summaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds11-295/+631
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-03-06Merge tag 'acpi-5.1-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are ACPICA updates including ACPI 6.3 support among other things, APEI updates including the ARM Software Delegated Exception Interface (SDEI) support, ACPI EC driver fixes and cleanups and other assorted improvements. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190215 including ACPI 6.3 support and more: * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik Schmauss). * Update of the PCC Identifier structure in PDTT (Erik Schmauss). * Support for new Generic Affinity Structure subtable in SRAT (Erik Schmauss). * New PCC operation region support (Erik Schmauss). * Support for GICC statistical profiling for MADT (Erik Schmauss). * New Error Disconnect Recover notification support (Erik Schmauss). * New PPTT Processor Structure Flags fields support (Erik Schmauss). * ACPI 6.3 HMAT updates (Erik Schmauss). * GTDT Revision 3 support (Erik Schmauss). * Legacy module-level code (MLC) support removal (Erik Schmauss). * Update/clarification of messages for control method failures (Bob Moore). * Warning on creation of a zero-length opregion (Bob Moore). * acpiexec option to dump extra info for memory leaks (Bob Moore). * More ACPI error to firmware error conversions (Bob Moore). * Debugger fix (Bob Moore). * Copyrights update (Bob Moore) - Clean up sleep states support code in ACPICA (Christoph Hellwig) - Rework in_nmi() handling in the APEI code and add suppor for the ARM Software Delegated Exception Interface (SDEI) to it (James Morse) - Fix possible out-of-bounds accesses in BERT-related core (Ross Lagerwall) - Fix the APEI code parsing HEST that includes a Deferred Machine Check subtable (Yazen Ghannam) - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files (YueHaibing) - Switch the APEI ERST code to the new generic UUID API (Andy Shevchenko) - Update the MAINTAINERS entry for APEI (Borislav Petkov) - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui) - Fix DMI checks handling in the ACPI backlight driver and add the "Lunch Box" chassis-type check to it (Hans de Goede) - Add support for using ACPI table overrides included in built-in initrd images (Shunyong Yang) - Update ACPI device enumeration to treat the PWM2 device as "always present" on Lenovo Yoga Book (Yauhen Kharuzhy) - Fix up the enumeration of device objects with the PRP0001 device ID (Andy Shevchenko) - Clean up PPTT parsing error messages (John Garry) - Clean up debugfs files creation handling (Greg Kroah-Hartman, Rafael Wysocki) - Clean up the ACPI DPTF Makefile (Masahiro Yamada)" * tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) ACPI / bus: Respect PRP0001 when retrieving device match data ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book ACPI / video: Extend chassis-type detection with a "Lunch Box" check ..
2019-03-05Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU related changes in this cycle were: - Additional cleanups after RCU flavor consolidation - Grace-period forward-progress cleanups and improvements - Documentation updates - Miscellaneous fixes - spin_is_locked() conversions to lockdep - SPDX changes to RCU source and header files - SRCU updates - Torture-test updates, including nolibc updates and moving nolibc to tools/include" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) locking/locktorture: Convert to SPDX license identifier linux/torture: Convert to SPDX license identifier torture: Convert to SPDX license identifier linux/srcu: Convert to SPDX license identifier linux/rcutree: Convert to SPDX license identifier linux/rcutiny: Convert to SPDX license identifier linux/rcu_sync: Convert to SPDX license identifier linux/rcu_segcblist: Convert to SPDX license identifier linux/rcupdate: Convert to SPDX license identifier linux/rcu_node_tree: Convert to SPDX license identifier rcu/update: Convert to SPDX license identifier rcu/tree: Convert to SPDX license identifier rcu/tiny: Convert to SPDX license identifier rcu/sync: Convert to SPDX license identifier rcu/srcu: Convert to SPDX license identifier rcu/rcutorture: Convert to SPDX license identifier rcu/rcu_segcblist: Convert to SPDX license identifier rcu/rcuperf: Convert to SPDX license identifier rcu/rcu.h: Convert to SPDX license identifier RCU/torture.txt: Remove section MODULE PARAMETERS ...
