0bf7d1759250..b4779acb6b5c 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -8660,12 +8660,12 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!tp->counters) return -ENOMEM; + pci_set_drvdata(pdev, dev); + rc = register_netdev(dev); if (rc < 0) return rc; - pci_set_drvdata(pdev, dev); - netif_info(tp, probe, dev, "%s at 0x%p, %pM, XID %08x IRQ %d\n", rtl_chip_infos[chipset].name, ioaddr, dev->dev_addr, (u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), pdev->irq); -- cgit v1.2.3 From 734549eb550c0c720bc89e50501f1b1e98cdd841 Mon Sep 17 00:00:00 2001 From: Craig Dillabaugh Date: Mon, 26 Mar 2018 14:58:32 -0400 Subject: net sched actions: fix dumping which requires several messages to user space Fixes a bug in the tcf_dump_walker function that can cause some actions to not be reported when dumping a large number of actions. This issue became more aggrevated when cookies feature was added. In particular this issue is manifest when large cookie values are assigned to the actions and when enough actions are created that the resulting table must be dumped in multiple batches. The number of actions returned in each batch is limited by the total number of actions and the memory buffer size. With small cookies the numeric limit is reached before the buffer size limit, which avoids the code path triggering this bug. When large cookies are used buffer fills before the numeric limit, and the erroneous code path is hit. For example after creating 32 csum actions with the cookie aaaabbbbccccdddd $ tc actions ls action csum total acts 26 action order 0: csum (tcp) action continue index 1 ref 1 bind 0 cookie aaaabbbbccccdddd ..... action order 25: csum (tcp) action continue index 26 ref 1 bind 0 cookie aaaabbbbccccdddd total acts 6 action order 0: csum (tcp) action continue index 28 ref 1 bind 0 cookie aaaabbbbccccdddd ...... action order 5: csum (tcp) action continue index 32 ref 1 bind 0 cookie aaaabbbbccccdddd Note that the action with index 27 is omitted from the report. Fixes: 4b3550ef530c ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")" Signed-off-by: Craig Dillabaugh Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/sched/act_api.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/sched/act_api.c b/net/sched/act_api.c index eba6682727dd..efc6bfb9a4e0 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -135,8 +135,10 @@ static int tcf_dump_walker(struct tcf_idrinfo *idrinfo, struct sk_buff *skb, continue; nest = nla_nest_start(skb, n_i); - if (!nest) + if (!nest) { + index--; goto nla_put_failure; + } err = tcf_action_dump_1(skb, p, 0, 0); if (err < 0) { index--; -- cgit v1.2.3 From cd00edc179863848abab5cc5683de5b7b5f70954 Mon Sep 17 00:00:00 2001 From: Dave Watson Date: Mon, 26 Mar 2018 12:31:21 -0700 Subject: strparser: Fix sign of err codes strp_parser_err is called with a negative code everywhere, which then calls abort_parser with a negative code. strp_msg_timeout calls abort_parser directly with a positive code. Negate ETIMEDOUT to match signed-ness of other calls. The default abort_parser callback, strp_abort_strp, sets sk->sk_err to err. Also negate the error here so sk_err always holds a positive value, as the rest of the net code expects. Currently a negative sk_err can result in endless loops, or user code that thinks it actually sent/received err bytes. Found while testing net/tls_sw recv path. Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Signed-off-by: Dave Watson Signed-off-by: David S. Miller --- net/strparser/strparser.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/strparser/strparser.c b/net/strparser/strparser.c index 1fdab5c4eda8..b9283ce5cd85 100644 --- a/net/strparser/strparser.c +++ b/net/strparser/strparser.c @@ -60,7 +60,7 @@ static void strp_abort_strp(struct strparser *strp, int err) struct sock *sk = strp->sk; /* Report an error on the lower socket */ - sk->sk_err = err; + sk->sk_err = -err; sk->sk_error_report(sk); } } @@ -458,7 +458,7 @@ static void strp_msg_timeout(struct work_struct *w) /* Message assembly timed out */ STRP_STATS_INCR(strp->stats.msg_timeouts); strp->cb.lock(strp); - strp->cb.abort_parser(strp, ETIMEDOUT); + strp->cb.abort_parser(strp, -ETIMEDOUT); strp->cb.unlock(strp); } -- cgit v1.2.3 From b85ab56c3f81c5a24b5a5213374f549df06430da Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 26 Mar 2018 15:08:33 -0700 Subject: llc: properly handle dev_queue_xmit() return value llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by: Noam Rathaus Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/net/llc_conn.h | 2 +- net/llc/llc_c_ac.c | 15 +++++++++------ net/llc/llc_conn.c | 32 +++++++++++++++++++++++--------- 3 files changed, 33 insertions(+), 16 deletions(-) diff --git a/include/net/llc_conn.h b/include/net/llc_conn.h index fe994d2e5286..5c40f118c0fa 100644 --- a/include/net/llc_conn.h +++ b/include/net/llc_conn.h @@ -103,7 +103,7 @@ void llc_sk_reset(struct sock *sk); /* Access to a connection */ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb); -void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb); +int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb); void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb); void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit); void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit); diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c index f59648018060..163121192aca 100644 --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -389,7 +389,7 @@ static int llc_conn_ac_send_i_cmd_p_set_0(struct sock *sk, struct sk_buff *skb) llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR); rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac); if (likely(!rc)) { - llc_conn_send_pdu(sk, skb); + rc = llc_conn_send_pdu(sk, skb); llc_conn_ac_inc_vs_by_1(sk, skb); } return rc; @@ -916,7 +916,7 @@ static int llc_conn_ac_send_i_rsp_f_set_ackpf(struct sock *sk, llc_pdu_init_as_i_cmd(skb, llc->ack_pf, llc->vS, llc->vR); rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac); if (likely(!rc)) { - llc_conn_send_pdu(sk, skb); + rc = llc_conn_send_pdu(sk, skb); llc_conn_ac_inc_vs_by_1(sk, skb); } return rc; @@ -935,14 +935,17 @@ static int llc_conn_ac_send_i_rsp_f_set_ackpf(struct sock *sk, int llc_conn_ac_send_i_as_ack(struct sock *sk, struct sk_buff *skb) { struct llc_sock *llc = llc_sk(sk); + int ret; if (llc->ack_must_be_send) { - llc_conn_ac_send_i_rsp_f_set_ackpf(sk, skb); + ret = llc_conn_ac_send_i_rsp_f_set_ackpf(sk, skb); llc->ack_must_be_send = 0 ; llc->ack_pf = 0; - } else - llc_conn_ac_send_i_cmd_p_set_0(sk, skb); - return 0; + } else { + ret = llc_conn_ac_send_i_cmd_p_set_0(sk, skb); + } + + return ret; } /** diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c index 9177dbb16dce..110e32bcb399 100644 --- a/net/llc/llc_conn.c +++ b/net/llc/llc_conn.c @@ -30,7 +30,7 @@ #endif static int llc_find_offset(int state, int ev_type); -static void llc_conn_send_pdus(struct sock *sk); +static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *skb); static int llc_conn_service(struct sock *sk, struct sk_buff *skb); static int llc_exec_conn_trans_actions(struct sock *sk, struct llc_conn_state_trans *trans, @@ -193,11 +193,11 @@ out_skb_put: return rc; } -void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb) +int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb) { /* queue PDU to send to MAC layer */ skb_queue_tail(&sk->sk_write_queue, skb); - llc_conn_send_pdus(sk); + return llc_conn_send_pdus(sk, skb); } /** @@ -255,7 +255,7 @@ void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit) if (howmany_resend > 0) llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO; /* any PDUs to re-send are queued up; start sending to MAC */ - llc_conn_send_pdus(sk); + llc_conn_send_pdus(sk, NULL); out:; } @@ -296,7 +296,7 @@ void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit) if (howmany_resend > 0) llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO; /* any PDUs to re-send are queued up; start sending to MAC */ - llc_conn_send_pdus(sk); + llc_conn_send_pdus(sk, NULL); out:; } @@ -340,12 +340,16 @@ out: /** * llc_conn_send_pdus - Sends queued PDUs * @sk: active connection + * @hold_skb: the skb held by caller, or NULL if does not care * - * Sends queued pdus to MAC layer for transmission. + * Sends queued pdus to MAC layer for transmission. When @hold_skb is + * NULL, always return 0. Otherwise, return 0 if @hold_skb is sent + * successfully, or 1 for failure. */ -static void llc_conn_send_pdus(struct sock *sk) +static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb) { struct sk_buff *skb; + int ret = 0; while ((skb = skb_dequeue(&sk->sk_write_queue)) != NULL) { struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb); @@ -357,10 +361,20 @@ static void llc_conn_send_pdus(struct sock *sk) skb_queue_tail(&llc_sk(sk)->pdu_unack_q, skb); if (!skb2) break; - skb = skb2; + dev_queue_xmit(skb2); + } else { + bool is_target = skb == hold_skb; + int rc; + + if (is_target) + skb_get(skb); + rc = dev_queue_xmit(skb); + if (is_target) + ret = rc; } - dev_queue_xmit(skb); } + + return ret; } /** -- cgit v1.2.3 From ab6f6dd18ab801fcbbaa05fb5401e91f48778e04 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 27 Mar 2018 10:43:50 +0200 Subject: net/smc: use announced length in sock_recvmsg() Not every CLC proposal message needs the maximum buffer length. Due to the MSG_WAITALL flag, it is important to use the peeked real length when receiving the message. Fixes: d63d271ce2b5ce ("smc: switch to sock_recvmsg()") Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_clc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index 8ac51583a063..15c213250606 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -133,7 +133,7 @@ int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen, /* receive the complete CLC message */ memset(&msg, 0, sizeof(struct msghdr)); - iov_iter_kvec(&msg.msg_iter, READ | ITER_KVEC, &vec, 1, buflen); + iov_iter_kvec(&msg.msg_iter, READ | ITER_KVEC, &vec, 1, datlen); krflags = MSG_WAITALL; smc->clcsock->sk->sk_rcvtimeo = CLC_WAIT_TIME; len = sock_recvmsg(smc->clcsock, &msg, krflags); -- cgit v1.2.3 From 6e8814ceb7e8f468659ef9253bd212c07ae19584 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 27 Mar 2018 14:41:18 +0300 Subject: net/mlx4_en: Fix mixed PFC and Global pause user control requests Global pause and PFC configuration should be mutually exclusive (i.e. only one of them at most can be set). However, once PFC was turned off, driver automatically turned Global pause on. This is a bug. Fix the driver behaviour to turn off PFC/Global once the user turned the other on. This also fixed a weird behaviour that at a current time, the profile had both PFC and global pause configuration turned on, which is Hardware-wise impossible and caused returning false positive indication to query tools. In addition, fix error code when setting global pause or PFC to change metadata only upon successful change. Also, removed useless debug print. