From 5cf231a346fb80d7945aa46e90186a068a3a001b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 14 Jul 2011 11:55:35 -0700 Subject: hwmon: (pmbus/adm1275) Add support for ADM1276 ADM1276 is mostly compatible to ADM1275, with added support for input power measurement. Add support for it to the ADM1275 driver. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- Documentation/hwmon/adm1275 | 32 +++++++++++++---------- drivers/hwmon/pmbus/Kconfig | 5 ++-- drivers/hwmon/pmbus/adm1275.c | 59 +++++++++++++++++++++++++++++++++++++------ 3 files changed, 72 insertions(+), 24 deletions(-) diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index c438c98bdbc8..ab70d96d2dfd 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -6,6 +6,10 @@ Supported chips: Prefix: 'adm1275' Addresses scanned: - Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf + * Analog Devices ADM1276 + Prefix: 'adm1276' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf Author: Guenter Roeck @@ -13,13 +17,13 @@ Author: Guenter Roeck Description ----------- -This driver supports hardware montoring for Analog Devices ADM1275 Hot-Swap -Controller and Digital Power Monitor. +This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276 +Hot-Swap Controller and Digital Power Monitor. -The ADM1275 is a hot-swap controller that allows a circuit board to be removed -from or inserted into a live backplane. It also features current and voltage -readback via an integrated 12-bit analog-to-digital converter (ADC), accessed -using a PMBus. interface. +ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be +removed from or inserted into a live backplane. They also feature current and +voltage readback via an integrated 12-bit analog-to-digital converter (ADC), +accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -48,18 +52,18 @@ attributes are write-only, all other attributes are read-only. in1_label "vin1" or "vout1" depending on chip variant and configuration. -in1_input Measured voltage. From READ_VOUT register. -in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. -in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. -in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in1_input Measured voltage. +in1_min Minumum Voltage. +in1_max Maximum voltage. +in1_min_alarm Voltage low alarm. +in1_max_alarm Voltage high alarm. in1_highest Historical maximum voltage. in1_reset_history Write any value to reset history. curr1_label "iout1" -curr1_input Measured current. From READ_IOUT register. -curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register. +curr1_input Measured current. +curr1_max Maximum current. +curr1_max_alarm Current high alarm. curr1_lcrit Critical minimum current. Depending on the chip configuration, either curr1_lcrit or curr1_crit is supported, but not both. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index c9237b9dcff2..37575582e51a 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -26,11 +26,12 @@ config SENSORS_PMBUS be called pmbus. config SENSORS_ADM1275 - tristate "Analog Devices ADM1275" + tristate "Analog Devices ADM1275 and compatibles" default n help If you say yes here you get hardware monitoring support for Analog - Devices ADM1275 Hot-Swap Controller and Digital Power Monitor. + Devices ADM1275 and ADM1276 Hot-Swap Controller and Digital Power + Monitor. This driver can also be built as a module. If so, the module will be called adm1275. diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index 7a9f2d9dbba4..fa1811274c27 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -23,6 +23,8 @@ #include #include "pmbus.h" +enum chips { adm1275, adm1276 }; + #define ADM1275_PEAK_IOUT 0xd0 #define ADM1275_PEAK_VIN 0xd1 #define ADM1275_PEAK_VOUT 0xd2 @@ -36,9 +38,12 @@ #define ADM1275_IOUT_WARN2_SELECT (1 << 4) +#define ADM1276_PEAK_PIN 0xda + #define ADM1275_MFR_STATUS_IOUT_WARN2 (1 << 0) struct adm1275_data { + int id; bool have_oc_fault; struct pmbus_driver_info info; }; @@ -49,7 +54,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); const struct adm1275_data *data = to_adm1275_data(info); - int ret; + int ret = 0; if (page) return -ENXIO; @@ -78,10 +83,20 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) case PMBUS_VIRT_READ_VIN_MAX: ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN); break; + case PMBUS_VIRT_READ_PIN_MAX: + if (data->id != adm1276) { + ret = -ENXIO; + break; + } + ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN); + break; case PMBUS_VIRT_RESET_IOUT_HISTORY: case PMBUS_VIRT_RESET_VOUT_HISTORY: case PMBUS_VIRT_RESET_VIN_HISTORY: - ret = 0; + break; + case PMBUS_VIRT_RESET_PIN_HISTORY: + if (data->id != adm1276) + ret = -ENXIO; break; default: ret = -ENODATA; @@ -113,6 +128,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, case PMBUS_VIRT_RESET_VIN_HISTORY: ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0); break; + case PMBUS_VIRT_RESET_PIN_HISTORY: + ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0); + break; default: ret = -ENODATA; break; @@ -180,6 +198,7 @@ static int adm1275_probe(struct i2c_client *client, goto err_mem; } + data->id = id->driver_data; info = &data->info; info->pages = 1; @@ -214,10 +233,33 @@ static int adm1275_probe(struct i2c_client *client, if (device_config & ADM1275_IOUT_WARN2_SELECT) data->have_oc_fault = true; - if (config & ADM1275_VIN_VOUT_SELECT) - info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; - else - info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; + switch (id->driver_data) { + case adm1275: + if (config & ADM1275_VIN_VOUT_SELECT) + info->func[0] |= + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + else + info->func[0] |= + PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; + break; + case adm1276: + info->format[PSC_POWER] = direct; + info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN + | PMBUS_HAVE_STATUS_INPUT; + if (config & ADM1275_VIN_VOUT_SELECT) + info->func[0] |= + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + if (config & ADM1275_VRANGE) { + info->m[PSC_POWER] = 6043; + info->b[PSC_POWER] = 0; + info->R[PSC_POWER] = -2; + } else { + info->m[PSC_POWER] = 2115; + info->b[PSC_POWER] = 0; + info->R[PSC_POWER] = -1; + } + break; + } ret = pmbus_do_probe(client, id, info); if (ret) @@ -240,7 +282,8 @@ static int adm1275_remove(struct i2c_client *client) } static const struct i2c_device_id adm1275_id[] = { - {"adm1275", 0}, + { "adm1275", adm1275 }, + { "adm1276", adm1276 }, { } }; MODULE_DEVICE_TABLE(i2c, adm1275_id); @@ -265,7 +308,7 @@ static void __exit adm1275_exit(void) } MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275"); +MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles"); MODULE_LICENSE("GPL"); module_init(adm1275_init); module_exit(adm1275_exit); -- cgit v1.2.3