2019-03-04Merge branch 'acpi-apei'Rafael J. Wysocki1-2/+2
* acpi-apei: (29 commits) efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region MAINTAINERS: Add James Morse to the list of APEI reviewers ACPI / APEI: Add support for the SDEI GHES Notification type firmware: arm_sdei: Add ACPI GHES registration helper ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry() ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length ACPI / APEI: Make GHES estatus header validation more user friendly ACPI / APEI: Pass ghes and estatus separately to avoid a later copy ACPI / APEI: Let the notification helper specify the fixmap slot ACPI / APEI: Move locking to the notification helper arm64: KVM/mm: Move SEA handling behind a single 'claim' interface KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors ACPI / APEI: Generalise the estatus queue's notify code ACPI / APEI: Don't update struct ghes' flags in read/clear estatus ACPI / APEI: Remove spurious GHES_TO_CLEAR check ...
2019-02-28kvm: properly check debugfs dentry before using itGreg Kroah-Hartman1-1/+1
debugfs can now report an error code if something went wrong instead of just NULL. So if the return value is to be used as a "real" dentry, it needs to be checked if it is an error before dereferencing it. This is now happening because of ff9fb72bc077 ("debugfs: return error values, not NULL"). syzbot has found a way to trigger multiple debugfs files attempting to be created, which fails, and then the error code gets passed to dentry_path_raw() which obviously does not like it. Reported-by: Eric Biggers <ebiggers@kernel.org> Reported-and-tested-by: syzbot+7857962b4d45e602b8ad@syzkaller.appspotmail.com Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-22Merge tag 'kvmarm-for-v5.1' of ↵Paolo Bonzini6-237/+566
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/arm updates for Linux v5.1 - A number of pre-nested code rework - Direct physical timer assignment on VHE systems - kvm_call_hyp type safety enforcement - Set/Way cache sanitisation for 32bit guests - Build system cleanups - A bunch of janitorial fixes
2019-02-22KVM: Minor cleanups for kvm_main.cLeo Yan1-2/+1
This patch contains two minor cleanups: firstly it puts exported symbol for kvm_io_bus_write() by following the function definition; secondly it removes a redundant blank line. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-22KVM: arm/arm64: Remove unused timer variableShaokun Zhang1-2/+0
The 'timer' local variable became unused after commit bee038a67487 ("KVM: arm/arm64: Rework the timer code to use a timer_map"). Remove it to avoid [-Wunused-but-set-variable] warning. Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Pouloze <suzuki.poulose@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-20Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"Lan Tianyu1-5/+3
The value of "dirty_bitmap[i]" is already check before setting its value to mask. The following check of "mask" is redundant. The check of "mask" was introduced by commit 58d2930f4ee3 ("KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"), revert it. Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_startNir Weiner1-5/+5
grow_halt_poll_ns() have a strange behaviour in case (vcpu->halt_poll_ns != 0) && (vcpu->halt_poll_ns < halt_poll_ns_grow_start). In this case, vcpu->halt_poll_ns will be multiplied by grow factor (halt_poll_ns_grow) which will require several grow iteration in order to reach a value bigger than halt_poll_ns_grow_start. This means that growing vcpu->halt_poll_ns from value of 0 is slower than growing it from a positive value less than halt_poll_ns_grow_start. Which is misleading and inaccurate. Fix issue by changing grow_halt_poll_ns() to set vcpu->halt_poll_ns to halt_poll_ns_grow_start in any case that (vcpu->halt_poll_ns < halt_poll_ns_grow_start). Regardless if vcpu->halt_poll_ns is 0. use READ_ONCE to get a consistent number for all cases. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Nir Weiner <nir.weiner@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameterNir Weiner1-2/+6
The hard-coded value 10000 in grow_halt_poll_ns() stands for the initial start value when raising up vcpu->halt_poll_ns. It actually sets the first timeout to the first polling session. This value has significant effect on how tolerant we are to outliers. On the standard case, higher value is better - we will spend more time in the polling busyloop, handle events/interrupts faster and result in better performance. But on outliers it puts us in a busy loop that does nothing. Even if the shrink factor is zero, we will still waste time on the first iteration. The optimal value changes between different workloads. It depends on outliers rate and polling sessions length. As this value has significant effect on the dynamic halt-polling algorithm, it should be configurable and exposed. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Nir Weiner <nir.weiner@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_nsNir Weiner1-1/+5
grow_halt_poll_ns() have a strange behavior in case (halt_poll_ns_grow == 0) && (vcpu->halt_poll_ns != 0). In this case, vcpu->halt_pol_ns will be set to zero. That results in shrinking instead of growing. Fix issue by changing grow_halt_poll_ns() to not modify vcpu->halt_poll_ns in case halt_poll_ns_grow is zero Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Nir Weiner <nir.weiner@oracle.com> Suggested-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: Move the memslot update in-progress flag to bit 63Sean Christopherson1-4/+4