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 72 ++++++++++++++----------- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 33 +++++++----- drivers/net/ethernet/mellanox/mlx4/en_main.c | 4 +- 3 files changed, 62 insertions(+), 47 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 1a0c3bf86ead..752a72499b4f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -156,57 +156,63 @@ static int mlx4_en_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) { struct mlx4_en_priv *priv = netdev_priv(netdev); + struct mlx4_en_port_profile *prof = priv->prof; struct mlx4_en_dev *mdev = priv->mdev; + u8 tx_pause, tx_ppp, rx_pause, rx_ppp; if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 1; if (priv->cee_config.pfc_state) { int tc; + rx_ppp = prof->rx_ppp; + tx_ppp = prof->tx_ppp; - priv->prof->rx_pause = 0; - priv->prof->tx_pause = 0; for (tc = 0; tc < CEE_DCBX_MAX_PRIO; tc++) { u8 tc_mask = 1 << tc; switch (priv->cee_config.dcb_pfc[tc]) { case pfc_disabled: - priv->prof->tx_ppp &= ~tc_mask; - priv->prof->rx_ppp &= ~tc_mask; + tx_ppp &= ~tc_mask; + rx_ppp &= ~tc_mask; break; case pfc_enabled_full: - priv->prof->tx_ppp |= tc_mask; - priv->prof->rx_ppp |= tc_mask; + tx_ppp |= tc_mask; + rx_ppp |= tc_mask; break; case pfc_enabled_tx: - priv->prof->tx_ppp |= tc_mask; - priv->prof->rx_ppp &= ~tc_mask; + tx_ppp |= tc_mask; + rx_ppp &= ~tc_mask; break; case pfc_enabled_rx: - priv->prof->tx_ppp &= ~tc_mask; - priv->prof->rx_ppp |= tc_mask; + tx_ppp &= ~tc_mask; + rx_ppp |= tc_mask; break; default: break; } } - en_dbg(DRV, priv, "Set pfc on\n"); + rx_pause = !!(rx_ppp || tx_ppp) ? 0 : prof->rx_pause; + tx_pause = !!(rx_ppp || tx_ppp) ? 0 : prof->tx_pause; } else { - priv->prof->rx_pause = 1; - priv->prof->tx_pause = 1; - en_dbg(DRV, priv, "Set pfc off\n"); + rx_ppp = 0; + tx_ppp = 0; + rx_pause = prof->rx_pause; + tx_pause = prof->tx_pause; } if (mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - priv->prof->tx_pause, - priv->prof->tx_ppp, - priv->prof->rx_pause, - priv->prof->rx_ppp)) { + tx_pause, tx_ppp, rx_pause, rx_ppp)) { en_err(priv, "Failed setting pause params\n"); return 1; } + prof->tx_ppp = tx_ppp; + prof->rx_ppp = rx_ppp; + prof->tx_pause = tx_pause; + prof->rx_pause = rx_pause; + return 0; } @@ -408,6 +414,7 @@ static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev, struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_port_profile *prof = priv->prof; struct mlx4_en_dev *mdev = priv->mdev; + u32 tx_pause, tx_ppp, rx_pause, rx_ppp; int err; en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n", @@ -416,23 +423,26 @@ static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev, pfc->mbc, pfc->delay); - prof->rx_pause = !pfc->pfc_en; - prof->tx_pause = !pfc->pfc_en; - prof->rx_ppp = pfc->pfc_en; - prof->tx_ppp = pfc->pfc_en; + rx_pause = prof->rx_pause && !pfc->pfc_en; + tx_pause = prof->tx_pause && !pfc->pfc_en; + rx_ppp = pfc->pfc_en; + tx_ppp = pfc->pfc_en; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - prof->tx_pause, - prof->tx_ppp, - prof->rx_pause, - prof->rx_ppp); - if (err) + tx_pause, tx_ppp, rx_pause, rx_ppp); + if (err) { en_err(priv, "Failed setting pause params\n"); - else - mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, - prof->rx_ppp, prof->rx_pause, - prof->tx_ppp, prof->tx_pause); + return err; + } + + mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, + rx_ppp, rx_pause, tx_ppp, tx_pause); + + prof->tx_ppp = tx_ppp; + prof->rx_ppp = rx_ppp; + prof->rx_pause = rx_pause; + prof->tx_pause = tx_pause; return err; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index ebc1f566a4d9..f3302edba8b4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -1046,27 +1046,32 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + u8 tx_pause, tx_ppp, rx_pause, rx_ppp; int err; if (pause->autoneg) return -EINVAL; - priv->prof->tx_pause = pause->tx_pause != 0; - priv->prof->rx_pause = pause->rx_pause != 0; + tx_pause = !!(pause->tx_pause); + rx_pause = !!(pause->rx_pause); + rx_ppp = priv->prof->rx_ppp && !(tx_pause || rx_pause); + tx_ppp = priv->prof->tx_ppp && !(tx_pause || rx_pause); + err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - priv->prof->tx_pause, - priv->prof->tx_ppp, - priv->prof->rx_pause, - priv->prof->rx_ppp); - if (err) - en_err(priv, "Failed setting pause params\n"); - else - mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, - priv->prof->rx_ppp, - priv->prof->rx_pause, - priv->prof->tx_ppp, - priv->prof->tx_pause); + tx_pause, tx_ppp, rx_pause, rx_ppp); + if (err) { + en_err(priv, "Failed setting pause params, err = %d\n", err); + return err; + } + + mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, + rx_ppp, rx_pause, tx_ppp, tx_pause); + + priv->prof->tx_pause = tx_pause; + priv->prof->rx_pause = rx_pause; + priv->prof->tx_ppp = tx_ppp; + priv->prof->rx_ppp = rx_ppp; return err; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index 2c2965497ed3..d25e16d2c319 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -163,9 +163,9 @@ static void mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->udp_rss = 0; } for (i = 1; i <= MLX4_MAX_PORTS; i++) { - params->prof[i].rx_pause = 1; + params->prof[i].rx_pause = !(pfcrx || pfctx); params->prof[i].rx_ppp = pfcrx; - params->prof[i].tx_pause = 1; + params->prof[i].tx_pause = !(pfcrx || pfctx); params->prof[i].tx_ppp = pfctx; params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE; params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE; -- cgit v1.2.3 From 461d5f1b59490ce0096dfda45e10038c122a7892 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Tue, 27 Mar 2018 14:41:19 +0300 Subject: net/mlx4_core: Fix memory leak while delete slave's resources mlx4_delete_all_resources_for_slave in resource tracker should free all memory allocated for a slave. While releasing memory of fs_rule, it misses releasing memory of fs_rule->mirr_mbox. Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports') Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 606a0e0beeae..29e50f787349 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -5088,6 +5088,7 @@ static void rem_slave_fs_rule(struct mlx4_dev *dev, int slave) &tracker->res_tree[RES_FS_RULE]); list_del(&fs_rule->com.list); spin_unlock_irq(mlx4_tlock(dev)); + kfree(fs_rule->mirr_mbox); kfree(fs_rule); state = 0; break; -- cgit v1.2.3 From f8437520704cfd9cc442a99d73ed708a3cdadaf9 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Wed, 21 Mar 2018 13:15:28 +0800 Subject: builddeb: Fix header package regarding dtc source links Since d5d332d3f7e8, a couple of links in scripts/dtc/include-prefixes are additionally required in order to build device trees with the header package. Signed-off-by: Jan Kiszka Reviewed-by: Riku Voipio Signed-off-by: Masahiro Yamada --- scripts/package/builddeb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index b4f0f2b3f8d2..13fabb1f81db 100755 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -313,7 +313,7 @@ fi # Build kernel header package (cd $srctree; find . -name Makefile\* -o -name Kconfig\* -o -name \*.pl) > "$objtree/debian/hdrsrcfiles" -(cd $srctree; find arch/*/include include scripts -type f) >> "$objtree/debian/hdrsrcfiles" +(cd $srctree; find arch/*/include include scripts -type f -o -type l) >> "$objtree/debian/hdrsrcfiles" (cd $srctree; find arch/$SRCARCH -name module.lds -o -name Kbuild.platforms -o -name Platform) >> "$objtree/debian/hdrsrcfiles" (cd $srctree; find $(find arch/$SRCARCH -name include -o -name scripts -type d) -type f) >> "$objtree/debian/hdrsrcfiles" if grep -q '^CONFIG_STACK_VALIDATION=y' $KCONFIG_CONFIG ; then -- cgit v1.2.3 From 8a6105c4818cdc4a5c6b8a99c98ab7cc43be1ba8 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Fri, 23 Mar 2018 11:59:36 -0600 Subject: kbuild: rpm-pkg: Support GNU tar >= 1.29 There is a change in how command line parsing is done in this version. Excludes and includes are now ordered with the file list. Since the spec file puts the file list before the exclude list it means newer tar ignores the excludes and packs all the build output into the kernel-devel RPM resulting in a huge package. Simple argument re-ordering fixes the problem. Signed-off-by: Jason Gunthorpe Signed-off-by: Masahiro Yamada --- scripts/package/mkspec | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/mkspec b/scripts/package/mkspec index 280027fad991..61427c6f2209 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -98,7 +98,7 @@ $M make %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} KBUILD_SRC= modules_instal $S$M rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build $S$M rm -f %{buildroot}/lib/modules/$KERNELRELEASE/source $S$M mkdir -p %{buildroot}/usr/src/kernels/$KERNELRELEASE -$S$M tar cf - . $EXCLUDES | tar xf - -C %{buildroot}/usr/src/kernels/$KERNELRELEASE +$S$M tar cf - $EXCLUDES . | tar xf - -C %{buildroot}/usr/src/kernels/$KERNELRELEASE $S$M cd %{buildroot}/lib/modules/$KERNELRELEASE $S$M ln -sf /usr/src/kernels/$KERNELRELEASE build $S$M ln -sf /usr/src/kernels/$KERNELRELEASE source -- cgit v1.2.3 From dc6455a71c7fc5117977e197f67f71b49f27baba Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 27 Mar 2018 20:50:52 +0800 Subject: vhost: correctly remove wait queue during poll failure We tried to remove vq poll from wait queue, but do not check whether or not it was in a list before. This will lead double free. Fixing this by switching to use vhost_poll_stop() which zeros poll->wqh after removing poll from waitqueue to make sure it won't be freed twice. Cc: Darren Kenny Reported-by: syzbot+c0272972b01b872e604a@syzkaller.appspotmail.com Fixes: 2b8b328b61c79 ("vhost_net: handle polling errors when setting backend") Signed-off-by: Jason Wang Reviewed-by: Darren Kenny Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/vhost.