From 2b9e68f728d6b2cf38b252650f017576e8dae2ad Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 6 Jul 2007 19:21:22 -0400 Subject: [libata] pata_sil680: Add MMIO support This patch adds MMIO support to the pata_sil680 for taskfile IOs, based on what the old siimage does. I haven't bothered changing the chip setup stuff from PCI config cycles to MMIO though (siimage does it), I don't think it matters, I've only adapted it to use MMIO for taskfile accesses. I've tested it on a Cell blade and it seems to work fine. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jeff Garzik --- drivers/ata/pata_sil680.c | 61 +++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 57 insertions(+), 4 deletions(-) diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 2eb75cd74a96..4dc2e73298fd 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -279,7 +279,7 @@ static struct ata_port_operations sil680_port_ops = { * Returns the final clock settings. */ -static u8 sil680_init_chip(struct pci_dev *pdev) +static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) { u32 class_rev = 0; u8 tmpbyte = 0; @@ -297,6 +297,8 @@ static u8 sil680_init_chip(struct pci_dev *pdev) dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n", tmpbyte & 1, tmpbyte & 0x30); + *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5); + switch(tmpbyte & 0x30) { case 0x00: /* 133 clock attempt to force it on */ @@ -361,25 +363,76 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, }; const struct ata_port_info *ppi[] = { &info, NULL }; static int printed_version; + struct ata_host *host; + void __iomem *mmio_base; + int rc, try_mmio; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - switch(sil680_init_chip(pdev)) - { + switch (sil680_init_chip(pdev, &try_mmio)) { case 0: ppi[0] = &info_slow; break; case 0x30: return -ENODEV; } + + if (!try_mmio) + goto use_ioports; + + /* Try to acquire MMIO resources and fallback to PIO if + * that fails + */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME); + if (rc) + goto use_ioports; + + /* Allocate host and set it up */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + host->iomap = pcim_iomap_table(pdev); + + /* Setup DMA masks */ + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + pci_set_master(pdev); + + /* Get MMIO base and initialize port addresses */ + mmio_base = host->iomap[SIL680_MMIO_BAR]; + host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00; + host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80; + host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a; + host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a; + ata_std_ports(&host->ports[0]->ioaddr); + host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08; + host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0; + host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca; + host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca; + ata_std_ports(&host->ports[1]->ioaddr); + + /* Register & activate */ + return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, + &sil680_sht); + +use_ioports: return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM static int sil680_reinit_one(struct pci_dev *pdev) { - sil680_init_chip(pdev); + int try_mmio; + + sil680_init_chip(pdev, &try_mmio); return ata_pci_device_resume(pdev); } #endif -- cgit v1.2.3