...now that KVM won't explode by moving it out of bit 0. Using bit 63 eliminates the need to jump over bit 0, e.g. when calculating a new memslots generation or when propagating the memslots generation to an MMIO spte. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: Remove the hack to trigger memslot generation wraparoundSean Christopherson1-6/+2
x86 captures a subset of the memslot generation (19 bits) in its MMIO sptes so that it can expedite emulated MMIO handling by checking only the releveant spte, i.e. doesn't need to do a full page fault walk. Because the MMIO sptes capture only 19 bits (due to limited space in the sptes), there is a non-zero probability that the MMIO generation could wrap, e.g. after 500k memslot updates. Since normal usage is extremely unlikely to result in 500k memslot updates, a hack was added by commit 69c9ea93eaea ("KVM: MMU: init kvm generation close to mmio wrap-around value") to offset the MMIO generation in order to trigger a wraparound, e.g. after 150 memslot updates. When separate memslot generation sequences were assigned to each address space, commit 00f034a12fdd ("KVM: do not bias the generation number in kvm_current_mmio_generation") moved the offset logic into the initialization of the memslot generation itself so that the per-address space bit(s) were not dropped/corrupted by the MMIO shenanigans. Remove the offset hack for three reasons: - While it does exercise x86's kvm_mmu_invalidate_mmio_sptes(), simply wrapping the generation doesn't actually test the interesting case of having stale MMIO sptes with the new generation number, e.g. old sptes with a generation number of 0. - Triggering kvm_mmu_invalidate_mmio_sptes() prematurely makes its performance rather important since the probability of invalidating MMIO sptes jumps from "effectively never" to "fairly likely". This limits what can be done in future patches, e.g. to simplify the invalidation code, as doing so without proper caution could lead to a noticeable performance regression. - Forcing the memslots generation, which is a 64-bit number, to wrap prevents KVM from assuming the memslots generation will never wrap. This in turn prevents KVM from using an arbitrary bit for the "update in-progress" flag, e.g. using bit 63 would immediately collide with using a large value as the starting generation number. The "update in-progress" flag is effectively forced into bit 0 so that it's (subtly) taken into account when incrementing the generation. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: Explicitly define the "memslot update in-progress" bitSean Christopherson1-13/+13
KVM uses bit 0 of the memslots generation as an "update in-progress" flag, which is used by x86 to prevent caching MMIO access while the memslots are changing. Although the intended behavior is flag-like, e.g. MMIO sptes intentionally drop the in-progress bit so as to avoid caching data from in-flux memslots, the implementation oftentimes treats the bit as part of the generation number itself, e.g. incrementing the generation increments twice, once to set the flag and once to clear it. Prior to commit 4bd518f1598d ("KVM: use separate generations for each address space"), incorporating the "update in-progress" bit into the generation number largely made sense, e.g. "real" generations are even, "bogus" generations are odd, most code doesn't need to be aware of the bit, etc... Now that unique memslots generation numbers are assigned to each address space, stealthing the in-progress status into the generation number results in a wide variety of subtle code, e.g. kvm_create_vm() jumps over bit 0 when initializing the memslots generation without any hint as to why. Explicitly define the flag and convert as much code as possible (which isn't much) to actually treat it like a flag. This paves the way for eventually using a different bit for "update in-progress" so that it can be a flag in truth instead of a awkward extension to the generation number. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: Call kvm_arch_memslots_updated() before updating memslotsSean Christopherson2-3/+6
kvm_arch_memslots_updated() is at this point in time an x86-specific hook for handling MMIO generation wraparound. x86 stashes 19 bits of the memslots generation number in its MMIO sptes in order to avoid full page fault walks for repeat faults on emulated MMIO addresses. Because only 19 bits are used, wrapping the MMIO generation number is possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that the generation has changed so that it can invalidate all MMIO sptes in case the effective MMIO generation has wrapped so as to avoid using a stale spte, e.g. a (very) old spte that was created with generation==0. Given that the purpose of kvm_arch_memslots_updated() is to prevent consuming stale entries, it needs to be called before the new generation is propagated to memslots. Invalidating the MMIO sptes after updating memslots means that there is a window where a vCPU could dereference the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO spte that was created with (pre-wrap) generation==0. Fixes: e59dbe09f8e6 ("KVM: Introduce kvm_arch_memslots_updated()") Cc: <stable@vger.kernel.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20kvm: Add memcg accounting to KVM allocationsBen Gardon5-22/+25