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 1b3e8d2d5c8b..5d5a9d9e66d3 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -212,8 +212,7 @@ int vhost_poll_start(struct vhost_poll *poll, struct file *file) if (mask) vhost_poll_wakeup(&poll->wait, 0, 0, poll_to_key(mask)); if (mask & EPOLLERR) { - if (poll->wqh) - remove_wait_queue(poll->wqh, &poll->wait); + vhost_poll_stop(poll); ret = -EINVAL; } -- cgit v1.2.3 From b9fc828debc8ac2bb21b5819a44d2aea456f1c95 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Tue, 27 Mar 2018 06:34:41 -0700 Subject: qede: Fix barrier usage after tx doorbell write. Since commit c5ad119fb6c09b0297446be05bd66602fa564758 ("net: sched: pfifo_fast use skb_array") driver is exposed to an issue where it is hitting NULL skbs while handling TX completions. Driver uses mmiowb() to flush the writes to the doorbell bar which is a write-combined bar, however on x86 mmiowb() does not flush the write combined buffer. This patch fixes this problem by replacing mmiowb() with wmb() after the write combined doorbell write so that writes are flushed and synchronized from more than one processor. V1->V2: ------- This patch was marked as "superseded" in patchwork. (Not really sure for what reason).Resending it as v2. Signed-off-by: Ariel Elior Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_fp.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c index dafc079ab6b9..2e921cab1792 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_fp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c @@ -320,13 +320,11 @@ static inline void qede_update_tx_producer(struct qede_tx_queue *txq) barrier(); writel(txq->tx_db.raw, txq->doorbell_addr); - /* mmiowb is needed to synchronize doorbell writes from more than one - * processor. It guarantees that the write arrives to the device before - * the queue lock is released and another start_xmit is called (possibly - * on another CPU). Without this barrier, the next doorbell can bypass - * this doorbell. This is applicable to IA64/Altix systems. + /* Fence required to flush the write combined buffer, since another + * CPU may write to the same doorbell address and data may be lost + * due to relaxed order nature of write combined bar. */ - mmiowb(); + wmb(); } static int qede_xdp_xmit(struct qede_dev *edev, struct qede_fastpath *fp, -- cgit v1.2.3 From 9137108cc3d64ade13e753108ec611a0daed16a0 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Thu, 22 Mar 2018 14:04:23 -0600 Subject: RDMA/rdma_cm: Fix use after free race with process_one_req process_one_req() can race with rdma_addr_cancel(): CPU0 CPU1 ==== ==== process_one_work() debug_work_deactivate(work); process_one_req() rdma_addr_cancel() mutex_lock(&lock); set_timeout(&req->work,..); __queue_work() debug_work_activate(work); mutex_unlock(&lock); mutex_lock(&lock); [..] list_del(&req->list); mutex_unlock(&lock); [..] // ODEBUG explodes since the work is still queued. kfree(req); Causing ODEBUG to detect the use after free: ODEBUG: free active (active state 0) object type: work_struct hint: process_one_req+0x0/0x6c0 include/net/dst.h:165 WARNING: CPU: 0 PID: 79 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 lib/debugobjects.c:288 kvm: emulating exchange as write Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 79 Comm: kworker/u4:3 Not tainted 4.16.0-rc6+ #361 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ib_addr process_one_req Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x1f4/0x2b0 lib/bug.c:186 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x1b/0x40 arch/x86/entry/entry_64.S:986 RIP: 0010:debug_print_object+0x166/0x220 lib/debugobjects.c:288 RSP: 0000:ffff8801d966f210 EFLAGS: 00010086 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff815acd6e RDX: 0000000000000000 RSI: 1ffff1003b2cddf2 RDI: 0000000000000000 RBP: ffff8801d966f250 R08: 0000000000000000 R09: 1ffff1003b2cddc8 R10: ffffed003b2cde71 R11: ffffffff86f39a98 R12: 0000000000000001 R13: ffffffff86f15540 R14: ffffffff86408700 R15: ffffffff8147c0a0 __debug_check_no_obj_freed lib/debugobjects.c:745 [inline] debug_check_no_obj_freed+0x662/0xf1f lib/debugobjects.c:774 kfree+0xc7/0x260 mm/slab.c:3799 process_one_req+0x2e7/0x6c0 drivers/infiniband/core/addr.c:592 process_one_work+0xc47/0x1bb0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:406 Fixes: 5fff41e1f89d ("IB/core: Fix race condition in resolving IP to MAC") Reported-by: Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/addr.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 9183d148d644..c3e6811bb1bd 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -586,6 +586,15 @@ static void process_one_req(struct work_struct *_work) list_del(&req->list); mutex_unlock(&lock); + /* + * Although the work will normally have been canceled by the + * workqueue, it can still be requeued as long as it is on the + * req_list, so it could have been requeued before we grabbed &lock. + * We need to cancel it after it is removed from req_list to really be + * sure it is safe to free. + */ + cancel_delayed_work(&req->work); + req->callback(req->status, (struct sockaddr *)&req->src_addr, req->addr, req->context); put_client(req->client); -- cgit v1.2.3 From 4b658d1bbc16605330694bb3ef2570c465ef383d Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 25 Mar 2018 11:23:55 +0300 Subject: RDMA/ucma: Check that device is connected prior to access it Add missing check that device is connected prior to access it. [ 55.358652] BUG: KASAN: null-ptr-deref in rdma_init_qp_attr+0x4a/0x2c0 [ 55.359389] Read of size 8 at addr 00000000000000b0 by task qp/618 [ 55.360255] [ 55.360432] CPU: 1 PID: 618 Comm: qp Not tainted 4.16.0-rc1-00071-gcaf61b1b8b88 #91 [ 55.361693] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 55.363264] Call Trace: [ 55.363833] dump_stack+0x5c/0x77 [ 55.364215] kasan_report+0x163/0x380 [ 55.364610] ? rdma_init_qp_attr+0x4a/0x2c0 [ 55.365238] rdma_init_qp_attr+0x4a/0x2c0 [ 55.366410] ucma_init_qp_attr+0x111/0x200 [ 55.366846] ? ucma_notify+0xf0/0xf0 [ 55.367405] ? _get_random_bytes+0xea/0x1b0 [ 55.367846] ? urandom_read+0x2f0/0x2f0 [ 55.368436] ? kmem_cache_alloc_trace+0xd2/0x1e0 [ 55.369104] ? refcount_inc_not_zero+0x9/0x60 [ 55.369583] ? refcount_inc+0x5/0x30 [ 55.370155] ? rdma_create_id+0x215/0x240 [ 55.370937] ? _copy_to_user+0x4f/0x60 [ 55.371620] ? mem_cgroup_commit_charge+0x1f5/0x290 [ 55.372127] ? _copy_from_user+0x5e/0x90 [ 55.372720] ucma_write+0x174/0x1f0 [ 55.373090] ? ucma_close_id+0x40/0x40 [ 55.373805] ? __lru_cache_add+0xa8/0xd0 [ 55.374403] __vfs_write+0xc4/0x350 [ 55.374774] ? kernel_read+0xa0/0xa0 [ 55.375173] ? fsnotify+0x899/0x8f0 [ 55.375544] ? fsnotify_unmount_inodes+0x170/0x170 [ 55.376689] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 55.377522] ? handle_mm_fault+0x174/0x320 [ 55.378169] vfs_write+0xf7/0x280 [ 55.378864] SyS_write+0xa1/0x120 [ 55.379270] ? SyS_read+0x120/0x120 [ 55.379643] ? mm_fault_error+0x180/0x180 [ 55.380071] ? task_work_run+0x7d/0xd0 [ 55.380910] ? __task_pid_nr_ns+0x120/0x140 [ 55.381366] ? SyS_read+0x120/0x120 [ 55.381739] do_syscall_64+0xeb/0x250 [ 55.382143] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 55.382841] RIP: 0033:0x7fc2ef803e99 [ 55.383227] RSP: 002b:00007fffcc5f3be8 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 [ 55.384173] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc2ef803e99 [ 55.386145] RDX: 0000000000000057 RSI: 0000000020000080 RDI: 0000000000000003 [ 55.388418] RBP: 00007fffcc5f3c00 R08: 0000000000000000 R09: 0000000000000000 [ 55.390542] R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000400480 [ 55.392916] R13: 00007fffcc5f3cf0 R14: 0000000000000000 R15: 0000000000000000 [ 55.521088] Code: e5 4d 1e ff 48 89 df 44 0f b6 b3 b8 01 00 00 e8 65 50 1e ff 4c 8b 2b 49 8d bd b0 00 00 00 e8 56 50 1e ff 41 0f b6 c6 48 c1 e0 04 <49> 03 85 b0 00 00 00 48 8d 78 08 48 89 04 24 e8 3a 4f 1e ff 48 [ 55.525980] RIP: rdma_init_qp_attr+0x52/0x2c0 RSP: ffff8801e2c2f9d8 [ 55.532648] CR2: 00000000000000b0 [ 55.534396] ---[ end trace 70cee64090251c0b ]--- Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Fixes: d541e45500bd ("IB/core: Convert ah_attr from OPA to IB when copying to user") Reported-by: Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/ucma.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 60449d611fb4..0811f58c670f 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1166,6 +1166,11 @@ static ssize_t ucma_init_qp_attr(struct ucma_file *file, if (IS_ERR(ctx)) return PTR_ERR(ctx); + if (!ctx->cm_id->device) { + ret = -EINVAL; + goto out; + } + resp.qp_attr_mask = 0; memset(&qp_attr, 0, sizeof qp_attr); qp_attr.qp_state = cmd.qp_state; -- cgit v1.2.3 From c8d3bcbfc5eab3f01cf373d039af725f3b488813 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 25 Mar 2018 11:39:05 +0300 Subject: RDMA/ucma: Check that device exists prior to accessing it Ensure that device exists prior to accessing its properties. Reported-by: Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/ucma.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 0811f58c670f..21585055cf32 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1336,7 +1336,7 @@ static ssize_t ucma_notify(struct ucma_file *file, const char __user *inbuf, { struct rdma_ucm_notify cmd; struct ucma_context *ctx; - int ret; + int ret = -EINVAL; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; @@ -1345,7 +1345,9 @@ static ssize_t ucma_notify(struct ucma_file *file, const char __user *inbuf, if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_notify(ctx->cm_id, (enum ib_event_type) cmd.event); + if (ctx->cm_id->device) + ret = rdma_notify(ctx->cm_id, (enum ib_event_type)cmd.event); + ucma_put_ctx(ctx); return ret; } -- cgit v1.2.3 From 38759d6175d338fbf9282c8ea2b51f3b7ab9bc98 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 26 Mar 2018 16:10:18 +0100 Subject: RDMA/hns: ensure for-loop actually iterates and free's buffers The current for-loop zeros variable i and only loops once, hence not all the buffers are free'd. Fix this by setting i correctly. Detected by CoverityScan, CID#1463415 ("Operands don't affect result") Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08") Signed-off-by: Colin Ian King Reviewed-by: Yixian Liu Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index db2ff352d75f..ec638778661c 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -4383,7 +4383,7 @@ err_dma_alloc_buf: eq->l0_dma = 0; if (mhop_num == 1) - for (i -= i; i >= 0; i--) + for (i -= 1; i >= 0; i--) dma_free_coherent(dev, buf_chk_sz, eq->buf[i], eq->buf_dma[i]); else if (mhop_num == 2) { -- cgit v1.2.3 From 17a1079d9c63579d6e392a526405b8888e9ede37 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Sat, 24 Mar 2018 21:18:35 -0700 Subject: KVM: x86: Fix pv tlb flush dependencies MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PV TLB FLUSH can only be turned on when steal time is enabled. The condition got reversed during conflict resolution. Cc: Paolo Bonzini Cc: Radim Krčmář Signed-off-by: Wanpeng Li Fixes: 4f2f61fc5071 ("KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled") [Rebased on top of kvm/master and reworded the commit message. - Radim] Signed-off-by: Radim Krčmář --- arch/x86/kernel/kvm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index bc1a27280c4b..fae86e36e399 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -546,7 +546,7 @@ static void __init kvm_guest_init(void) } if (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) && - !kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) + kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) pv_mmu_ops.flush_tlb_others = kvm_flush_tlb_others; if (kvm_para_has_feature(KVM_FEATURE_PV_EOI)) @@ -635,7 +635,7 @@ static __init int kvm_setup_pv_tlb_flush(void) int cpu; if (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) && - !kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) { + kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) { for_each_possible_cpu(cpu) { zalloc_cpumask_var_node(per_cpu_ptr(&__pv_tlb_mask, cpu), GFP_KERNEL, cpu_to_node(cpu)); -- cgit v1.2.3 From ef1b204a7024de1a813a7bf7d68c45fac9b9d1a3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 28 Mar 2018 12:52:10 +0000 Subject: drm/tegra: dc: Using NULL instead of plain integer Fixes the following sparse warnings: drivers/gpu/drm/tegra/dc.c:2181:69: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index c1a5ae8faaef..90b25ce363ca 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -2160,7 +2160,7 @@ static int tegra_dc_couple(struct tegra_dc *dc) struct device_link *link; struct device *partner; - partner = driver_find_device(dc->dev->driver, NULL, 0, + partner = driver_find_device(dc->dev->driver, NULL, NULL, tegra_dc_match_by_pipe); if (!partner) return -EPROBE_DEFER; -- cgit v1.2.3 From 84652aefb347297aa08e91e283adf7b18f77c2d5 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 28 Mar 2018 11:27:22 -0700 Subject: RDMA/ucma: Introduce safer rdma_addr_size() variants There are several places in the ucma ABI where userspace can pass in a sockaddr but set the address family to AF_IB. When that happens, rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6, and the ucma kernel code might end up copying past the end of a buffer not sized for a struct sockaddr_ib. Fix this by introducing new variants int rdma_addr_size_in6(struct sockaddr_in6 *addr); int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); that are type-safe for the types used in the ucma ABI and return 0 if the size computed is bigger than the size of the type passed in. We can use these new variants to check what size userspace has passed in before copying any addresses. Reported-by: Signed-off-by: Roland Dreier Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/addr.c | 16 ++++++++++++++++ drivers/infiniband/core/ucma.c | 34 +++++++++++++++++----------------- include/rdma/ib_addr.h | 2 ++ 3 files changed, 35 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index c3e6811bb1bd..cb1d2ab13c66 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -207,6 +207,22 @@ int rdma_addr_size(struct sockaddr *addr) } EXPORT_SYMBOL(rdma_addr_size); +int rdma_addr_size_in6(struct sockaddr_in6 *addr) +{ + int ret = rdma_addr_size((struct sockaddr *) addr); + + return ret <= sizeof(*addr) ? ret : 0; +} +EXPORT_SYMBOL(rdma_addr_size_in6); + +int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr) +{ + int ret = rdma_addr_size((struct sockaddr *) addr); + + return ret <= sizeof(*addr) ? ret : 0; +} +EXPORT_SYMBOL(rdma_addr_size_kss); + static struct rdma_addr_client self; void rdma_addr_register_client(struct rdma_addr_client *client) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 21585055cf32..d933336d7e01 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -632,6 +632,9 @@ static ssize_t ucma_bind_ip(struct ucma_file *file, const char __user *inbuf, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; + if (!rdma_addr_size_in6(&cmd.addr)) + return -EINVAL; + ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); @@ -645,22 +648,21 @@ static ssize_t ucma_bind(struct ucma_file *file, const char __user *inbuf, int in_len, int out_len) { struct rdma_ucm_bind cmd; - struct sockaddr *addr; struct ucma_context *ctx; int ret; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - addr = (struct sockaddr *) &cmd.addr; - if (cmd.reserved || !cmd.addr_size || (cmd.addr_size != rdma_addr_size(addr))) + if (cmd.reserved || !cmd.addr_size || + cmd.addr_size != rdma_addr_size_kss(&cmd.addr)) return -EINVAL; ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_bind_addr(ctx->cm_id, addr); + ret = rdma_bind_addr(ctx->cm_id, (struct sockaddr *) &cmd.addr); ucma_put_ctx(ctx); return ret; } @@ -670,23 +672,22 @@ static ssize_t ucma_resolve_ip(struct ucma_file *file, int in_len, int out_len) { struct rdma_ucm_resolve_ip cmd; - struct sockaddr *src, *dst; struct ucma_context *ctx; int ret; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - src = (struct sockaddr *) &cmd.src_addr; - dst = (struct sockaddr *) &cmd.dst_addr; - if (!rdma_addr_size(src) || !rdma_addr_size(dst)) + if (!rdma_addr_size_in6(&cmd.src_addr) || + !rdma_addr_size_in6(&cmd.dst_addr)) return -EINVAL; ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms); + ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr, + (struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms); ucma_put_ctx(ctx); return ret; } @@ -696,24 +697,23 @@ static ssize_t ucma_resolve_addr(struct ucma_file *file, int in_len, int out_len) { struct rdma_ucm_resolve_addr cmd; - struct sockaddr *src, *dst; struct ucma_context *ctx; int ret; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - src = (struct sockaddr *) &cmd.src_addr; - dst = (struct sockaddr *) &cmd.dst_addr; - if (cmd.reserved || (cmd.src_size && (cmd.src_size != rdma_addr_size(src))) || - !cmd.dst_size || (cmd.dst_size != rdma_addr_size(dst))) + if (cmd.reserved || + (cmd.src_size && (cmd.src_size != rdma_addr_size_kss(&cmd.src_addr))) || + !cmd.dst_size || (cmd.dst_size != rdma_addr_size_kss(&cmd.dst_addr))) return -EINVAL; ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms); + ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr, + (struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms); ucma_put_ctx(ctx); return ret; } @@ -1433,7 +1433,7 @@ static ssize_t ucma_join_ip_multicast(struct ucma_file *file, join_cmd.response = cmd.response; join_cmd.uid = cmd.uid; join_cmd.id = cmd.id; - join_cmd.addr_size = rdma_addr_size((struct sockaddr *) &cmd.addr); + join_cmd.addr_size = rdma_addr_size_in6(&cmd.addr); if (!join_cmd.addr_size) return -EINVAL; @@ -1452,7 +1452,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - if (!rdma_addr_size((struct sockaddr *)&cmd.addr)) + if (!rdma_addr_size_kss(&cmd.addr)) return -EINVAL; return ucma_process_join(file, &cmd, out_len); diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h index d656809f1217..415e09960017 100644 --- a/include/rdma/ib_addr.h +++ b/include/rdma/ib_addr.h @@ -130,6 +130,8 @@ void rdma_copy_addr(struct rdma_dev_addr *dev_addr, const unsigned char *dst_dev_addr); int rdma_addr_size(struct sockaddr *addr); +int rdma_addr_size_in6(struct sockaddr_in6 *addr); +int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); int rdma_addr_find_l2_eth_by_grh(const union ib_gid *sgid, const union ib_gid *dgid, -- cgit v1.2.3 From 880cd276dff17ea29e9a8404275c9502b265afa7 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Wed, 28 Mar 2018 16:00:57 -0700 Subject: mm, slab: memcg_link the SLAB's kmem_cache All the root caches are linked into slab_root_caches which was introduced by the commit 510ded33e075 ("slab: implement slab_root_caches list") but it missed to add the SLAB's kmem_cache. While experimenting with opt-in/opt-out kmem accounting, I noticed system crashes due to NULL dereference inside cache_from_memcg_idx() while deferencing kmem_cache.memcg_params.memcg_caches. The upstream clean kernel will not see these crashes but SLAB should be consistent with SLUB which does linked its boot caches (kmem_cache_node and kmem_cache) into slab_root_caches. Link: http://lkml.kernel.org/r/20180319210020.60289-1-shakeelb@google.com Fixes: 510ded33e075c ("slab: implement slab_root_caches list") Signed-off-by: Shakeel Butt Cc: Tejun Heo Cc: Vladimir Davydov Cc: Greg Thelen Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Johannes Weiner Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/slab.c b/mm/slab.c index 324446621b3e..9095c3945425 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1283,6 +1283,7 @@ void __init kmem_cache_init(void) nr_node_ids * sizeof(struct kmem_cache_node *), SLAB_HWCACHE_ALIGN, 0, 0); list_add(&kmem_cache->list, &slab_caches); + memcg_link_cache(kmem_cache); slab_state = PARTIAL; /* -- cgit v1.2.3 From 3d942ee079b917b24e2a0c5f18d35ac8ec9fee48 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Wed, 28 Mar 2018 16:01:01 -0700 Subject: ipc/shm.c: add split function to shm_vm_ops If System V shmget/shmat operations are used to create a hugetlbfs backed mapping, it is possible to munmap part of the mapping and split the underlying vma such that it is not huge page aligned. This will untimately result in the following BUG: kernel BUG at /build/linux-jWa1Fv/linux-4.15.0/mm/hugetlb.c:3310! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: kcm nfc af_alg caif_socket caif phonet fcrypt CPU: 18 PID: 43243 Comm: trinity-subchil Tainted: G C E 4.15.0-10-generic #11-Ubuntu NIP: c00000000036e764 LR: c00000000036ee48 CTR: 0000000000000009 REGS: c000003fbcdcf810 TRAP: 0700 Tainted: G C E (4.15.0-10-generic) MSR: 9000000000029033 CR: 24002222 XER: 20040000 CFAR: c00000000036ee44 SOFTE: 1 NIP __unmap_hugepage_range+0xa4/0x760 LR __unmap_hugepage_range_final+0x28/0x50 Call Trace: 0x7115e4e00000 (unreliable) __unmap_hugepage_range_final+0x28/0x50 unmap_single_vma+0x11c/0x190 unmap_vmas+0x94/0x140 exit_mmap+0x9c/0x1d0 mmput+0xa8/0x1d0 do_exit+0x360/0xc80 do_group_exit+0x60/0x100 SyS_exit_group+0x24/0x30 system_call+0x58/0x6c ---[ end trace ee88f958a1c62605 ]--- This bug was introduced by commit 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct"). A split function was added to vm_operations_struct to determine if a mapping can be split. This was mostly for device-dax and hugetlbfs mappings which have specific alignment constraints. Mappings initiated via shmget/shmat have their original vm_ops overwritten with shm_vm_ops. shm_vm_ops functions will call back to the original vm_ops if needed. Add such a split function to shm_vm_ops. Link: http://lkml.kernel.org/r/20180321161314.7711-1-mike.kravetz@oracle.com Fixes: 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct") Signed-off-by: Mike Kravetz Reported-by: Laurent Dufour Reviewed-by: Laurent Dufour Tested-by: Laurent Dufour Reviewed-by: Dan Williams Acked-by: Michal Hocko Cc: Davidlohr Bueso Cc: Manfred Spraul Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/shm.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/ipc/shm.c b/ipc/shm.c index 4643865e9171..93e0e3a4d009 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -386,6 +386,17 @@ static int shm_fault(struct vm_fault *vmf) return sfd->vm_ops->fault(vmf); } +static int shm_split(struct vm_area_struct *vma, unsigned long addr) +{ + struct file *file = vma->vm_file; + struct shm_file_data *sfd = shm_file_data(file); + + if (sfd->vm_ops && sfd->vm_ops->split) + return sfd->vm_ops->split(vma, addr); + + return 0; +} + #ifdef CONFIG_NUMA static int shm_set_policy(struct vm_area_struct *vma, struct mempolicy *new) { @@ -510,6 +521,7 @@ static const struct vm_operations_struct shm_vm_ops = { .open = shm_open, /* callback for a new vm-area open */ .close = shm_close, /* callback for when the vm-area is released */ .fault = shm_fault, + .split = shm_split, #if defined(CONFIG_NUMA) .set_policy = shm_set_policy, .get_policy = shm_get_policy, -- cgit v1.2.3 From 299815a4fba9f3c7a81434dba0072148f1690608 Mon Sep 17 00:00:00 2001 From: Maninder Singh Date: Wed, 28 Mar 2018 16:01:05 -0700 Subject: mm/page_owner: fix recursion bug after changing skip entries This patch fixes commit 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries"). Because if we skip first two entries then logic of checking count value as 2 for recursion is broken and code will go in one depth recursion. so we need to check only one call of _RET_IP(__set_page_owner) while checking for recursion. Current Backtrace while checking for recursion:- (save_stack) from (__set_page_owner) // (But recursion returns true here) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) // recursion should return true here (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Correct Backtrace with fix: (save_stack) from (__set_page_owner) // recursion returned true here (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Link: http://lkml.kernel.org/r/1521607043-34670-1-git-send-email-maninder1.s@samsung.com Fixes: 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries") Signed-off-by: Maninder Singh Signed-off-by: Vaneet Narang Acked-by: Vlastimil Babka Cc: Michal Hocko Cc: Oscar Salvador Cc: Greg Kroah-Hartman Cc: Ayush Mittal Cc: Prakash Gupta Cc: Vinayak Menon Cc: Vasyl Gomonovych Cc: Amit Sahrawat Cc: Cc: Vaneet Narang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_owner.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/page_owner.c b/mm/page_owner.c index 9886c6073828..7172e0a80e13 100644 --- a/mm/page_owner.c +++ b/mm/page_owner.c @@ -123,13 +123,13 @@ void __reset_page_owner(struct page *page, unsigned int order) static inline bool check_recursive_alloc(struct stack_trace *trace, unsigned long ip) { - int i, count; + int i; if (!trace->nr_entries) return false; - for (i = 0, count = 0; i < trace->nr_entries; i++) { - if (trace->entries[i] == ip && ++count == 2) + for (i = 0; i < trace->nr_entries; i++) { + if (trace->entries[i] == ip) return true; } -- cgit v1.2.3 From c7f26ccfb2c31eb1bf810ba13d044fcf583232db Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" Date: Wed, 28 Mar 2018 16:01:09 -0700 Subject: mm/vmstat.c: fix vmstat_update() preemption BUG Attempting to hotplug CPUs with CONFIG_VM_EVENT_COUNTERS enabled can cause vmstat_update() to report a BUG due to preemption not being disabled around smp_processor_id(). Discovered on Ubiquiti EdgeRouter Pro with Cavium Octeon II processor. BUG: using smp_processor_id() in preemptible [00000000] code: kworker/1:1/269 caller is vmstat_update+0x50/0xa0 CPU: 0 PID: 269 Comm: kworker/1:1 Not tainted 4.16.0-rc4-Cavium-Octeon-00009-gf83bbd5-dirty #1 Workqueue: mm_percpu_wq vmstat_update Call Trace: show_stack+0x94/0x128 dump_stack+0xa4/0xe0 check_preemption_disabled+0x118/0x120 vmstat_update+0x50/0xa0 process_one_work+0x144/0x348 worker_thread+0x150/0x4b8 kthread+0x110/0x140 ret_from_kernel_thread+0x14/0x1c Link: http://lkml.kernel.org/r/1520881552-25659-1-git-send-email-steven.hill@cavium.com Signed-off-by: Steven J. Hill Reviewed-by: Andrew Morton Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmstat.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/vmstat.c b/mm/vmstat.c index 40b2db6db6b1..33581be705f0 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -1839,9 +1839,11 @@ static void vmstat_update(struct work_struct *w) * to occur in the future. Keep on running the * update worker thread. */ + preempt_disable(); queue_delayed_work_on(smp_processor_id(), mm_percpu_wq, this_cpu_ptr(&vmstat_work), round_jiffies_relative(sysctl_stat_interval)); + preempt_enable(); } } -- cgit v1.2.3 From b213b54fbf9d282dc545252313d727f3972be8e0 Mon Sep 17 00:00:00 2001 From: Honglei Wang Date: Wed, 28 Mar 2018 16:01:12 -0700 Subject: mm/memcontrol.c: fix parameter description mismatch There are a couple of places where parameter description and function name do not match the actual code. Fix it. Link: http://lkml.kernel.org/r/1520843448-17347-1-git-send-email-honglei.wang@oracle.com Signed-off-by: Honglei Wang Acked-by: Tejun Heo Cc: Johannes Weiner Cc: Michal Hocko Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 670e99b68aa6..9ec024b862ac 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -714,9 +714,9 @@ static struct mem_cgroup *get_mem_cgroup_from_mm(struct mm_struct *mm) * invocations for reference counting, or use mem_cgroup_iter_break() * to cancel a hierarchy walk before the round-trip is complete. * - * Reclaimers can specify a zone and a priority level in @reclaim to + * Reclaimers can specify a node and a priority level in @reclaim to * divide up the memcgs in the hierarchy among all concurrent - * reclaimers operating on the same zone and priority. + * reclaimers operating on the same node and priority. */ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, struct mem_cgroup *prev, @@ -2299,7 +2299,7 @@ void memcg_kmem_put_cache(struct kmem_cache *cachep) } /** - * memcg_kmem_charge: charge a kmem page + * memcg_kmem_charge_memcg: charge a kmem page * @page: page to charge * @gfp: reclaim mode * @order: allocation order -- cgit v1.2.3 From 914b6dfff790544d9b77dfd1723adb3745ec9700 Mon Sep 17 00:00:00 2001 From: Vinayak Menon Date: Wed, 28 Mar 2018 16:01:16 -0700 Subject: mm/kmemleak.c: wait for scan completion before disabling free A crash is observed when kmemleak_scan accesses the object->pointer, likely due to the following race. TASK A TASK B TASK C kmemleak_write (with "scan" and NOT "scan=on") kmemleak_scan() create_object kmem_cache_alloc fails kmemleak_disable kmemleak_do_cleanup kmemleak_free_enabled = 0 kfree kmemleak_free bails out (kmemleak_free_enabled is 0) slub frees object->pointer update_checksum crash - object->pointer freed (DEBUG_PAGEALLOC) kmemleak_do_cleanup waits for the scan thread to complete, but not for direct call to kmemleak_scan via kmemleak_write. So add a wait for kmemleak_scan completion before disabling kmemleak_free, and while at it fix the comment on stop_scan_thread. [vinmenon@codeaurora.org: fix stop_scan_thread comment] Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.org Signed-off-by: Vinayak Menon Reviewed-by: Catalin Marinas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/kmemleak.