There are many KVM kernel memory allocations which are tied to the life of the VM process and should be charged to the VM process's cgroup. If the allocations aren't tied to the process, the OOM killer will not know that killing the process will free the associated kernel memory. Add __GFP_ACCOUNT flags to many of the allocations which are not yet being charged to the VM process's cgroup. Tested: Ran all kvm-unit-tests on a 64 bit Haswell machine, the patch introduced no new failures. Ran a kernel memory accounting test which creates a VM to touch memory and then checks that the kernel memory allocated for the process is within certain bounds. With this patch we account for much more of the vmalloc and slab memory allocated for the VM. There remain a few allocations which should be charged to the VM's cgroup but are not. In they include: vcpu->run kvm->coalesced_mmio_ring There allocations are unaccounted in this patch because they are mapped to userspace, and accounting them to a cgroup causes problems. This should be addressed in a future patch. Signed-off-by: Ben Gardon <bgardon@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20kvm: Use struct_size() in kmalloc()Gustavo A. R. Silva1-4/+4
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20KVM: arm/arm64: Remove unused gpa_end variableShaokun Zhang1-2/+1
The 'gpa_end' local variable is never used and let's remove it. Cc: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: fix spelling mistake: "auxilary" -> "auxiliary"Colin Ian King1-1/+1
There is a spelling mistake in a kvm_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: Fix TRACE_INCLUDE_PATHMasahiro Yamada1-1/+1
As the comment block in include/trace/define_trace.h says, TRACE_INCLUDE_PATH should be a relative path to the define_trace.h ../../virt/kvm/arm is the correct relative path. ../../../virt/kvm/arm is working by coincidence because the top Makefile adds -I$(srctree)/arch/$(SRCARCH)/include as a header search path, but we should not rely on it. Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: arch_timer: Mark physical interrupt active when a virtual ↵Marc Zyngier1-3/+12
interrupt is pending When a guest gets scheduled, KVM performs a "load" operation, which for the timer includes evaluating the virtual "active" state of the interrupt, and replicating it on the physical side. This ensures that the deactivation in the guest will also take place in the physical GIC distributor. If the interrupt is not yet active, we flag it as inactive on the physical side. This means that on restoring the timer registers, if the timer has expired, we'll immediately take an interrupt. That's absolutely fine, as the interrupt will then be flagged as active on the physical side. What this assumes though is that we'll enter the guest right after having taken the interrupt, and that the guest will quickly ACK the interrupt, making it active at on the virtual side. It turns out that quite often, this assumption doesn't really hold. The guest may be preempted on the back on this interrupt, either from kernel space or whilst running at EL1 when a host interrupt fires. When this happens, we repeat the whole sequence on the next load (interrupt marked as inactive, timer registers restored, interrupt fires). And if it takes a really long time for a guest to activate the interrupt (as it does with nested virt), we end-up with many such events in quick succession, leading to the guest only making very slow progress. This can also be seen with the number of virtual timer interrupt on the host being far greater than the same number in the guest. An easy way to fix this is to evaluate the timer state when performing the "load" operation, just like we do when the interrupt actually fires. If the timer has a pending virtual interrupt at this stage, then we can safely flag the physical interrupt as being active, which prevents spurious exits. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: Move kvm_is_write_fault to header fileChristoffer Dall1-8/+0
Move this little function to the header files for arm/arm64 so other code can make use of it directly. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: Rework the timer code to use a timer_mapChristoffer Dall2-135/+265
We are currently emulating two timers in two different ways. When we add support for nested virtualization in the future, we are going to be emulating either two timers in two diffferent ways, or four timers in a single way. We need a unified data structure to keep track of how we map virtual state to physical state and we need to cleanup some of the timer code to operate more independently on a struct arch_timer_context instead of trying to consider the global state of the VCPU and recomputing all state. Co-written with Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-02-19KVM: arm/arm64: arch_timer: Assign the phys timer on VHE systemsChristoffer Dall1-49/+170
VHE systems don't have to emulate the physical timer, we can simply assign the EL1 physical timer directly to the VM as the host always uses the EL2 timers. In order to minimize the amount of cruft, AArch32 gets definitions for the physical timer too, but is should be generally unused on this architecture. Co-written with Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-02-19KVM: arm/arm64: timer: Rework data structures for multiple timersChristoffer Dall1-28/+30