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index e83987c55a08..46c2290a08f1 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1657,8 +1657,7 @@ static void start_scan_thread(void) } /* - * Stop the automatic memory scanning thread. This function must be called - * with the scan_mutex held. + * Stop the automatic memory scanning thread. */ static void stop_scan_thread(void) { @@ -1921,12 +1920,15 @@ static void kmemleak_do_cleanup(struct work_struct *work) { stop_scan_thread(); + mutex_lock(&scan_mutex); /* - * Once the scan thread has stopped, it is safe to no longer track - * object freeing. Ordering of the scan thread stopping and the memory - * accesses below is guaranteed by the kthread_stop() function. + * Once it is made sure that kmemleak_scan has stopped, it is safe to no + * longer track object freeing. Ordering of the scan thread stopping and + * the memory accesses below is guaranteed by the kthread_stop() + * function. */ kmemleak_free_enabled = 0; + mutex_unlock(&scan_mutex); if (!kmemleak_found_leaks) __kmemleak_do_cleanup(); -- cgit v1.2.3 From 5b634e8e387372091cad237b6317b26add734555 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 28 Mar 2018 16:01:19 -0700 Subject: MAINTAINERS: correct rmk's email address Correct my email address in the MAINTAINTERS file. Link: http://lkml.kernel.org/r/E1ezkgi-0002fH-01@rmk-PC.armlinux.org.uk Signed-off-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 73c0cdabf755..08cc4b867bc8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8434,7 +8434,7 @@ S: Orphan F: drivers/net/wireless/marvell/libertas/ MARVELL MACCHIATOBIN SUPPORT -M: Russell King +M: Russell King L: linux-arm-kernel@lists.infradead.org S: Maintained F: arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -8447,7 +8447,7 @@ F: drivers/net/ethernet/marvell/mv643xx_eth.* F: include/linux/mv643xx.h MARVELL MV88X3310 PHY DRIVER -M: Russell King +M: Russell King L: netdev@vger.kernel.org S: Maintained F: drivers/net/phy/marvell10g.c -- cgit v1.2.3 From 18bd49043caa8b272649d4868c29133eb0a3d143 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 28 Mar 2018 16:01:22 -0700 Subject: MAINTAINERS: demote ARM port to "odd fixes" As of the start of 2018, I am no longer paid to support the core 32-bit ARM architecture code. This means that this code is no longer commercially supported, and is now only supported through voluntary effort. I will continue to merge patches as and when able, but this will be at a lower priority than before (which means a longer latency.) I have also be scaled back the amount of time spent reading email, so email that is intended for my attention needs to make itself plainly obvious, or I will miss it. In an attempt to reduce the amount of email Cc'd to me, exclude arch/arm/boot/dts from the maintainers patterns, but add entries for the SolidRun platforms I look after. Link: http://lkml.kernel.org/r/E1ezkgn-0002fO-52@rmk-PC.armlinux.org.uk Signed-off-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 08cc4b867bc8..c2df576114c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1060,41 +1060,42 @@ ARM PORT M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.armlinux.org.uk/ -S: Maintained +S: Odd Fixes T: git git://git.armlinux.org.uk/~rmk/linux-arm.git F: arch/arm/ +X: arch/arm/boot/dts/ ARM PRIMECELL AACI PL041 DRIVER M: Russell King -S: Maintained +S: Odd Fixes F: sound/arm/aaci.* ARM PRIMECELL BUS SUPPORT M: Russell King -S: Maintained +S: Odd Fixes F: drivers/amba/ F: include/linux/amba/bus.h ARM PRIMECELL CLCD PL110 DRIVER M: Russell King -S: Maintained +S: Odd Fixes F: drivers/video/fbdev/amba-clcd.* ARM PRIMECELL KMI PL050 DRIVER M: Russell King -S: Maintained +S: Odd Fixes F: drivers/input/serio/ambakmi.* F: include/linux/amba/kmi.h ARM PRIMECELL MMCI PL180/1 DRIVER M: Russell King -S: Maintained +S: Odd Fixes F: drivers/mmc/host/mmci.* F: include/linux/amba/mmci.h ARM PRIMECELL UART PL010 AND PL011 DRIVERS M: Russell King -S: Maintained +S: Odd Fixes F: drivers/tty/serial/amba-pl01*.c F: include/linux/amba/serial.h @@ -12875,6 +12876,19 @@ S: Maintained F: drivers/net/ethernet/socionext/netsec.c F: Documentation/devicetree/bindings/net/socionext-netsec.txt +SOLIDRUN CLEARFOG SUPPORT +M: Russell King +S: Maintained +F: arch/arm/boot/dts/armada-388-clearfog* +F: arch/arm/boot/dts/armada-38x-solidrun-* + +SOLIDRUN CUBOX-I/HUMMINGBOARD SUPPORT +M: Russell King +S: Maintained +F: arch/arm/boot/dts/imx6*-cubox-i* +F: arch/arm/boot/dts/imx6*-hummingboard* +F: arch/arm/boot/dts/imx6*-sr-* + SONIC NETWORK DRIVER M: Thomas Bogendoerfer L: netdev@vger.kernel.org -- cgit v1.2.3 From 28913ee8191adf4bbc01cbfb9ee18cca782ab141 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 29 Mar 2018 09:24:28 +0900 Subject: netfilter: nf_nat_snmp_basic: add correct dependency to Makefile nf_nat_snmp_basic_main.c includes a generated header, but the necessary dependency is missing in Makefile. This could cause build error in parallel building. Remove a weird line, and add a correct one. Fixes: cc2d58634e0f ("netfilter: nf_nat_snmp_basic: use asn1 decoder library") Reported-by: Stephen Rothwell Signed-off-by: Masahiro Yamada --- net/ipv4/netfilter/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile index 2dad20eefd26..9bd19cd18849 100644 --- a/net/ipv4/netfilter/Makefile +++ b/net/ipv4/netfilter/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o nf_nat_snmp_basic-y := nf_nat_snmp_basic-asn1.o nf_nat_snmp_basic_main.o -nf_nat_snmp_basic-y : nf_nat_snmp_basic-asn1.h nf_nat_snmp_basic-asn1.c +$(obj)/nf_nat_snmp_basic_main.o: $(obj)/nf_nat_snmp_basic-asn1.h obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o clean-files := nf_nat_snmp_basic-asn1.c nf_nat_snmp_basic-asn1.h -- cgit v1.2.3 From 2d2d99ec13f62d5d2cecb6169dfdb6bbe05356d0 Mon Sep 17 00:00:00 2001 From: Raghuram Chary J Date: Tue, 27 Mar 2018 14:51:16 +0530 Subject: lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write) Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by: Andrey Konovalov Signed-off-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 90d176279152..55a78eb96961 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2873,8 +2873,7 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) if (ret < 0) { netdev_warn(dev->net, "lan78xx_setup_irq_domain() failed : %d", ret); - kfree(pdata); - return ret; + goto out1; } dev->net->hard_header_len += TX_OVERHEAD; @@ -2882,14 +2881,32 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) /* Init all registers */ ret = lan78xx_reset(dev); + if (ret) { + netdev_warn(dev->net, "Registers INIT FAILED...."); + goto out2; + } ret = lan78xx_mdio_init(dev); + if (ret) { + netdev_warn(dev->net, "MDIO INIT FAILED....."); + goto out2; + } dev->net->flags |= IFF_MULTICAST; pdata->wol = WAKE_MAGIC; return ret; + +out2: + lan78xx_remove_irq_domain(dev); + +out1: + netdev_warn(dev->net, "Bind routine FAILED"); + cancel_work_sync(&pdata->set_multicast); + cancel_work_sync(&pdata->set_vlan); + kfree(pdata); + return ret; } static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf) @@ -2901,6 +2918,8 @@ static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf) lan78xx_remove_mdio(dev); if (pdata) { + cancel_work_sync(&pdata->set_multicast); + cancel_work_sync(&pdata->set_vlan); netif_dbg(dev, ifdown, dev->net, "free pdata"); kfree(pdata); pdata = NULL; -- cgit v1.2.3 From 5568cdc368c349eee7b5fc48bc956234a0828d71 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 29 Mar 2018 11:42:14 -0400 Subject: ip_tunnel: Resolve ipsec merge conflict properly. We want to use dev_set_mtu() regardless of how we calculate the mtu value. Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index f3db1f35a79d..a7fd1c5a2a14 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -1120,14 +1120,14 @@ int ip_tunnel_newlink(struct net_device *dev, struct nlattr *tb[], if (tb[IFLA_MTU]) { unsigned int max = 0xfff8 - dev->hard_header_len - nt->hlen; - dev->mtu = clamp(dev->mtu, (unsigned int)ETH_MIN_MTU, - (unsigned int)(max - sizeof(struct iphdr))); - } else { - err = dev_set_mtu(dev, mtu); - if (err) - goto err_dev_set_mtu; + mtu = clamp(dev->mtu, (unsigned int)ETH_MIN_MTU, + (unsigned int)(max - sizeof(struct iphdr))); } + err = dev_set_mtu(dev, mtu); + if (err) + goto err_dev_set_mtu; + ip_tunnel_add(itn, nt); return 0; -- cgit v1.2.3 From f03dbb06dc380274e351ca4b1ee1587ed4529e62 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 27 Mar 2018 11:28:48 -0700 Subject: hv_netvsc: enable multicast if necessary My recent change to netvsc drive in how receive flags are handled broke multicast. The Hyper-v/Azure virtual interface there is not a multicast filter list, filtering is only all or none. The driver must enable all multicast if any multicast address is present. Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/rndis_filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index a6ec41c399d6..465c42e30508 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -858,7 +858,7 @@ static void rndis_set_multicast(struct work_struct *w) if (flags & IFF_PROMISC) { filter = NDIS_PACKET_TYPE_PROMISCUOUS; } else { - if (flags & IFF_ALLMULTI) + if (!netdev_mc_empty(rdev->ndev) || (flags & IFF_ALLMULTI)) filter |= NDIS_PACKET_TYPE_ALL_MULTICAST; if (flags & IFF_BROADCAST) filter |= NDIS_PACKET_TYPE_BROADCAST; -- cgit v1.2.3 From 2b1b1b4ac716fd929a2d221bd4ade62263bed915 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 27 Mar 2018 19:01:58 +0200 Subject: mtd: nand: atmel: Fix get_sectorsize() function get_sectorsize() was not using the appropriate macro to extract the ECC sector size from the config cache, which led to buggy ECC when using 1024 byte sectors. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: Reported-by: Olivier Schonken Signed-off-by: Boris Brezillon Reviewed-by: Richard Weinberger Acked-by: Nicolas Ferre Tested-by: Olivier Schonken --- drivers/mtd/nand/atmel/pmecc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c index fcbe4fd6e684..ca0a70389ba9 100644 --- a/drivers/mtd/nand/atmel/pmecc.c +++ b/drivers/mtd/nand/atmel/pmecc.c @@ -426,7 +426,7 @@ static int get_strength(struct atmel_pmecc_user *user) static int get_sectorsize(struct atmel_pmecc_user *user) { - return user->cache.cfg & PMECC_LOOKUP_TABLE_SIZE_1024 ? 1024 : 512; + return user->cache.cfg & PMECC_CFG_SECTOR1024 ? 