Prepare for having 4 timer data structures (2 for now). Move loaded to the cpu data structure and not the individual timer structure, in preparation for assigning the EL1 phys timer as well. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: consolidate arch timer trap handlersAndre Przywara1-17/+113
At the moment we have separate system register emulation handlers for each timer register. Actually they are quite similar, and we rely on kvm_arm_timer_[gs]et_reg() for the actual emulation anyways, so let's just merge all of those handlers into one function, which just marshalls the arguments and then hands off to a set of common accessors. This makes extending the emulation to include EL2 timers much easier. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Fixed 32-bit VM breakage and reduced to reworking existing code] Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> [Fixed 32bit host, general cleanup] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm64: Fix ICH_ELRSR_EL2 sysreg namingMarc Zyngier1-1/+1
We previously incorrectly named the define for this system register. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-02-19KVM: arm/arm64: Simplify bg_timer programmingChristoffer Dall2-23/+14
Instead of calling into kvm_timer_[un]schedule from the main kvm blocking path, test if the VCPU is on the wait queue from the load/put path and perform the background timer setup/cancel in this path. This has the distinct advantage that we no longer race between load/put and schedule/unschedule and programming and canceling of the bg_timer always happens when the timer state is not loaded. Note that we must now remove the checks in kvm_timer_blocking that do not schedule a background timer if one of the timers can fire, because we no longer have a guarantee that kvm_vcpu_check_block() will be called before kvm_timer_blocking. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: Factor out VMID into struct kvm_vmidChristoffer Dall2-37/+27
In preparation for nested virtualization where we are going to have more than a single VMID per VM, let's factor out the VMID data into a separate VMID data structure and change the VMID allocator to operate on this new structure instead of using a struct kvm. This also means that udate_vttbr now becomes update_vmid, and that the vttbr itself is generated on the fly based on the stage 2 page table base address and the vmid. We cache the physical address of the pgd when allocating the pgd to avoid doing the calculation on every entry to the guest and to avoid calling into potentially non-hyp-mapped code from hyp/EL2. If we wanted to merge the VMID allocator with the arm64 ASID allocator at some point in the future, it should actually become easier to do that after this patch. Note that to avoid mapping the kvm_vmid_bits variable into hyp, we simply forego the masking of the vmid value in kvm_get_vttbr and rely on update_vmid to always assign a valid vmid value (within the supported range). Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> [maz: minor cleanups] Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19arm/arm64: KVM: Statically configure the host's view of MPIDRMarc Zyngier1-0/+1
We currently eagerly save/restore MPIDR. It turns out to be slightly pointless: - On the host, this value is known as soon as we're scheduled on a physical CPU - In the guest, this value cannot change, as it is set by KVM (and this is a read-only register) The result of the above is that we can perfectly avoid the eager saving of MPIDR_EL1, and only keep the restore. We just have to setup the host contexts appropriately at boot time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-02-19arm/arm64: KVM: Introduce kvm_call_hyp_ret()Marc Zyngier2-3/+3
Until now, we haven't differentiated between HYP calls that have a return value and those who don't. As we're about to change this, introduce kvm_call_hyp_ret(), and change all call sites that actually make use of a return value. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-02-13Merge tag 'kvm-arm-fixes-for-5.0' of ↵Paolo Bonzini12-143/+158
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for 5.0: - Fix the way we reset vcpus, plugging the race that could happen on VHE - Fix potentially inconsistent group setting for private interrupts - Don't generate UNDEF when LORegion feature is present - Relax the restriction on using stage2 PUD huge mapping - Turn some spinlocks into raw_spinlocks to help RT compliance
2019-02-13Merge branch 'rcu-next' of ↵Ingo Molnar1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull the latest RCU tree from Paul E. McKenney: - Additional cleanups after RCU flavor consolidation - Grace-period forward-progress cleanups and improvements - Documentation updates - Miscellaneous fixes - spin_is_locked() conversions to lockdep - SPDX changes to RCU source and header files - SRCU updates - Torture-test updates, including nolibc updates and moving nolibc to tools/include Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-07KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbingJames Morse1-2/+2