1024 : 512; } static void atmel_pmecc_gen_syndrome(struct atmel_pmecc_user *user, int sector) -- cgit v1.2.3 From 87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 3 Mar 2018 23:29:03 +0100 Subject: mtd: jedec_probe: Fix crash in jedec_read_mfr() It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: Signed-off-by: Linus Walleij Signed-off-by: Boris Brezillon --- drivers/mtd/chips/jedec_probe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 7c0b27d132b1..b479bd81120b 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1889,6 +1889,8 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base, do { uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi); mask = (1 << (cfi->device_type * 8)) - 1; + if (ofs >= map->size) + return 0; result = map_read(map, base + ofs); bank++; } while ((result.x[0] & mask) == CFI_MFR_CONTINUATION); -- cgit v1.2.3 From 58f101bf87e32753342a6924772c6ebb0fbde24a Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 28 Mar 2018 03:35:52 -0700 Subject: qede: Do not drop rx-checksum invalidated packets. Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by: Ariel Elior Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_fp.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c index 2e921cab1792..14941303189d 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_fp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c @@ -1247,16 +1247,10 @@ static int qede_rx_process_cqe(struct qede_dev *edev, csum_flag = qede_check_csum(parse_flag); if (unlikely(csum_flag == QEDE_CSUM_ERROR)) { - if (qede_pkt_is_ip_fragmented(fp_cqe, parse_flag)) { + if (qede_pkt_is_ip_fragmented(fp_cqe, parse_flag)) rxq->rx_ip_frags++; - } else { - DP_NOTICE(edev, - "CQE has error, flags = %x, dropping incoming packet\n", - parse_flag); + else rxq->rx_hw_errors++; - qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num); - return 0; - } } /* Basic validation passed; Need to prepare an SKB. This would also -- cgit v1.2.3 From d65026c6c62e7d9616c8ceb5a53b68bcdc050525 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 29 Mar 2018 16:00:04 +0800 Subject: vhost: validate log when IOTLB is enabled Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/vhost.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 5d5a9d9e66d3..5320039671b7 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1244,14 +1244,12 @@ static int vq_log_access_ok(struct vhost_virtqueue *vq, /* Caller should have vq mutex and device mutex */ int vhost_vq_access_ok(struct vhost_virtqueue *vq) { - if (vq->iotlb) { - /* When device IOTLB was used, the access validation - * will be validated during prefetching. - */ - return 1; - } - return vq_access_ok(vq, vq->num, vq->desc, vq->avail, vq->used) && - vq_log_access_ok(vq, vq->log_base); + int ret = vq_log_access_ok(vq, vq->log_base); + + if (ret || vq->iotlb) + return ret; + + return vq_access_ok(vq, vq->num, vq->desc, vq->avail, vq->used); } EXPORT_SYMBOL_GPL(vhost_vq_access_ok); -- cgit v1.2.3 From e457edf0b21c873be827b7c2f6b8e1545485c415 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 29 Mar 2018 11:50:10 -0400 Subject: dm mpath: fix support for loading scsi_dh modules during table load The ability to have multipath dynamically attach a scsi_dh, that the user specified in the multipath table, was broken by commit e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue"). Restore the ability to load, and attach, a particular scsi_dh module if one is specified (as noticed by checking m->hw_handler_name). Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue") Reported-by: Paul Mackerras Signed-off-by: Mike Snitzer --- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index a05a560d3cba..a6b7baf31cdd 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -887,7 +887,7 @@ static struct pgpath *parse_path(struct dm_arg_set *as, struct path_selector *ps q = bdev_get_queue(p->path.dev->bdev); attached_handler_name = scsi_dh_attached_handler_name(q, GFP_KERNEL); - if (attached_handler_name) { + if (attached_handler_name || m->hw_handler_name) { INIT_DELAYED_WORK(&p->activate_path, activate_path_work); r = setup_scsi_dh(p->path.dev->bdev, m, attached_handler_name, &ti->error); if (r) { -- cgit v1.2.3 From da5dadb4f11660ca67580cd4a7420161266d6254 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 29 Mar 2018 23:31:32 -0400 Subject: dm: fix dropped return code from dm_get_bdev_for_ioctl dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") reused the variable 'r' to store the return from blkdev_get() that follows prepare_ioctl() -- whereby dropping prepare_ioctl()'s result on the floor. This can lead to an ioctl or persistent reservation being issued to a partition going unnoticed, which implies the extra permission check for CAP_SYS_RAWIO is skipped. Fix this by using a different variable to store blkdev_get()'s return. Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") Reported-by: Alasdair G Kergon Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 45328d8b2859..353ea0ede091 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -466,7 +466,7 @@ static int dm_get_bdev_for_ioctl(struct mapped_device *md, { struct dm_target *tgt; struct dm_table *map; - int srcu_idx, r; + int srcu_idx, r, r2; retry: r = -ENOTTY; @@ -492,9 +492,11 @@ retry: goto out; bdgrab(*bdev); - r = blkdev_get(*bdev, *mode, _dm_claim_ptr); - if (r < 0) + r2 = blkdev_get(*bdev, *mode, _dm_claim_ptr); + if (r2 < 0) { + r = r2; goto out; + } dm_put_live_table(md, srcu_idx); return r; -- cgit v1.2.3 From 85784f9395987a422fa04263e7c0fb13da11eb5c Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 16 Mar 2018 11:22:29 +0800 Subject: ceph: only dirty ITER_IOVEC pages for direct read If a page is already locked, attempting to dirty it leads to a deadlock in lock_page(). This is what currently happens to ITER_BVEC pages when a dio-enabled loop device is backed by ceph: $ losetup --direct-io /dev/loop0 /mnt/cephfs/img $ xfs_io -c 'pread 0 4k' /dev/loop0 Follow other file systems and only dirty ITER_IOVEC pages. Cc: stable@kernel.org Signed-off-by: "Yan, Zheng" Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- fs/ceph/file.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 6639926eed4e..b67eec3532a1 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -640,7 +640,8 @@ static ssize_t ceph_sync_read(struct kiocb *iocb, struct iov_iter *to, struct ceph_aio_request { struct kiocb *iocb; size_t total_len; - int write; + bool write; + bool should_dirty; int error; struct list_head osd_reqs; unsigned num_reqs; @@ -750,7 +751,7 @@ static void ceph_aio_complete_req(struct ceph_osd_request *req) } } - ceph_put_page_vector(osd_data->pages, num_pages, !aio_req->write); + ceph_put_page_vector(osd_data->pages, num_pages, aio_req->should_dirty); ceph_osdc_put_request(req); if (rc < 0) @@ -847,6 +848,7 @@ ceph_direct_read_write(struct kiocb *iocb, struct iov_iter *iter, size_t count = iov_iter_count(iter); loff_t pos = iocb->ki_pos; bool write = iov_iter_rw(iter) == WRITE; + bool should_dirty = !write && iter_is_iovec(iter); if (write && ceph_snap(file_inode(file)) != CEPH_NOSNAP) return -EROFS; @@ -914,6 +916,7 @@ ceph_direct_read_write(struct kiocb *iocb, struct iov_iter *iter, if (aio_req) { aio_req->iocb = iocb; aio_req->write = write; + aio_req->should_dirty = should_dirty; INIT_LIST_HEAD(&aio_req->osd_reqs); if (write) { aio_req->mtime = mtime; @@ -971,7 +974,7 @@ ceph_direct_read_write(struct kiocb *iocb, struct iov_iter *iter, len = ret; } - ceph_put_page_vector(pages, num_pages, !write); + ceph_put_page_vector(pages, num_pages, should_dirty); ceph_osdc_put_request(req); if (ret < 0) -- cgit v1.2.3 From a9645b273e22662ebea563eae334eb3e4fc6614e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 29 Mar 2018 00:18:53 +0100 Subject: atm: iphase: fix spelling mistake: "Receiverd" -> "Received" Trivial fix to spelling mistake in message text Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 98a3a43484c8..44abb8a0a5e5 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -3147,7 +3147,7 @@ static int ia_proc_read(struct atm_dev *dev,loff_t *pos,char *page) " Size of Tx Buffer : %u\n" " Number of Rx Buffer: %u\n" " Size of Rx Buffer : %u\n" - " Packets Receiverd : %u\n" + " Packets Received : %u\n" " Packets Transmitted: %u\n" " Cells Received : %u\n" " Cells Transmitted : %u\n" -- cgit v1.2.3 From ae4745730cf8e693d354ccd4dbaf59ea440c09a9 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Mar 2018 19:05:29 +0900 Subject: net: Fix untag for vlan packets without ethernet header In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol, and skb_vlan_untag() attempts to untag such packets. skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it) however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed and triggered crash. ==== BUG: unable to handle kernel paging request at ffff8801cccb8000 IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101 Oops: 000b [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287 RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2 RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000 RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899 R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4 R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40 FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: memmove include/linux/string.h:360 [inline] skb_reorder_vlan_header net/core/skbuff.c:5031 [inline] skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701 netif_receive_skb+0xae/0x390 net/core/dev.c:4725 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454879 RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879 RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000 Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20 RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28 CR2: ffff8801cccb8000 ==== We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Fixes: 4bbb3e0e8239 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off") Reported-by: Eric Dumazet Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- net/core/skbuff.