To split up APEIs in_nmi() path, the caller needs to always be in_nmi(). KVM shouldn't have to know about this, pull the RAS plumbing out into a header file. Currently guest synchronous external aborts are claimed as RAS notifications by handle_guest_sea(), which is hidden in the arch codes mm/fault.c. 32bit gets a dummy declaration in system_misc.h. There is going to be more of this in the future if/when the kernel supports the SError-based firmware-first notification mechanism and/or kernel-first notifications for both synchronous external abort and SError. Each of these will come with some Kconfig symbols and a handful of header files. Create a header file for all this. This patch gives handle_guest_sea() a 'kvm_' prefix, and moves the declarations to kvm_ras.h as preparation for a future patch that moves the ACPI-specific RAS code out of mm/fault.c. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Tyler Baicar <tbaicar@codeaurora.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-07kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)Jann Horn1-1/+2
kvm_ioctl_create_device() does the following: 1. creates a device that holds a reference to the VM object (with a borrowed reference, the VM's refcount has not been bumped yet) 2. initializes the device 3. transfers the reference to the device to the caller's file descriptor table 4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real reference The ownership transfer in step 3 must not happen before the reference to the VM becomes a proper, non-borrowed reference, which only happens in step 4. After step 3, an attacker can close the file descriptor and drop the borrowed reference, which can cause the refcount of the kvm object to drop to zero. This means that we need to grab a reference for the device before anon_inode_getfd(), otherwise the VM can disappear from under us. Fixes: 852b6d57dc7f ("kvm: add device control API") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-07KVM: arm64: Relax the restriction on using stage2 PUD huge mappingSuzuki K Poulose1-3/+6
We restrict mapping the PUD huge pages in stage2 to only when the stage2 has 4 level page table, leaving the feature unused with the default IPA size. But we could use it even with a 3 level page table, i.e, when the PUD level is folded into PGD, just like the stage1. Relax the condition to allow using the PUD huge page mappings at stage2 when it is possible. Cc: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-07KVM: arm/arm64: vgic: Always initialize the group of private IRQsChristoffer Dall1-8/+14
We currently initialize the group of private IRQs during kvm_vgic_vcpu_init, and the value of the group depends on the GIC model we are emulating. However, CPUs created before creating (and initializing) the VGIC might end up with the wrong group if the VGIC is created as GICv3 later. Since we have no enforced ordering of creating the VGIC and creating VCPUs, we can end up with part the VCPUs being properly intialized and the remaining incorrectly initialized. That also means that we have no single place to do the per-cpu data structure initialization which depends on knowing the emulated GIC model (which is only the group field). This patch removes the incorrect comment from kvm_vgic_vcpu_init and initializes the group of all previously created VCPUs's private interrupts in vgic_init in addition to the existing initialization in kvm_vgic_vcpu_init. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-07arm/arm64: KVM: Allow a VCPU to fully reset itselfMarc Zyngier2-20/+26
The current kvm_psci_vcpu_on implementation will directly try to manipulate the state of the VCPU to reset it. However, since this is not done on the thread that runs the VCPU, we can end up in a strangely corrupted state when the source and target VCPUs are running at the same time. Fix this by factoring out all reset logic from the PSCI implementation and forwarding the required information along with a request to the target VCPU. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-01-25virt/kvm: Replace spin_is_locked() with lockdepPaul E. McKenney1-1/+1
lockdep_assert_held() is better suited to checking locking requirements, since it only checks if the current thread holds the lock regardless of whether someone else does. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: <kvm@vger.kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-24KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlockJulien Thierry2-19/+20
vgic_cpu->ap_list_lock must always be taken with interrupts disabled as it is used in interrupt context. For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-01-24KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlockJulien Thierry3-10/+10
vgic_dist->lpi_list_lock must always be taken with interrupts disabled as it is used in interrupt context. For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-01-24KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlockJulien Thierry9-83/+82
vgic_irq->irq_lock must always be taken with interrupts disabled as it is used in interrupt context. For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-01-11KVM: validate userspace input in kvm_clear_dirty_log_protect()Tomas Bortoli1-2/+7
The function at issue does not fully validate the content of the structure pointed by the log parameter, though its content has just been copied from userspace and lacks validation. Fix that. Moreover, change the type of n to unsigned long as that is the type returned by kvm_dirty_bitmap_bytes(). Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com [Squashed the fix from Paolo. - Radim.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