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 1e7acdc30732..857e4e6f751a 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -5028,8 +5028,10 @@ static struct sk_buff *skb_reorder_vlan_header(struct sk_buff *skb) } mac_len = skb->data - skb_mac_header(skb); - memmove(skb_mac_header(skb) + VLAN_HLEN, skb_mac_header(skb), - mac_len - VLAN_HLEN - ETH_TLEN); + if (likely(mac_len > VLAN_HLEN + ETH_TLEN)) { + memmove(skb_mac_header(skb) + VLAN_HLEN, skb_mac_header(skb), + mac_len - VLAN_HLEN - ETH_TLEN); + } skb->mac_header += VLAN_HLEN; return skb; } -- cgit v1.2.3 From c769accdf3d8a103940bea2979b65556718567e9 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 29 Mar 2018 19:05:30 +0900 Subject: vlan: Fix vlan insertion for packets without ethernet header In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol. When we have a vlan device with reorder_hdr disabled on top of the tun device, such packets from tun devices are untagged in skb_vlan_untag() and vlan headers will be inserted back in vlan_insert_inner_tag(). vlan_insert_inner_tag() however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed. We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Also don't write vlan protocol in skb->data when it does not have enough room for it. Fixes: cbe7128c4b92 ("vlan: Fix out of order vlan headers with reorder header off") Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- include/linux/if_vlan.h | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index c4a1cff9c768..7d30892da064 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -323,13 +323,24 @@ static inline int __vlan_insert_inner_tag(struct sk_buff *skb, skb_push(skb, VLAN_HLEN); /* Move the mac header sans proto to the beginning of the new header. */ - memmove(skb->data, skb->data + VLAN_HLEN, mac_len - ETH_TLEN); + if (likely(mac_len > ETH_TLEN)) + memmove(skb->data, skb->data + VLAN_HLEN, mac_len - ETH_TLEN); skb->mac_header -= VLAN_HLEN; veth = (struct vlan_ethhdr *)(skb->data + mac_len - ETH_HLEN); /* first, the ethernet type */ - veth->h_vlan_proto = vlan_proto; + if (likely(mac_len >= ETH_TLEN)) { + /* h_vlan_encapsulated_proto should already be populated, and + * skb->data has space for h_vlan_proto + */ + veth->h_vlan_proto = vlan_proto; + } else { + /* h_vlan_encapsulated_proto should not be populated, and + * skb->data has no space for h_vlan_proto + */ + veth->h_vlan_encapsulated_proto = skb->protocol; + } /* now, the TCI */ veth->h_vlan_TCI = htons(vlan_tci); -- cgit v1.2.3 From f97c3dc3c0e8d23a5c4357d182afeef4c67f5c33 Mon Sep 17 00:00:00 2001 From: Tal Gilboa Date: Thu, 29 Mar 2018 13:53:52 +0300 Subject: net/dim: Fix int overflow When calculating difference between samples, the values are multiplied by 100. Large values may cause int overflow when multiplied (usually on first iteration). Fixed by forcing 100 to be of type unsigned long. Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Signed-off-by: Tal Gilboa Reviewed-by: Andy Gospodarek Signed-off-by: David S. Miller --- include/linux/net_dim.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/net_dim.h b/include/linux/net_dim.h index bebeaad897cc..29ed8fd6379a 100644 --- a/include/linux/net_dim.h +++ b/include/linux/net_dim.h @@ -231,7 +231,7 @@ static inline void net_dim_exit_parking(struct net_dim *dim) } #define IS_SIGNIFICANT_DIFF(val, ref) \ - (((100 * abs((val) - (ref))) / (ref)) > 10) /* more than 10% difference */ + (((100UL * abs((val) - (ref))) / (ref)) > 10) /* more than 10% difference */ static inline int net_dim_stats_compare(struct net_dim_stats *curr, struct net_dim_stats *prev) -- cgit v1.2.3 From 5807b22c9164a21cd1077a9bc587f0bba361f72d Mon Sep 17 00:00:00 2001 From: David Lebrun Date: Thu, 29 Mar 2018 17:59:36 +0100 Subject: ipv6: sr: fix seg6 encap performances with TSO enabled Enabling TSO can lead to abysmal performances when using seg6 in encap mode, such as with the ixgbe driver. This patch adds a call to iptunnel_handle_offloads() to remove the encapsulation bit if needed. Before: root@comp4-seg6bpf:~# iperf3 -c fc00::55 Connecting to host fc00::55, port 5201 [ 4] local fc45::4 port 36592 connected to fc00::55 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 196 KBytes 1.60 Mbits/sec 47 6.66 KBytes [ 4] 1.00-2.00 sec 304 KBytes 2.49 Mbits/sec 100 5.33 KBytes [ 4] 2.00-3.00 sec 284 KBytes 2.32 Mbits/sec 92 5.33 KBytes After: root@comp4-seg6bpf:~# iperf3 -c fc00::55 Connecting to host fc00::55, port 5201 [ 4] local fc45::4 port 43062 connected to fc00::55 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 1.03 GBytes 8.89 Gbits/sec 0 743 KBytes [ 4] 1.00-2.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes [ 4] 2.00-3.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes Reported-by: Tom Herbert Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: David Lebrun Signed-off-by: David S. Miller --- net/ipv6/seg6_iptunnel.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c index 7a78dcfda68a..f343e6f0fc95 100644 --- a/net/ipv6/seg6_iptunnel.c +++ b/net/ipv6/seg6_iptunnel.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -211,11 +212,6 @@ static int seg6_do_srh(struct sk_buff *skb) tinfo = seg6_encap_lwtunnel(dst->lwtstate); - if (likely(!skb->encapsulation)) { - skb_reset_inner_headers(skb); - skb->encapsulation = 1; - } - switch (tinfo->mode) { case SEG6_IPTUN_MODE_INLINE: if (skb->protocol != htons(ETH_P_IPV6)) @@ -224,10 +220,12 @@ static int seg6_do_srh(struct sk_buff *skb) err = seg6_do_srh_inline(skb, tinfo->srh); if (err) return err; - - skb_reset_inner_headers(skb); break; case SEG6_IPTUN_MODE_ENCAP: + err = iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6); + if (err) + return err; + if (skb->protocol == htons(ETH_P_IPV6)) proto = IPPROTO_IPV6; else if (skb->protocol == htons(ETH_P_IP)) @@ -239,6 +237,8 @@ static int seg6_do_srh(struct sk_buff *skb) if (err) return err; + skb_set_inner_transport_header(skb, skb_transport_offset(skb)); + skb_set_inner_protocol(skb, skb->protocol); skb->protocol = htons(ETH_P_IPV6); break; case SEG6_IPTUN_MODE_L2ENCAP: @@ -262,8 +262,6 @@ static int seg6_do_srh(struct sk_buff *skb) ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr)); skb_set_transport_header(skb, sizeof(struct ipv6hdr)); - skb_set_inner_protocol(skb, skb->protocol); - return 0; } -- cgit v1.2.3 From 82dd0d2a9a76fc8fa2b18d80b987d455728bf83a Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 29 Mar 2018 12:49:52 -0700 Subject: vrf: Fix use after free and double free in vrf_finish_output Miguel reported an skb use after free / double free in vrf_finish_output when neigh_output returns an error. The vrf driver should return after the call to neigh_output as it takes over the skb on error path as well. Patch is a simplified version of Miguel's patch which was written for 4.9, and updated to top of tree. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Signed-off-by: Miguel Fadon Perlines Signed-off-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 139c61c8244a..ac40924fe437 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -578,12 +578,13 @@ static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *s if (!IS_ERR(neigh)) { sock_confirm_neigh(skb, neigh); ret = neigh_output(neigh, skb); + rcu_read_unlock_bh(); + return ret; } rcu_read_unlock_bh(); err: - if (unlikely(ret < 0)) - vrf_tx_error(skb->dev, skb); + vrf_tx_error(skb->dev, skb); return ret; } -- cgit v1.2.3 From b6cdbc85234b072340b8923e69f49ec293f905dc Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 29 Mar 2018 17:44:57 -0700 Subject: net/ipv6: Fix route leaking between VRFs Donald reported that IPv6 route leaking between VRFs is not working. The root cause is the strict argument in the call to rt6_lookup when validating the nexthop spec. ip6_route_check_nh validates the gateway and device (if given) of a route spec. It in turn could call rt6_lookup (e.g., lookup in a given table did not succeed so it falls back to a full lookup) and if so sets the strict argument to 1. That means if the egress device is given, the route lookup needs to return a result with the same device. This strict requirement does not work with VRFs (IPv4 or IPv6) because the oif in the flow struct is overridden with the index of the VRF device to trigger a match on the l3mdev rule and force the lookup to its table. The right long term solution is to add an l3mdev index to the flow struct such that the oif is not overridden. That solution will not backport well, so this patch aims for a simpler solution to relax the strict argument if the route spec device is an l3mdev slave. As done in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the RT6_LOOKUP_F_IFACE flag needs to be removed. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Reported-by: Donald Sharp Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index b33d057ac5eb..fc74352fac12 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -919,6 +919,9 @@ static struct rt6_info *ip6_pol_route_lookup(struct net *net, struct rt6_info *rt, *rt_cache; struct fib6_node *fn; + if (fl6->flowi6_flags & FLOWI_FLAG_SKIP_NH_OIF) + flags &= ~RT6_LOOKUP_F_IFACE; + rcu_read_lock(); fn = fib6_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr); restart: -- cgit v1.2.3 From e81b5e01c14add8395dfba7130f8829206bb507d Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Fri, 30 Mar 2018 12:05:31 +0200 Subject: net: mvneta: fix enable of all initialized RXQs In mvneta_port_up() we enable relevant RX and TX port queues by write queues bit map to an appropriate register. q_map must be ZERO in the beginning of this process. Signed-off-by: Yelena Krivosheev Signed-off-by: Gregory CLEMENT Acked-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 25e9a551cc8c..3f6fb635738c 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1132,6 +1132,7 @@ static void mvneta_port_up(struct mvneta_port *pp) } mvreg_write(pp, MVNETA_TXQ_CMD, q_map); + q_map = 0; /* Enable all initialized RXQs. */ for (queue = 0; queue < rxq_number; queue++) { struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; -- cgit v1.2.3