2019-01-04mm: treewide: remove unused address argument from pte_alloc functionsJoel Fernandes (Google)1-1/+1
Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds1-2/+1
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm/mmu_notifier: use structure for invalidate_range_start/end callbackJérôme Glisse1-9/+5
Patch series "mmu notifier contextual informations", v2. This patchset adds contextual information, why an invalidation is happening, to mmu notifier callback. This is necessary for user of mmu notifier that wish to maintains their own data structure without having to add new fields to struct vm_area_struct (vma). For instance device can have they own page table that mirror the process address space. When a vma is unmap (munmap() syscall) the device driver can free the device page table for the range. Today we do not have any information on why a mmu notifier call back is happening and thus device driver have to assume that it is always an munmap(). This is inefficient at it means that it needs to re-allocate device page table on next page fault and rebuild the whole device driver data structure for the range. Other use case beside munmap() also exist, for instance it is pointless for device driver to invalidate the device page table when the invalidation is for the soft dirtyness tracking. Or device driver can optimize away mprotect() that change the page table permission access for the range. This patchset enables all this optimizations for device drivers. I do not include any of those in this series but another patchset I am posting will leverage this. The patchset is pretty simple from a code point of view. The first two patches consolidate all mmu notifier arguments into a struct so that it is easier to add/change arguments. The last patch adds the contextual information (munmap, protection, soft dirty, clear, ...). This patch (of 3): To avoid having to change many callback definition everytime we want to add a parameter use a structure to group all parameters for the mmu_notifier invalidate_range_start/end callback. No functional changes with this patch. [akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc] Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband] Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-26Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The biggest RCU changes in this cycle were: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) rcutorture: Don't do busted forward-progress testing rcutorture: Use 100ms buckets for forward-progress callback histograms rcutorture: Recover from OOM during forward-progress tests rcutorture: Print forward-progress test age upon failure rcutorture: Print time since GP end upon forward-progress failure rcutorture: Print histogram of CB invocation at OOM time rcutorture: Print GP age upon forward-progress failure rcu: Print per-CPU callback counts for forward-progress failures rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings rcutorture: Dump grace-period diagnostics upon forward-progress OOM rcutorture: Prepare for asynchronous access to rcu_fwd_startat torture: Remove unnecessary "ret" variables rcutorture: Affinity forward-progress test to avoid housekeeping CPUs rcutorture: Break up too-long rcu_torture_fwd_prog() function rcutorture: Remove cbflood facility torture: Bring any extra CPUs online during kernel startup rcutorture: Add call_rcu() flooding forward-progress tests rcutorture/formal: Replace synchronize_sched() with synchronize_rcu() tools/kernel.h: Replace synchronize_sched() with synchronize_rcu() net/decnet: Replace rcu_barrier_bh() with rcu_barrier() ...
2018-12-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-226/+548
Pull KVM updates from Paolo Bonzini: "ARM: - selftests improvements - large PUD support for HugeTLB - single-stepping fixes - improved tracing - various timer and vGIC fixes x86: - Processor Tracing virtualization - STIBP support - some correctness fixes - refactorings and splitting of vmx.c - use the Hyper-V range TLB flush hypercall - reduce order of vcpu struct - WBNOINVD support - do not use -ftrace for __noclone functions - nested guest support for PAUSE filtering on AMD - more Hyper-V enlightenments (direct mode for synthetic timers) PPC: - nested VFIO s390: - bugfixes only this time" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: x86: Add CPUID support for new instruction WBNOINVD kvm: selftests: ucall: fix exit mmio address guessing Revert "compiler-gcc: disable -ftracer for __noclone functions" KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range() KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp() KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte() KVM: Make kvm_set_spte_hva() return int KVM: Replace old tlb flush function with new one to flush a specified range. KVM/MMU: Add tlb flush with range helper function KVM/VMX: Add hv tlb range flush support x86/hyper-v: Add HvFlushGuestAddressList hypercall support KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops KVM: x86: Disable Intel PT when VMXON in L1 guest KVM: x86: Set intercept for Intel PT MSRs read/write KVM: x86: Implement Intel PT MSRs read/write emulation ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 19:07:44 +0000